ABAP Query - Selection Screen Values Usage

Hi,
I have created an ABAP Query. For one of the selection-screen fields (CAUFV-FTRMI)
which is select-options, I want to use the values during coding (in the where clause of a select query)
in Extras section under the event "record processing". Please suggest how to make the the selection-screen values
available during record processing event. Thanks in advance.
Regards,
Tejas Savla

Hi Kartik,
I need to fetch data from some table KEKO depending on the values entered on the selection-screen for the field CAUFV-FTRMI. So, I need to find a way by which the selection-screen input values are available in the record processing event. The values are available in some variable SP$00002 of the automatically generated report program. But, this variable cannot be used in the Coding section of the ABAP QUERY. Please advise.
Thanks & Regards,
Tejas Savla

Similar Messages

Addition of checkbox and 2 fields in ABap query selection screen

Hi
I need to add chack boxes and 2 fields in ABAP query which is using LDB QMI. can u pls let me know how to do that.

Hi Tarun,
I am still not clear with the problem..I guess you require plant in your selection screen which you have.
i guess if you go to sq01tcode there is a option infoset query from where you can give your selection options and value.
have you selected all the fields in infoset and made a selection screen?
When you have done with your infoset you just need to diplay the fields and there is a automatic program generated.
Let me know...
Regards,
Nihkil.

Validate plants selected in Abap Query selection screen

Hi Everyone,
I have a requirement wherein i have to validate 'authority check' for the plants populated in the selection screen in an already created abap query.
I tried adding code in the code section. But i dont know how to use the select-option parameter. It already exists(VBAP-WERKS) in the table which is used for join, so i cannot add it in the additional fields. Am i correct ?
Also, i saw that the report program for this query uses this parameter sa SP$00008. I tried using it but it gives an error The IN operator with "SP$00008" is followed neither by an internal table nor by a value list.
Please help.
Also, please advice whether this requirement can be catered in this query alone? or should i go with writing a new report program for this? ( i personally feel that this would beat the purpose of using Abap Query. )
Regards,
Tarun

Hi Tarun,
I am still not clear with the problem..I guess you require plant in your selection screen which you have.
i guess if you go to sq01tcode there is a option infoset query from where you can give your selection options and value.
have you selected all the fields in infoset and made a selection screen?
When you have done with your infoset you just need to diplay the fields and there is a automatic program generated.
Let me know...
Regards,
Nihkil.

SQ01 - Include a check box on ABAP query Selection screen

Hi Experts,
For my Abap Query, on the selection screen i am planning to include a check box such that if i click on the check box then a field will be displayed in the resulting output . On the other hand if i do not check on i should not be able the field in the output.
Please tell me how do i do this.
Thanks
Venkata Pradeep.

In infoset, Extras code tab
Code section: At selection-screen output
Do something like below:
IF radiobutton1 = 'X'.
     LOOP AT SCREEN.
          IF screen-group1 = 'XXXX'.         "XXX is the filed group name you want to hide., you have to                                                                  find out what is it.
               screen-input = '1'.
               screen-invisible = '0'.
               MODIFY SCREEN.
          ENDIF.
     ENDLOOP.
ELSE.
     LOOP AT SCREEN.
          IF screen-group1 = 'XXX'.
               screen-input = '0'.
               screen-invisible = '1'.
               MODIFY SCREEN.
          ENDIF.
     ENDLOOP.
ENDIF.

ABAP Query Selection screen

Hi,
I have an existing ABAP Query, my req is to add new Radio buttions block after the current seelction paramertes.
i created radiobuttons in SQ02 infoset query with radiobuttons but when i run the report, selections screen has radio buttons first and then previous selection criteria fields displaying...
my req is first previous selection fields then radio buttons.
how to change the sequence of the fields in selection screen?
and based on the radio buttons, i need to filter the output data...
in which event i have to write the code?
Thanks
Giri

Sudheer,
it is ABAP Query report... from SQ02... i cant modify those in SE38...
current selection parameters are from table fields selected in SQ01 Query.... and radio buttons are in SQ02 Infoset.
Giri

ABAP Query Selection screen parameters

I need to add an additional selection screen parameter in existing ABAP Query. How to modify the selection screen fields in existing ABAP query ? Kindly help me.

Hi,
GO to info set transaction SQ02
Give the infoset
Press change
Press the selections button..Shift F7
In the right hand side you will get a table control to enter the selection screen parameters..
Press create button on top of the table control to create new parameters
Thanks,
Naren

ABAP Query Selection Screen Comment

Hi,
I want to display some text (just text) on Selection Screen of an abap query. If this was a regular abap program I could have simply used "SELECTION-SCREEN COMMENT... " and that would have been enough. But since I dont seem to have access to Initialize event I cant use this option.
1. Is there some way I can write code which will be executed in the initialize event of the abap query
2. Is there some other way for us to just display comment (without any selection field) on the selection screen of abap query.

Hi Saquib,
Is the navigation correct ? I dont see any onfoset anywhere on se38 editor. Can you eloborate please.
Thanks and Regards,
Ben.
Message was edited by: Daniel Ben

Checkbox in the ABAP query selection screen

Hi experts,
The reqiurement is to add checkbox(parameter name: EX_ZE_ST) to the selection screen of the query and if its checked then the records with the quantity = 0, should not be displayed in the output.
I added a check box and now my issue is, how to suppress displaying the record having quantity = 0.
that quantity field is a custom added field and in sq02 i selected that quantity( Z_HANDQTY) field and gone into the code for the same and wrote below code...
the total generated table view for this query is : marav
if EX_ZE_ST = 'X' and Z_HANDQTY = 0.
break-point.
clear: marav, Z_MATDESC, Z_MATGRPDESC, Z_TAXIND,
        Z_TAXTYPE, MARD, MARD-LGPBE, Z_PREVMATNR,
        Z_CSTTOTAL, Z_CSTUNIT, Z_VSTOCK.
        FREE MEMORY ID 'AQLISTDATA'.
endif.
But still i could see a blank line in the output if that record has quantity( Z_HANDQTY) = 0.
Thanks in advance...
Karthik

hi,
Try this wa y...
if EX_ZE_ST = 'X' and Z_HANDQTY = 0.
break-point.
clear: marav, Z_MATDESC, Z_MATGRPDESC, Z_TAXIND,
Z_TAXTYPE, MARD, MARD-LGPBE, Z_PREVMATNR,
Z_CSTTOTAL, Z_CSTUNIT, Z_VSTOCK.
FREE MEMORY ID 'AQLISTDATA'.
Continue.
endif.

Dashboard having same query with different selection screen values

Hi,
I want to create a dashboard by including different versions (different selection screen values, like yesterday, last week, last month) of same query. Is it possible to achieve it by without creating separate queries? We are in BI 7.
Thanks in advance
Nisha

Hi,
I want to create a dashboard by including different versions (different selection screen values, like yesterday, last week, last month) of same query. Is it possible to achieve it by without creating separate queries? We are in BI 7.
Thanks in advance
Nisha

How can I get selection screen values from outside of program?

Hi. all.
Now. I'm developing moritoring systems and I have problems. for getting selection screen values in runtime. Is there any function, methods or structure to know this?
I'd like to get selection screen values while several programs working in runtime and update these values to table to show current system's status and input values for users in real time.
For example.
Now. 3 PGMs are working on systems.
each PGM is ZAAA01, ZAAA02, ZAAA03.
and ZAAA01 needs input parameter P01, ZAAA02 needs input parameter P02, ZAAA03 needs input parameter P03.
In this case, I have to know values of P01, P02 and P03.
The mornitoring systems will show current working status of PGMs(ZAAA01~03)' and these PGMs' input values.
As fas as I know, the structure 'SCREEN' can be used in each PGM for runtime. Is there any SAP system structure or something else for this purpose?
I hope your hopeful repsponse.
Thanks.

Umm..I need to explain more about this.
of course I know SET, GET PARAMETERS.
But I'd like to minimize coding for each PGM level.
I have over hundreds PGMs and I have to develop the PGM(including tables and structures) that mornitor
all of those PGMs on a report in real-time.
This PGM is kind of Process Manager.
First I should know dialogue job PGM and background job that pass parameters using SAP(ABAP) Memory.
And then I have to update those PGMs' input values via screens into tables in real-time.
So, I couldn't use SET,GET PARAMETERS for this PGM.
I want to know methods that can be used for getting information about runtime PGMs' selection screen field values in SAP systems wide.
Please help me some one knows this.

F4 search-help in infoset query selection-screen fields

Hi all,
I created an infoset, and it's corresponding query, and now I need to associate F4 search-help in two of the selection-screen fields. Since they don't have any reference field associated (they are SAP standard table fields), there are no possible values available to select.
How can I do this?
I have already tried to use the "AT SELECTION-SCREEN OUTPUT" in the infoset, but I'm not able to do that. When I try to use the select-options generated by the query (SP$00013 and SP$00014) I have a syntax error with "Field not known".
Can you help me? I never done this before, so I really don't have a guess.
Thanks in advance.
Beste regards,
Sónia Gonçalves

Hi all,
I have found thread that helped me a lot in this issue.
I just have one more doubt: I created the selection criterion and I can already see it in the query selection-screen, but it's appearing in the top of the selection-screen, in a different area called "General data selections".
Isn't it possible to include it in the "Report-specific selctions"?
Thanks in advance.
Best regards,
Sónia Gonçalves

Query Selection screen field validatoin

I am testing a query using the RSRT2 transaction and have a query selection screen whose fields i want to create custom validations for. ( which should trigger when check or execute is pressed )
How can this be achieved ?
I tried looking for exits but did not find a relevant one.
Thanks in advance.

Hello,
You need to write a routine in SMOD for selection screen validations.
It will come in i_step = 3. please refer foll code as example:
The code example is to check whether date is less than or equal to current date. If user enters future date it pop ups saying enter date less than or equal to current date.
DATA: LI_VAR like rrrangeexit,
       wa_t_var_range like LI_VAR,
       count type i value 0.
IF i_s_rkb1d-infocube EQ 'CUBE1' or
   i_s_rkb1d-infocube EQ 'CUBE2'.
Check whether only one of date variable is entered in variable screen.
IF I_STEP = 3.
    Read table i_t_var_range into wa_t_var_range with key vnam = 'VARDATE'.
      if wa_t_var_range-low > sy-datum.
        CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
          EXPORTING
            I_CLASS = 'RSBBS'
            I_TYPE   = 'E'
            I_NUMBER = '000'
            I_MSGV1 = 'Enter date less than or equal to current date'.
        raise again.
      endif.
ENDIF.
ENDIF.
Regards,
Shashank

Query Selection Screen restriction

Hello All,
In my query selection screen, i have date, month and week as selection parameters. Now my requirement is that user should select only one of them. If he selects more than one ie combination of two or all three, than query should not show any data.
Can this be achieved? If yes how.
Regds,
Shashank

Hi,
You can try out, customer exit with I_STEP = 3.
using which a exception will be raised if user enters value for more than one variable.
Hope it helps......
Regards,
Umesh.

Query Selection Screen does not appear in Web Analyzer

Hi Experts,
Query Selection Screen appears when we open the query in Bex Analayzer in production system. But when we open the query in ABAP or JAVA Web view, the selection screen does not appears.
As the volume of data in the cube is very high, and since the selection screen is not appearing, the query extracts 1.5Mrecords and results in dump.
Kindly let me know the possibility for selection screen not appearing.
Note: The selection screen appear in Development system in Bex Analyzer, ABAP View and Java View
Regards
Suresh Kumar

Dear Suresh,
You can check if the parameter &VARIABLE_SCREEN=X is added to standard template or not, If not add this,
In order to add this parameter in the webtemplate you have to change 0ANALYSIS_PATTERN and save it as ZANALYSIS_PATTERN and enter this standard web template under TCODE RSCUSTV27.
Also I would like to explain you the behavior of Web Analyzer,
Parameter VARIABLE_SCREEN=X only influences the WEB application at startup. This will not come into affect
when you use the 'New Analysis' button. The 'New Analysis' button resets the dataprovider so this would not
affect the variable screen and would not redisplay the variable screen as you require.
Regards,
Arvind

At selection-screen value- help

Hi All,
I have a requirement that based on a radio button one at selection-screen value-help is triggered and on based on a different radio button another at selection-screen value-help should be triggered.
can it be achieved.
Regards,
Jeetu

AT SELECTION-SCREEN - selscreen_event
Syntax
| { ON {para|selcrit} }
| { ON END OF selcrit }
| { ON BLOCK block }
| { ON RADIOBUTTON GROUP radi }
| { }
| { ON {HELP-REQUEST|VALUE-REQUEST}
|   FOR {para|selcrit-low|selcrit-high} }
| { ON EXIT-COMMAND }.
Alternatives:
1. ... OUTPUT
2. ... ON {para|selcrit}
3. ... ON END OF selcrit
4. ... ON BLOCK block
5. ... ON RADIOBUTTON GROUP radi
6. ... { }
7. ... ON {HELP-REQUEST|VALUE-REQUEST} FOR
      {para|selcrit-low|selcrit-high} }
8. ... ON EXIT-COMMAND
Effect
These additions allow individual evaluation of specific elements of the selection screens of the program. The information as to which selection has triggered the event is contained in the system field sy-dynnr.
Alternative 1
... OUTPUT
Effect
This event is triggered at the screen event PBO of a selection screen. In the event block, the selection screen can be prepared through assignments to the data objects of parameters and selection criteria and through dynamic screen modifications.
Note
The assignments to input fields in the event block AT SELECTION-SCREEN OUTPUT always affect the selection screen and overwrite the user inputs from previous displays of the same selection screen. Assignments in the event blocks LOAD-OF-PROGRAM oder INITIALIZATION, on the other hand, only have an effect at first program start.
Alternative 2
... ON {para|selcrit}
Effect
This event is triggered at the screen event PAI of a selection screen if the content of the input field of a parameter para or a line of a selection criterion selcrit was passed to the ABAP program. In the event block, the user input can be checked. Sending a warning or an error message in the event block makes the fields para and selcrit ready for input again.
No parameter that is defined as a radio button can be specified. For this purpose, the addition ON RADIOBUTTON GROUP is provided.
Note
If a user action takes place in the dialog box for the multiple selection of a selection criterion selcrit, the entries of the selection table are passed to the program, line by line. For each line, the event AT SELECTION-SCREEN ON selcrit is triggered.
Alternative 3
... ON END OF selcrit
Effect
This event is triggered after the selection table selcrit has been fully passed to the program after a user action in the dialog box for the multiple selection has taken place. In the event block, the entire selection table can be checked.
Alternative 4
... ON BLOCK block
Effect
This event is triggered at the screen event PAI of a selection screen if all the input fields of a block block of the selection screen were passed to the ABAP program. In the event block, the user inputs can be checked. Sending a warning or an error message in the event block makes all the fields of the block block ready for input again.
Alternative 5
... ON RADIOBUTTON GROUP radi
Effect
This event is triggered at the screen event PAI of a selection screen if all the fields of a radio button group radi of the selection screen were passed to the ABAP program. In the event block, the user input can be checked. Sending a warning or error message in the event block makes all the radion buttons of the block radi ready for input again.
Note
The individual fields of a radio button group are not passed individually and do not trigger the event AT SELECTION-SCREEN ON par.
Alternative 6
Effect
The event AT SELECTION-SCREEN itself is triggered as the last event of selection screen processing if all the input values were passed to the program. In this event block, all the user inputs can be checked. Sending a warning or an error message in the event block makes all the screen fields ready for input once again.
Alternative 7
... ON { HELP-REQUEST | VALUE-REQUEST } FOR
    {para|selcrit-low|selcrit-high} }
Effect
The two events ON HELP-REQUEST and ON VALUE-REQUEST are triggered at the screen events POH and POV of a selection screen if - for the input field of a parameter para or one of the input fields of a selection criterion selcrit - the field help F1 or the input help F4 was called. Other selection events are not triggered.
In the event blocks, a self-defined field or input field can be programmed, which overrides any helps possibly defined in the ABAP Dictionary.
Notes
These event blocks can only be implemented for fields of the selection screen that are defined in the same ABAP program and not in a possibly linked logical database.
With the events for the field and input help, no data is transported between the selection screen and the ABAP program. As with general screens, suitable function modules must be used for these. The parameters and selection criteria changed for the input help are transported to the selection screen.
Alternative 8
... ON EXIT-COMMAND
Effect
This event is triggered if the user has called one of the functions Back, Exit or Cancel. In the event block, possible clean-up actions can be executed.
Example
In these executable programs, a standard selection screen and a further selection screen are defined. In the event blocks AT SELECTION-SCREEN, the inputs in the selection screens can be specially handled using the name p_carrid and the screen number in sy-dynnr.
REPORT demo_at_selection_screen.
Global data
DATA: sflight_tab TYPE TABLE OF sflight,
      sflight_wa LIKE LINE OF sflight_tab.
Selection screens
PARAMETERS p_carrid TYPE spfli-carrid.
SELECTION-SCREEN BEGIN OF SCREEN 500.
SELECT-OPTIONS s_conn FOR sflight_wa-connid.
DATA s_conn_wa LIKE LINE OF s_conn.
SELECTION-SCREEN END OF SCREEN 500.
Handling selection screen events
AT SELECTION-SCREEN ON p_carrid.
IF p_carrid IS INITIAL.
    MESSAGE 'Please enter a value' TYPE 'E'.
ENDIF.
AUTHORITY-CHECK OBJECT 'S_CARRID'
                      ID 'CARRID' FIELD p_carrid
                      ID 'ACTVT' FIELD '03'.
IF sy-subrc = 4.
    MESSAGE 'No authorization for carrier' TYPE 'E'.
ELSEIF sy-subrc <> 0.
    MESSAGE 'Error in authority check' TYPE 'A'.
ELSE.
    IF sy-ucomm = 'ONLI'.
      CALL SELECTION-SCREEN '0500'.
    ENDIF.
ENDIF.
AT SELECTION-SCREEN.
IF sy-dynnr = '0500'.
    IF s_conn IS INITIAL.
      MESSAGE 'Please enter values' TYPE 'W'.
    ELSE.
      SELECT *
             FROM sflight
             INTO TABLE sflight_tab
             WHERE carrid = p_carrid AND
                   connid IN s_conn.
      IF sy-subrc <> 0.
        MESSAGE 'No flights found' TYPE 'E'.
      ENDIF.
    ENDIF.
ENDIF.
Main program
START-OF-SELECTION.

ABAP Query - Selection Screen Values Usage

Similar Messages

Maybe you are looking for