ABAP Proxy on XI System itself?

Hi all!
I was wondering whether it is possible to use an ABAP Inbound Proxy that is located on the XI system itself (e.g. for getting some additional data out of the SAP database as you would do via RFC function modules)?
How does the XI react if it gets an SOAP Message for calling an inbound proxy when its own Integration Engine is customized as a "central" one? Doesn't it try to route this message trough its integration engine instead of passing it to the proxy object then?
Has anyone tried this out yet ...?
Thanks for your input, Andy

Hi,
As suggested, u need to create a client copy. (check the Configuration guide to know the step-by-step procedure for setting up the client copy). This client system will be registered as a Applicaiton system in the SLD. So when you configure ur scenario, in receiver determination, u will refer to the client system. say SYSTEM_20) and the messag will be routed to SYSTEM_20 and the ABAP server proxy will get executed).
U can refer to the weblog to "Communication between SAP System & Webservice Using Proxies"
/people/siva.maranani/blog/2005/05/23/communication-between-sap-system-webservice-using-proxies
U can also refer to /people/siva.maranani/blog/2005/04/03/abap-server-proxies for creating server proxies.
Hope this helps you.
Cheers,
Siva Maranani.

Similar Messages

How to active ABAP Proxy in SAP system.

Hi All,
I want to work with ABAP proxies.How to active ABAP proxy in SAP system.What the configuration is needed.Is there any configuration is need in XI system to work with ABAP proxies.Please help me..
Thanks,
Kishan.

Hi Kishan,
You have to check whether ur r/3 system's(WAS 620 or above) excahnge profile has entries for integration builder.
Pls check the Example configuration for accessing
interfaces in the Integration Repository (exchange profile):
http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/content.htm
If the Parameters are not there u need to add in the respective section's as provided in the link.
exchange profile URL is:
http://r3servername:5<instance>00/exchangeProfile
I hope this provides you a solution.
Regards.
Praveen

XI 3.0 SP14 Synchronous SOAP- XI- ABAP Proxy - fails with "System Error"

Hi All,
The synchronous response message fails at the stage "Receiver Identification".
It seems that the synchronous response XML has no "sender" attribute, so obviously the receiver determination fails.
In the message monitor I can see the correct payload coming from the ABAP proxy, so that part looks OK.
I have the same scenario working perfectly on another system landscape, so there might be a configuration side to it.
Thanks is advance,
Ofer
Message was edited by: Ofer Even-Tsur

Hi,
for the error information SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_BE</SAP:Code>
looks like xi is not able to find a reciever of best case. Open up the scenario in COnfiguration, open up the modify(add spaces) and activate reciever determination / reciever communication channel.
cheers,
naveen

How to count through put of ABAP Proxy in ERP system

Hi PI expert.
At the moment, I am looking for the way to find out
the number of processed ABAP proxy and also the combination
of sender/receiver in ERP system.
Since the number of processed message is a lot,
I cannot used SXI_MONITOR to count the number and to check
the combination.
if there any good way, or report that can be used ?
Best Regards
Keiji Mishima

Hi VJ
thanks for the information.
Let me try whether it works.
Best Regards
Keiji

ABAP Proxy in PI System

HI all,
i have a scenario :
my source system is PI (App.sys)(client 01) from where i am sending the data to my PI (IS)(client 02 ) using ABAP Proxy. And from there i have send the data to my 3rd party Business system using JUDD adapter.
i am able to send the data from my 01 client(AS) to 02 client(IS), but i am not able to send it to my 3rd party system, i can see sucess message in 01 client(AS).
i am getting error RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC
i have checked SLDCHECK it is good.
my Configuration in ID is also good.i have Checked in Test Configuration of my ID.it is showing success.
is there any other Configuration required
pl help me out in finding the Solution..
thanks.
kalyan

Hi
Test configuration not works always.
Check with your ID configurations for receiver determination and check whether system or service defined has the expected ASYNC interface.
If you are using service then you have added the target interface or not?
Thanks
Gaurav

Activating ABAP Proxy between business system and XI

I have a question on the release of XI Add-on we need to install on the Business system side for activating ABAP Proxy. We are using XI 3.0 system and want to activate the ABAP Proxy between XI 3.0 system and the R3E system running on WAS 620 SP 45.
I read an excellent SDN Blog from Vijaya Kumari on how to activate the ABAP Proxy. It lists XI Add-on installation on the business system. The XI Add-on (SAPK-20006INAPPINT SP06) is what the XI 3.0 configuration guide refers to in OSS note 439915. Is there a newer XI Add-on to go with XI 3.0 system?
Thanks,
Asif

Hi Asif -
SAPK-20006INAPPINT(SP06) is the latest XI add-on (APPINT 200_620) available. Since your WAS 620 is on (SP45) and the prerequisite for SAPK-20006INAPPINT(SP06) is SAPKB62043, your system looks ready. But of course, refer to the mentioned Note - 439915.
>>><i>Is there a newer XI Add-on to go with XI 3.0 system?</i>
I'm not sure if this is the right question. Any Web AS 6.20 system will require the XI-add on to communicate to XI (2.0 or 3.0) - specifically regarding proxies. WebAS 6.40 systems do not require the add-on.
Let me know if you need any clarification.
Thanks.
Jin

NonSAP client- SOAP- PI- ABAP Proxy- SAP Business System EOIO Question

Hey all... wondering how and if the following can be accomplished
I have a nonSAP client that is sending SOAP message pairs to PI 7.11 SP06. PI is then sending these messages via ABAP Proxy to our SAP business system. By pairs I mean for each event in the client it's going to send 2 messages to PI and then to SAP business system. These messages have to be processed by PI and SAP in the exact order the client sends them.
My goal is to have the client somehow specify the queueID and quality of services as EOIO when it calls PI via the SOAP message. The reason is when the client sends 1 set of messages we don't want it to block subsequent message pairs if something goes wrong with the first. We're going to have an "ID" as part of the queueID that will be unique by pair.
My question: is it possible to specify this queueID (and the qos=EOIO) in the SOAP message that is sent to PI so this queueID carries through PI and into the SAP business system?

hi,
you can do that :
a) in standard with http adapter :
http://help.sap.com/saphelp_nw04/helpdata/en/43/64db4daf9f30b4e10000000a11466f/content.htm
with &queueid=<queueid>
b) not in standard with SOAP adapter
Regards,
Michal Krawczyk

Creating ABAP proxy on a 6.2 system

I've been trying to get my head round how ABAP proxies work, and I've got as far as realising I need to create an ABAP proxy on a system running WAS 6.2.
The problem is that it doesn't seem to work - although SPROXY appears to be ok, there is apparently no way it can connnect to the Integration repository. Digging around in the code seems to reveal that it's somewhat out of date - it constructs the wrong url to get at the IFR for a start.
Is there something that's supposed to be installed so that SPROXY can communicate with the IFR on our XI system?

Hi,
have u applied,
1) APPINT 200_620 patch
2) WebAs 6.20 kernel patch level 1253
Also u should configure ur SAP System to communicate with XI server.Check the followign program to test if your SAP system is configured preperly to connect to XI Server...?
1.Check/maintain with report: SPROX_CHECK_IFR_ADDRESS
2.Check with report SPROX_CHECK_HTTP_COMMUNICATION
3.Check with report SPROX_CHECK_IFR_RESPONSE
4.Check with report SPROX_CHECK_IFR_CONNECTION
By the way u can refer to the weblog.. creating ABAP Client Proxies in WebAs6.40 system.
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
Cheers,
Siva Maranani.

Error while create abap proxy

Hi,
I need to create abap proxy in sap system to push the data from sap system to XI.
when i create ABAP PROXY in sap system in Tcode SPROXY,System displays a error
"objects from other name spaces missing" .
So i am not able to activate the abap proxy.
kindly let me know how to solve this error.
Regards,
Ganesh

Are you using the message type created in external system?
Are any of your Data type element refer structure to other namespace.
Error mention that it does not find the detail structure of any of Datatype element. Check all link are available properly.
Gaurav Jain
Points if answer is helpful

ABAP Proxy Doesnt work in PI 7.0

Hi All,
We have strange problem with ABAP Proxy under PI system
We are getting proxy communication error in PI 7.0 (NOT FROM Business system).
After reading a lot of threads & notes, I performed all the necessary checks, but still no luck.
--> When I click on integration builder from SPROXY T-code it popups correct XI Screen
--> Following parameters are maintained properly
com.sap.aii.connect.repository.name: Server (for example, pwdf0436)
com.sap.aii.connect.repository.httpport: Port (for example, 1080)
com.sap.aii.connect.repository.contextroot: Root (for example, rep)
com.sap.aii.applicationsystem.serviceuser.name: User
com.sap.aii.applicationsystem.serviceuser.pwd: Password
--> All the RFC like AI_RUNTIME_<SID>, LCRSAPRFC & SAPSLDAPI & SLD_UC etc working fine
Following reports are NOT working
SPROX_CHECK_IFR_ADDRESS
SPROX_CHECK_IFR_RESPONSE
SPROX_CHECK_IFR_CONNECTION
Following report execute SUCCESSFULLY
SPROX_CHECK_HTTP_COMMUNICATION
Thanks in advance

Hi Rakesh,
Has the ABAP system been configured as specified in the XI configuration guide (Section on how to configure a business system)?
This would include Integration Engine Configuration in transaction SXMB_ADM, configuration in transaction SLDAPICUST and RFC destinations in SM59.

Dynamic Configuration from Client ABAP Proxy

Hello Experts,
Is it possible somehow to set Dynamic Configuration values to Message Header when calling Client ABAP Proxy from SAP system?
Best Regards

I managed to get the dynamic header configuration at least with inbound proxies:
    DATA:
        server_context TYPE REF TO if_ws_server_context,
        proxy_framework TYPE REF TO if_proxy_framework,
        internal_protocol TYPE REF TO if_wsprotocol_internal,
        lo_inb_pxy TYPE REF TO cl_xms_inbound_proxy_plsrv,
        lo_dyn_header TYPE REF TO if_xms_msghdr30_dynamic.
      server_context = cl_proxy_access=>get_server_context( ).
      internal_protocol ?= server_context->get_protocol( 'INTERNAL' ).
      lo_inb_pxy ?= internal_protocol->get_framework( ).
      lo_dyn_header ?= lo_inb_pxy->xmb_message->get_dynamic_header( ).

Exception when calling ABAP Proxy modelled in SAP PI: CL_SOAP_RUNTIME_ROOT

Hi,
We have a scenario where we:
1. Modell an interface in SAP PI
This interface contains a complex type from a different namespace
2. Use it to create an ABAP proxy in backend system
3. Configure it with SOAManager
4. Call the ABAP proxy ws directly from a third-party system (biztalk)
We're currently testing calling the ABAP proxy from soapUI, but get a strange exception thrown by the SOAP framework in ABAP backend.
The test in soapUI is setup by importing the WSDL acquired from SOAMANAGER.
The error message we in the SOAP response is:
CX_SY_REF_IS_INITIAL:Exception CX_SOAP_ROOT occurred
(program: CL_SOAP_RUNTIME_ROOT==========CP, include: CL_SOAP_RUNTIME_ROOT==========CM004, line: 130)..
An exception with the type CX_SY_REF_IS_INITIAL occurred, but was neither handled locally,
nor declared in a RAISING clause.Dereferencing of the NULL reference
It is a very low level error from the CL_SOAP_RUNTIME_ROOT program and not a descriptive error message at all.
We've checked the user and the authorizations it has, we've redone the SOAManager config but the problem persists.
We find no dumps in the ABAP proxy since the request never reaches it.
For a limited time I'll make WSDL and SOAP response available
WSDL (some values anonymized) available at http://dl.dropbox.com/u/4379928/SOAP/project.wsdl
Complete SOAP response is available at http://dl.dropbox.com/u/4379928/SOAP/soap_data.xml
Any ideas on where to look?

Hi,
We've now managed to implement a workaround.
The workaround was to create the endpoint in PI as well.
So that the traffic goes from third-party solution->PI-> WS-enabled ABAP Proxy
When we did this initially, we got some errors related to the asynch method of this call, but this was resolved by changing the channel from "best effort" to "Guaranteed delivery".
Still we don't know what the root cause of the initial problem was, but we assume it is related to the asynch nature of the service (though we have other asynch proxies that work without problems).
Regards
Dagfinn

Abap proxy settting in business system side

Hi all;
I am trying to activate abap proxy environment at the business system(640) with the web blog document https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3022. [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
but i am still getting "no connection to integration builder" when SPROXY at the r/3(640).
according to some article, i have to maintain exchangeProfile at the r/3 side, but i could not get into business system with 50000port exchangeProfile, but 8000port is available.
so is it right? i have to maintain exchangeProfile at the business system(r/3).
result of some test is below;
1. sldcheck is no problem. - no problem.
2.Check/maintain with report: SPROX_CHECK_IFR_ADDRESS
3.Check with report SPROX_CHECK_HTTP_COMMUNICATION
4.Check with report SPROX_CHECK_IFR_RESPONSE
5.Check with report SPROX_CHECK_IFR_CONNECTION
number 2, SPROXYSET TABLE is empty value
In Exchange Profile http://sapxi.hh.net:50000/rep
In Table SPROXSET
Status OK: Address maintained
number 3, result
HTTP communication functioning
number 4, i got error "HTTP error(return code 400, message "ICM_HTTP_CONNECTION_FAILED").
number 5, i got error "Integration Builder data not understood"
please guide me in order to activate connection to integration builder.
thanks in advance
venjamin

Hi Venjamin -
Can you confirm a few things first:
1. In SXMB_ADM of R/3 goto Integration Engine Configuration. Is Role set up as Application System and do you have a value for Corresponding Integration Server? If so, please paste that value here.
2. In SM59, for the HTTP destination pointing to your Integration Server, what is the result of your connection test? You should be getting something like "HTTP/1.0 500 Empty HTTP request received" at the top.
3. Also in SM59, do your test connections work for both LCRSAPRFC and SAPSLDAPI?
4. Is your R/3 system a unicode system or non-unicode system? Have the LCRSAPRFC and SAPSLDAPI destinations on both the abap and j2ee side been configured accordingly?
By the way, there is no exchangeProfile for R/3...
Regards,
Jin

ABAP proxy with Multiple PI system and Single SAP ECC

Hello Folks,
In my current project i have 2 SAP Pi system, PI7.0 and PI7.11. Currently 80% of the interfaces are on PI7.0 and we are planning to move interfaces to new PI7.11 next year. Old environment has lot of ABAP proxies ECC is configured to send data to it.
All the new developments will be done in new SAP and i need to use SAP PI7.11 for that. I have an interface where i need to use ABAP proxy.
How can i configure ECC so that it sends new ABAP proxy interface data to new PI7.11 and old proxies to old PI7.0.
As far as i know we can make ECC point to one integration server at one time. Any thoughts or suggestion ?
Regards
Inder

Hi,
Multiple connection to ESR in sproxy can be done by switching host value in RFC destination SAP_ESR_PROXY and for maintaining multiple PI runtime you should use subparameter for parameter SXMB_ADM->Runtime->IS_URL (you can define combination of Sender/Receiver for subparameter in transaction SXMSIF).
This way for every sender/receiver combination you can use different integration server.
Regards,
Gourav

Steps in BW for intigration with PI system through ABAP proxy communication.

Hello Experts,
Need your help.
We need to extract data from PI system through ABAP proxy communication. Kindly suggest the steps need to be perform on BW side.(from data source creation to setting up the delta queue )
Thanks,
Arpan

Hi Raja Sekhar,
Thanx for the quick reply.
If i have got you point right, you are telling me to right a program that will fetch the PO's and push the data into our Interface.
Let me explain you the complete scenario, we already have a ECC to SUS thrgh PI implemeted for the same PO's generated. Our requirement is that depending on the vendor details in PO's we have got to route the PO details to either SUS or BPM.
I had thought of writing a prgm but the abapers feel that a standard BADI for the same would lessen their efforts.
Meanwhile can you explain with a little more detail the standard approach you are referring to... probably some material relating to this would help us...
thanx a lot..
waiting for your reply,
Nandan

ABAP Proxy on XI System itself?

Similar Messages

Maybe you are looking for