ABAP Proxy config between PI 7.1 and WAS 6.20

Hi guys,
I'm configuring the Proxy runtime between a PI 7.1 and WAS 6.20 and I'm getting errors at the two last tests of sproxy -> I'm getting - Integration Builder data not understood.
I checked the following:
Everything in sldcheck is ok.
Integration engine configuration as appl sys (LOC).
HTTP connection to IB ok.
No user locked.
SICF services all activated.
The BASIS content imported at PI is 7.10.
Do you know what I'm missing here? Is it possible to do these configs with these releases?
Thanks in advance,
Ricardo.

Hi Ricardo,
I think your Basis component is at lower level, as it is not allowing to go for proxy communication, however for 6.20 and above add-on is not required:
Check with your basis team the following:
The prerequisites to configuration for ABAP Proxy include: (landscape dependent)
1. The business systems should be based on SAP Web AS 6.20 and SAP Web AS 6.20 kernel patch level above 1253
2. You have installed the XI Add-On in each of these business systems as described in the Installation Guide SAP Exchange Infrastructure 3.0
3. The business systems and your central Integration Server are maintained in the System Landscape Directory (SLD).
Sachin
Edited by: Sachin Dhingra on Mar 12, 2009 6:55 PM

Similar Messages

  • ABAP Proxy connection Between PI and SRM for XMLs

    Hello Experts,
    We are trying to set up ABAP proxy connection between PI 7.1 and SRM so we can send XML from SRM into PI.
    Our SRM developer is getting an SLD error (below) and seems like something is not set up right in the SLD. Could you help me out with any kind of blog/documention on setting up an ABAP proxy connection between PI and an ABAP system. Something that talks about what steps we need to take in PI and SRM.
    error ...
    *We saw the error during debugging. This error is preventing XML output
    to be sent to PI.
    BBP_BD  002     An SLD system has not been assigned to logical system
    Thanks,
    Mayur

    Thanks all for a quick reply. I also had to take following step to achieve the task.
    adding the XI system to the SRM config - SRM Server -->
    Technical basic Settings --> Define  System Landscape?  (also please
    associated documentation in that link for XI)
    Thanks,
    Mayur

  • How to make proxy RFC between SAP R/3 and XI

    Hi,
    We have installed XI3.0sr1 with all SP16. Also also added <b>proxy</b> addon in R/3 machine. When i try to execute SPROXY tcode in R/3 , system shows " <b>No connection to Integration Builder</b>"
    Can you please help , how to make RFC connection .
    Thanks
    Chimsik

    Hi,
    Check Exchange Profile Entries of R/3 so that it fetchs data from XI ..it should connect to XI
    Exchange Profile link is -
    http://<R3Server>:5<instance>00/exchangeProfile
    Proxy Prerequisites-
    http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/content.htm
    Check SAP Configuration Guide-
    https://websmp102.sap-ag.de/~sapidb/011000358700001697502004E.PDF
    - Page 27 in this document
    Also check this thread-
    Activating ABAP proxy issue
    Hope this helps,
    REgards,
    Moorthy

  • ABAP Proxy generation descrepencies with filed and method...

    Hello,
    I have two question regarding ABAP Proxies.
    The first one when i regenerate proxy for a interface, It is not generating the same filed as before and my ABAP program fails.
    I have Internal_organization_Descri -- Now, It is not giving same field rather It is giving Internal_organization_Descr
    It is missing 'i'
    One more problem is It is chaging method also
    Previously it was showing "Sales_order_Sync"
    Now, It is showing method as EXECUTE_SYNCHRONOUS
    Why It is these proxies behave differently, is there Service Pack dependency.. What is the best way to avoid these descripencies...Pls help
    Srinivas

    Hi,
    Please find the explantion about your doubts on ABAP Proxy.
    1. The field names might be changed based on the changes in XI in Data type for this field.
    Whenver you will be regenerating the ABAP Proxy, it considers the Message type and internally the Data types that have created in XI. So any changes in these objects may lead to change.
    Verify your field names in XI
    2. The Method to be used to call ABAP proxy is EXECUTE_SYNCHRON for Synchronous communciation and EXECUTE_ASYNCHRONOUS for async communication. These methods are used in ABAP source code. So please let me know where you had find this method "Sales_order_Sync"
    The EXECUTE_SYNCHRON is the proper method.
    Let me know if you need any more info.
    Refer
    ABAP Proxy outbound program - purchase order send
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2boutbound%2bprogram%2b-%2bpurchase%2border%2bsend
    ABAP Proxy inbound program - sales order creation - Community Profiles - Wiki
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2binbound%2bprogram%2b-%2bsales%2border%2bcreation
    Thanks
    Swarup

  • Fault message in asynchronous ABAP Proxy

    Hi,
    I have a question about fault messages in asynchronous ABAP proxy server.
    The configured scenario is SOAP – XI – ABAP Proxy. Between XI and the ABAP Proxy I have configured an inbound asynchronous interface with a fault message, and then I have generated all the classes and implemented some code for exception handling in the ABAP Proxy side successfully.
    When I tested negative cases, the exception raises and it is visible in the SXMB_MONI transaction in the R/3 side, but this exception is not displayed in the SXMB_MONI of XI it just displays a successful delivery to the ABAP Proxy message.
    According the XI documentation it says “<i>In the asynchronous case, you can see a fault message in the monitoring of the Exchange Infrastructure.</i>” But this is not working.
    Am I missing something?

    Hi,
    This parameters are form group RUNTIME.
    Please check it:
    http://help.sap.com/saphelp_nw04/helpdata/en/d6/49543b1e49bc1fe10000000a114084/content.htm
    Regards,
    Wojciech

  • Missing parameter in abap proxy implementing class

    we have a XI 3.0 (DR0) and a XI 7.0 (DR8) systems. We have exported a
    message interface from system DR0 and imported in DR8, then we have
    generated the abap proxy. The problem is in differences between abap
    proxy generated in XI 3.0 and the one generated in XI 7.0. The most
    sostantial difference is in parameters of implementing class where, how
    you can see from attached document, the CONTROLLER parameter is missing.Please, we need a support for this issue.

    maybe this field is not inlcuded in the version u are using (XI 7.0). but this shud not be a show stopper. u can go to the class editor and check out if the req strucutres and fields are present WRT to the I/B and O/B interface.

  • ECC dev to new PI sandbox to be point in ABAP proxy configuration

    Hi All ,
    We are testing ABAP proxy configuration between ECC Dev and PI new system (sand box) .
    FYI : Currently ABAP proxy configuration running fine between ECC DEV and PI DEV system .
    Now we have to testing ABAP proxy configuration between ECC Dev and PI new system (sand box) .
    Pls advise what needs to be done.
    thanks

    Dear All,
    Any relation between SLD and Abap proxy configuration ?
    FYI:
    1,ECC SLD is running fine with PI DEV sysytem (PI7.1).
    2,in ECC SAPSLDAPI RFC destination program id is pointing to PI DEV system .
    3,In Ecc LCRSAPRFC RFC destination program id is pointing to PI DEV system .
    4, PI DEV system is PI7.1
    5, PI Sandbox is PI 7.4 SP06 (note : currently we are testing all the interface , PI scenario in new sand box - it is newly upgraded PI system . )
    6.In ECC SXMB_adm -> Role of Business System -> Application system
    Corresponding Integ. Server -> dest://RFCDESTINATION (H connection type RFC created in ECC SM59.
    Below is my question.
    1, Latest PI version required H og  G type connection ?
    2, SLD (sldapicust,lcrsaprfc,sldapicust,rz70)related information needs to point to PI new upgraded dsystem for ABAP proxy testing in new sand box?
    pls advise.

  • Interface ABAP Proxy - File - Synchronous - (Is it possible???)

    Hi Experts,
    I want execute ABAP Proxy which will create File in FTP. On final, i need return "OK" information to the ABAP Proxy.
    Is it possible? ABAP Proxy <-> File Synchronous? Without BPM and Custom Module Adapter. Just using RequestResponseBean???
    Tks in advance.

    Hi Raj,
    Tks. I implemented the Acknowledgements Request and changed the ABAP Proxy to Async. But the Ack returns to the ECC with the error and is not saved in the Message. The error follows below:
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    <!--  Update Acknowledgment Status of Request Message
      -->
    <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="PERSIST">REQUEST_MESSAGE_NOT_FOUND</SAP:Code>
      <SAP:P1>4EE24DEB4EA60650E10080000A09071E</SAP:P1>
      <SAP:P2>CENTRAL</SAP:P2>
      <SAP:P3></SAP:P3>
      <SAP:P4></SAP:P4>
      <SAP:AdditionalText></SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace=""></SAP:ApplicationFaultMessage>
      <SAP:Stack>Requisição mensagem 4EE24DEB4EA60650E10080000A09071E pipeline CENTRAL versão desconhecida</SAP:Stack>
      <SAP:Retry>N</SAP:Retry>
      </SAP:Error>
    Any Idea about this error?
    Tks in advance.

  • Forwarding Application Error in ABAP Proxy to CCMS

    Hi,
    We are using fault messages for inbound ABAP proxy interfaces to capture application errors, and we can see the error in the monitoring of ECC. However, Is there a way, we can forward it to CCMS of ECC (and not XI), because we want to use an external tool linked to CCMS via SOLMAN to get alerted in case of application errors.
    Best regards,
    Rahul Kumar

    Is there a way of getting the above thing done? I have a very similar Issue.
    Rahul if you have found out a way of doing the same please let me know by email. [email protected]
    Thanks,
    Karthik

  • ABAP Proxy Exception

    Hello everybody i have this error in my sxmb_moni of xi for a abap proxy server receiver:
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Inbound Message
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIProxy</SAP:Category>
      <SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
      <SAP:P1>UNCAUGHT_EXCEPTION</SAP:P1>
      <SAP:P2>ZFUS_CL_MI_FMGOB_CAT_FONDOS_C1</SAP:P2>
      <SAP:P3>EXECUTE_SYNCHRONOUS</SAP:P3>
      <SAP:P4 />
      <SAP:AdditionalText>Unable to execute the dynamic application call (kernel error ID UNCAUGHT_EXCEPTION, class ZFUS_CL_MI_FMGOB_CAT_FONDOS_C1, method EXECUTE_SYNCHRONOUS)</SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack />
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    any suggestions?
    Regards,
    Julio Cesar

    Hi
    Below is the full details of above links
    For link 4196517?
    Q) Hi All,
    I have got a requirement to raise an exception from existing ABAP Proxy depending on condition. XI consultant created a fault messge type and attached to the inbound interface message type. I have regenerated the ABAP proxy but I cant find any thing in excpetion tab to raise exception.
    Please let me know the solution for this.
    Answers : 1) Go to Sproxy .
    Select the message interface for which you generated the proxy.
    Click on the Structure tab. Do you see any Exception Class generated for fault message ?
    2) Just follow all the steps defined in the below Blog and you will find the solution.
    /people/shabarish.vijayakumar/blog/2006/11/02/fault-message-types--a-demo-part-1
    3) I can't find any exception class there in 'Structure' tab. what might be the problem.
    4) In SProxy ..under the Message Interface you will see Fault Message Type.
    Click on Fault Message Type and check if you can see the fault message type created by xi consultant.
    Also ask your xi team to login to IR and re-activate the interface.
    5) I can't find any fault message type under Fault Message Type. I will ask my XI consultant to reactivate the interface.
    Is this the only problem for this or is htere any other reason for not finding this fault message type in SPROXY.
    6) Ideally the fault message type should be visible unless he has defined Software Dependencies and using MT from some other SC.
    Even if the fault message type is not visible everything could be all right.
    Ask him to check if he selected the fault message type while activating the interface.
    Do update us when you get a reply from ur xi team.
    7) I have checked with XI admin, he said that he created fault message types in Development Xi but R/3 Development refers to Production XI system in exchange profiles. He asked me to change it to XI development in exhange profile settings. So I am searching info on how to set exchange profiles.
    8) The following link will guide you ..
    http://help.sap.com/saphelp_nw04s/helpdata/en/c9/7a1041ebf0f06fe10000000a1550b0/frameset.htm
    I dont think we need to do any changes in Exchange Profile for proxy communication.
    Changing the RFC Destinations (in your R/3 system)- LCRSAPRFC & SAPSLDAPI should solve your problem.
    II) For Link :4147406?
    Q) Hi All,
    We have an ABAP Proxy implemented for posting goods movement and it is calling BAPI function module to post good movement. We have got a requirement that if BAPI returns any error, this error message send back to SAP XI.
    data call proxy
    Legacy -
    > XI -
    > SAP R/3(call bapi)
    <----
    error message
    Please let me know how to send the message back to XI.
    Answers: 1) Refer the following
    /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File
    /people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - File to ABAP Proxy
    2) you can utilize the fault messages for such an usage -
    Ref:
    Fault messages -
    /people/shabarish.vijayakumar/blog/2006/11/02/fault-message-types--a-demo-part-1
    Handling Web Service SOAP Fault Responses in SAP NetWeaver XI -
    /people/jin.shin/blog/2007/05/21/handling-web-service-soap-fault-responses-in-sap-netweaver-xi
    3) You have to do Fault message implementation in this case...
    A no. of exception will be there.For any error proxy will catch the exception and will write it in the fault message...so....from r/3 response will go to Xi as Fault message response in case any error/exception occours......
    have look here...
    Fault message implementation.
    /people/shabarish.vijayakumar/blog/2006/11/02/fault-message-types--a-demo-part-1
    4) Please go through it is very useful.
    /people/krishna.moorthyp/blog/2005/12/23/monitoring-for-processed-xml-messages-in-abap-proxy --Monitoring for Processed XML messages in ABAP Proxy
    /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy --ABAP Proxies in XI(Client Proxy)
    /people/sap.user72/blog/2005/12/29/service-enable-your-sap-application-component --- Service Enable Your SAP Application Component
    5) the file adapter can work only asynchronous, so you cant have a response. You should build two asynchronous messages. File -> proxy inbound and after the bapi call an outbound proxy is called which is sending a second messge to the file adapter.
    6) you can define a synchronous scenario which will include request/response messages.
    send the response back to XI.
    the file adapter supports BE QoS.
    http://help.sap.com/saphelp_nw04s/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
    7)I have an interface Z_stock_move(message interface(inbound)) and class z_STOCK_MOVE in that. I have clicked exception tab but not able to add exception there as its not enabled for change.
    Please let me know how to add the exception to an existing abap proxy.so that i can raise an exception when bapi call to goods movenment returns errors.
    Might be useful to U.

  • Forwarding ABAP Proxy Application errors to CCMS of ECC

    Hi All,
    We are using fault messages for inbound ABAP proxy interfaces to capture application errors, and we can see the error in the monitoring of ECC. However, Is there a way, we can forward it to CCMS of ECC (and not XI), because we want to use an external tool linked to CCMS via SOLMAN to get alerted in case of application errors.
    thanks,
    Karthik

    Solved on my own.
    If you need information please contact [email protected]

  • ABAP Proxy doesnu2019t Work

    Hi all,
    We have problem about ABAP Proxy (Inbound). We are using a follow scenario:
    Legacy ( JDBC )    ->   XI  ->  ABAP Proxy ( ECC Backend )
    Recently The ECC Backend was updated  ( only data ) , and since than the ABAP Proxys  doesnu2019t work.  We tested other Adapter, we used Receiver RFC Adapter, and RFC Adapter worked.
    We tried a lot of thinks, we regenerated ABAP Proxys, We activated Proxys, taken Refresh Full CPA Cache, we checked SCIF, SMICM, and we couldnu2019t solved the issueu2026..
    Could you help us????
    Thanks!!!
    Fábio Ferri
    SAP Consultant XI/ABAP/Netweaver

    Hello,
    i think for this scenario..you have used XI adapter.
    Check HTTP service number.
    It should be same as in:
    In SAP R3, Transaction - > SMICM : goto->services -> ..you will find HTTP service number..Use the same in XI adapter.
    or
    Execute transaction : SPROXY
    goto-> connection test.
    Regards,
    Sreenivas.

  • Help on ABAP Proxy

    Hi All,
    We have an ABAP Proxy implemented for posting goods movement and it is calling BAPI function module to post good movement. We have got a requirement that if BAPI returns any error, this error message send back to SAP XI.
    data call proxy
    Legacy -
    > XI -
    > SAP R/3(call bapi)
    <----
    error message
    Please let me know how to send the message back to XI.
    Thanks in advance
    Points will be rewarded.
    -Venkat

    Hi venkat,
      You have to do  Fault message implementation in this case...
    A no. of exception will be there.For any error proxy will catch the exception and will write it in the fault message...so....from r/3 response will go to Xi as Fault message response in case any error/exception occours......
    have look here...
    Fault message implementation.
    /people/shabarish.vijayakumar/blog/2006/11/02/fault-message-types--a-demo-part-1
    Regards
    Biplab
    Use a Good Subject Line, One Question Per Posting - Award Points

  • ABAP proxy to file-Create package in SPROXY

    hey guys
    i m doin ABAP proxy to file scenario,and when i try to create a ABAP proxy its asking for the package and prefix,do any of u know how to create a package ?
    also if there are any inbuilt packages that i can use
    thanx
    ahmad

    Ahamd,
    use custom packages and you can give prefix start with zxx_
    thanks
    Prasad

  • Doubts in ABAP Proxy

    Hi All,
    1. I need to send material master data from sap r/3 to XI through abap proxy. How can i do this? can i write code in abap to extract material master data by using select statement? Please let me know.
    2. I am receiving invoice data from XI  I need to post this data into sap r/3 by abap server proxy. This data shouldn't be post immediately. it should be in parked status after doing some cross check i need to post.   How can i do this?
    Regards,
    venkatesh

    Hi,
    >>>2. I am receiving invoice data from XI I need to post this data into sap r/3 by abap server proxy. This data shouldn't be post immediately. it should be in parked status after doing some cross check i need to post. How can i do this?
    inside your abap proxy (server) just call BAPI BAPI_INCOMINGINVOICE_PARK
    and you can park invoices with this one
    there is no special handling necessary in ABAP proxy for this requirement
    parking of invoices is a standard FM in SAP
    >>>1. I need to send material master data from sap r/3 to XI through abap proxy. How can i do this? can i write code in abap to extract material master data by using select statement? Please let me know.
    there is no standard proxy for materials so just use IDoc instead
    Regards,
    Michal Krawczyk

Maybe you are looking for