ABAP query using PSJ

Is there a way to get the company code project profile and the co amount using an Query .
something similar to CJI3 but with the comapny code and project profile.
Or if i have to use ABAP.

There are two things. ( Your question is not quite clear, post question clearly, so platform can help you better way )
1. Restrict you report selection based on project Project profile, company code etc. give * in project filed and use dynamic selection functionality
2. If after execution you wanted to display some additional filed
First check change layout option after executing CJI3, if your required field is not there in that case, your requirement can be addressed via Exit COOMEP01 (Actual EXIT_SAPLKAEP_001)
With Regards
Nitin P.

Similar Messages

ABAP Query Using LDB

Hello Frn's
I need to develop a abap Query using LDB , for this a Infoset is allready created , which uses PNPCE LDB .
Below i am Descrbing the scenerio , for which we need to develop the query ....
Dept/Div Transfer
Employees who transferred dept or division within specified date range:
EmpID
Last Name, First Name
Date of transfer
New department
New division
Current supervisor
Old department
Old division
How can i fitler out the data of our requirment ... because i want to use same infoset in diffrent query .
Please provide some solution
Thanks and Regards..
Priyank Dixit

Hi Priyank,
First you need to check whether all the required fields are available there in the LDB PNPCE(I guess you are using the same).
I think old department, old division must not be available there. Then you need to add it in your Infoset and write custom code for these fields. Once you are done with custom coding, you can use this infoset for creating queries.
Use trnx SQ02 to create queries, either SAP or Infoset.
Hope it helps. Let me know if you need some more help.
Raveesh

ABAP Query using AFRU , COBRA , AUFK

Dear All
I have created an ABAP query using the join table AFRU, COBRA and AUFK. The query is generated.
But there is a problem , the cancelled time confirmations are stored in AFRU as positive values. But the report IW47 gived the cancelled time confirmation in negative values.
The query is giving the canecelled time confirmations as positive and subsequently the toal is affected.
Can anybody let me know, how can i make the cancelled time time confirmations as negative in my query.
Regards
Manish Bansal

This is solved
Manish

ABAP query using logical database KDF is not populating custom fields

Hi Experts ,
I created two following queries
1.       VENDORCATKDF – uses KDF logical database
2.       VENDORCATLFA1 – uses table = LFA1
I’m pulling the same information in both queries:
·         Vendor Number
·         Country
·         Vendor Name
·         Vendor Category (custom fields added to LFA1)
The results for the query that uses the logical database KDF is incorrect. It doesn’t pull in the flag on the custom field LFA1-ZMRO.   Even though the logical database KDF is made up of the table LFA1 and has these fields.
Is there something that can be done – so that all of these “custom” category fields under LFA1 (such as LFA1-ZZMRO) – get pulled into queries – when we use the logical database KDF ?

Hi,
I have got the error removed by ensuring that fields from one table are a part of one line ( taking help of ruler) only. But the underlying problem remains, the output is not ALV but List output.
I do not think having additional fields in the query is reason for this.
Is it bcoz iI am adjusting the output length of columns to ensure no hierarchical error ?
Can we not have a query using LDB which is shown as SAP List?
Regards,
Garima.

SAP / ABAP Query - using logical database

Hi ,
We have a mandate to implement SAP Query using only Logical Databases (LDB ) .
We understand that there are several issues using this approach .
1 ) Paralled tables in MM need to be displayed on separate lines .
2 ) Statistics based on fields from 2 different tables cannot be produced eg: EKPO ( PO Number ) and EKKN . (Cost Center )
Please share your experiences .
Thank you in advance .
Kishore
Kishore

Adeel,
I do appreciate your experience and respect you for knowledge on SAP Query.
Joining tables seem simple to IT experts but not so for end users. SAP Query is an end-user tool and users seem to need a simple user-friend, drag-and-drop solution to extract information using SAP Query based on a pre-defined infoset. Various SAP conferences have been advocating the use of SAP delivered Logical Databses to create infosets in order to harness the various advantages of LDBs.
In MM there are several LDBs (e.g. ELM, EBM etc) to create queries on EKPO and EKKN. The problem arises when you use the same LDB to extract information from more than the above two tables e.g. EKPO, EKET, EKKN and EKBE. SAP expects you to display fields on multiple lines and also does not allow producing statistics based on fields from two parallel tables say EKKN and EKBE. Moreover, multi-line reports cannot be produced in the ALV/SLV format.
We are also looking for best practise solutions in providing SAP Query to MM or FI users based on SAP delivered Logical Databases.
Pascal

ABAP query using IHPA--need partner address

I am using SQ01 to create a query. I amusing the EQUI and IHPA. I need the partner address for Partner function = EC. I have the parner number but not the address number, so I cannot join to table ADRC.

Hi Priyank,
First you need to check whether all the required fields are available there in the LDB PNPCE(I guess you are using the same).
I think old department, old division must not be available there. Then you need to add it in your Infoset and write custom code for these fields. Once you are done with custom coding, you can use this infoset for creating queries.
Use trnx SQ02 to create queries, either SAP or Infoset.
Hope it helps. Let me know if you need some more help.
Raveesh

ABAP Query using SQVI

I've created a query to identify approver from linking several tables. The result data show several duplicate record because I only want to retrieve the User ID. Is there a way to select only Unique Record?
Regards,
Thomas

hi,
try a SELECT SINGLE [FIELDS/*].... or a SELECT * INTO ITAB FROM XTABLE UP TO 1 ROWS.
Regards

PNPCE in ABAP Query(SQ01) Selection is not working completely

Hi All,
I have developed an ABAP query using LDB PNPCE. I am reading data from IT000,IT0001 etc . I test the query in QA and I noticed that the PNCPCE screen doesnt care about the selection in query. Like I have given the date range in PNCPE default screen. But its not filtering that data at all. It pulling up the employees regardless of date, it behaves the same for field action type (P0000-MASSn). The surprising thing is that for company code its working fine. My question is that Why PNPCE standard screen-selection not filtering data in ABAP query.
Did any one of you also experience that?
FYI
I also find an OSS note # 730005 but we are already on 52 Patch !!
OSS note :PNPCE: Incorrect data of infotype 0000 and 0001
Symptom
When you carry out a reprot which is based on logical database PNPCE, errors occur during the processing of infotypes 0000 and 0001.
Other terms
PNPCE, AS PERSON, P0000, P0001, data selection period, person selection period, CHECK_IT_0000_DATA_RESTRICTED, CHECK_IT_0001_DATA_RESTRICTED
Reason and Prerequisites
You start a report which is based on logical database PNPCE. In the report, infotype 0000 or 0001 is processed (that is, it was declared via the INFOTYPES statement). At event 'GET GROUP' or 'GET PERAS', the system either returns too few data records in the infotype tables or it returns data records twice.
The error (missing data records) has only occured since the implementation of Note 687004 or the import of Support Package SAPKE47028.
Solution
Implement the attached corrections. or import the corresponding Support Package.
Thanks,
Saquib Khan

Hi Saquib,
Recently i am facing the same issue can u pls do reply how you have overcome this issue..The data is not getting picked up at the right time it is lately picked up by the program . Earlier it was PNP and it has been changed to PNPCE also we had implemented OSS Note 687004 and the later's Notes were also implemented but still now we are unable to track down why there is delay in picking up the records this has been happening for the past 8-10 Months(i m not sure far more before). I am finding 2 main issues,
1. we are using GET peras in PNPCE and no other event after that may be this is not fetching all the data because my selection screen does contain PERSONID where i suppose there should be GET PERSON event to define it
2. RP_READ_INFOTYPE macro while using for P0000 ,, the code in the macro is such that it fetches using P0001 also ...I suppose if there are any inconsistency between IT0 and IT1 then this might one to take care ...
kindly let me know how you have approached to resolve this issue.

PNPCE in ABAP Query !!! Slection is not working completely

Hi
I have developed an ABAP query using LDB PNPCE. I am reading data from IT000,IT0001 etc . I test the query in QA and I noticed that the PNCPCE screen doesnt care about the selection in query. Like I have given the date range in PNCPE default screen. But its not filtering that data at all. It pulling up the employees regardless of date, it behaves the same for field action type (P0000-MASSn). The surprising thing is that for company code its working fine. My question is that Why PNPCE standard screen-selection not filtering data in ABAP query.
Did any one of you also experience that?

FYI
I also find an OSS note # 730005 but we are already on 52 Patch !!
OSS note :PNPCE: Incorrect data of infotype 0000 and 0001
Symptom
When you carry out a reprot which is based on logical database PNPCE, errors occur during the processing of infotypes 0000 and 0001.
Other terms
PNPCE, AS PERSON, P0000, P0001, data selection period, person selection period, CHECK_IT_0000_DATA_RESTRICTED, CHECK_IT_0001_DATA_RESTRICTED
Reason and Prerequisites
You start a report which is based on logical database PNPCE. In the report, infotype 0000 or 0001 is processed (that is, it was declared via the INFOTYPES statement). At event 'GET GROUP' or 'GET PERAS', the system either returns too few data records in the infotype tables or it returns data records twice.
The error (missing data records) has only occured since the implementation of Note 687004 or the import of Support Package SAPKE47028.
Solution
Implement the attached corrections. or import the corresponding Support Package.
Thanks
Saquib Khan

Hi Saquib,
Recently i am facing the same issue can u pls do reply how you have overcome this issue..The data is not getting picked up at the right time it is lately picked up by the program . Earlier it was PNP and it has been changed to PNPCE also we had implemented OSS Note 687004 and the later's Notes were also implemented but still now we are unable to track down why there is delay in picking up the records this has been happening for the past 8-10 Months(i m not sure far more before). I am finding 2 main issues,
1. we are using GET peras in PNPCE and no other event after that may be this is not fetching all the data because my selection screen does contain PERSONID where i suppose there should be GET PERSON event to define it
2. RP_READ_INFOTYPE macro while using for P0000 ,, the code in the macro is such that it fetches using P0001 also ...I suppose if there are any inconsistency between IT0 and IT1 then this might one to take care ...
kindly let me know how you have approached to resolve this issue.

ABAP Query Doubt

Hi All,
I am using the ABAP query using the infoset Logical database PNPCE.
When i select the fields for the output i am getting it. But i need to make some of the fields as mandatory in the selection screen.
How can i make it.
Regards,
Yogesh

Hello,
Go to the info set of the query.
SQ02 -> Enter the infoset name -> click on 'Change'
Go to the 'Selections' tab.
There you will find all the selction screen parameters. Double click on the selection parameter which you want to make it a mandatory field.
It will pop-up a dialog screen. On this dialog screen on the input field 'Extras'
enter the key word OBLIGATORY. Than don't forget to regenarate the infosets again.
This will solve your problem.
Regards,
A.Singh

ABAP query not returning correct number of records

Hi,
I have created an ABAP Query using logical database VFV and nodes VBRK, VBUK and VBRP.
But, after entering values for Sales Organisation ( VBRK-VKORG ), Distribution channel ( VBRK-VTWEG ) and Date ( VBRK-FKDAT), the number of records that I get are very less in number as compared to the actual number in the database.
Please give some pointers to the reason. I have set Lines 60 and Columns length - 83 and selected ALV List.
Regards,
Garima.

Hi Garima,
Please Check whether you are selecting all the Key fields in your Query.
Thanks & Regards,
Ashok kumar.

Additional field in selection screen of a abap query

Hi,
I am adding a new additional field in the selection screen through abap query(using transaction SQ02) which is of type VBRK-FKSTO.
The value entered can be 'X' or empty space.But the value which is entered in the selection screen is not getting reflected in the code.Kindly advice me on what needs to be done to capture the selection screen value in the code.
Regards,
S.Subasree

Hi
You can add new field in VFX3 selection screen as follow. In the report code we can see various explicit enahcement points provided by SAP.One of them is ENHANCEMENT-POINT sdblbddl_01 SPOTS es_sdblbddl STATIC. Here you can declare your selection screen parameters. Then in the processing i can see a call customer fucntion happening in VBSK_DISPALY which you can implement to add your logic.
Thanks
Nabheet

Error When Run ABAP Query in Different Client

Hi ABAPers,
Currently I develop ABAP Query using SQ01 / SQ02 / SQ03.
Everything goes well, and I have already test that the query work well. The query can be execute and show the result correctly.
My peer in same SAP system, but different client, run the same query. As I know that query is same with ABAP program which is client independent, can be execute across client. But then the runtime error show up.
The error said that
Exception condition "NO_POSITION_FOUND" raised.
Can anybody told me what's happened here, and how can I resolve this problem?
Thank you in advance
Regards
Hadi

Hi,
Since you are testing it in other client,i think due to data inconsistency you are getting that error.
Try to check the corresponding tables in both clients and can verify.
Cheers,
KK.

ABAP Query(HR)

I am using ABAP query using LDB. I want to fetch the record(current) within a particular dates for the corresponding pernr.
But when i gives validity dates it fetches all the record for the particular pernr.
Actually our requirement is to display only current status record for particular date periods.
Plz help.Its urgent.

Hi
use the following code
GET PERNR.
rp_provide_from_last p0001 space pnpbegda pnpendda.
this will fetch the only last record for that PERNR.
use this and see
Reward points for useful Answers
Regards
Anji

ABAP query issue when logoff error message query not created

Hi All ,
I created a ABAP query using SQ01 . I saved it and i'm able to see the output . But , if i logoff from the system and relogin again to system and trying to execute the query , it is showing an error message
" The query has not been created " Please help me , is there any settings change or i have to do any thing else ?
Thanks & Regards ,
Sabu

Hi ,
Yes you are right , when i try that way i can see , is it the correct solution ?
i have one more issue , i created the query , i can display and execute the query , but no one in the same system able to display or execute the query . What should i do .
Thanks & Regards ,
Sabu.

ABAP query using PSJ

Similar Messages

Maybe you are looking for