ABAP Query - output entries repeating
Hi Friends,
I have created an ABAP query but the output entries are repeating. I tried different joins but dint work. I found out the internal table in the query report in SE38 and used the following command in the Infoset code (SQ02):
DELETE ADJACENT DUPLICATES FROM %G00.
I am not able to generate the infoset without declaring the internal table %G00. Hence I declared it in the DATA section of the infoset code. After this when I go to the query (SQ01) and run it, the system is throwing an ABAP dump which says %G00 has been declared twice.
Can someone plese help me out in getting this resolved. I've been stuck with this for almost a week now.
Thanks in advance,
Dikshitha
Hello Dikshitha,
In the data section of the infoset:
Deletion of duplicates lines
constants : wk_table(6) VALUE '%G00[]'.
FIELD-SYMBOLS : <t1> TYPE table.
In the END OF SELECTION (AFTER LIST):
the other code lines.
I checked my infoset, I never declare %G00[] as it is automatically generated. Perhaps you forgot to remove some of your previous code lines? Have you check everywhere (code related to additional fields, code tab, data read prog tab?).
After the modification, try to create a new query from scratch related to this infoset. Perhaps it's a "refresh" problem.
Olivier
Similar Messages
-
hi all
Is it possible to give a page break in ABAP query output. I want my new order number to be printed on a new page.
Any pointers will be appreciated.
Thanks.Hi,
U can use AT NEW event.
Ex:
AT NEW orderno.
NEW PAGE.
endat.
Regards,
S.Nehru. -
Hide/Delete lines from ABAP Query output when Quantity is 0
Hi all,
I'm changing an existing abap query. My requirement is to delete the rows from the report output where qantity = 0.
I tried the following ways.
1. In SQ01, select the quantity field and check the checkbox for "Display only field <> 0", but this didnt worked as it will
supress the zero from display.
2. I tried to write code in the Infoset SQ02->Edit->Code. I wrote the following code "CHECK vbep-wmeng IS NOT INITIAL".
Here the problem is, the code is not executing in the test client. When I open the Infoset in test(i mean development test)
client the code is there, but when i execute the program its not working. I tried using "BREAK-POINT", program executions
does not stop at the break point. There is existing code in the event "START-OF-SELECTION", this code I'm able to see in the
query program opened through SE38. I edited the existing code and kept a break point in between, and now checked in the
program in SE38, but the changes are not reflected. I'm able to see old code only(even after save n generate).
3. Gave search in SCN, google etc.
Please note.
1. I'm not using any Logical Database in the Infoset. Its a simple join of 4 tables.
2. Query is created in the Global Area (cross client) not client specific.
Can anybody tell me what could be the problem and how can Over the above issues and achive the requirement.
Thanks in advance.
Edited by: Mr A on Feb 25, 2010 1:39 AMDear Mr A,
Can i know how did u solve the issue even i'm facing the same problem.
Regards,
Karan Bhasin -
ABAP Query output to XML file using Business connector
Hi All,
I would request your help on to know, how can I read the output of ABAP query executed in SAP system via Business connector and then generate a XML file.
Also the existing business connector system, generates the XML file in encoding iso-8859-1. Where as customer wants the output XML file in encoding windows-1252.
Please help with your valuable ideas.
Thanks,Hello,
possible solution:
1. create a remote function module (FM) in SAP which returns your needed data
2. create outbound map in BC for this FM
3. call this FM from BC in a flow
3. extract the result to XML (e.g. with service recordToDocument)
CSY -
ABAP query output not showing all output fields
I added a new field group in an existing query and marked them to display in the output list. When I test the output from SQ01 -> InfoSer Query, the output is what I expect. However, if I execute the query itself, it does not show the additional fields I just created.
I notice that in the Basic List layout design, the new fields are on a new line and not appended to the same line as the output fields before I did the modifications. I already tried to manipulate the output length and positions, but it didn't help. I turned on the ruler to drag the fields in the desired positions, sometimes it works but not for all the fields. Can someone help me please?I figured it out already. The maximum width for the report output is 255 only. Switching from graphical query painter, I got the error that some fields were overlapping. Then I recalculated the starting positions of the fields and adjusted their lengths.
-
Appearing Duplicate column in ABAP QUERY output list.
Hi ,
I have created a report using SAP QUERY having issue on output display showing duplicate columns name Weight Unit (LIKP-GEWEI ) and rest of field area coming fine .
Kindly help to solve the issue .
Thanks .Hi,
The currency and quantity units get automatically displayed based on the currency and quantity fields on the output list. However you can restrict it by selecting those fields and choose No currency fields before or after and apply.
How to do?
1. Goto SQ01, provide your query name and select "Infoset Query".
2. Now choose the currency/quantity fields on the lower bottom of window.
3. Right click on the field and traverse to Unit->Do not Output.
Hope this helps!
Br,
Maju -
Hi
I have a doubt regarding ABAP queries . I need to pass the output of an ABAP query to another program . For this i want to know if the output of an ABAP query is stored in some kind of internal table or some other logic is used in that .
Is it possible to send the ABAP query output to a memory structure.
Helpful answers will be suitably rewarded.
Thanks.Hi,
program 1:
from select query get the output to internal table
so that with export and import u can attain this
EXPORT t_sflight1 TO MEMORY ID 'SFLI'.
SUBMIT pgm2 AND RETURN.
program2:
IMPORT t_sflight1 FROM MEMORY ID 'SFLI'.
LOOP AT t_sflight1 INTO fs_string1.
where in use the same internal table in both reports
Reward Points If helpful.
Regards,
priya. -
Query: How to add new fields in ABAP query?
Hi All,
Can any one tell me how to add new fields in the ABAP query output?
We have to add the new fields using query design or we have
to add those in the background program(automatically generated behind query) by selecting new fields in the code?What kind of report? Usually, you have to add the field in the table declaration and then also in the SQL query. After that, include the field in what kind of report you are using.
-
Exporting Report Result - abap query
I've Created Abap Query & output is coming
like
invoive no. cust name
700001 xyz
700001 xyz
700001 xyz
700001 xyz After sorting based on invoice number & cust name o/p is as below
invoive no. cust name
700001 xyz
i want to export this in same format to excel file .
But when i'm trying to do so it's coming like this itself .
invoive no. cust name
700001 xyz
700001 xyz
700001 xyz
700001 xyzHi,
To the best of my understanding the o/p that will be moved to excel will always be the one that you get on running the query the first time, processing done after that will not move to excel.
Regards,
Saurabh -
How to make output of ABAp query interactive(drill down)..?
Hi All,
I have developed one ABAP query which shows the output in which there is a coloumm 'order number'.
I want to make this coloumn interactive ,that means after double clicking on any row of this colomn ,it should go to transaction KO02.
Where do i have to write the code in ABAP query ?
I am very new to ABAP query..this is the first query i have deloped till now.
points will be rewarded.
Thnks in advance.
Regards,
Sanjay.<b>The below sample code is one such example of Drill down reporting...
Make the necessary modifications, change the statement CALL TRANSACTION to whatever you want to CALL. Proceed further.</b>
*"Table declarations...................................................
TABLES:
EKKO, " Purchasing Document Header
CDHDR, " Change document header
SSCRFIELDS. " Fields on selection screens
*"Selection screen elements............................................
SELECT-OPTIONS:
S_EBELN FOR EKKO-EBELN, " Purchasing Document Number
S_LIFNR FOR EKKO-LIFNR, " Vendor's account number
S_EKGRP FOR EKKO-EKGRP, " Purchasing group
S_BEDAT FOR EKKO-BEDAT, " Purchasing Document Date
S_UDATE FOR CDHDR-UDATE. " Creation date of the change
" document
*" Data declarations...................................................
Field String to hold Purchase Document Number *
DATA:
BEGIN OF FS_EBELN,
EBELN(90) TYPE C, " Purchase Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created
" the Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
END OF FS_EBELN,
Field String to hold Purchase Document Header *
BEGIN OF FS_EKKO,
EBELN TYPE EKKO-EBELN, " Purchasing Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created the
" Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
END OF FS_EKKO,
Field String to hold Account Number and name of the Vendor *
BEGIN OF FS_LFA1,
LIFNR TYPE LFA1-LIFNR, " Account Number of Vendor
NAME1 TYPE LFA1-NAME1, " Name1
END OF FS_LFA1,
Field String to hold Change date and the name of the user *
BEGIN OF FS_CDHDR,
OBJECTCLAS TYPE CDHDR-OBJECTCLAS, " Object Class
OBJECTID TYPE CDHDR-OBJECTID, " Object value
CHANGENR TYPE CDHDR-CHANGENR, " Document change number
USERNAME TYPE CDHDR-USERNAME, " User name
UDATE TYPE CDHDR-UDATE, " Creation date of the change
" document
END OF FS_CDHDR,
Field String to hold Change document items *
BEGIN OF FS_CDPOS,
OBJECTCLAS TYPE CDPOS-OBJECTCLAS," Object class
OBJECTID(10) TYPE C, " Object Value
CHANGENR TYPE CDPOS-CHANGENR, " Document change number
TABNAME TYPE CDPOS-TABNAME, " Table Name
FNAME TYPE CDPOS-FNAME, " Field Name
VALUE_NEW TYPE CDPOS-VALUE_NEW, " New contents of changed field
VALUE_OLD TYPE CDPOS-VALUE_OLD, " Old contents of changed field
END OF FS_CDPOS,
Field String to hold Date Element Name *
BEGIN OF FS_DATAELE,
TABNAME TYPE DD03L-TABNAME, " Table Name
FIELDNAME TYPE DD03L-FIELDNAME, " Field Name
ROLLNAME TYPE DD03L-ROLLNAME, " Data element (semantic domain)
END OF FS_DATAELE,
Field String to hold Short Text of the Date Element *
BEGIN OF FS_TEXT,
ROLLNAME TYPE DD04T-ROLLNAME, " Data element (semantic domain)
DDTEXT TYPE DD04T-DDTEXT, " Short Text Describing R/3
" Repository Objects
END OF FS_TEXT,
Field String to hold data to be displayed on the ALV grid *
BEGIN OF FS_OUTTAB,
EBELN TYPE EKKO-EBELN, " Purchasing Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created the
" Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
WERKS TYPE LFA1-WERKS, " Plant
NAME1 TYPE LFA1-NAME1, " Name1
USERNAME TYPE CDHDR-USERNAME, " User name
UDATE TYPE CDHDR-UDATE, " Creation date of the change
" document
DDTEXT TYPE DD04T-DDTEXT, " Short Text Describing R/3
" Repository Objects
VALUE_NEW TYPE CDPOS-VALUE_NEW, " New contents of changed field
VALUE_OLD TYPE CDPOS-VALUE_OLD, " Old contents of changed field
END OF FS_OUTTAB,
Internal table to hold Purchase Document Number *
T_EBELN LIKE STANDARD TABLE
OF FS_EBELN,
Internal table to hold Purchase Document Header *
T_EKKO LIKE STANDARD TABLE
OF FS_EKKO,
Temp Internal table to hold Purchase Document Header *
T_EKKO_TEMP LIKE STANDARD TABLE
OF FS_EKKO,
Internal table to hold Account number and Name of the Vendor *
T_LFA1 LIKE STANDARD TABLE
OF FS_LFA1,
Internal Table to hold Change date and the name of the user *
T_CDHDR LIKE STANDARD TABLE
OF FS_CDHDR,
Internal Table to hold Change document items *
T_CDPOS LIKE STANDARD TABLE
OF FS_CDPOS,
Temp. Internal Table to hold Change document items *
T_CDPOS_TEMP LIKE STANDARD TABLE
OF FS_CDPOS,
Internal Table to hold Data Element Name *
T_DATAELE LIKE STANDARD TABLE
OF FS_DATAELE,
Temp. Internal Table to hold Data Element Name *
T_DATAELE_TEMP LIKE STANDARD TABLE
OF FS_DATAELE,
Internal Table to hold Short Text of the Date Element *
T_TEXT LIKE STANDARD TABLE
OF FS_TEXT,
Internal Table to hold data to be displayed on the ALV grid *
T_OUTTAB LIKE STANDARD TABLE
OF FS_OUTTAB.
C L A S S D E F I N I T I O N *
CLASS LCL_EVENT_HANDLER DEFINITION DEFERRED.
*" Data declarations...................................................
Work variables *
DATA:
W_EBELN TYPE EKKO-EBELN, " Purchasing Document Number
W_LIFNR TYPE EKKO-LIFNR, " Vendor's account number
W_EKGRP TYPE EKKO-EKGRP, " Purchasing group
W_VALUE TYPE EKKO-EBELN, " Reflected Value
W_SPACE VALUE ' ', " Space
W_FLAG TYPE I, " Flag Variable
W_VARIANT TYPE DISVARIANT, " Variant
*--- ALV Grid
W_GRID TYPE REF TO CL_GUI_ALV_GRID,
*--- Event Handler
W_EVENT_CLICK TYPE REF TO LCL_EVENT_HANDLER,
*--- Field catalog table
T_FIELDCAT TYPE LVC_T_FCAT.
AT SELECTION-SCREEN EVENT *
AT SELECTION-SCREEN ON S_EBELN.
Subroutine to validate Purchase Document Number.
PERFORM VALIDATE_PD_NUM.
AT SELECTION-SCREEN ON S_LIFNR.
Subroutine to validate Vendor Number.
PERFORM VALIDATE_VEN_NUM.
AT SELECTION-SCREEN ON S_EKGRP.
Subroutine to validate Purchase Group.
PERFORM VALIDATE_PUR_GRP.
START-OF-SELECTION EVENT *
START-OF-SELECTION.
Subroutine to select all Purchase orders.
PERFORM SELECT_PO.
CHECK W_FLAG EQ 0.
Subroutine to select Object values.
PERFORM SELECT_OBJ_ID.
CHECK W_FLAG EQ 0.
Subroutine to select Changed values.
PERFORM SELECT_CHANGED_VALUE.
CHECK W_FLAG EQ 0.
Subroutine to Select Purchase Orders.
PERFORM SELECT_PUR_DOC.
Subroutine to select Vendor Details.
PERFORM SELECT_VENDOR.
Subroutine to select Text for the Changed values.
PERFORM DESCRIPTION.
END-OF-SELECTION EVENT *
END-OF-SELECTION.
IF NOT T_EKKO IS INITIAL.
Subroutine to populate the Output Table.
PERFORM FILL_OUTTAB.
Subroutine to build Field Catalog.
PERFORM PREPARE_FIELD_CATALOG CHANGING T_FIELDCAT.
CALL SCREEN 100.
ENDIF. " IF NOT T_EKKO...
CLASS LCL_EVENT_HANDLER DEFINITION
Defining Class which handles events
CLASS LCL_EVENT_HANDLER DEFINITION .
PUBLIC SECTION .
METHODS:
HANDLE_HOTSPOT_CLICK
FOR EVENT HOTSPOT_CLICK OF CL_GUI_ALV_GRID
IMPORTING E_ROW_ID E_COLUMN_ID.
ENDCLASS. " LCL_EVENT_HANDLER DEFINITION
CLASS LCL_EVENT_HANDLER IMPLEMENTATION
Implementing the Class which can handle events
CLASS LCL_EVENT_HANDLER IMPLEMENTATION .
*---Handle Double Click
METHOD HANDLE_HOTSPOT_CLICK .
Subroutine to get the HotSpot Cell information.
PERFORM GET_CELL_INFO.
SET PARAMETER ID 'BES' FIELD W_VALUE.
CALL TRANSACTION 'ME23N'.
ENDMETHOD. " HANDLE_HOTSPOT_CLICK
ENDCLASS. " LCL_EVENT_HANDLER
*& Module STATUS_0100 OUTPUT
PBO Event
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'OOPS'.
SET TITLEBAR 'TIT'.
Subroutine to fill the Variant Structure
PERFORM FILL_VARIANT.
IF W_GRID IS INITIAL.
CREATE OBJECT W_GRID
EXPORTING
I_SHELLSTYLE = 0
I_LIFETIME =
I_PARENT = CL_GUI_CONTAINER=>SCREEN0
I_APPL_EVENTS =
I_PARENTDBG =
I_APPLOGPARENT =
I_GRAPHICSPARENT =
I_NAME =
I_FCAT_COMPLETE = SPACE
EXCEPTIONS
ERROR_CNTL_CREATE = 1
ERROR_CNTL_INIT = 2
ERROR_CNTL_LINK = 3
ERROR_DP_CREATE = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. " IF SY-SUBRC <> 0
CALL METHOD W_GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT = W_VARIANT
I_SAVE = 'A'
I_DEFAULT = 'X'
IS_LAYOUT =
IS_PRINT =
IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
IR_SALV_ADAPTER =
CHANGING
IT_OUTTAB = T_OUTTAB
IT_FIELDCATALOG = T_FIELDCAT
IT_SORT =
IT_FILTER =
EXCEPTIONS
INVALID_PARAMETER_COMBINATION = 1
PROGRAM_ERROR = 2
TOO_MANY_LINES = 3
OTHERS = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. " IF SY-SUBRC <> 0.
ENDIF. " IF W_GRID IS INITIAL
CREATE OBJECT W_EVENT_CLICK.
SET HANDLER W_EVENT_CLICK->HANDLE_HOTSPOT_CLICK FOR W_GRID.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
PAI Event
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'EXIT'.
LEAVE PROGRAM.
WHEN 'CANCEL'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form PREPARE_FIELD_CATALOG
Subroutine to build the Field catalog
<--P_T_FIELDCAT Field Catalog Table
FORM PREPARE_FIELD_CATALOG CHANGING PT_FIELDCAT TYPE LVC_T_FCAT .
DATA LS_FCAT TYPE LVC_S_FCAT.
Purchasing group...
LS_FCAT-FIELDNAME = 'EKGRP'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Purchasing Document Number...
LS_FCAT-FIELDNAME = 'EBELN'.
LS_FCAT-REF_TABLE = 'EKKO' .
LS_FCAT-EMPHASIZE = 'C411'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-HOTSPOT = 'X'.
APPEND LS_FCAT TO PT_FIELDCAT .
CLEAR LS_FCAT .
Name of Person who Created the Object...
LS_FCAT-FIELDNAME = 'ERNAM'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-OUTPUTLEN = '15' .
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Purchasing Document Date...
LS_FCAT-FIELDNAME = 'BEDAT'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Vendor's account number...
LS_FCAT-FIELDNAME = 'LIFNR'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Account Number of Vendor or Creditor...
LS_FCAT-FIELDNAME = 'NAME1'.
LS_FCAT-REF_TABLE = 'LFA1'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Vendor Name'(001).
LS_FCAT-SELTEXT = 'Vendor Name'(001).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Creation date of the change document...
LS_FCAT-FIELDNAME = 'UDATE'.
LS_FCAT-REF_TABLE = 'CDHDR'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Change Date'(002).
LS_FCAT-SELTEXT = 'Change Date'(002).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
User name of the person responsible in change document...
LS_FCAT-FIELDNAME = 'USERNAME'.
LS_FCAT-REF_TABLE = 'CDHDR'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Modified by'(003).
LS_FCAT-SELTEXT = 'Modified by'(003).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Short Text Describing R/3 Repository Objects...
LS_FCAT-FIELDNAME = 'DDTEXT'.
LS_FCAT-REF_TABLE = 'DD04T'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '15'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Old contents of changed field...
LS_FCAT-FIELDNAME = 'VALUE_OLD'.
LS_FCAT-REF_TABLE = 'CDPOS'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '12'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
New contents of changed field...
LS_FCAT-FIELDNAME = 'VALUE_NEW'.
LS_FCAT-REF_TABLE = 'CDPOS'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '12'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
ENDFORM. " PREPARE_FIELD_CATALOG
*& Form SELECT_PO
Subroutine to select all the Purchase Orders
There are no interface parameters to be passed to this subroutine.
FORM SELECT_PO .
SELECT EBELN " Purchasing Document Number
ERNAM " Name of Person who Created
" the Object
LIFNR " Vendor's account number
EKGRP " Purchasing group
BEDAT " Purchasing Document Date
FROM EKKO
PACKAGE SIZE 10000
APPENDING TABLE T_EBELN
WHERE EBELN IN S_EBELN
AND BEDAT IN S_BEDAT.
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S401(M8).
ENDIF. " IF SY-SUBRC NE 0
ENDFORM. " SELECT_PO
*& Form SELECT_OBJ_ID
Subroutine to select Object ID
There are no interface parameters to be passed to this subroutine.
FORM SELECT_OBJ_ID .
IF NOT T_EBELN IS INITIAL.
SELECT OBJECTCLAS " Object Class
OBJECTID " Object value
CHANGENR " Document change number
USERNAME " User name
UDATE " Creation date
FROM CDHDR
INTO TABLE T_CDHDR
FOR ALL ENTRIES IN T_EBELN
WHERE OBJECTID EQ T_EBELN-EBELN
AND UDATE IN S_UDATE
AND TCODE IN ('ME21N','ME22N','ME23N').
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S833(M8) WITH 'Header Not Found'(031).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_EBELN IS INITIAL
ENDFORM. " SELECT_OBJ_ID
*& Form SELECT_CHANGED_VALUE
Subroutine to select Changed Values
There are no interface parameters to be passed to this subroutine.
FORM SELECT_CHANGED_VALUE .
IF NOT T_CDHDR IS INITIAL.
SELECT OBJECTCLAS " Object class
OBJECTID " Object value
CHANGENR " Document change number
TABNAME " Table Name
FNAME " Field Name
VALUE_NEW " New contents of changed field
VALUE_OLD " Old contents of changed field
FROM CDPOS
PACKAGE SIZE 10000
APPENDING TABLE T_CDPOS
FOR ALL ENTRIES IN T_CDHDR
WHERE OBJECTCLAS EQ T_CDHDR-OBJECTCLAS
AND OBJECTID EQ T_CDHDR-OBJECTID
AND CHANGENR EQ T_CDHDR-CHANGENR.
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S833(M8) WITH 'Item Not Found'(032).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_CDHDR IS INITIAL
T_CDPOS_TEMP[] = T_CDPOS[].
ENDFORM. " SELECT_CHANGED_VALUE
*& Form SELECT_PUR_DOC
Subroutine to select Purchase Order Details
There are no interface parameters to be passed to this subroutine.
FORM SELECT_PUR_DOC .
IF NOT T_CDPOS IS INITIAL.
SORT T_EBELN BY EBELN.
LOOP AT T_CDPOS INTO FS_CDPOS.
READ TABLE T_EBELN INTO FS_EBELN WITH KEY EBELN =
FS_CDPOS-OBJECTID BINARY SEARCH.
IF SY-SUBRC NE 0.
DELETE TABLE T_EBELN FROM FS_EBELN.
ENDIF. " IF SY-SUBRC NE 0.
ENDLOOP. " LOOP AT T_CDPOS...
LOOP AT T_EBELN INTO FS_EBELN.
MOVE FS_EBELN-EBELN TO FS_EKKO-EBELN.
MOVE FS_EBELN-ERNAM TO FS_EKKO-ERNAM.
MOVE FS_EBELN-LIFNR TO FS_EKKO-LIFNR.
MOVE FS_EBELN-EKGRP TO FS_EKKO-EKGRP.
MOVE FS_EBELN-BEDAT TO FS_EKKO-BEDAT.
APPEND FS_EKKO TO T_EKKO.
ENDLOOP. " LOOP AT T_EBELN...
T_EKKO_TEMP[] = T_EKKO[].
ENDIF. " IF NOT T_CDPOS IS INITIAL
ENDFORM. " SELECT_PUR_DOC
*& Form SELECT_VENDOR
Subroutine to select Vendor details
There are no interface parameters to be passed to this subroutine.
FORM SELECT_VENDOR .
IF NOT T_EKKO IS INITIAL.
SORT T_EKKO_TEMP BY LIFNR.
DELETE ADJACENT DUPLICATES FROM T_EKKO_TEMP COMPARING LIFNR.
SELECT LIFNR " Account Number of Vendor or
" Creditor
NAME1 " Name 1
FROM LFA1
INTO TABLE T_LFA1
FOR ALL ENTRIES IN T_EKKO_TEMP
WHERE LIFNR EQ T_EKKO_TEMP-LIFNR.
IF SY-SUBRC NE 0.
MESSAGE S002(M8) WITH 'Master Details'(033).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_EKKO IS INITIAL
ENDFORM. " SELECT_VENDOR
*& Form DESCRIPTION
Subroutine to get the description
There are no interface parameters to be passed to this subroutine.
FORM DESCRIPTION .
IF NOT T_CDPOS IS INITIAL.
SORT T_CDPOS_TEMP BY TABNAME FNAME.
DELETE ADJACENT DUPLICATES FROM T_CDPOS_TEMP COMPARING TABNAME FNAME
SELECT TABNAME " Table Name
FIELDNAME " Field Name
ROLLNAME " Data element
FROM DD03L
INTO TABLE T_DATAELE
FOR ALL ENTRIES IN T_CDPOS_TEMP
WHERE TABNAME EQ T_CDPOS_TEMP-TABNAME
AND FIELDNAME EQ T_CDPOS_TEMP-FNAME.
IF NOT T_DATAELE IS INITIAL.
T_DATAELE_TEMP[] = T_DATAELE[].
SORT T_DATAELE_TEMP BY ROLLNAME.
DELETE ADJACENT DUPLICATES FROM T_DATAELE_TEMP COMPARING ROLLNAME.
SELECT ROLLNAME " Data element
DDTEXT " Short Text Describing R/3
" Repository Objects
FROM DD04T
INTO TABLE T_TEXT
FOR ALL ENTRIES IN T_DATAELE_TEMP
WHERE ROLLNAME EQ T_DATAELE_TEMP-ROLLNAME
AND DDLANGUAGE EQ SY-LANGU.
IF SY-SUBRC NE 0.
EXIT.
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_DATAELE IS INITIAL.
ENDIF. " IF NOT T_CDPOS IS INITIAL.
ENDFORM. " DESCRIPTION
*& Form FILL_OUTTAB
Subroutine to populate the Outtab
There are no interface parameters to be passed to this subroutine.
FORM FILL_OUTTAB .
SORT T_CDHDR BY OBJECTCLAS OBJECTID CHANGENR.
SORT T_EKKO BY EBELN.
SORT T_LFA1 BY LIFNR.
SORT T_DATAELE BY TABNAME FIELDNAME.
SORT T_TEXT BY ROLLNAME.
LOOP AT T_CDPOS INTO FS_CDPOS.
READ TABLE T_CDHDR INTO FS_CDHDR WITH KEY
OBJECTCLAS = FS_CDPOS-OBJECTCLAS
OBJECTID = FS_CDPOS-OBJECTID
CHANGENR = FS_CDPOS-CHANGENR
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_CDHDR-USERNAME TO FS_OUTTAB-USERNAME.
MOVE FS_CDHDR-UDATE TO FS_OUTTAB-UDATE.
READ TABLE T_EKKO INTO FS_EKKO WITH KEY
EBELN = FS_CDHDR-OBJECTID
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_EKKO-EBELN TO FS_OUTTAB-EBELN.
MOVE FS_EKKO-ERNAM TO FS_OUTTAB-ERNAM.
MOVE FS_EKKO-LIFNR TO FS_OUTTAB-LIFNR.
MOVE FS_EKKO-EKGRP TO FS_OUTTAB-EKGRP.
MOVE FS_EKKO-BEDAT TO FS_OUTTAB-BEDAT.
READ TABLE T_LFA1 INTO FS_LFA1 WITH KEY
LIFNR = FS_EKKO-LIFNR
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_LFA1-NAME1 TO FS_OUTTAB-NAME1.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
MOVE FS_CDPOS-VALUE_NEW TO FS_OUTTAB-VALUE_NEW.
MOVE FS_CDPOS-VALUE_OLD TO FS_OUTTAB-VALUE_OLD.
READ TABLE T_DATAELE INTO FS_DATAELE WITH KEY
TABNAME = FS_CDPOS-TABNAME
FIELDNAME = FS_CDPOS-FNAME
BINARY SEARCH.
IF SY-SUBRC EQ 0.
READ TABLE T_TEXT INTO FS_TEXT WITH KEY
ROLLNAME = FS_DATAELE-ROLLNAME
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_TEXT-DDTEXT TO FS_OUTTAB-DDTEXT.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
APPEND FS_OUTTAB TO T_OUTTAB.
CLEAR FS_OUTTAB.
ENDLOOP.
ENDFORM. " FILL_OUTTAB
*& Form GET_CELL_INFO
Subroutine to get the Cell Information
--> W_VALUE Holds the value of Hotspot clicked
FORM GET_CELL_INFO .
CALL METHOD W_GRID->GET_CURRENT_CELL
IMPORTING
E_ROW =
E_VALUE = W_VALUE
E_COL =
ES_ROW_ID =
ES_COL_ID =
ES_ROW_NO =
ENDFORM. " GET_CELL_INFO
*& Form VALIDATE_PD_NUM
Subroutine to validate Purchase Document Number
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_PD_NUM .
IF NOT S_EBELN[] IS INITIAL.
SELECT EBELN " Purchase Document Number
FROM EKKO
INTO W_EBELN
UP TO 1 ROWS
WHERE EBELN IN S_EBELN.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E717(M8).
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_EBELN[]...
ENDFORM. " VALIDATE_PD_NUM
*& Form VALIDATE_VEN_NUM
Subroutine to validate Vendor Number
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_VEN_NUM .
IF NOT S_LIFNR[] IS INITIAL.
SELECT LIFNR " Vendor Number
FROM LFA1
INTO W_LIFNR
UP TO 1 ROWS
WHERE LIFNR IN S_LIFNR.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E002(M8) WITH W_SPACE.
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_LIFNR[]...
ENDFORM. " VALIDATE_VEN_NUM
*& Form VALIDATE_PUR_GRP
Subroutine to validate the Purchase Group
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_PUR_GRP .
IF NOT S_EKGRP[] IS INITIAL.
SELECT EKGRP " Purchase Group
FROM T024
INTO W_EKGRP
UP TO 1 ROWS
WHERE EKGRP IN S_EKGRP.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E622(M8) WITH W_SPACE.
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_EKFRP[]...
ENDFORM. " VALIDATE_PUR_GRP
*& Form FILL_VARIANT
Subroutine to fill the Variant Structure
There are no interface parameters to be passed to this subroutine
FORM FILL_VARIANT .
Filling the Variant structure
W_VARIANT-REPORT = SY-REPID.
W_VARIANT-USERNAME = SY-UNAME.
ENDFORM. " FILL_VARIANT
Regards,
Pavan -
ABAP QUERY: Selection text name change : seq. of column sequence in output
hi friends,
1)I need to change the text of the selection field in ABAP QUERY REPORT
please help me. t code: SQ03 : User Group(zabc) and report name (zabc).
Environment -> infosets.
in the field group, double click field name to be changed. I tried to change it. The changed name is only reflecting in the list output, but not in the selection screen.
I want the text to be changed even in selection screen.
2)I want to change the position of the column ie end(last colum) to 8th column in the report output. Please help me.
Environment -> Queries -. I tried with 'Output sequence' and given no as '8'. But is not reflected and the column is still displayed at last column.
Please help meGo to Query and go to selection field and change the selection text.
Hope this help. -
ABAP QUERY PROGRAM OUTPUT SHOULD DISPLAY FROM SAP SCRIPT.
THIS IS MY URGENT REQUIREMENT ...
I DONT KNOW ABAP QUERY PROGRAM ..
PLEASE SUGGEST ME A WAY ON THIS ....
Functional requirements
Introduction
The wish of the customer is a printable customer overview. All desired fields will be shown in a new query called ZZADDRSS_CO. Double entries are taken for granted because of the data taken from the sales area and because of multiple contact persons. The customer accepts this. It should be made possible that the user creates and saves its own variant.
A second overview is needed, another ABAP will be developed for this requirement. This ABAP will show all the customer data and this list will have the possibility to be printed.
Solution
New Query ZZADDRESS_CO
The desired fields of attachment 1 need to be shown in the query.
The selection criteria are shown in attachment 2.
The column names of the additional data have to changed in the query.
Customer Overview.
Functional specification.
On behalf of this customer overview a standard SAP transaction will be used (transaction VC/2).This transaction will be extended.
The fields are shown on screen with the described headers. Printing of the overview will be done via SAP script. The script makes use of a fixed layout of the data.
The selection criteria are specified in attachment 2.
The layout of the customer overview and the SAP Script are specified in attachment 3.
Specification.
The next steps need to be performed.
1. A routine per infoblock need to be created in Include RV77UNNN. In this routine the data is retrieved and written down to the screen and script,
Example LST1_901 . In include RV77SNNN you can find the standard infoblocks.
2. Adapt via transaction SE16 table TFRM.
3. Create a new view in the customizing (sales and distribution- Sales support-sales summary-Assign Reporting Views).Assign the new view to the infoblocks.(Example view 001 is assigned to block 901).
4. In customizing it is not possible to assign the correct window and element to the infoblock .so this is done via SE16 in table T182A.
5. Adapt script. Copy script SD-SALES-SUMMARY to a Z-SALES_SUMM.
Assign this new version to the new view in customizing. Create in the main window the element who writes the data on behalf of the print.
Attachment 1 Desired fields
Header: Address
~ Customer number KNA1-KUNNR
~ Title KAN1-ANRED
~ Name1 ADRC-NAME1
~ Name2 ADRC-NAME2
~ Name3 ADRC-NAME3
~ Name4 ADRC-NAME4
~ PO Box ADRC-PO_BOX
~ PO Box POSTAL CODE ADRC-POST_CODE2
~ PO Box city ADRC-PO_BOX_LOC
~ Telephone no1 ADR2-TEL_NUMBER 1ST RECORD
~ Telephone no2 ADR2-TEL_NUMBER 2ND RECORD
~ Fax number1 ADR3-FAX_NUMBER 1ST RECORD
~ Fax number2 ADR3-FAX_NUMBER 2ND RECORD
~ E-mail ADR6-SMTP_ADDR
~ Search item ADRC-SORT1
~ Notes ADRT-REMARK
Header: control data
~ VAT registration number KAN1-STCEG
Header: Payment transactions
~Bank country key KNBK-BANKS
~Bank key KNBK-BANKL
~Bank Account number KNBK-BANKN
Header: Marketing
~ Industry key KNA1-BRSCH
~ Industry code 1 KNA1-BRAN1
~ Industry code 2 KNA1-BRAN2
~ Industry code 3 KNA1-BRAN3
~ Industry code 4 KNA1-BRAN4
~ Industry code 5 KNA1-BRAN5
~Annual sales, currency, year KNA1-UMSA1, KNA1-UWAER, KNA1-UMAH
~ Yearly no of employees, year KAN1-JMZAH, KNA1-JMJAH
~ Fiscal year variant KNA1-PERIV
~Legal status KNA1-GFORM
Header: Correspondence
~ Our account number at customer KNB1-EIKTO
Header: sales
~ Sales office KNVV-VKBUR
~ Customer group KNVV-KDGRP
~ ABC-classification KNVV-KLABC
Header: Invoice
~Tax classification KNVI-TAXKD
~Terms of payment key KNVV-ZTERM
~
Header: Contact Persons
~Title KNVK-ANRED
~Name KNVK-NAME1
~Advertising material KNVK-NMAIL
~Martial Status KNVK-FAMST
~Notes KNVK-PARAU
~Function KNVK-PAFKT
~Department KNVK-ABTNR
Header: Partnerroles
~Personnel Number KNVP-PERNR
~Name of employee PA0001-ENAME
Header: Additional Data
~Attribute 1 KNA1-KATR1
~Creation date KNA1-ERDAT
~Attribute 2 KNA1-KATR2
~Change date of field KNA1-KATR2 CDHDR-UDATE
~Attribute 3 KNA1-KATR3
~Attribute 4 KNA1-KATR4
~Attribute 5 KNA1-KATR5
~Attribute 6 KNA1-KATR6
Attachment 2 Selection fields
~Customer number
~Sales office
~Personnel Number
~Sales Organization (default NL01)
~Industry key
~Industry codes (1 till 5)
~ABC- classification
~Creation date
~Attribute 1
~Attribute 2
~Attribute 3
~Attribute 4
~Attribute 5
Attachment 3 Customer overview + SAP Script
Customer master data sheet: 11490 Page1
Requested by karen Dunnewold Date: 25.08.2004
Address
(Default SAP script ADDRESS statement)
Title
Name1
Street + number
PO Box city
Country
Search term: ADRC-SORT1
Telephone 1: ADR2-TEL_NUMBER 2: ADR2-TEL_NUMBER
Fax 1: ADR3-FAX_NUMBER 2: ADR3-FAX_NUMBER
E-mail: ADR6-SMTP_ADDR
Notes: ADRT-REMARK
PO BOX
ADRC-PO_BOX
ADRC-POST_CODE2 ADRC-PO_BOX_LOC
T005T-LANDX (T005T-LAND1 = ADRC-COUNTRY)
Control data
VAT registration number: KNA1-STCEG
Payment transactions
Country: KNBK-BANKS Bank-key: KNBK u2013 BANKL Bank account: KNBK-BANKN
Marketing
Industry KNA1-BRSCH Industry Description
Industry code1 KNA1-BRAN1 Industry Description
Industry code2 KNA1-BRAN2 Industry Description
Industry code3 KNA1-BRAN3 Industry Description
Industry code4 KNA1-BRAN4 Industry Description
Industry code5 KNA1-BRAN5 Industry Description
Figures
Annual Sales KNA1-UMSA1, KNA1-UWAER in KNA1-UMAH
Employees KNA1-JMZAH in KNA1-JMJAH
Legal status KNA1-GFORM description
Customer master data sheet 11490 Page 2
Requested by karen Dunnewold Date: 25.08.2004
Contact Persons
KNVK-ANRED
Mailings: KNVK-NMAIL Notes: KNVK-PARAU
KNVK-ANRED
Mailings: KNVK-NMAIL Notes: KNVK-PARAU
Correspondence
Our account number at customer KNB1-EIKTO
Sales
Sales office KNVV-VKBUR Description
Customer group KNVV-KDGRP Description
ABC-classify KNVV-KLABC
Currency KNVV-WAERS
Invoice
Terms of payment key KNVV-ZTERM Tax classification KNV1-TAXKD
Description
Partner (Leave SAP default)
Partnerrole Number Name
KNVP-PARVW KNVP-KUNNR NAME1
KNVP-PARVW KNVP-KUNNR NAME1
Additional data
Attribute1 kna1-katr1 Description
Attribute2 kna1-katr2 Description
Attribute3 kna1-katr3 Description
Attribute4 kna1-katr4 Description
Attribute5 kna1-katr5 Description
Attribute6 kna1-katr6 Descriptionhi narayana
i think u need to write a driving program and a provided with a smatform u sit along with the SD consultant.
ur further views can be shared.
Rgs,
Venkat. -
Including MANDT field in ABAP Query Report as output field
Hi All,
I need to display the client(MANDT) field in the ABAP Query Report as an output field.
But in SQ01 where we select the fields to be displayed as output in query , this field is not visible.
I later checked in the Infoset. Even in the infoset the field MANDT is greyed out and all other fields are active.
Can someone tell me how to include the field MANDT in the output of the ABAP Query Report.self resolved
-
ABAP Query insterting 'NO' on output
Hi Gurus!
I've created an ABAP Query which reads various Infotypes in HR.
There are screen modifications which hide\display certain fields on Infotypes depending on the Country Grouping.
However, on my Query, when I run for a Country for which a field(s) are hidden, the Query enters the value 'NO' on the Query output.
Basically, the screen modification has the field(s) hidden for that Country - so no data can be maintained for it.
But the field(s) is available for other Country Groups.
If I run the Query for an Employee, it returns the value 'NO' in a column even though no value can be maintained in the field as it's hidden by the screen modification.
Does this make sense?
Here's an example:
On each Employee Master in Bahrain (Country - BH), the date of a Medical Examination must be indicated.
This Infotype also exists for Employees in Ireland (Country - 11) - however the 'Date of Medical Exam' field is hidden by a screen modification.
When I run my Query, it inserts the word 'NO' in the 'Date of Medical Exam' field when it's run for EEs in Ireland.
This field is hidden on the Infotype as it's not required.
Do you know if the ouput value can be left blank instead of inserting the word 'NO' when the Query is selecting data from fields which are hidden via screen modifications???
Thanks,
kAT LINE-SELECTION.
case sy-cucol.
when 16 OR 17 . "Col No
DATA: BDCDATA TYPE TABLE OF BDCDATA.
DATA: ITAB TYPE TABLE OF BDCMSGCOLL.
DATA: PROGRAM LIKE SY-REPID,
WA_BDCDATA TYPE BDCDATA.
WA_BDCDATA-PROGRAM = 'SAPMV45A'.
WA_BDCDATA-DYNPRO = '0102'.
WA_BDCDATA-DYNBEGIN = 'X'.
WA_BDCDATA-FNAM = 'VBAK-VBELN'.
WA_BDCDATA-FVAL = IT_ITAB-VBELN.
APPEND WA_BDCDATA TO BDCDATA.
CLEAR WA_BDCDATA.
CALL TRANSACTION 'VA03' USING BDCDATA MODE 'A'
MESSAGES INTO ITAB.
Regards
Ravi -
How can we have Multiple table outputs in a ABAP Query .
HI Experts .
query output in 3 different abap list s
My requirement is to have basic list of 20 fields and the summation list of 6 individual fields ( grouping ) and another table output of 10 fields in a single query and single output . the second and the 3 rd output fields are from the basic list only .
kindly help
PolsThe user is asking about Query with more than one list as output.
like Multiple list in a ouput.
Maybe you are looking for
-
Unable to sign into Creative Cloud Connection or AAM
Can't sign in to creative cloud connection or adobe application manager when i enter email and password and click sign in application crash Process: PDApp Re: Creative cloud subscription renewal problems Path: /Applications/Utiliti
-
How to use the Microsoft RDP ActiveX with span or multimon options ?
Since windows Vista, the Microsoft RDP support a /span option that allows to do remote desktop on multiple monitor. In windows 7 and Server 2008, another option are availble to support /multimon which allows even more complex layout. I checked the
-
Can't open new tab by going to file/new tab (or CTRL+T or clicking on the new tab field). Only way is to right click on a link and choose open in new tab.
-
Conversion of Oracle Reports to BI Publishser.
Hi, When trying to convert the oracle report to BI publisher using the conversion utility Iam encountering the below error. Exception in thread "main" java.lang.UnsupportedClassVersionError: oracle/apps/x do/rdfparser/BIPBatchConversion (Unsupported
-
SharePoint Designer Workflow unnecessary set Modified By value as System Account.
Hi Friends, I have created SharePoint Designer Workflow, it update other List Item as well same Item on Item Adding and Editing event. I have Developed workflow using System Account. While doing any change by general user in Workflow list it update M