ABAP Proxy to SOAP Error..

Hello,
I am testing few scenarios which are built on ABAPproxy to SOAP. Most of the scenarios are working. But, couple of scenarios throwing "MAPPING.NO_MAPPINGPROGRAM_FOUND Interface mapping Object ID"
I am sure that this is very familiar error and i have gone through few threads here.
And most are telling that due to RFC calls. I checked my runtime cache, have revisted my mappings. Couldn't find any clue.
Is there any other checks i have to do for this to work.
Thanks in advance,
Srinivas

Hello Guru and Raj,
Thank you very much. I have gone thorugh other forums. Looks like there is something wrong either my SOAP message format or with my mapping which is not doing correct format. Since it is error message may be my proxy is not accepting. And yes it is a synchronous call.
Let me dig again and get some clues.
If it is XML format issue which my web service is not accepting. Do i have to change my mapping and check. Not sure at this point.
The message i am seeing is similar to what you posted. But, i am getting Application error.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">- <SOAP:Header>
- <SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
<SAP:MessageClass>ApplicationError</SAP:MessageClass>
<SAP:ProcessingMode>synchronous</SAP:ProcessingMode>
Thanks,
Srini

Similar Messages

ABAP-Proxy to SOAP: Error in SOAP Adapter

Hi!
I would like to implement ABAP-Proxy to SOAP scenario.
Unfortunately my SOAP receiver channnel has the following error:
SOAP: call failed: java.io.IOException: No SOAP Envelope but 1 definitions; HTTP 200 OK
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: No SOAP Envelope but 1 definitions; HTTP 200 OK: java.io.IOException: No SOAP Envelope but 1 definitions; HTTP 200 OK
Furthermore the call of /sap/bc/soap/rfc of business system B is erroneous
http://<server system B>:8000/sap/bc/soap/rfc
Here I get the error: HTTP 500 Internal Server error
Can some one help me to solve this problem?
Thank you very much!
regards
Holger

Hi,
Are you using the webservice exposed by SAP or it is third party webservice. Can you explain your complete scenario? What is the url you have given in your receiver SOAP Channel? Was that no configured earlier?
If at all you are using the SAP webservice, the wsdl link should be.
http://<server>:<http port>/sap/bc/soap/wsdl11?services=BAPI_MATERIAL_EXISTENCECHECK&sap-client=200
The target url you will be able to see in the wsdl itself also
amit

Error while invoking the ABAP Proxy via SOAP Adapter

Hi,
My scenario involves SOAP Client invoking a webservice hosted in PI which in turn invokes the ABAP Proxy asyncronously.
SOAP Client -> PI -> ECC (ABAP Proxy) . This works fine.
Next , I have exposed the ECC Service Interface as webservice using SOA Manager transaction. Now, once the service is created using SOAManager, i replaced the XI Adapter with SOAP Adapter and provided the target URL as the URL provided by the SOAManager.
SOAP Client -> PI -> ECC (ABAP Proxy via SOAP Adapter)
With this approach, i am encountering the below error message
2009-05-29 12:17:55 Error Adapter Framework caught exception: null
2009-05-29 12:17:55 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException.
Any ideas on the above errror message? Any pointers or inputs will be appreciated.
Thanks,
Vinayak Kamath

> 2009-05-29 12:17:55 Error Adapter Framework caught exception: null
> 2009-05-29 12:17:55 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException.
This is a generic error message which does not have any information about the error which has occurred.
Do you see any error messages in the SOAP client?
Regards
Stefan

Abap proxy 2 soap

Hi,
this scenario is abap proxy 2 soap ,, , source system send some data to target webservice and target webservice return approval number.
I checked target url and soap action in receiver soap adapter, and those value is correct.
on sxmb_moni
i got NO_MAPPINGPROGRAM_FOUND
http://test.test.com/pt/ses001/approvalprocess SES001_IM does not exist in runtime cache</SAP:Stack>
and Applicatoin Error
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="UNKNOWN">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>application fault</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="http://xml.apache.org/axis/">hostname</SAP:ApplicationFaultMessage>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
here is Sent message log on MDT.
2006-08-29 13:25:37 Error SOAP: response message contains an error Application/UNKNOWN/APPLICATION_ERROR - application fault
2006-08-29 13:25:37 Success SOAP: response message leaving the adapter
2006-08-29 13:25:37 Success Application attempting to send an XI message asynchronously using connection AFW.
2006-08-29 13:25:37 Success Trying to put the message into the send queue.
2006-08-29 13:25:37 Success The response message for message 44f23177-e6ed-0270-0000-000046028211(INBOUND) was successfully transmitted to the calling application.
2006-08-29 13:25:37 Success The message status set to DLVD.
2006-08-29 13:25:37 Success The application sent the message asynchronously using connection AFW. Returning to application.
here is Receive message log on MDT.
2006-08-29 13:25:37 Success The message was successfully received by the messaging system. Profile: XI URL: http://xi0034:50000/MessagingSystem/receive/AFW/XI
2006-08-29 13:25:37 Success Using connection AFW. Trying to put the message into the request queue.
2006-08-29 13:25:37 Success Message successfully put into the queue.
2006-08-29 13:25:37 Success The message was successfully retrieved from the request queue.
2006-08-29 13:25:37 Success The message status set to DLNG.
2006-08-29 13:25:37 Success Delivering to channel: R_TEST_SOAP_SSS001
2006-08-29 13:25:37 Success SOAP: request message entering the adapter
2006-08-29 13:25:37 Success SOAP: completed the processing
2006-08-29 13:25:37 Success SOAP: response message received 6bc3e4d0-3716-11db-a265-00145e483080
2006-08-29 13:25:37 Error SOAP: response message contains an error Application/UNKNOWN/APPLICATION_ERROR - application fault
i can see source data on sxmb_moni.
<?xml version="1.0" encoding="utf-8" ?>
- <nr1:APPROVALREQ_SES_MT xmlns:nr1="http://test.test.com/pt/ses001/approvalprocess">
<TITLE>46</TITLE>
<GUBUN />
<REQUESTOR>46</REQUESTOR>
<TEXTLINE>SAFSAFSAFDSAF</TEXTLINE>
</nr1:APPROVALREQ_SES_MT>
request message mapping of request
<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:ApprovalRequest xmlns:ns1="http://70.2.207.241:8080/axis/ApprovalService.jws">
<args1>46</args1>
<args2>46</args2>
</ns1:ApprovalRequest>
I can not see any return value comming from target webservice on sxmb_moni.
request message mapping error on response
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="UNKNOWN">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>application fault</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="http://xml.apache.org/axis/">hostname</SAP:ApplicationFaultMessage>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
payload of request message mapping of response
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
<ns2:hostname xmlns:ns2="http://xml.apache.org/axis/">ibmr52</ns2:hostname>
please check what was my fault.
thanks
venjamin

Hi Bhavesh.
thanks for the note.,,
please look at the bottom of this content.
i can not see "Method=Approval" between jws and args1 even though i set SOAP Action = Approval on Receiver SOAP Adapter.
is this happening something wrong? or is it normal log?
<?xml version="1.0" encoding="UTF-8"?>
<ns1:ApprovalRequest xmlns:ns1="http://70.2.207.241:8080/axis/ApprovalService.jws"><args1>333</args1><args2>333</args2></ns1:ApprovalRequest>
SAP_512dbe91-372d-11db-b291-00145e483080_END
here is detail message log on MDT.
--SAP_512dbe91-372d-11db-b291-00145e483080_END
Content-ID: <[email protected]>
Content-Disposition: attachment;filename="[email protected]"
Content-Type: text/xml; charset=utf-8
Content-Description: SOAP
<SOAP:Envelope xmlns:SOAP='http://schemas.xmlsoap.org/soap/envelope/'><SOAP:Header>
<sap:Main xmlns:sap='http://sap.com/xi/XI/Message/30' versionMajor='3' versionMinor='0' SOAP:mustUnderstand='1' xmlns:wsu='http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd' wsu:Id='wsuid-main-92ABE13F5C59AB7FE10000000A1551F7'>
<sap:MessageClass>ApplicationMessage</sap:MessageClass>
<sap:ProcessingMode>synchronous</sap:ProcessingMode>
<sap:MessageId>44f23fa9-e6ed-0270-0000-000046028211</sap:MessageId>
<sap:TimeSent>2006-08-29T07:10:08Z</sap:TimeSent><sap:Sender><sap:Party agency='' scheme=''></sap:Party>
<sap:Service>BS_SAPR3_SSS0017</sap:Service></sap:Sender><sap:Receiver>
<sap:Party agency='' scheme=''></sap:Party><sap:Service>BS_MMM_D</sap:Service></sap:Receiver>
<sap:Interface namespace='http://sds.samsung.co.kr/pt/sessingle001/approvalprocess'>APPROVALREQ_MMM_IB</sap:Interface>
</sap:Main><sap:ReliableMessaging xmlns:sap='http://sap.com/xi/XI/Message/30' SOAP:mustUnderstand='1'>
<sap:QualityOfService>BestEffort</sap:QualityOfService></sap:ReliableMessaging>
<sap:Diagnostic xmlns:sap='http://sap.com/xi/XI/Message/30' SOAP:mustUnderstand='1'>
<sap:TraceLevel>Information</sap:TraceLevel><sap:Logging>Off</sap:Logging></sap:Diagnostic><sap:HopList xmlns:sap='http://sap.com/xi/XI/Message/30' SOAP:mustUnderstand='1'>
<sap:Hop timeStamp='2006-08-29T07:10:08Z' wasRead='false'><sap:Engine type='BS'>BS_SAPR3_SSS0017</sap:Engine>
<sap:Adapter namespace='http://sap.com/xi/XI/System'>XI</sap:Adapter><sap:MessageId>44f23fa9-e6ed-0270-0000-000046028211</sap:MessageId><sap:Info>3.0</sap:Info></sap:Hop>
<sap:Hop timeStamp='2006-08-29T07:09:06Z' wasRead='false'>
<sap:Engine type='IS'>is.00.xi0034</sap:Engine>
<sap:Adapter namespace='http://sap.com/xi/XI/System'>XI</sap:Adapter>
<sap:MessageId>44f23fa9-e6ed-0270-0000-000046028211</sap:MessageId><sap:Info>3.0</sap:Info></sap:Hop><sap:Hop timeStamp='2006-08-29T07:09:08Z' wasRead='false'>
<sap:Engine type='AE'>af.sxd.xi0034</sap:Engine><sap:Adapter namespace='http://sap.com/xi/XI/System'>XIRA</sap:Adapter>
<sap:MessageId>44f23fa9-e6ed-0270-0000-000046028211</sap:MessageId></sap:Hop></sap:HopList></SOAP:Header><SOAP:Body>
<sap:Manifest xmlns:sap='http://sap.com/xi/XI/Message/30' xmlns:xlink='http://www.w3.org/1999/xlink' xmlns:wsu='http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd' wsu:Id='wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7'/></SOAP:Body></SOAP:Envelope>
--SAP_512dbe91-372d-11db-b291-00145e483080_END
content-id: [email protected]
content-type: application/xml
<?xml version="1.0" encoding="UTF-8"?>
<ns1:ApprovalRequest xmlns:ns1="http://70.2.207.241:8080/axis/ApprovalService.jws"><args1>333</args1><args2>333</args2></ns1:ApprovalRequest>
SAP_512dbe91-372d-11db-b291-00145e483080_END
thanks
venjamin
Message was edited by: venjamin

ABAP Proxy to SOAP using PI

Dear Friends,
I have the requirement ABAP Proxy to SOAP using PI.
In R/3 I had generated the proxy , after that what I need to do.
Please suggest me.
Regards,
Shalini Shah

Hi Shalini,
There are loads of blogs and discussion threads available to help you with this scenario. Just check the following links:
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d23cbe11-0d01-0010-5287-873a22024f79?quicklink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/advancedsearch?query=proxytosoap+scenario
Please go ahead and check the documents and let us know if you have any doubt.
Rgds,
Puneet

Error in synchronous( abap proxy to soap)scenario

Hi experts,
My scenario is synchronous abap proxy to sysnchronous soap. for proxy I am using business system name as ERDCLNT220 and soap business system name as BS_HRS_DEV
configuration steps are
1. only client proxy to soap scenario I have done.
communication channels: only receiver soap adapter. no proxy sender communication channel for client proxy.
Already we have RFC destination connection and connection type H for proxy to xi.
1.Is it required RFC destination connection for xi to server proxy.
2.Is it required receiver proxy communication channel for server proxy?.
i HAVE TESTED THIS INTERFACE. I am able to send the request. But I am not able to receive the response from soap webservice message .
error is:
SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Exception occurred while trying to invoke service method getPerson
exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Exception occurred while trying to invoke service method getPerson
Error Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Exception occurred while trying to invoke service method getPerson
Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Exception occurred while trying to invoke service method getPerson. Setting message to status failed.
Kindly help me.
advance thanks
thanks and regards
elton
Edited by: eltonsaranya on May 9, 2011 10:27 AM

Your exception message shows problem at the webservice side.
Check the following:
a) you need two mappings one for proxy req to soap request and other soap response to proxy response
b) You need to create service interfaces both sender and receiver synchronous .
c) communication channel QOS is best effort for both sender and receiver
d) I dont see problem in soap configuration. Bcuz you are able to ping and while getting response from the method getPerson it fails.
f) See your SOAP response structure matches with WSDL provided.
g) You can also test outside PI.. I meant testing via soap client tool like SOAPUI for that web service. So that you know whether problem exists on the target system or not.
Hope that helps.

FTP to ABAP Proxy Scenario - getting error CO_TXT_CHANNEL_PASSWORD_ERROR

We have transported PI and EP data from development server to respective production, every thing is running fine except the abap proxy scenarios i.e. PI reads file from ftp location and calls the abap proxy but we are getting following errors:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_CHANNEL_PASSWORD_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to read user password from communication channel of type Error when accessing the secure store (access ID = FD768D4A8772DB50E1000000AC10041E) Error while reading from the secure store: ERROR_UNKNOWN: Cannot find entry in secure store (SECSTORE,023)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Any solution?
Please note that I have searched and applied solutions given on SDN forums but didn't get any success. So I am looking for new suggestions.
Regards,
Jawed Ali

Jawed ,
Please test the HTTP destination of your receiver comm channel.
Which is the RFC connection to your R3 system.
Transaction SM59 and check the logon parameter for the connection you are using.
Regards,

Consume web service in ABAP proxy with SOAP header

Hi Thomas ,
I am trying to consume web service in ABAP . I have followed the procedure from one of your web blog <a href="/people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap a Developer's Journal Part XIV - Consuming WebServices with ABAP</a> . (640 release).
I need to pass SOAP header along with SOAP body. As you mentioned I have used if_wsprotocol_ws_header interface to pass header but it is still failing.
Please see below code and please give some direction to fix the issue.
1.Create ABAP proxy for WSDL (http://ws.strikeiron.com/SwanandMokashi/StockQuotes?WSDL). It has created structures only for SOAP body.
2.Create Logical port
3.Create following program to call proxy
REPORT zproxy.
DATA: ref_stock TYPE REF TO zzco_stock_quotes_soap ,
      ws_header TYPE REF TO if_wsprotocol_ws_header,
      name TYPE string,
      namespace TYPE string.
TRY.
    CREATE OBJECT ref_stock
get WS_HEADER protocol
    ws_header ?= ref_stock->get_protocol('IF_WSPROTOCOL_WS_HEADER').
set somehow header as iXML-DOM tree
    DATA: ixml TYPE REF TO if_ixml,
          xml_document TYPE REF TO if_ixml_document,
          xml_root TYPE REF TO if_ixml_element,
          xml_element TYPE REF TO if_ixml_element,
          xml_node TYPE REF TO if_ixml_node.
    DATA l_xstring        TYPE xstring.
    DATA l_string         TYPE string.
    FIELD-SYMBOLS <fs_xstring> TYPE xstring.
Additional Header:
    CONCATENATE
'<soap:Header>'
'<s1:LicenseInfo xmlns:s1="http://ws.strikeiron.com">'
'<s1:RegisteredUser>'
'<s1:UserID>[email protected]</s1:UserID>'
'<s1:Password>aaaaaaaa</s1:Password>'
'</s1:RegisteredUser></s1:LicenseInfo>'
'</soap:Header>' INTO l_string.
convert to xstring
    l_xstring = cl_proxy_service=>cstring2xstring( l_string ).
    IF NOT l_string IS INITIAL.
    create iXML DOM document from XML xstring
      CALL FUNCTION 'SDIXML_XML_TO_DOM'
        EXPORTING
          xml           = l_xstring
        IMPORTING
          document      = xml_document
        EXCEPTIONS
          invalid_input = 1
          OTHERS        = 2.
      IF sy-subrc = 0 AND NOT xml_document IS INITIAL.
        xml_root = xml_document->get_root_element( ).
        xml_element ?= xml_root->get_first_child( ).
      add header element by element to SOAP header
        WHILE NOT xml_element IS INITIAL.
          name = xml_element->get_name( ).
          namespace = 'http://swanandmokashi.com' . "xml_element->get_namespace_uri( ).
          IF NOT xml_element IS INITIAL.
          ENDIF.
          ws_header->set_request_header(
                      name = name
                      namespace = namespace
                      dom = xml_element ).
          xml_element ?= xml_element->get_next( ).
        ENDWHILE.
      ENDIF.
    ENDIF.
CATCH cx_ai_system_fault .
ENDTRY.
*Call soap body using abap proxy class.
DATA: get_quotes TYPE zzget_quotes_soap_out .
DATA: get_quotes1 TYPE zzget_quotes_soap_in .
get_quotes1-quote_ticker = 'GE'.
TRY.
    CALL METHOD ref_stock->get_stock_quotes
      EXPORTING
        get_quotes1 = get_quotes1
      IMPORTING
        get_quotes = get_quotes.
CATCH cx_ai_system_fault .
CATCH cx_ai_application_fault .
ENDTRY.
4.It is throwing cx_ai_system_fault error.
SOAP details:
Input:
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:enc="http://schemas.xmlsoap.org/soap/encoding" >
<soap:Header>
<s1:LicenseInfo xmlns:s1="http://ws.strikeiron.com">
<s1:RegisteredUser>
<s1:UserID>[email protected]</s1:UserID>
<s1:Password>aaaaaaaa</s1:Password>
</s1:RegisteredUser>
</s1:LicenseInfo>
</soap:Header>
<soap:Body>
<tns:GetQuotes xmlns:tns="http://swanandmokashi.com">
<tns:QuoteTicker>GE</tns:QuoteTicker>
</tns:GetQuotes>
</soap:Body>
</soap:Envelope>
Thanks,
Kavitha.

Hi ,
Thank you for the response. Did you passed user email and password ([email protected] /aaaaaaaa) part of licenseinfo->resisteredUser along with Quoteticker GE in analyzer?
<a href="http://www.strikeiron.com/Analyzer/OnlineAnalyzer.aspx?WSDL=http://ws.strikeiron.com/SwanandMokashi/StockQuotes?WSDL">ANALYZER</a>
Thanks,
Kavitha.

ABAP Proxy without SOAP adapter in PI7.3

Hi All,
We have dual stack implementation of PI7.3 but we do not wish to use the SOAP adapter for configuring an ABAP proxy scenario.
Is this possible? Is the Javastack only configuration in NW Admin available for use in dual stack implementation also?
Thanks and Regards,
Diptee

Hi All,
So it essetially means that only the below 2 options are available for ABAP proxy scenarios in PI7.3 for a ABAP+Javastack installation
- use of SOAP adapter over XI protocol
- use of conventional proxy configuration of the ABAP Integration Server
And the only Javastack config cannot be used for a dual stack implementation.
Please confirm if above is correct.
Regards,
Diptee
Edited by: diptee s on Sep 21, 2011 4:48 PM

Call ABAP-Proxy with SOAP adapter?

Hi all,
for a PI7.1-scenario I would like to use the Lookup-API in mapping. As I know I can use either RFC or SOAP channels, however I would rather call an ABAP-Proxy in my backend system instead.
So my question is: Is it technically possible to use the SOAP-adapter to call an ABAP-Proxy?
Your help would be appreciated, best regards
David

Hi Stefan,
Interesting answer here and one that has got me curious. Hope you can help.
1. When you say it is going to be possible to call a ABAP proxy using a UDF in the mapping of XI ( Lookup ), would it be using the WS Adapter of PI 7.1?
2. If 1 is yes, is there a new API code to do this, or is it the same lookup code as used previously in XI 3.0 and PI 7.0 Days?
3. If 1 is no, can you explain maybe a little more on how this would be possible using the standard SOAP adapter of XI?
Thanks a bunch.
Regards
Bhavesh

ABAP Proxy to SOAP - Logon to Web Application Server Required

Hello XI Experts,
I have set up an ABAP Proxy->SOAP example in my IDES system. Everything is working correctly.
However, when I execute the program which makes the call to the method "EXECUTE_SYNCHRONOUS", a popup appears asking me to enter logon details to the web application server.
Where do I set the logon information such that this popup no longer appears?
Thanks in advance,
NW.

Hi Nicholas !
Check this thread:
ABAP Proxy configuration
I think it has useful tips about what you should check.
Regards,
Matias
ps: please award points if helpful

Inbound Abap Proxy - Message ID error

Hi,
We are on XI 2.0. We have a scenario of flat file --> XI --> R/3 via ABAP Proxy. The file is processed in XI through file adapter, converted to XML doc, and sent to R/3. In Monitor of R/3 we get the error mesage "Message ID XXXXXXXXXXXXXX for pipeline CENTRAL already exists in called system".
Has anyone come across this error? Any help is much appreciated.
Thanks in advance.
Best Regards,
Doo

Hi Venki,
It has a status of 'Processed Successfully (Message Processed)' in XI. In R/3 it has a status of 'Message Already Processed'.
Best Regards,
Doo

AAE- Sender ABAP Proxy to SOAP - Payload not reaching PI 7.10 SP4

Hi friends,
I am developeing interface from Solman to PI to 3rd party.
I configured the interface using ABAP stack and it worked fine. Then i changed the RFC destination used in SXMB_ADM to point to adapter engine so that i can use AAE.
I configured SOAP adapter. I wonder there is no option to select BE, EO or EOIO in PI7.30 when we select XI protocol.
I can see my payload in SXMB_MONI is solution manager but the payload is not reaching SAP PI although i am receiving the message and can see error also in Adapter.
Does we need to do anything different in PI configuration to achieve it ?
Regards
Inder

Hi Baskar,
I am on 7.30 so it should work. I created another interface and it works fine.
The only difference between my interface which is not working is "Java Mappping" and also i have custom adapter module on receiver channel.
I think the reason for failure is custom Java adapter as it is called before the mapping is executed(In AAE mapping is executed by receiver adapter chain and i configured module before that)
I think i need to redesign my adapter module to manipulate input payload of mapping rather than output payload.
Regards
Inder

Proxy to soap error

hi,
I am doing proxy to saop asyncronous scenairo, In SXMB_MONI it is chequerd flag but in rwb i m getting error in response with following details.
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: The header 'ReliableMessaging' from the namespace 'http://sap.com/xi/XI/Message/30' was not understood by the recipient of this message, causing the message to not be processed. This error typically indicates that the sender of this message has enabled a communication protocol that the receiver cannot process. Please ensure that the configuration of the client's binding is consistent with the service's binding.
What could be the reason. please advise.
Regards
Laxmi Bhushan

Thanks Stefan.
Solved
Regards
Laxmi Bhushan

ABAP proxy exception to SOAP fault and vice versa not getting mapped

Hi there,
I have these scenario's: ABAP proxy to SOAP (AXIS framework) and the other way around, synchronous, using AAE.
When declaring the Synchronous Service interfaces we also defined error message types in order to pass system and application exceptions back to the service consumers.
The behavior we are observing is as follows;
When an exception is generated on the ABAP proxy, the error message type is correct generated and filled with the corresponding values in the ABAP proxy runtime. However, when the response arrives at the service consumer, it only contains a SOAP fault filled with some kind of generic PI mapping exception information.
1. Why is the original ABAP proxy exception not mapped/passed into the SOAP response?
2. What can we do in order to change that situation?
3. Does it has to do with the use of the AAE - Advanced Adapter Engine or the AXIS framework?
PS: We have performed a test of the Operation Mapping - OM using the ABAP exception as input and it did work correctly, so the error structure seems to be Ok.
Many thanks for your replies.
Edited by: Roberto Viana on Jul 26, 2010 8:30 PM

Problem was caused by some differences in namespaces between source and target.

ABAP Proxy to SOAP Error..

Similar Messages

Maybe you are looking for