Abap proxy for 2 PI server with 1 ERP server

Hi expert,
I have 2 production PI server that require abap proxy and RFC adapter communication with 1 production ERP server. In the ERP server sxmb_adm integration server configuration only 1 rfc destination that possible but i have 2 PI server. Is that anyway to set 2 rfc destination?
Thanks..

Hi
If you want to connect by proxies, then it will not be possible to connect 1 ECC to 2 PI systems.
Pls check replies from Mark Smyth & Amir from the following thread.
XI and PI
Regards
Abhijit

Similar Messages

For R/3 to CRM Scenario ,creating ABAP Proxy for CRM which is in Target

In R/3 to CRM scenario it is ok creating ABAP Proxy for CRM which is Target system.if it is possible it is Client Proxy.it is correct or not

Hi,
Client Proxy. When you need to create Proxy for your Sender system then the proxy is generated on the client side and the Class created in Proxy generation is called in a report/FM etc.
Server proxy. The server proxy is created when you are sending the data from SAP XI to the receiving system.
The generation of proxy in both the cases happens on the sender or the receiver system.
Regards
Vijaya

ABAP Proxy for 10 million records

Hi,
I am running a extract program for my inventory which has about 10 million records.
I am sending through ABAP proxy and job is cacelled due to memory problem.
I am breaking up the records while sending through ABAP proxy..
I am sending about 2000 times proxy by breaking the number of records..
do you think ABAP proxy would able to handle 10 million records..?
Any advice would be highly appreciated.
Thanks and Best Regards,
M-

Hi,
I am facing the same problem. My temporary solution is to break up the selected data into 30.000 records and send those portions by ABAP proxy to PI.
I think the problem lies in the ABAP to xml conversion (call transformation) within the proxy.
Although breaking up the data seems to work for me now, it gives me an other issue: I have to combine the data back again in PI.
So now I am thinking of saving all the records as a dataset file on the application server and using the file adapter instead.
Regards,
Arjan Aalbers

SAP Standard ABAP Proxy for PO 855 SRM-R/3

Hi :
855 PO Confirmation in R/3 from SRM
Can I use the ABAP Proxy "PurchaseOrderConfirmation_In" to Confirm the PO response in SRM from R/3
( In R/3 i get a idoc formatted file as 855 from vendor and can do PO Confirmation uisng custom program in R/3).
PurchaseOrderConfirmation_In is standard abap proxy out of the sap box for the SRM-SUS integration.Sender Interface is PurchaseOrderConfirmation_Out(SUS) and receiver Interface is PurchaseOrderConfirmation_In(SRM) for the PO Confirmation for SUS-SRM scenario.
The 855 file from vendor is in the form of IDOC structure and how to customize the file to be used in conjunction with PurchaseOrderConfirmation_In(as this is based on XML).
How to Convert the 855 IDoc to XML format and feed it to standard SAP Interface PurchaseOrderConfirmation_In via XI ,if yes will this work and how??
Thanks in advance..

Hi Srivatsan,
How are you? Hope you remember me..We got a similar kind of requirement in our project. Do you have solution for this issue?
regards
Paris

WSDL error during generation of ABAP proxy for web service

Hi friends,
I am getting error during the generation of ABAP proxy object for web service developed in .NET .
Error : Proxy generation terminated: WSDL error (<extension> not supported).
How to make this WSDL file compatible for ABAP proxy.
I have tried to edit WSDL file in XML Spy but did not get any option to replace/remove the tag <extention>.
If any one worked on this. Please help me its urgent.
Thanks and regards,
Shivanand.

HI ,
I am having the same issue!!!
Does ABAP Proxy Generation support <extension> ?
Is there a list available of what is supported and what not (please consider I do not have access to sap notes)?
Thanks

How to create ABAP Proxy for SSL secured ABAP Service

Hi guys,
I try to set up transport security for my ABAP web service. The service should be called via a ABAP Proxy.
These are my steps to create the ABAP web service:
1. Create function module (se80)
2. Create web service (web service definition) (service wizard)
2.1 Authentication = STRONG
2.2 Transport Guarantee = BOTH
3. Activate service (wsconfig)
4. Control service (wsadmin)
Afterwards I tried to create the proxy but when I add the WSDL URI I always get an
HTTP error (return code 407, message "ICM_HTTP_SSL_ERROR")
I tried to find a "How to" but I was not successfull. Also the saphelp http://help.sap.com/saphelp_nw04/helpdata/en/65/6a563cef658a06e10000000a11405a/frameset.htm was not helpful for me.
Hopfully you can help me! Every comment is appreciated!
Regards

I advise to have a look into the ICM trace file (dev_icm) - either by using ABAP transaction ST11 or SMICM.
There you should find error details. Most likely it's about the "chain verifier" complaining that he's unable to verify the certificate of the communication peer.
In that case [SAP Note 1094342|https://service.sap.com/sap/support/notes/1094342] might be helpful.

Message Send from ABAP Proxy implemented in XI Server ABAP Stack

Hello everyone,
I have a question and I'm not sure of this is an ABAP question but I'll try here and try to find some information on ABAP forums and weblogs, I need to send a XML message to the XI pipeline from an ABAP Server Proxy implemented in the same XI ABAP Stack Server, why I need this? well actually I can't find a way to do it in a BPM so I'm going to try to set the logic for this message send in the ABAP Stack, so do you know like a Function Module so I can send a message to the pipeline but I need the message to be set as Scheduled, I'll try ABAP Forums and Weblogs too, thanks in advance.
regards,
julio

Hi
You can schedule your program as a background Job SM36. Please check the transaction. You will have to set your ABAP program as the job STEP (if you probably have selection screen for your report then you will also need a variant for your report).
Do schedule your program as a 'Periodic Job' and your personal period (daily/hourly).
After you save your settings you can also monitor your job (ABAP Program) from the same transaction or even from CCMS if you like.
Thanks
Gaurav

How to create a job thru ABAP program for calling a program with variant???

Hello experts,
can u give me step wise procedure to create jobs for a program with a variant name thru ABAP???
Also, can a transaction can be scheduled as a job to run in background with a variant name???
Edited by: SAP USER on Jul 22, 2008 6:08 AM

Hi,
To create a job through ABAP program you can do the following.
Go to Menu bar.
In there, go to SYTSTEM> SERVICES> JOBS--> DEFINE JOB.
Then give the JOB NAME and CLASS in the screen that comes up.
This is how we schedule a program.
Now, to create a variant for a program -
First activate your program in SE38. Then execute it .
Now, click on SAVE button. It will open up the variant creation screen. Give the details there like variant name and value for the fields. Save and come back.
Hope this helps.
Regards,
Hari Kiran

ABAP DT for OS X: problems with GUI integration

Anyone there able to make it work on OS X? Your help will be much appreciated.
I've tried HANA Studio bundled from SAP, vanilla Juno and Kepler installations with tools.hana.ondemand.com repos and cannot make the SAP GUI integration to work in any of them.
Every time I select option "Open with SAP GUI" I receive the empty tab and error message in log:
Unable to create class 'org.eclipse.ui.internal.e4.compatibility.CompatibilityEditor' from bundle '1154'
Unhandled event loop exception
and so on.
I have to GUIs installed 7.20rev11 and 7.30.

Now, it works for me.
Previously I have had updated the Java SE 7 only (Default with java.com site) But the JDK version is needed. I have now installed JDK 1.7-51 and SAPGUI 7.30rev7 and it works fine.

[MESSAGE.GENERAL] How can take the actual error text for ABAP proxy error?

Hi...
I'm a ABAPer.
I got to create outbound abap proxy for synchronous server proxy and described below.
My problem is program can not catch the actual error message when occurred error during send data to XI.
The return message is just 'MESSAGE.GENERAL'.
But according to the XI part, 'Key error' is actual reason.
So... how can i take the actual error text like 'Key error'?
* Only MESSAGE.GENERAL is return message for all kind of errors.
Thanks.
Below----
TRY.
 CREATE OBJECT abap_proxy.
 CALL METHOD abap_proxy->execute_synchronous
 EXPORTING
 output = gs_out
 IMPORTING
 input = gs_in.
Exception Handling
 CATCH cx_ai_system_fault INTO go_sys_exception.
 g_sys_result = go_sys_exception->get_text( ).
 CATCH cx_ai_application_fault INTO go_app_exception.
 g_app_result = go_app_exception->get_text( ).
ENDTRY.
COMMIT WORK.
Return status 'D' is succeeded.
if gs_in-sales_group_rer_sap-xstat <> 'D'.
 WRITE:/ 'System Error Message :', g_sys_result.
 WRITE:/ 'Application Error Message :', g_app_result.
endif.
*--Result--
System Error Message : MESSAGE.GENERAL
Application Error Message :
Message was edited by: Miju cho
Message was edited by: Miju cho

Thanks guys, this was useful.
My scenario is for Asynchronous communication.
I guess Fault messages are used in case of Synchronous communication for handling application errors. So if there was something wrong at the JDBC end then I could use the fault messages.
Have i got this right?
I also came across this piece on Acknowledgements. But is says that they can be used with the following Receivers:
The following receivers support acknowledgments:
ABAP and Java proxies (XI 3.0 SP1 for the latter)
Integration processes
IDocs (note that IDocs only return acknowledgments when they have been configured using the ALE audit)
Receiver adapters support system acknowledgments but not application acknowledgments
My Receiver is JDBC. So I guess I cannot use acknowledgements either.
Hence, I need to know what I can do to replicate the system errors eg. failed server etc...so that I can get catch these errors during sending.
I'll tell you abt what happened earlier.
My XI server was down. I executed the code for the sender ABAP Proxy and it did not catch the error. In SXMB_MONI in the R/3 system, I could see the messages queued up. When the XI server started, the messages were transferred to XI.
I need to handle such errors...ie. If the server is down or message did not reach XI then my ABAP program that sends data via ABAP proxy needs to know that something went wrong.
Thanks and Regards,
Ashwin

Consume web service in ABAP proxy with SOAP header

Hi Thomas ,
I am trying to consume web service in ABAP . I have followed the procedure from one of your web blog <a href="/people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap a Developer's Journal Part XIV - Consuming WebServices with ABAP</a> . (640 release).
I need to pass SOAP header along with SOAP body. As you mentioned I have used if_wsprotocol_ws_header interface to pass header but it is still failing.
Please see below code and please give some direction to fix the issue.
1.Create ABAP proxy for WSDL (http://ws.strikeiron.com/SwanandMokashi/StockQuotes?WSDL). It has created structures only for SOAP body.
2.Create Logical port
3.Create following program to call proxy
REPORT zproxy.
DATA: ref_stock TYPE REF TO zzco_stock_quotes_soap ,
 ws_header TYPE REF TO if_wsprotocol_ws_header,
 name TYPE string,
 namespace TYPE string.
TRY.
 CREATE OBJECT ref_stock
get WS_HEADER protocol
 ws_header ?= ref_stock->get_protocol('IF_WSPROTOCOL_WS_HEADER').
set somehow header as iXML-DOM tree
 DATA: ixml TYPE REF TO if_ixml,
 xml_document TYPE REF TO if_ixml_document,
 xml_root TYPE REF TO if_ixml_element,
 xml_element TYPE REF TO if_ixml_element,
 xml_node TYPE REF TO if_ixml_node.
 DATA l_xstring TYPE xstring.
 DATA l_string TYPE string.
 FIELD-SYMBOLS <fs_xstring> TYPE xstring.
Additional Header:
 CONCATENATE
'<soap:Header>'
'<s1:LicenseInfo xmlns:s1="http://ws.strikeiron.com">'
'<s1:RegisteredUser>'
'<s1:UserID>[email protected]</s1:UserID>'
'<s1:Password>aaaaaaaa</s1:Password>'
'</s1:RegisteredUser></s1:LicenseInfo>'
'</soap:Header>' INTO l_string.
convert to xstring
 l_xstring = cl_proxy_service=>cstring2xstring( l_string ).
 IF NOT l_string IS INITIAL.
 create iXML DOM document from XML xstring
 CALL FUNCTION 'SDIXML_XML_TO_DOM'
 EXPORTING
 xml = l_xstring
 IMPORTING
 document = xml_document
 EXCEPTIONS
 invalid_input = 1
 OTHERS = 2.
 IF sy-subrc = 0 AND NOT xml_document IS INITIAL.
 xml_root = xml_document->get_root_element( ).
 xml_element ?= xml_root->get_first_child( ).
 add header element by element to SOAP header
 WHILE NOT xml_element IS INITIAL.
 name = xml_element->get_name( ).
 namespace = 'http://swanandmokashi.com' . "xml_element->get_namespace_uri( ).
 IF NOT xml_element IS INITIAL.
 ENDIF.
 ws_header->set_request_header(
 name = name
 namespace = namespace
 dom = xml_element ).
 xml_element ?= xml_element->get_next( ).
 ENDWHILE.
 ENDIF.
 ENDIF.
CATCH cx_ai_system_fault .
ENDTRY.
*Call soap body using abap proxy class.
DATA: get_quotes TYPE zzget_quotes_soap_out .
DATA: get_quotes1 TYPE zzget_quotes_soap_in .
get_quotes1-quote_ticker = 'GE'.
TRY.
 CALL METHOD ref_stock->get_stock_quotes
 EXPORTING
 get_quotes1 = get_quotes1
 IMPORTING
 get_quotes = get_quotes.
CATCH cx_ai_system_fault .
CATCH cx_ai_application_fault .
ENDTRY.
4.It is throwing cx_ai_system_fault error.
SOAP details:
Input:
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:enc="http://schemas.xmlsoap.org/soap/encoding" >
<soap:Header>
<s1:LicenseInfo xmlns:s1="http://ws.strikeiron.com">
<s1:RegisteredUser>
<s1:UserID>[email protected]</s1:UserID>
<s1:Password>aaaaaaaa</s1:Password>
</s1:RegisteredUser>
</s1:LicenseInfo>
</soap:Header>
<soap:Body>
<tns:GetQuotes xmlns:tns="http://swanandmokashi.com">
<tns:QuoteTicker>GE</tns:QuoteTicker>
</tns:GetQuotes>
</soap:Body>
</soap:Envelope>
Thanks,
Kavitha.

Hi ,
Thank you for the response. Did you passed user email and password ([email protected] /aaaaaaaa) part of licenseinfo->resisteredUser along with Quoteticker GE in analyzer?
<a href="http://www.strikeiron.com/Analyzer/OnlineAnalyzer.aspx?WSDL=http://ws.strikeiron.com/SwanandMokashi/StockQuotes?WSDL">ANALYZER</a>
Thanks,
Kavitha.

Message not going to the receiver ABAP Proxy

I have a File-XI-ERP scenario. The file communication channel is working fine but the sending to the ABAP proxy for transfer to ERP is not working. I have created the right ID objects for the scenario. Using the communication channel monitoring, the file gets to be read, transformed into the right message but sent to the wrong integration server (http://xidev:50000/sap/XI/engine?type=entry) instead of what is given in the communication channel. Any suggestions on what to look at?

Hai,
Check whether the ABAP Proxies are enabled in your ERP System or not. To do this Login to your ERP System --> Goto tcode: SPROXY
select option --> Goto --> Connection Test. this will check the connection b/n your ABAP proxy and the Integration Builder. the following parameters should be checked,
1.The address of the Integration Builder must be stored in the SAP system
=>Check/maintain with report SPROX_CHECK_IFR_ADDRESS
2.The HTTP connection of the ERP application server must function correctly
=>Check with report SPROX_CHECK_HTTP_COMMUNICATION
3.The Integration Builder server must be running correctly
=>Check with report SPROX_CHECK_IFR_RESPONSE
4. Proxy generation must interpret the data of the Integration Builder correctly
==>Check with report SPROX_CHECK_IFR_CONNECTION
Hope this helps..
regards,
Gopinathan.

Doubts in ABAP Proxy

Hi All,
1. I need to send material master data from sap r/3 to XI through abap proxy. How can i do this? can i write code in abap to extract material master data by using select statement? Please let me know.
2. I am receiving invoice data from XI I need to post this data into sap r/3 by abap server proxy. This data shouldn't be post immediately. it should be in parked status after doing some cross check i need to post. How can i do this?
Regards,
venkatesh

Hi,
>>>2. I am receiving invoice data from XI I need to post this data into sap r/3 by abap server proxy. This data shouldn't be post immediately. it should be in parked status after doing some cross check i need to post. How can i do this?
inside your abap proxy (server) just call BAPI BAPI_INCOMINGINVOICE_PARK
and you can park invoices with this one
there is no special handling necessary in ABAP proxy for this requirement
parking of invoices is a standard FM in SAP
>>>1. I need to send material master data from sap r/3 to XI through abap proxy. How can i do this? can i write code in abap to extract material master data by using select statement? Please let me know.
there is no standard proxy for materials so just use IDoc instead
Regards,
Michal Krawczyk

Receiver as ABAP Proxy

Hi
I am trying to implement the following scenario:
- A SQL database is pooled and updated records and with the help of XI i have to call a BAPI in the R/3 system to create a sales order using ABAP Proxy.so before i create the Sales order i have to do a lot of validations like whether the customer code is existing,whether the material is a an existing material or not and many more.so can someone tell me how will i do all these validations before creating the sales order.
Thanks and Regards,
Jishi

Hi,
Since the ABAP proxy code is written in the XI server is not correct perception.
Let me clarify a few things...
ABAP Proxy code is not written in XI Server. U generate an ABAP Proxy for the ,message Interfaces developed in XI, in your target SAP system.
When u generate the Proxy for the Message Interface in SAP system, it helps you in marshalling and unmarshalling of XML data.
In the Execute synchronous/ execute asynchronous method of the generated proxy, u actually write the code/ busineess logic for ur validations.
If all validations are successful then u call the sales order BAPI.
Cheers,
siva Maranani.

Response message error in queue when using ABAP proxy

I am using an abap proxy for the first time, and some of the response messages are getting stuck in the sender's (R/3) inbound queue. To resolve them, I have to either reset the status or execute the LUW. Sometimes, this doesn't even work.
Here is my "asynchronous" scenario:
R/3 -> <proxy> -> PI -> <file adapter> -> File
The R/3 system that I'm using has not used PI before, so I'm thinking something is missing from the set-up on the R/3 side. On the errors I finally do get to process, I get the following error in the SXMB_MONI on the sender (R/3) side (the PI SXMB_MONI shows successful). Can someone help me understand what a response message is and how it is different from an acknowledgement? Also, help me to understand what could be causing the response messages to get stuck in the R/3 queue.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
 - <SAP:ErrorHeader xmlns:SAP="http://sap.com/exchange/MessageFormat">
 <SAP:Context />
 <SAP:Code p1="MessageId"
 p2="4962B2EDB60A003BE1008000A2844D1A"
 p3="00000000000000000000000000000000"
 p4="">PROTOCOL.WRONG_HEADER_IN_RESPONSE</SAP:Code>
 <SAP:Text language="EN">Response message header contains the value 00000000000000000000000000000000 in element MessageId instead of the expected value 4962B2EDB60A003BE1008000A2844D1A</SAP:Text>
</SAP:ErrorHeader>

Ultimate testing tool for services is soapUI (Freeware)
http://www.soapui.org/
If you can invoke your service from soapUI and you receive a response, then PeopleSoft is working fine and the request handling in the calling system is incorrect.
Try downloading soapUI and try invoking your service (not that a fan of SendMaster).
Hakan

Abap proxy for 2 PI server with 1 ERP server

Similar Messages

Maybe you are looking for