ABAP QUERY: F4 help

Hi,
I am using PNP LDB in sq03 for HR.
now i want F4 help for selection-screen.
I am selection AT SELECTION-SCREEN but it's not selected.
in which event i'll use the function module F4.
Thanks & Regrds,
Valla muthu.M

Please see the below code is the best example of passing the table values as F4 help values in the selection screen through the even of the report .....
REPORT Ztest_HELP .
TABLES : MARA.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS : P_MATNR(10) TYPE C.
SELECTION-SCREEN END OF BLOCK B1.
DATA : BEGIN OF ITAB OCCURS 0,
MATNR TYPE MATNR,
END OF ITAB.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_MATNR.
SELECT MATNR
FROM MARA
INTO TABLE ITAB
UP TO 10 ROWS.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'MATERIAL NUMBER'
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'P_MATNR'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = ITAB
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3.

There are number of function modules that can be used for the purpose, but these
can fullfill the task easily or combination of them.
" DYNP_VALUE_READ
" F4IF_FIELD_VALUE_REQUEST
" F4IF_INT_TABLE_VALUE_REQUEST
" POPUP_WITH_TABLE_DISPLAY
" DYNP_VALUE_READ
This function module is used to read values in the screen fields. Use of this
FM causes forced transfer of data from screen fields to ABAP fields.
There are 3 exporting parameters
DYNAME = program name = SY-CPROG
DYNUMB = Screen number = SY-DYNNR
TRANSLATE_TO_UPPER = 'X'
and one importing TABLE parameter
DYNPFIELDS = Table of TYPE DYNPREAD
The DYNPFIELDS parameter is used to pass internal table of type DYNPREAD
to this FM and the values read from the screen will be stored in this table.This
table consists of two fields:
FIELDNAME : Used to pass the name of screen field for which the value is to
be read.
FIELDVALUE : Used to read the value of the field in the screen.
reward points if it is usefull ...
Girish

Similar Messages

ABAP query (Search help)

One Standard search help is giving resutlts perfectly ok in user's login having 'SAP ALL' profile but same is giving different results in user's loginwho do not have 'SAP ALL' profile. Kindly suggest.
Thanx and regards,
Rajesh Vasudeva

Hi Rajesh,
The reason for this may be that the user is not given the complete authorization for one or more firld in that query.For example user may have authorization for onle one plant PT01 and hence the o/p of query shows only relative data,where as in SAP_ALL there will be all the plants say PT01,PT02,PT03...
You may contact the Basis person for clarification.
Reward points if useful
Bhavin P Shah

Steps for creating abap query

hi sap gurus,
can i steps for creating abap query
plz help me on this.
regards,
balaji.t
09990019711

Hi
Please check this link for a document on ABAP query. It explains the process step by step with screen shots..
http://www.auditware.co.uk/downloads/SAPQuery_step_thru.pdf
Thanks,
Ravi

Help in the ABAP query

Hi Friends,
I am having issue in the ABAP query in the HR report, i can able to change the column Heading in the report, but the same header is not coming in the layout details fields(after executing the ALV report we have layout options where we could not see the same header as in the coulmn heading)
pls help me to solve this issue,
Regards,
boobalan.v

Hi,
Once you have made some changes to the infoset/query, You need to adjust the infoset(SQ02) and then regenerate the query(SQ01)
>Menu->Query/Infoset->More functions->Adjust/Generate program.
Letme know if this is still not reflecting..
Reward if useful
Regards
Shiva

Hi need help in abap query

hello friends,
i am doing abap query,
i created the
user group in sq03
infoset in sq02
query in sq01
it looks ok,
but it is picking all the items from the table1,
i want it to pick only those data which satisfy one specific condition,
like
vkorg = 'A123' or 'B456'.
audat = anything after feb 04.
likie that.
can some one help.

Check with below Link :
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40bec8da-4cd8-2910-27a9-81f5ce10676c
Pls go through the below link.
http://www.sappoint.com/abap/ab4query.pdf
Thanks
Seshu

ABAP QUERY REPORT : please help me ASAP.

hi friends,
I need to change the existing custom abap query.
1) I need to add two more fields on selection screen. I have added using INFOSET and checked the input and output check boxes.
But the text of the one field should be different from standard tetx.
"Reference date" to be changed to "Dairy date".
I have changed in Infosets. updated text is displaying as "Dairy date" in the out put LIST, but standard text (Reference date) is appearing on the selection screen.
I need it to be displaed as "Dairy date"
2)The column "Dairy" date is adding as the last column in the list after executing the query. But I need it to be displayed at 8th column.
Please help me ASAP.

hi Eric,
Could you please explain in detail.
1)I HAVE CHANGED THE NAME IN iNFOSET, FIELD GROUP.
IT IS NOT REFLECTING IN SELECTION SCREEN. ONLY REFLECTING IN THE OUT PUT.
2) I have tried by changing the sort sequence number. but still it is displaying at the end of the columns.
please explain in detail.

Search help for field in ABAP Query

Hi Experts,
For a particular field in standard table the search help(F4) is not maintained in the table level, which is used in a ABAP query.
Is there any possibilities for user-defined Search help using InfoSet or Query?
Please help me in this regard.
Thanks in advance,
Balaganesh.

Hi Bala,
I understand your question better now. Since you mention standard selections I assume that your InfoSet is based on a logical database instead of a table join, direct read, or custom data retrieval program. You are correct that the AT SELECTION-SCREEN ON VALUE REQUEST logic I mentioned earlier will not work for the standard selections of a logical database. The system gives you an error when generating your InfoSet if you try to use the standard selection name (in ECC 5.0 at least). I've tried various tricks to attempt to get it to work, but so far no luck.
You could, of course, use a different logical database as your InfoSet basis (e.g. VAV has a matchcode on VBAK-VBELN) or create your own data retrieval program and change your InfoSet to use the custom program instead of a logical database. In the second case you wouldn't need to deal with standard selections at all. I understand that these solutions are probably not what you need and, in the case of the custom data retrieval program, would be more complex (it may not be worth it to write a custom program just to allow F4 help... or maybe it would be... just depends).
Please keep us updated if you find a way to do it. I'll also report back if I happen to discover a way.
Best Regards,
Jamie

F4 Help in ABAP QUERY

Hi,
Can we provide F4 help to fields in Dynamic selections in an ABAP Query?
Thanks
Chandra

Hi,
Can we provide F4 help to fields in Dynamic selections in an ABAP Query?
Thanks
Chandra

How to create an ABAP Query with OR logical expression in the select-where

Hi,
In trying to create an ABAP query with parameters. So it will select data where fields are equal to the parameters entered. The default logical expression is SELECT.. WHERE... AND.. However I want to have an OR logical expression instead of AND.. how can I attain this??
Please help me on this.. Points will be rewarded.
Thanks a lot.
Regards,
Question Man

Hi Bhupal, Shanthi, and Saipriya,
Thanks for your replies. But that didn't answer my question.
Bhupal,
You cannot just replace AND with OR in an ABAP QUERY. ABAP QUERY is a self generated SAP code. You'll just declare the tables, input parameters and output fields to be displayed and it will create a SAP standard code. If you'll try to change the code and replace the AND with OR in the SAP standard code, the system will require you to enter access key/object key for that particular query.
Shanthi,
Yes, that is exactly what need to have. I need to retireve DATA whenever one of the conditions was satisfied.
Saipriya,
Like what I have said, this is a standard SAP code so we can't do your suggestion.
I have already tried to insert a code in the ABAP query (there's a part there wherein you can have extra code) but that didn't work. Can anybody help me on this.
Thanks a lot.
Points will be rewarded.
Regards,
Question Man

Logical database of ABAP query

Hi,
Can anybody please let me know what is the Logical database for ETXDCI, ETXDCH & ETXDCJ (Tax tables) with any sales document tables? I need to develop one ABAP query for the users.
I am a Functional person so I would like to know Can anybody please let me know how I can find out the Logical database?
Your time and help will be really appreciate.
Thanks & Regards,
Niki Shah.

Try the BRF logical database.
I found it by searching in which programs the tables were used.
It show program SAPDBBRF which is the program for logical database BRF.
Kind regards,
Arthur Parisius

Pnp- logical db in abap query

hi.
i need to create an ABAP/sap query. when i created the InfoSet i used logical db-pnp.
if i want to get only the employees which entered my organization during the last month where should i add the ABAP code, under which section => extras -> code. i have there several options - data, initialization, at selection-screen output etc, what to choose??????????
thanks,
Ami

Hi
Welcome to SDN forum
query has got some limitatins compared to Reports which we write using SE38
these queries are user specific and client specific and can't be transportable and you can't write your own code as you wish like reports
see the doc
http://help.sap.com/saphelp_46c/helpdata/en/35/26b413afab52b9e10000009b38f974/content.htm
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Introduction.asp
Step-by-step guide for creating ABAP query
http://www.sappoint.com/abap/ab4query.pdf
ABAP query is mostly used by functional consultants.
SAP Query
Purpose
The SAP Query application is used to create lists not already contained in the SAP standard system. It has been designed for users with little or no knowledge of the SAP programming language ABAP. SAP Query offers users a broad range of ways to define reporting programs and create different types of reports such as basic lists, statistics, and ranked lists.
Features
SAP Query's range of functions corresponds to the classical reporting functions available in the system. Requirements in this area such as list, statistic, or ranked list creation can be met using queries.
All the data required by users for their lists can be selected from any SAP table created by the customer.
To define a report, you first have to enter individual texts, such as titles, and select the fields and options which determine the report layout. Then you can edit list display in WYSIWYG mode whenever you want using drag and drop and the other toolbox functions available.
ABAP Query, as far as I Believe, is the use of select statements in the ABAP Programming. This needs a knowledge of Open SQL commands like Select,UPdtae, Modify etc. This has to be done only by someone who has a little bit of ABAP experience.
To sum up, SAP queries are readymade programs given by SAP, which the user can use making slight modification like the slection texts, the tables from which the data is to be retrieved and the format in which the data is to be displayed.ABAP queries become imperative when there is no such SAP query existing and also when there is a lot of customizing involved to use a SAP Query directly
use either SQ02 ans SQ01
or SQVI tr code
for more information please go thru this url:
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Create_The_Query.asp
http://goldenink.com/abap/sap_query.html
Please check this PDF document (starting page 352) perhaps it will help u.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVQUE/BCSRVQUE.pdf
check the below link will be helpful for u
Tutorial on SQVI
once you create query system generates a report starting with AQZZ/SAPQUERY/ABAGENCY2======= assing this report to tr code for the same
Regards
Anji

Wrong sequence in selection screen generated by ABAP Query

Hi,
I am developing a query to display the data in the view.
My query has 8 selection fields totally.
As part of my requirement I have added selection parameter in the
selections tab of the infoset and maintained the sequence as 9.
Inspite of maintaining the sequence number as 9 in the infoset, It is
appearing first in the selection screen of the query.
I tried putting different numbers in the sequence number, but even it
is appearing first in the selection screen.
Can you please let me know how to display the selections declared in
the infoset as per the sequence required.
Thanks,
Madhuri.

Actually what happen when you declare your own fields in ABAP query . you have to care about the sequence . As an example if youre selecting lets say state name , you have two variables
1-state
2- land
for state you have to select land first , if your state is first and land is 2nd it gave you the error of sequence .
Because you have to get data in land first in order to get state specific to the land .
it should be
1-Land
2-State
Just see the your fields , Im sure youre missing that .
You can also see the NO ( field ) in Query ( Sq03 ) . where you can define the seqence on selection.
hope thisll help you .
Pl...Award the points .
Thanks
Saquib
Message was edited by: Saquib Khan

Short Dump While selecting Variant for ABAP query

Hi,
ABAP query is going to short dump (CONNE_IMPORT_WRONG_COMP_LENG) while selecting a Variant. If i create and use variant then i am able to see Output of Variant.But not able to use Earlier created variants .
I think some mismatch between variant values and selection screen fields.Can anyone tell me how to rectify this ?
I am not able to debug the code as dump is coming in a System program(RSDBSPVD).Can anyone tell me which database table i can use to get values of the Variant.
Thanks in Advance.
Nirmala K

Hi nirmala,
chk the links:
http://help.sap.com/saphelp_webas620/helpdata/en/c0/980398e58611d194cc00a0c94260a5/content.htm
http://help.sap.com/saphelp_webas620/helpdata/en/c0/9803a7e58611d194cc00a0c94260a5/content.htm
regards,
keerthi.

Getting error while assigning ABAP Query to Tr.Code

Hi Guys,
There is a problem iam facing with ABAP query while transporting which need to solved asap. It will very greatfull if u guys can resolve this problem.
My problem is, I created one ABAP Query with Name ASSETOVERVIEW. I had transported this even, now when iam going to assign it to one transaction code with se93 lets say ZAOR. I need to give its description and program name in se93 right. now my question is what is program name i need to give in se93. Bcoz in SQ01 where i created the query, there is no name as 'program name' rather there is 'Name' in that we will create the query name i.e, ASSETOVERVIEW. In se93 u give tr.code and when u see down there will be radiobuttons in 'start object',in that i had checked program and selection screen (report transaction) is this right button i had checked or any other i need to check?. I had assigned this name i.e,ASSETOVERVIEW and development class and then when i check the name for syntax check its giving "'ASSETOVERVIEW' does not exist". I don't understand what program name i need to give.
If u guys can help me out with this problem it will be very much appreciable and definetly can get the reward points.
Thanks for as usual help in advance.
Regards.

Hi omer,
1. Just run the query.
2. one selection screen will come
3. then using SYSTEM---->STATUS, (from menu)
look for the program name
4. the program name will be something wired foramt.
/asdfasdf/asdfdas etc.
5. Give that name in se93.
regards,
amit m.

Creation of local field in ABAP Query

Hi
Please let me know how to create a local field in ABAP query. I am finding the option inactive in SQ01.
Regards
Priyadarshini

hi priya,
     *__Adding u201CLocal Fieldu201D (user defined field) in SAP Query_ :
There is also facility to add the user defined fields in SAP query output. Also we can provide calculation formula for calculating values for this user defined field.
Calculation formula consists of standard fields from standard SAP tables. So the values fetched for particular standard SAP fields from standard SAP tables get calculated as per the calculation formula defined for the user defined field and displays the value accordingly.
To do this first go to change mode for Query which automatically takes you to screen shown below and click on icon   , as below :
Then further screen will appears. So select the Field group and again click on the same icon button   .
Then switch on the Short names for the fields and give the short names to fields which we need to use in Calculation formula.
Give the short names and then created u201CLocal Fieldu201D, as shown in below screen shot. Also Short names are given to fields, which can be used further for calculation.
Defining Local Field u201CREM_QTYu201D along with its field type and Calculation formula.
In this case we have
defined field type for new
field as similar to
ORD_QTY and
Calculation formula is
defined.
Also its possible to have Conditional logic for Local field by putting Condition in u201CConditionu201D line.
Now activate this newly added Local field for coming it in output screen. To do the same again go to u201CBasic Listu201D and activate the Local Field as shown below :
i think this will help u
regards,
sindhu.

ABAP QUERY: F4 help

Similar Messages

Maybe you are looking for