ABAP Proxy To XI

Hi All,
I hope i can get an answer to lingering problem that we have currently.
We manage to configure to have XI --> ECC 5.0 (through Proxy / XI Adapter)
We have another scenario where we are using ECC 5.0 through ABAP proxy to send messages to XI. However, we are facing the following error message :
<SAP:Code area="INTERNAL">DESTINATION_NOT_FOUND</SAP:Code>
<SAP:Stack>HTTP Destination_Receiver missing (system , transaction SM59)</SAP:Stack>
1. SM59 ECC --> XI HTTP Connection Test is Ok
2. SCIF T-Code. XI services all activated
3. SM59 XI --> ECC HTTP connection test was ok
4. XI --> ECC (via XI Adapter Scenario --This is ok)
5. SM59 - Deleted and recreate the connection
6. Regeneration of the Message Interface in ECC
Thank you
Sulaiman

hi asari,
ABAP proxy objects can only be generated for SAP systems that are based on SAP Web Application Server 6.40.
The proxy generation retrieves the WSDL description of the interface from the Integration Repository using HTTP. The address of the appropriate server is taken from the exchange profile (parameters 1, 2, and 3 u2013 see below). Queries to the Repository are subject to authentication. The user and password for these queries are also taken from here (parameters 5 and 6). Information used to navigate from the ABAP Proxy Generation to the initial page of the Integration Builder is also taken from the exchange profile (parameters 1, 2, and 4).
Example configuration for accessing
interfaces in the Integration Repository (exchange profile)
check link
http://help.sap.com/saphelp_nw04/helpdata/en/86/58cd3b11571962e10000000a11402f/frameset.htm
reward points if helpfull
regards
kummari

Similar Messages

Error while activating ABAP proxy object

Hello,
I can see all the interfaces of PI7.0 in my ECC6.0 system.
I am able to create abap proxy object of a interface.
But when I try to activate that I am getting error as
"RFC system error for destination GTADIR_SERVER".
Pl can you suggest. appreciate quick help in this.
thanks in advance,
Sharada

Hi,
For more details take a look at note: [1063482 - Creating Dictionary objects - RFC error GTADIR_SERVER|https://service.sap.com/sap/support/notes/1063482]
It is written that: Message SGSUB 104 is not an error message, but is merely irrelevant information for customers. You can continue to create objects nevertheless.
To get rid of this annoying error you have to implement the corresponding support package.
Regards,
Jakub

Activate abap proxy withou java stack on ECC side

Hi gurus,
Can we activate abap proxy on ECC side if the ECC don't hava java stack? As you know , we need to create two jco RFC provider in Visual Administrator, but without installing java stack, we can't do that. Any ideas? Thanks in advance.

Thanks all.
Solved by using program id of XI system in the RFC of application system.
But we still face the issue in SPROXY. It gave the error "No connection to Integration Builder ".
Then I runned connection test, and found SPROX_CHECK_IFR_ADDRESS and SPROX_CHECK_HTTP_COMMUNICATION
are right, but SPROX_CHECK_IFR_RESPONSE and SPROX_CHECK_IFR_CONNECTION are giving the error "Integration Builder data not understood". Any ideas?
Edited by: xinjiang li on Sep 10, 2010 6:40 PM

SAP PI 7.4 SOAP - ABAP Proxy Synchronous Webservice

Hi Everyone,
I am developing the following scenario:
3rd party makes a SOAP call to SAP (via PI) to determine whether a vendor exists or not in the SAP system. The link for the call is provided by us from the Integrated Configuration.
The request comes in, calls an ABAP Proxy to check if a vendor exists and sends a response back to the SOAP call with a 'Y' or an 'N'.
I've read a lot about various scenarios but I'm having trouble connecting the dots as I'm fairly new to PI. I'd appreciate any help.
I've made the following set-up based on assuming I need separate Service Interfaces for the SOAP Request & Proxy Response
ESR
1. Message Types
     SOAP (MT_SOAP_REQ & MT_SOAP_RESP) - PROXY (MT_PRXY_REQ & MT_PRXY_REQ)
2. Message Mappings
     MM_REQUEST    which maps MT_SOAP_REQ   to MT_PRXY_REQ)
     MM_RESPONSE which maps MT_PRXY_RESP   to MT_SOAP_RESP)
3. Service Interfaces (Synchronous)
    (SOAP Request)
    SI_IN (Inbound Interface)       with Request = MT_SOAP_REQ and Response = MT_SOAP_RESP
   (Proxy Response)
    SI_OUT (Outbound Interface) with Request = MT_PRXY_REQ and Response = MT_PRXY_RESP
4. Operation Mapping
    OM_LOOKUP which maps SI_IN to SI_OUT with Request    (MT_SOAP_REQ to MT_PRXY_REQ)
                                                                    and Response (MT_SOAP_RESP to MT_PRXY_RESP)
I create the ABAP Proxies for each Service Interface. SI_IN contains the required coded method to check if there is a vendor.
I create the webservice and binding for SI_IN in SOAMANAGER
At this point I'm somewhat unsure - what do I need to do for SI_OUT ? Do I need to create a logical port ? how is SI_OUT associated to SI_IN (apart from the Operation) to get the response.
ID
In the Integration Directory I've created a SOAP_SENDER communication channel for System A and SOAP_RECEIVER channel for SAP. For the SOAP Receiver I need to specify a URL - what should this be ? Is it meant to point to the web service for SI_IN in SICF or just to the generic http://host:8000/sap/xi/engine?type=entry
Do I need to use the HTTP_AAE adapter for the receiver instead of SOAP ?
I created an Integrated Configuration for the SI_IN Service Interface with comm channel SOAP_SENDER from System A and SOAP_RECEIVER for SAP backend. I then got the WSDL for this to provide to the 3rd Party to test (via SOAP UI) . Again my concern is how is the SI_IN linked to the SI_OUT to achieve the response ?
I appreciate you taking the time to go through this . Any help is greatly appreciated.
Thanks very much
Gary

I create the webservice and binding for SI_IN in SOAMANAGER
At this point I'm somewhat unsure - what do I need to do for SI_OUT ? Do I need to create a logical port ? how is SI_OUT associated to SI_IN (apart from the Operation) to get the response.
>>>>No need to do anything in SOAMANAGER
Do I need to use the HTTP_AAE adapter for the receiver instead of SOAP ?
>>> No. Soap adapter is fine. Configure your receiver channel as explianed in the below blog (section 4.3)
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70066f78-7794-2c10-2e8c-cb967cef407b?overridelayout=t…
Again my concern is how is the SI_IN linked to the SI_OUT to achieve the response ?
>>>>Your receiver determination and interface determination takes care of this.(receiver interface & outbound processing tabs in ICo)

How to change default PIRWBUSER password for ABAP Proxy monitoring ?

Hi,
Please advise how to change setting for PIRWBUSER in PI so no need to use master password PI in ECC server.
In the Message monitoring you can have option to monitoring ABAP Proxy transaction in the other SAP Instance. But of course you need to have PIRWBUSER in that target SAP instance.
How to change this configuration for PIRWBUSER for other SAP Instance. because other SAP instance it migh have different password for PIRWBUSER ?
Regards
Fernand

Hello there.
Please check the note below according to your system:
#999962 - PI 7.10: Change passwords of PI service users
#936093 - XI 7.0: Changing the passwords of XI service users
#721548 - XI 3.0: Changing the passwords of the XI service users
Regards,
Caio Cagnani

Problem with Configuration in Production ( ABAP Proxy - XI - FILE)

Hi All,
I have a ABAP Proxy -> XI -> FILE scenario wich is working perfectly in DEV and QAS environment.
When the person responsible for transporting tried to transport the objects in QAS to PRD, the following error happened:
Direction of communication channel |BS_MA_FileServer_PRD | CC_File_PedidosServ_MA_FileServer_IA is incorrect.
Correct the direction or choose another communication channel
BS_MA_FileServer_PRD - Business System (FILE)
CC_File_PedidosServ_MA_FileServer_IA - My FILE Communication Channel
This was what the Basis person sent to me. I don't have access to know exactly what happened. And I really don't know what could be wrong or if maybe a component was created wrongly in Production.
Hope you can help.
Points will be given.
tks.. Daniela

You have mentioned FILE is on the receiving side and ABAP proxy is on sender side.
But the error pasted by you clearly shows syntax of a Sender Agreement .
For receiver agreement it should be |<Sender Service>| |BS_MA_FileServer_PRD | CC_File_PedidosServ_MA_FileServer_IA
Bipin

Can ABAP proxy to consume WSDL file be run as background job for every10min

Hi all,
I have a requirement where I need to build an interface which gatheru2019s the purchase order details and send to external third party software in their required format (as an XML file).
So I should be the first point of contact and should trigger the interface each time a purchase order is generated.
So I am thinking that I should develop a background job for every 10 minutes which will look for new purchase orders and gathers the information of the purchase orders and send them to external third party software in their required format.
I have gone through all the SAP forums and e-Learning but still I have confusion in regards to how is it possible technically? Can some one guide me with some information on the same.
I have a little bit of confusion and want to know few things.
1)     Should I create a web service or should I consume a web service?
2)     If I need to consume a web service, then can I write an ABAP proxy to be run in background fro evry 10 minutes? I mean can we run ABAP proxy as a batch job in the background?
3)     Is there a difference between consuming an XML file and WSDL File?
Any Help will be highly appreciated.
Regards,
Jessica.

There are two options (as I know) to generate XML file.
1. Use XML TRANSFORMATION to get the XML string based your TRANSFORMATION. You can input your data and get back the XML string. Download this string to a file
Test XML generation program is:
types: begin of ty_data,
       num   type i,
       end   of ty_data.
DATA: itab TYPE standard table of ty_Data,
      la_data like line of itab,
      xmlstr TYPE string.
DO 3 TIMES.
la_data-num = sy-index.
APPEND la_data TO itab.
ENDDO.
CALL TRANSFORMATION ztest_np1
SOURCE table = itab
RESULT XML xmlstr.
CALL FUNCTION 'DISPLAY_XML_STRING'
EXPORTING xml_string = xmlstr.
My ZTEST_NP1 transformation. To create a transformation, click on the transformation in the "CALL TRANSFORMATION ztest_np1" statement. Select Simple transformation type.
<?sap.transform simple?>
<tt:transform xmlns:tt="http://www.sap.com/transformation-templates">
<tt:root name="table"/>
<tt:template>
    <table>
      <tt:loop ref=".table">
        <item>
          <tt:value ref="NUM"/>
        </item>
      </tt:loop>
    </table>
</tt:template>
</tt:transform>
XML string is like:
<?xml version="1.0" encoding="utf-8" ?>
<table>
<item>1</item>
<item>2</item>
<item>3</item>
</table>
To use this option, you have to create a transformation and than use it to generate the XML string.
Check this SAP Help
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/7d4719ca581441b6841f1054ff1326/frameset.htm
2. You can concatenate and create an XML string and download that string into a file.
Regards,
Naimesh Patel

How can I call a ABAP proxy class from BADI? PLease help

hi Experts,
    I have a scenario where I have to call a ABAP proxy class from a BADI. How can I do this? Does anybody has sample code for the same?
Please help.
Thanks
Gopal

Hi,
   You can call a method of a class from BADI. Here are the steps.
   1) In the BADI implementation create a object for the proxy class.
   2) Call the Execute_Synchronous method.
    You can define a BADI by using SE18 and you can implement it by using SE19.
Sample code...
================================================
METHOD ZIF_EX_VBADI~CONVERTUPPER.
DATA: OBJ TYPE REF TO ZTESTCLASS.
DATA: IT_DATA TYPE ZIN_MT,
            IT_RES   TYPE ZOUT_MT,
            SEXCEPTION TYPE REF TO CX_AI_SYSTEM_FAULT.
TRY.
      CREATE OBJECT OBJ
         EXPORTING
             LOGICAL_PORT_NAME = 'TESTPORT'.
CATCH CX_AI_SYSTEM_FAULT INTO SEXCEPTION.
ENDTRY.
ENDMETHOD.
================================================
Thanks,
Vivek LR

Error while invoking the ABAP Proxy via SOAP Adapter

Hi,
My scenario involves SOAP Client invoking a webservice hosted in PI which in turn invokes the ABAP Proxy asyncronously.
SOAP Client -> PI -> ECC (ABAP Proxy) . This works fine.
Next , I have exposed the ECC Service Interface as webservice using SOA Manager transaction. Now, once the service is created using SOAManager, i replaced the XI Adapter with SOAP Adapter and provided the target URL as the URL provided by the SOAManager.
SOAP Client -> PI -> ECC (ABAP Proxy via SOAP Adapter)
With this approach, i am encountering the below error message
2009-05-29 12:17:55 Error Adapter Framework caught exception: null
2009-05-29 12:17:55 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException.
Any ideas on the above errror message? Any pointers or inputs will be appreciated.
Thanks,
Vinayak Kamath

> 2009-05-29 12:17:55 Error Adapter Framework caught exception: null
> 2009-05-29 12:17:55 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException.
This is a generic error message which does not have any information about the error which has occurred.
Do you see any error messages in the SOAP client?
Regards
Stefan

BPM file to ABAP proxy

HI all
I´m developing a BPM, this has the following steps:
1º
Reciver Step: this is to read a file , comunication channel type file.
2º transformation Step: maps the MT of the file to a new MT
3º Send step: send syncronously the result of the the map.Using an ABAP proxy. XI adapter.
4ºSwitch step: compares de the value of the result of the syncronous call, with a constant.First branch Send Step to write a file
Second branch nothing.
My question is? Do i have to insert something before the switch. Because i cannot activate the BPM, In the SXI_CACHE i can see and error that says that the value that i´m using to compare the value it is not an object of the payload.
Any idea?
Many thanks
Noelia

Hi,
Last try...
salida_proxy./p1:MT_salidaproxy/row/valor = 0
In the condition editor:
When you do a f4 for the left operanfd text box:
The expression editor opens:
You need to click on the "Interface Variable" radio button and select your container salida_proxy and prove the correct xpath.
Make sure that the Type specified next to the xpath in the expression editor is String.
A f4 in the right operand text box opens a expression ediote, where:
You need to click on the constant radio button, and provide the constant 0.
Again make sure that the xsd trype is String.
In case all this has been done perfectly, then try deleting the switch and recreating it again. You never know, this might do the trick!
Regards,
Smitha.
Message was edited by:
Smitha Rao

OBJECTS_OBJREF_NOT_ASSIGNED error while executing ABAP proxy

Hi ,
I am getting the following error when i try to execute an abap proxy .
Unit ID in Background RFC     001EC9D184F702ECAA8DBC7401DC13E0
Name of First Function Module     SRT_SEQ_SCD_DLV_TRM_QRFC_NEW_C
Inbound Destination Name     WS_SERVICE_02DCA4961A0B_IN
Transaction Code                     SE38
Name of qRFC Queue                     SRTQC_001EC9D184F702ECAA8DBC6FE29753DB
Created On                     28.01.2009
No. of Predecessors                   1
Created At                                    12:44:10
Executed At                     12:44:13
Created At (Time Stamp)     20.090.128.114.410,9989340
User name                                     DEVELOPER
Tcode/program                      CL_SOAP_SCHEDULER_QRFC_NEW====CP
ID of Lock in Background RFC     001EC9D184F702DCAA8DBCA25EC41F5E
Lock Reason                     System error; not executed
Background RFC Scheduler ID              1
Message number                       341
Language Key                            EN
Status Text                               Unit has execution errors
Execution State                             Access using a 'ZERO' object reference is not possible.
Number of Called Function Modules     1
Number of Locks                                    1
Commit Check Disabled               X
Message Class                                  0
Message Variable                             OBJECTS_OBJREF_NOT_ASSIGNED
Executed On                             28.01.2009
and in ST22 transaction i am getting the following dump
Runtime Errors : OBJECTS_OBJREF_NOT_ASSIGNED
Exception         :CX_SY_RF_IS_INITIAL
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
     caught in
    procedure "WSRM_CLONE_FOR_SPECIFIC_OPS" "(METHOD)", nor was it propagated by a
     RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    An attempt was made to access a component (variable: "ME->M_CTX") with a 'ZERO'
    object reference (points to 'nothing').
    An object reference must point to an object (an instance of a class)
    before it can be used to access a component.
    Either the reference has not yet been set or it was set to 'ZERO' using
    a CLEAR statement.
Please help in solving this issue.
Thanks&Regards,
Hamsa Shree

Hi
Runtime Errors : OBJECTS_OBJREF_NOT_ASSIGNED
Check with the SAP Notes Note
557770 - SAP BP: Short dump OBJECTS_OBJREF_NOT_ASSIGNED
may be you get the exact help
Regards
Abhishek

Error while create abap proxy

Hi,
I need to create abap proxy in sap system to push the data from sap system to XI.
when i create ABAP PROXY in sap system in Tcode SPROXY,System displays a error
"objects from other name spaces missing" .
So i am not able to activate the abap proxy.
kindly let me know how to solve this error.
Regards,
Ganesh

Are you using the message type created in external system?
Are any of your Data type element refer structure to other namespace.
Error mention that it does not find the detail structure of any of Datatype element. Check all link are available properly.
Gaurav Jain
Points if answer is helpful

Error while generating ABAP proxy

Hi,
We created a WSDL using lotus notes (Domino) tools. While creating a proxy object using ABAP (transaction SE80), we get the error message "Cannot generate proxy (object missing in WSDL, see long text)" Message no. SPRX084.
We looked at OSS notes and applied 1046046 - Proxy generation problem with external definitions and all dependent notes as we are on a lower support pack. (WAS 6.40. SAPKB64019).
We are wondering if it is anything to do with the format/defintions in the WSDL. Can anyone send me a sample WSDL file that has been used to create an ABAP proxy object successfully. We would like compare the domino generated file. Please note that XI is not involved, we are using ABAP to call a webservice in the internal network application.
Thanks,
Girish

Hi,
I've implemented this proxy without problem and it's working fine in my case (I didn't have to store WSDL file localy and do any changes in it - Netweaver 7.2). If it's not SAP issue as Brad proposed then maybe network admins have set filters that are blocking communication with this service
Best regards
Marcin Cholewczuk

Error while usinjg the JDBC to ABAP Proxy Scenario

Hello Rocks,
This is my scenario like JDBC --- Pi --- ABAP Proxy
while i am given a sender side jdbc XSD structure is like this
VWENTITYAGGREMENT
Row             1-unbound occurence
      POOL_ID   0-1 occurence
      CUST_ID
      AGREEMENT
       PRODUCT_ID
        CONTRACT_TYPE
        CONTRACT_TYPE_DESCR
        AGRMNT_STATUS
        STATUS_DESCR
          EFFDT
         TERMINATION_DT
         ADD_DT
         ADD_TM
while i am writing a select query in Sender JDBC CC is like this
SELECT POOL_ID,CUST_ID,AGREEMENT,PRODUCT_ID,CONTRACT_TYPE,CONTRACT_TYPE_DESCR,AGRMNT_STATUS,STATUS_DESCR,EFFDT,TERMINATION_DT,ADD_DT,ADD_TM FROM vwEntityAgreement.
Here i am getting this Error message like this :
Error Description: Database-level error reported by JDBC driver while executing statement 'SELECT POOL_ID,CUST_ID,AGREEMENT,PRODUCT_ID,CONTRACT_TYPE,CONTRACT_TYPE_DESCR,AGRMNT_STATUS,STATUS_DESCR,EFFDT,TERMINATION_DT,ADD_DT,ADD_TM FROM vwEntityAgreement'. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: Invalid column name 'POOL_ID'.'. For details, contact your database server vendor.
So please give me your valuable inputs !
Regards,
Ravi.

Invalid column name 'POOL_ID'.'. For details, contact your database server vendor.
Did you confirmed the name POOL_ID as suggested?
Why is the tablename different (check the case) in the query that you make and in the XSD structure that you mentioned......check if this is causing the problem.
Regards,
Abhishek.
Edited by: abhishek salvi on Jun 4, 2010 10:24 AM

Error while executing sender ABAP proxy program in ECC

Hi,
We have lot of proxy to file scenarios, most of them are working fine. I am having issue with 2 interfaces, when I execute sender ABAP proxy program, we are getting following errors in ECC:
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="PARSING">GENERAL</SAP:Code>
<SAP:Stack>com.sap.aii.af.service.cpa.CPAObjectNotFoundException: Couldn't retrieve inbound binding for the given P/S/A values: FP=;TP=;FS=ED1CLNT290;TS=;AN=CustTrPowersellS_Out;ANS=urn:maines-net:OTC_079E:PowersellCustomerTerms; at com.sap.aii.af.service.cpa.impl.lookup.CommonLookup.getInboundBinding(CommonLookup.java:237) at com.sap.aii.af.service.cpa.impl.lookup.CommonLookup.getInboundBinding(CommonLookup.java:167) at com.sap.aii.af.service.cpa.InboundRuntimeLookup.<init>(InboundRuntimeLookup.java:88) at com.sap.aii.af.service.cpa.impl.lookup.AbstractLookupManager.getBinding(AbstractLookupManager.java:519) at com.sap.aii.adapter.soap.web.MessageServlet.getBinding(MessageServlet.java:875) at com.sap.aii.adapter.soap.web.MessageServlet.doPost(MessageServlet.java:439) at etc etc
Configuration should be fine because many scenarios are working. Can you please help me where could be the error?
Let me know if you need more info.
Regards,
N@v!n

Hi Naveen,
We saw your solution about this issue. We are also facing same issue. I wanted to know where we have to update scenario as simple scenario or integrated scenario.
And could you please tel me what is the main diff between in these two.
As we are are using PI 7.31 java stack so for this version what we have to use.
Thanks,
Shivdeep Kumar

FTP to ABAP Proxy Scenario - getting error CO_TXT_CHANNEL_PASSWORD_ERROR

We have transported PI and EP data from development server to respective production, every thing is running fine except the abap proxy scenarios i.e. PI reads file from ftp location and calls the abap proxy but we are getting following errors:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_CHANNEL_PASSWORD_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to read user password from communication channel of type Error when accessing the secure store (access ID = FD768D4A8772DB50E1000000AC10041E) Error while reading from the secure store: ERROR_UNKNOWN: Cannot find entry in secure store (SECSTORE,023)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Any solution?
Please note that I have searched and applied solutions given on SDN forums but didn't get any success. So I am looking for new suggestions.
Regards,
Jawed Ali

Jawed ,
Please test the HTTP destination of your receiver comm channel.
Which is the RFC connection to your R3 system.
Transaction SM59 and check the logon parameter for the connection you are using.
Regards,

ABAP Proxy To XI

Similar Messages

Maybe you are looking for