ABAP-QUOTQTION-MM RELATED

hi
I have faced a problem in the field QUOTATION length whose maiximum length is 10 chars only.I want to have more than 10 chars ( nearly 40 chars) to enter.
Table name : RM06E
Field : ANFNR
pl. respod soon
Thanks in advance.

i think u have to create reports like MB5B or MB51 (tcodes ).
Regards
Prabhu

Similar Messages

ABAP programing material related to BW.

Hi Experts,
Im new to BW/BI. Can anyone please tell me where I can find ABAP programing material related to BW.
Thank in advance.

I can also recommend my book [http://www.sap-hefte.de/katalog/hefte/titel/gp/titelID-1273]. It contains all the often used exits with practical examples, a long sample of the transformation and I received a lot of positive feedback. A second reworked edition that also contains the BPS and Integrated Planning is currently in work and will probably appear this fall.
Best regards
Dirk
Edited by: Dirk Herzog on Jul 20, 2008 8:38 PM

FI Reports using ABAP and their Related Tables

Hi can anyone tell me some of the commonly developed reports from FI using ABAP and their related Tables.
Thank You

You can find the details about the FI module here
http://www.sap-img.com/sap-fi.htm
Regards,
Ravi
Note : Please mark all the helpful answers

SAP ABAP HR ------career related question

Hye friends ,
Friends i have 2.5 years of experience in sap abap . My major developments are related to sap HR . i have 1 full life cycle completion of sap netweaver .
No i wanna my carrier as a SAP BAP HR .
But dear gurus from india , who has experience more than 4 years please suggest me ..
Is it right for my future to become as a SAP ABAP HR or i should try for simple SAP ABAP..
<<removed_by_moderator>>
Over all i am very confused related to my new search criteriaa ..wheather SAP ABA HR or SAP ABAP.
Thanks in advance For Your Reply
Edited by: Vijay Babu Dudla on Jul 2, 2009 1:45 AM

> No i wanna my carrier as a SAP BAP HR .
@PK..it is not a New Technology but a New Airlines which was introduced by SAP .
>But dear gurus from india , who has experience more than 4 years please suggest me ..
@Siegfried.. the criteria to reply to this thread does not suit you.
1.Gurus from India only.
2.Only 4 yrs Experience
>Over all i am very confused related to my new search criteriaa ..
Yep,New Version of SDN has changed its Search functionality and there is a [lot of discussions|What happened to SCN search?; going on in [Suggestions & Comments|SCN Support; forum, have a look into it.
> if a glass is half filled and half full .......try to see the full part ??
again you missed out something here which made the confusion. half filled with air & half full of water Brittania 50:50 right?.
Cheers
Andrew
PS:Edited with a SIMPLE EDIT SW called @FUN and copyrighted only for Coffee Corner.Take it in the [right spirit|http://www.whiskymag.com/whisky/brand/glenfiddich/whisky651.html] .
Edited by: Andrew J on Jul 3, 2009 9:35 AM

Pass pernr from employee search iView to abap webDynpro in Related Activity

Hi All,
I have seen many threads explaining how to pass pernr from employee search iView to custom ABAP webDynpro application in the "Employee profile" page. Also seen sap note 1112733.
I am trying to launch custom ABAP webDynpro application from "Related Activities" view found in the employee information page in MSS. I want to pass pernr selected from Employee Search iView to the ABAP webDynpro application in "Related Activities" view.
In the ABAP webDynpro application, I am listening to the portal event (as per note 1112733) but the ABAP webDynpro can not catch the event.
Anyone has passed pernr from employee search iView to the ABAP webDynpro application launched from "related activities" view?
Regards
Ashutosh

Hi Ashutosh,
can you tell me exactly what you did? I have the same issue.
Thanks,
Joeri

WD ABAP Iviews under Related Activities

Hi,
I am trying to include standard WD ABAP Iview under ESS in MSS under Team Workset. However it is not working the same way as WD Java Iviews does. Instaed of picking selected Employee's page, it is displaying Manager's page. I have also maintained PCD which starts with EXROLES. Still it is not working. I have been trying for Travel Request WD ABAP Iview.
So could anybody please let me know as to how to resolve this.
Thanks!

Hi,
In order to retrieve the selected pernr, you have to create a Web Dynpro Java iView, a resource and a service as explained in this topic : MSS - General Information - Related Activities Links persnr.
1. create a Web Dynpro Java iView using the mss~hras RelatedActivitiesLauncherApp application then open the iView and indicate the name of the service corresponding to your Web Dynpro Abap application.
2. create a new resource and indicate the id of the Web Dynpro Java iView (ROLES://portal_content...) in the URL of PCD page field
3. create a new service (service type Web Dynpro Java) and link it to the resource you just created
4. assign the new service to the subarea
Regards,
Pierre

Need OO ABAP technical terms relations

Hi Experts,
I am new to OO ABAP, i want to know some of the technical terms are related in OO ABAP.
1. Class.
2. Interface.
3. Method.
4. Object.
5. Instance.
6. Implementation class.
7. Attributes.
8. Events.
9. Aliases.
10. Parameters.
11. Exceptions.
12.Static method.
I want to know how these are things are hierarchically linked to one another. Is there any block diagram to easily understand this concept. I have seen all these inside a class. Can give me some example.
Thanks & Regards,
Ravi.

Hi,
A very good WIki on ABAP object and a solution to all your doubts can be found
https://www.sdn.sap.com/irj/scn/wiki?path=/display/abap/abap+objects
If link doesn't open then simply select the Wiki link->ABAP DEVELOPMENT->ABAPOBJECTS
This wiki is posted by Added by Marcelo Ramos so can be searched by his name also(if link doesn't work)
Hope this wiki help you out in understanding the concepts .
Pooja
Edited by: Pooja Gupta on Mar 16, 2009 9:54 AM

SAP ABAP secure coding related training session

Hi Experts,
Do you know of any training or code jams provided by SAP for organizations related to SAP ABAP secure coding?

Thanks Alex for your reply.
The course and goals look perfect.
But I was looking for something that could be arranged in my company's Mumbai(India) office.
Can anyone help me with any classroom/virtual training or Code Jams related to secure ABAP programming.

How OO ABAP & ABAP WEBDYNPROS are Related??

HI,
i am new to WEBDYNPRO and shifting myself from OO ABAP to WEBDYNPRO IN ABAP.
Kindly let me know how OO ABAP and webdynpro ARE INTERRELATED.(in terms of coding or in terms of environment)
Regards,
Dev

Hi Dev,
Welcome to ABAP Dynpro!
Now I am 10 months old to ABAP Dynpro.I have explored a lot.Now you were asking about how much ABAP/OOPS one should know and topics one should know.
In my view you should be aware with fundamental of OOABAP like
class , methods , interfaces and static attribute.Being WD ABAP Dynpro guy you should be in position to use ABAP classes and methods in it.
Just take case if you want to access element from node in context ...such code by wizard Appears ....
DATA:
zobj_bbp_ior_util TYPE REF TO zcl_bbp_ior_util,
node_ztiornode TYPE REF TO if_wd_context_node,
elem_ztiornode TYPE REF TO if_wd_context_element,
stru_ztiornode TYPE zsior.
navigate from <CONTEXT> to <ZTIORNODE> via lead selection
node_ztiornode = wd_context->get_child_node( name = if_request_ior=>wdctx_ztiornode ).
get element via lead selection
elem_ztiornode = node_ztiornode->get_element( 1 ).
now you should be in position to understand and make use of classes like
' wd_context' etc. .You should know what it does then you will use it method
like get_child_no.
Hope I have cleared you doubt.
Cheers,
Darshna.

Unbelievable ABAP oddity - SapScript related

Sappers,
I have officially come across the oddest ABAP problem that I have seen in 8 years. I've spent 8+ hours trying every possible code variation to get around it but nothing works.
Here's the story in summary.
We have an invoice with shipping fields NAME1, NAME2, NAME3, and NAME4. Under certain circumstances we need NAME1 to use a different field.
Our user-exit has worked perfectly since 2000 and is now acting odd after an upgrade to ERP6.
If I print a specific invoice, I get (using example data)
COMPANY NAME
123 STREET ADDRESS
CITY NAME ST 99999-0000
In the user exit the field NAME1 = 'COMPANY NAME'. I need it to say 'ALTERNATE COMPANY NAME' which resides in table ADRC. No problem, I pull that data into a variable and then overlay want is in the NAME1 var with what it in the ALT_NAME1 var so that NAME1 now says 'ALTERNATE COMPANY'. Great, no problems.
Here's the weird part. I don't expect you to believe me right off but please understand that I have gone through literally 50+ iterations to find out how to get around this behavior.
Printing the invoice ... I get.
123 STREET ADDRESS
CITY NAME ST 99999-0000
Whoops. Where did ALTERNATE COMPANY go? Let's try setting NAME1 to a hard-coded value like 'XXXXXXXXXX'.
Printing the invoice ... I get.
XXXXXXXXXXX
123 STREET ADDRESS
CITY NAME ST 99999-0000
Ok, we know the data element is getting through so why is the value 'ALTERNATE COMPANY' not making it to the form? Let's try this...
Rather than use the value of 'ALTERNATE COMPANY' that came in from ADRC instead I hard code NAME1 = 'ALTERNATE COMPANY'. A literal.
Printing the invoice ... I get.
ALTERNATE COMPANY
123 STREET ADDRESS
CITY NAME ST 99999-0000
What the?! It prints the value when I hard code the value but not when the same value comes from the database? True. I have tried every manner of manipulation on the NAME1 variable with no change in the behavior.
Here's a really odd behavior.
CONCATENATE 'X' NAME1 'Y' INTO NAME1.
At this point NAME1's value is 'XALTERNATE COMPANYY'.
Printing the invoice ... I get ... believe it ...
XY
123 STREET ADDRESS
CITY NAME ST 99999-0000
If I compare the value 'ALTERNATE COMPANY' that came from ADRC against a varaible with the literal 'ALTERNATE COMPANY' they are the same length and the hex codes are exactly the same as they should be. How in the name of all that is pure and good can ABAP print XY when the variable contains 'XALTERNATE COMPANYY' ?! Is this some kind of cruel unicode joke?
<< Removed >>
Thanks all,
Crew
Edited by: Rob Burbank on Apr 16, 2009 2:59 PM

My SapScript experience is not deep so I'm just going to show you the code from the invoice form.
/* ENDIF.
/: ADDRESS DELIVERY PARAGRAPH ZD
/*    TITLE    &VBDKR-ANRED_WE&
/:    NAME     &VBDKR-NAME1_WE&, &VBDKR-NAME2_WE&, &VBDKR-NAME3_WE&,
/:    STREET   &VBDKR-STRAS_WE&
/:    POSTCODE &VBDKR-PSTLZ_WE&
/:    CITY     &VBDKR-ORT01_WE&, &VBDKR-ORT02_WE&
/:    REGION   &VBDKR-REGIO_WE&
/:    COUNTRY &VBDKR-LAND1_WE&
/:    FROMCOUNTRY &VBDKR-SLAND&
/: ENDADDRESS
The variables I'm working with in the user-exit are eventually dumped into some print program's VBDKR structure. &VBDKR-NAME1_WE& is the field that I am affecting from the user-exit. I have full control of that field from the user exit as descibed in my post. If I poke in 'XXX' then 'XXX' makes it to &VBDKR-NAME1_WE& and prints. If I poke in the value that came from a database (verfied to be present) then &VBDKR-NAME1_WE& prints nothing. See my comment about concatenating a literal to the front and back of the database value. Only the literals X and Y print from that whole string. Something is definitely amiss.
Thanks,
Crew

ABAP Report MM related questin

what is the meaning of <b>STOCK RECONCILLIATION</b> REPORT means according to <b>MM</b> flow .
WHAT IS THE PURPOSE TO CREATE THIS REPORT?

i think u have to create reports like MB5B or MB51 (tcodes ).
Regards
Prabhu

Consuming webservice in ABAP Webdynpro

Hi all,
I am using SAP ECC 5.0.Can I consume External webservices using ABAP Dynpro.Sending related links will be highly appreciated.
Regards
Sandeep.S

the thread is marked as answered? is it resolved or are you still looking for an answer

About ABAP Technical Systems and Business Systems

Hi experts,
I have an Integration scenary with XI and an R3 vía RFC. I've already created it in the development environment and when I'm going to transport to Consolidation and Production I find that the ABAP Business System related to the ABAP Technical System of the R3 have a different name from the development one.
In the Integration Repository everything its OK because my scenario is developped on a third party system BS and TS. The problem is in the Directory because of the BS of the Message interfaces....
I think that transport Directory scenario with .tpt wont work. I'll probably have to develop it in each environment... What do you think?
Regards
Gonzalo

This is what you need to do to move from Dev to QA.
1. Go to Dev SLD and Export all your SWCV, Products, Technical and Business Systems. This is nothing but saving of the SLD objects as a CIM file on your local machine. You would also need to export the Technical And Business System poitning to your XI integration server .
2. Go to the QA SLD and then import these objects exported in Step 1 in QA SLD
3. Now, create the QA Tech and Business Systems in the QA SLD
4. Go to the Dev Business systems imported on the QS SLD and you will have an option Transport Targets. In this map the Source Business System to the Target Business Systems.
Make sure that all Dev Business Systems have the correspodning Transport Targets for the QA Business SYstems
5. Now if you import the ID objects in QA , the business systems name will be renamed automatically.
Regards
Bhavesh

Profit Center Hierarchy Level in ABAP-HR

I am working on an ABAP-HR report related to Organisation management.
There is a requirement wherein I need to retrieve data from a Profit Center Hierarchy Level .Can u please advice me on this.
Thanks in advance,
Raja.

Hi ,
(i_name is the entered profit center group name)
Get the internal name of the entered profit center hierarchy.
CALL FUNCTION 'G_SET_LIST_SELECT'
       EXPORTING
            SETCLASS      = '0106'
            SHORTNAME     = I_NAME
            KOKRS         = 'MIT '
            KTOPL         = 'HEUS'
       TABLES
            MATCHING_SETS = T_SETLIST.
IF T_SETLIST[] IS INITIAL.
    MESSAGE E002(SY) WITH 'Profit Center group does not exist'.
    EXIT.
ELSE.
    READ TABLE T_SETLIST INDEX 1.
ENDIF.
Get the entered profit center hierarchy info.
CALL FUNCTION 'G_SET_TREE_IMPORT'
       EXPORTING
            SETID                     = T_SETLIST-SETNAME
       TABLES
            SET_HIERARCHY             = T_SETHIER
            SET_VALUES                = T_SETVALUES
       EXCEPTIONS
            SET_NOT_FOUND             = 1
            ILLEGAL_FIELD_REPLACEMENT = 2
            ILLEGAL_TABLE_REPLACEMENT = 3
            OTHERS                    = 4.
IF SY-SUBRC <> 0.
    MESSAGE E002(SY) WITH 'Profit Center group does not exist'.
    EXIT.
ENDIF.
or try one of these
FC_PRCTR_HIERARCHY
TXW_EXTRACT_CO_PCTR_HIERARCHY
Regards,
pankaj singh.
Message edited by pankaj singh

Abap basics material documents

Hi Gurus,
i am intrested to learn basic in Abap i want to make my carrrier in it so i kindky request you to plz send material my [email protected]
Thanks in Advance,
Edited by: Krishna on Apr 23, 2008 2:16 PM
Edited by: Krishna on Apr 23, 2008 2:17 PM

Hi....
Go for Siemens material. Check the following link:
http://www.sapbrainsonline.com/TUTORIALS/TECHNICAL/ABAP_tutorial.html
additional info
ABAP is one of many application-specific fourth-generation languages (4GLs) first developed in the 1980s. It was originally the report language for SAP R/2, a platform that enabled large corporations to build mainframe business applications for materials management and financial and management accounting. ABAP used to be an abbreviation of Allgemeiner Berichtsaufbereitungsprozessor, the German meaning of "generic report preparation processor", but was later renamed to Advanced Business Application Programming. ABAP was one of the first languages to include the concept of Logical Databases (LDBs), which provides a high level of abstraction from the basic database level.
The ABAP programming language was originally used by SAP developers to develop the SAP R/3 platform. It was also intended to be used by SAP customers to enhance SAP applications customers can develop custom reports and interfaces with ABAP programming. The language is fairly easy to learn for programmers but it is not a tool for direct use by non-programmers. Good programming skills, including knowledge of relational database design and preferably also of object-oriented concepts, are required to create ABAP programs.
ABAP remains the language for creating programs for the client-server R/3 system, which SAP first released in 1992. As computer hardware evolved through the 1990s, more and more of SAP's applications and systems were written in ABAP. By 2001, all but the most basic functions were written in ABAP. In 1999, SAP released an object-oriented extension to ABAP called ABAP Objects, along with R/3 release 4.6.
SAP's most recent development platform, NetWeaver, supports both ABAP and Java.
edit Implementation
edit Where does the ABAP Program Run?
All ABAP programs reside inside the SAP database. They are not stored in separate external files like Java or C++ programs. In the database all ABAP code exists in two forms: source code, which can be viewed and edited with the ABAP workbench, and "compiled" code ("generated" code is the more correct technical term), which is loaded and interpreted by the ABAP runtime system. Code generation happens implicitly when a unit of ABAP code is first invoked. If the source code is changed later or if one of the data objects accessed by the program has changed (e.g. fields were added to a database table), then the code is automatically regenerated.
ABAP programs run in the SAP application server, under control of the runtime system, which is part of the SAP kernel. The runtime system is responsible for processing ABAP statements, controlling the flow logic of screens and responding to events (such as a user clicking on a screen button). A key component of the ABAP runtime system is the Database Interface, which turns database-independent ABAP statements ("Open SQL") into statements understood by the underlying DBMS ("Native SQL"). The database interface handles all the communication with the relational database on behalf of ABAP programs; it also contains extra features such as buffering of frequently accessed data in the local memory of the application server.
Basis
Basis sits between ABAP/4 and Operating system.Basis is like an operating system for R/3. It sits between the ABAP/4 code and the computer's operating system. SAP likes to call it middleware because it sits in the middle, between ABAP/4 and the operating system. Basis sits between ABAP/4 and the operating system. ABAP/4 cannot run directly on an operating system. It requires a set of programs (collectively called Basis) to load, interpret, and buffer its input and output. Basis, in some respects, is like the Windows environment. Windows starts up, and while running it provides an environment in which Windows programs can run. Without Windows, programs written for the Windows environment cannot run. Basis is to ABAP/4 programs as Windows is to Windows programs. Basis provides the runtime environment for ABAP/4 programs. Without Basis, ABAP/4 programs cannot run. When the operator starts up R/3, you can think of him as starting up Basis. Basis is a collection of R/3 system programs that present you with an interface. Using this interface the user can start ABAP/4 programs. To install Basis, an installer runs the program r3inst at the command-prompt level of the operating system. Like most installs, this creates a directory structure and copies a set of executables into it. These executables taken together as a unit form Basis.
To start up the R/3 system, the operator enters the startsap command. The Basis executables start up and stay running, accepting requests from the user to run ABAP/4 programs.
ABAP/4 programs run within the protective Basis environment; they are not executables that run on the operating system. Instead, Basis reads ABAP/4 code and interprets it into operating system instructions. ABAP/4 programs do not access operating system functions directly. Instead, they use Basis functions to perform file I/O and display data in windows. This level of isolation from the operating system enables ABAP/4 programs to be ported without modification to any system that supports R/3. This buffering is built right into the ABAP/4 language itself and is actually totally transparent to the programmer.
Basis makes ABAP/4 programs portable. The platforms that R/3 can run on are shown in Table. For example, if you write an ABAP/4 program on Digital UNIX with an Informix database and an OSF/Motif interface, that same program should run without modification on a Windows NT machine with an Oracle database and a Windows 95 interface. Or, it could run on an AS/400 with a DB2 database using OS/2 as the front-end.
SAP also provides a suite of tools for administering the Basis system. These tools perform tasks such as system performance monitoring, configuration, and system maintenance. To access the Basis administration tools from the main menu, choose the path Tools->Administration.
Platforms and Databases Supported by R/3
Operating Systems Supported Hardware Supported Front-Ends Supported Databases
AIX SINIX IBM SNI SUN Win 3.1/95/NT DB2 for AIX
SOLARIS HP-UX Digital HP OSF/Motif Informix-Online
Digital-UNIX Bull OS/2 Oracle 7.1
Windows NT AT&T Compaq Win 3.1/95/NT Oracle 7.1
Bull/Zenith OSF/Motif SQL Server 6.0
HP (Intel) SNI OS/2 ADABAS D
OS/400 AS/400 Win95 OS/2 DB2/400
edit SAP Systems and Landscapes
All SAP data exists and all SAP software runs in the context of an SAP system. A system consists of a central relational database and one or more application servers ("instances") accessing the data and programs in this database. A SAP system contains at least one instance but may contain more, mostly for reasons of sizing and performance. In a system with multiple instances, load balancing mechanisms ensure that the load is spread evenly over the available application servers.
Installations of the Web Application Server (landscapes) typically consist of three systems: one for development, one for testing and quality assurance, and one for production. The landscape may contain more systems, e.g. separate systems for unit testing and pre-production testing, or it may contain fewer, e.g. only development and production, without separate QA; nevertheless three is the most common configuration. ABAP programs are created and undergo first testing in the development system. Afterwards they are distributed to the other systems in the landscape. These actions take place under control of the Change and Transport System (CTS), which is responsible for concurrency control (e.g. preventing two developers from changing the same code at the same time), version management and deployment of programs on the QA and production systems.
The Web Application Server consists of three layers: the database layer, the application layer and the presentation layer. These layers may run on the same or on different physical machines. The database layer contains the relational database and the database software. The application layer contains the instance or instances of the system. All application processes, including the business transactions and the ABAP development, run on the application layer. The presentation layer handles the interaction with users of the system. Online access to ABAP application servers can go via a proprietary graphical interface, the SAPGUI, or via a Web browser.
edit Transactions
We call an execution of an ABAP program using a transaction code a transaction. There are dialog, report, parameter, variant, and as of release 6.10, OO transactions. A transaction is started by entering the transaction code in the input field on the standard toolbar, or by means of the ABAP statements CALL TRANSACTION or LEAVE TO TRANSACTION. Transaction codes can also be linked to screen elements or menu entries. Selecting such an element will start the transaction.
A transaction code is simply a twenty-character name connected with a Dynpro, another transaction code, or, as of release 6.10, a method of an ABAP program. Transaction codes linked with Dynpros are possible for executable programs, module pools, and function groups. Parameter transactions and variant transactions are linked with other transaction codes. Transaction codes that are linked with methods are allowed for all program types that can contain methods. Transaction codes are maintained in transaction SE93.
So, a transaction is nothing more than the SAP way of program executionbut why is it called transaction? ABAP is a language for business applications and the most important features of business applications were and still are are transactions. Since in the early days of SAP, the execution of a program often meant the same thing as carrying out a business transaction, the terms transaction and transaction code were chosen for program execution. But never mix up the technical meaning of a transaction with business transactions. For business transactions, it is the term LUW (Logical Unit of Work) that counts. And during one transaction (program execution), there can be many different LUWs.
Lets have a look at the different kind of transactions:
edit Dialog Transaction
These are the most common kind of transactions. The transaction code of a dialog transaction is linked to a Dynpro of an ABAP program. When the transaction is called, the respective program is loaded and the Dynpro is called. Therefore, a dialog transaction calls a Dynpro sequence rather than a program. Only during the execution of the Dynpro flow logic are the dialog modules of the ABAP program itself are called. The program flow can differ from execution to execution. You can even assign different dialog transaction codes to one program.
edit Parameter Transaction
In the definition of a parameter transaction code, a dialog transaction is linked with parameters. When you call a parameter transaction, the input fields of the initial Dynpro screen of the dialog transaction are filled with parameters. The display of the initial screen can be inhibited by specifying all mandatory input fields as parameters of the transaction.
edit Variant Transaction
In the definition of a variant transaction code, a dialog transaction is linked with a transaction variant. When a variant transaction is accessed, the dialog transaction is called and executed with the transaction variant. In transaction variants, you can assign default values to the input fields on several Dynpro screens in a transaction, change the attributes of screen elements, and hide entire screens. Transaction variants are maintained in transaction SHD0.
edit Report Transaction
A report transaction is the transaction code wrapping for starting the reporting process. The transaction code of a report transaction must be linked with the selection screen of an executable program. When you execute a report transaction, the runtime environment internally executes the ABAP statement SUBMITmore to come on that.
edit OO Transaction
A new kind of transaction as of release 6.10. The transaction code of an OO transaction is linked with a method of a local or global class. When the transaction is called, the corresponding program is loaded, for instance methods an object of the class is generated and the method is executed.
edit Types of ABAP programs
In ABAP, there are two different types of programs:
edit Report programs(Executable pools)
A Sample ReportReport programs AKA Executable pools follow a relatively simple programming model whereby a user optionally enters a set of parameters (e.g. a selection over a subset of data) and the program then uses the input parameters to produce a report in the form of an interactive list. The output from the report program is interactive because it is not a passive display; instead it enables the user, through ABAP language constructs, to obtain a more detailed view on specific data records via drill-down functions, or to invoke further processing through menu commands, for instance to sort the data in a different way or to filter the data according to selection criteria. This method of presenting reports has great advantages for users who must deal with large quantities of information and must also have the ability to examine this information in highly flexible ways, without being constrained by the rigid formatting or unmanageable size of "listing-like" reports. The ease with which such interactive reports can be developed is one of the most striking features of the ABAP language.
The term "report" is somewhat misleading in the sense that it is also possible to create report programs that modify the data in the underlying database instead of simply reading it.
A customized screen created using Screen Painter,which is one of the tool available in ABAP workbench(T-code = SE51).
edit Online programs
Online programs (also called module pools) do not produce lists. These programs define more complex patterns of user interaction using a collection of screens. The term screen refers to the actual, physical image that the users sees. Each screen also has a flow logic; this refers to the ABAP code invoked by the screens, i.e. the logic that initializes screens, responds to a users requests and controls the sequence between the screens of a module pool. Each screen has its own Flow Logic, which is divided into a "PBO" (Process Before Output) and "PAI" (Process After Input) section. In SAP documentation the term dynpro (dynamic program) refers to the combination of the screen and its Flow Logic.
Online programs are not invoked directly by their name, but are associated with a transaction code. Users can then invoke them through customizable, role-dependent, transaction menus.
Apart from reports and online programs, it is also possible to develop sharable code units such as class libraries, function libraries and subroutine pools.
edit Subroutine Pools
Subroutine pools, as the name implies, were created to contain selections of subroutines that can be called externally from other programs. Before release 6.10, this was the only way subroutine pools could be used. But besides subroutines, subroutine pools can also contain local classes and interfaces. As of release 6.10, you can connect transaction codes to methods. Therefore, you can now also call subroutine pools via transaction codes. This is the closest to a Java program you can get in ABAP: a subroutine pool with a class containing a method say main connected to a transaction code!
edit Type Pools
Type pools are the precursors to general type definitions in the ABAP Dictionary. Before release 4.0, only elementary data types and flat structures could be defined in the ABAP Dictionary. All other types that shouldve been generally available had to be defined with TYPES in type pools. As of release 4.0, type pools were only necessary for constants. As of release 6.40, constants can be declared in the public sections of global classes and type pools can be replaced by global classes.
edit Class Pools
Class pools serve as containers for exactly one global class. Besides the global class, they can contain global types and local classes/interfaces to be used in the global class. A class pool is loaded into memory by using one of its components. For example, a public method can be called from any ABAP program or via a transaction code connected to the method. You maintain class pools in the class builder.
edit Interface Pools
Interface pools serve as containers for exactly one global interfacenothing more and nothing less. You use an interface pool by implementing its interface in classes and by creating reference variables with the type of its interface. You maintain interface pools in the class builder.
edit ABAP Workbench
The ABAP Workbench contains different tools for editing Repository objects. These tools provide you with a wide range of assistance that covers the entire software development cycle. The most important tools for creating and editing Repository objects are:
ABAP Editor for writing and editing program code
ABAP Dictionary for processing database table definitions and retrieving global types
Menu Painter for designing the user interface (menu bar, standard toolbar, application toolbar, function key assignment)
Screen Painter for designing screens (dynamic programs) for user dialogs
Function Builder for displaying and processing function modules (routines with defined interfaces that are available throughout the system)
Class Builder for displaying and processing ABAP Objects classes
edit The ABAP Dictionary
Enforces data integrity
Manages data definitions without redundancy
Is tightly integrated with the rest of the ABAP/4 Development Workbench.
Enforcing data integrity is the process of ensuring that data entered into the system is logical, complete, and consistent. When data integrity rules are defined in the ABAP/4 Dictionary, the system automatically prevents the entry of invalid data. Defining the data integrity rules at the dictionary level means they only have to be defined once, rather than in each program that accesses that data.
The following are examples of data lacking integrity:
A date field with a month value of 13
An order assigned to a customer number that doesnt exist
An order not assigned to a customer
Managing data definitions without redundancy is the process of linking similar information to the same data definition. For example, a customer database is likely to contain a customers ID number in several places. The ABAP Dictionary provides the capability of defining the characteristics of a customer ID number in only one place. That central definition then can be used for each instance of a customer ID number.
The ABAP Dictionarys integration with the rest of the development environment enables ABAP programs to automatically recognize the names and characteristics of dictionary objects.
Additionally, the system provides easy navigation between development objects and dictionary definitions. For example, as a programmer, you can double-click on the name of a dictionary object in your program code, and the system will take you directly to the definition of that object in the ABAP/4 Dictionary.
When a dictionary object is changed, a program that references the changed object will automatically reference the new version the next time the program runs. Because ABAP is interpreted, it is not necessary to recompile programs that reference changed dictionary objects.
edit ABAP Syntax
The syntax of the ABAP programming language consists of the following elements:
Statements
An ABAP program consists of individual ABAP statements. Each statement begins with a keyword and ends with a period.
edit "Hello World" PROGRAM
WRITE 'Hello World'.
This example contains two statements, one on each line. The keywords are PROGRAM and WRITE. The program displays a list on the screen. In this case, the list consists of the line "My First Program".
The keyword determines the category of the statement. For an overview of the different categories, refer to ABAP Statements.
edit Formatting ABAP Statements
ABAP has no format restrictions. You can enter statements in any format, so a statement can be indented, you can write several statements on one line, or spread a single statement over several lines.
You must separate words within a statement with at least one space. The system also interprets the end of line marker as a space.
The program fragment
PROGRAM TEST.
WRITE 'This is a statement'.
could also be written as follows:
PROGRAM TEST. WRITE 'This is a statement'.
or as follows:
PROGRAM
TEST.
WRITE
'This is a statement'.
Use this free formatting to make your programs easier to understand.
edit Special Case: Text Literals
Text literals are sequences of alphanumeric characters in the program code that are enclosed in quotation marks. If a text literal in an ABAP statement extends across more than one line, the following difficulties can occur:
All spaces between the quotation marks are interpreted as belonging to the text literal. Letters in text literals in a line that is not concluded with quotation marks are interpreted by the editor as uppercase. If you want to enter text literals that do not fit into a single line, you can use the & character to combine a succession of text literals into a single one.
The program fragment
PROGRAM TEST.
WRITE 'This
is
a statement'.
inserts all spaces between the quotation marks into the literal, and converts the letters to uppercase.
This program fragment
PROGRAM TEST.
WRITE 'This' &
' is ' &
'a statement'.
combines three text literals into one.
edit Chained Statements
The ABAP programming language allows you to concatenate consecutive statements with an identical first part into a chain statement.
To concatenate a sequence of separate statements, write the identical part only once and place a colon ( after it. After the colon, write the remaining parts of the individual statements, separating them with commas. Ensure that you place a period (.) after the last part to inform the system where the chain ends.
Statement sequence:
WRITE SPFLI-CITYFROM.
WRITE SPFLI-CITYTO.
WRITE SPFLI-AIRPTO.
Chain statement:
WRITE: SPFLI-CITYFROM, SPFLI-CITYTO, SPFLI-AIRPTO.
In the chain, a colon separates the beginning of the statement from the variable parts. After the colon or commas, you can insert any number of spaces.
You could, for example, write the same statement like this:
WRITE: SPFLI-CITYFROM,
SPFLI-CITYTO,
SPFLI-AIRPTO.
In a chain statement, the first part (before the colon) is not limited to the keyword of the statements.
Statement sequence:
SUM = SUM + 1.
SUM = SUM + 2.
SUM = SUM + 3.
SUM = SUM + 4.
Chain statement:
SUM = SUM + : 1, 2, 3, 4.
edit Comments
Comments are texts that you can write between the statements of your ABAP program to explain their purpose to a reader. Comments are distinguished by the preceding signs * (at the beginning of a line) and " (at any position in a line). If you want the entire line to be a comment, enter an asterisk (*) at the beginning of the line. The system then ignores the entire line when it generates the program. If you want part of a line to be a comment, enter a double quotation mark (") before the comment. The system interprets comments indicated by double quotation marks as spaces.
PROGRAM SAPMTEST *
WRITTEN BY KARL BYTE, 06/27/1995 *
LAST CHANGED BY RITA DIGIT, 10/01/1995 *
TASK: DEMONSTRATION *
PROGRAM SAPMTEST.
DECLARATIONS *
DATA: FLAG " GLOBAL FLAG
NUMBER TYPE I " COUNTER
PROCESSING BLOCKS *
Advantages of ABAP over Contemporary languages
ABAP OBJECTS
Object orientation in ABAP is an extension of the ABAP language that makes available the advantages of object-oriented programming, such as encapsulation, interfaces, and inheritance. This helps to simplify applications and make them more controllable.
ABAP Objects is fully compatible with the existing language, so you can use existing statements and modularization units in programs that use ABAP Objects, and can also use ABAP Objects in existing ABAP programs.
edit ABAP Statements an Overview
The first element of an ABAP statement is the ABAP keyword. This determines the category of the statement. The different statement categories are as follows:
edit Declarative Statements
These statements define data types or declare data objects which are used by the other statements in a program or routine. The collected declarative statements in a program or routine make up its declaration part.
Examples of declarative keywords:
TYPES, DATA, TABLES
edit Modularization Statements
These statements define the processing blocks in an ABAP program.
The modularization keywords can be further divided into:
· Defining keywords
You use statements containing these keywords to define subroutines, function modules, dialog modules and methods. You conclude these processing blocks using the END statements.
Examples of definitive keywords:
METHOD ... ENDMETHOD, FUNCTION ... ENDFUNCTION, MODULE ... ENDMODULE.
· Event keywords
You use statements containing these keywords to define event blocks. There are no special statements to conclude processing blocks - they end when the next processing block is introduced.
Examples of event key words:
AT SELECTION SCREEN, START-OF-SELECTION, AT USER-COMMAND
edit Control Statements
You use these statements to control the flow of an ABAP program within a processing block according to certain conditions.
Examples of control keywords:
IF, WHILE, CASE
edit Call Statements
You use these statements to call processing blocks that you have already defined using modularization statements. The blocks you call can either be in the same ABAP program or in a different program.
Examples of call keywords:
CALL METHOD, CALL TRANSACTION, SUBMIT, LEAVE TO
Operational Statements These keywords process the data that you have defined using declarative statements.
Examples of operational keywords:
MOVE, ADD
edit Unique Concept of Internal Table in ABAP
Internal tables provide a means of taking data from a fixed structure and storing it in working memory in ABAP. The data is stored line by line in memory, and each line has the same structure. In ABAP, internal tables fulfill the function of arrays. Since they are dynamic data objects, they save the programmer the task of dynamic memory management in his or her programs. You should use internal tables whenever you want to process a dataset with a fixed structure within a program. A particularly important use for internal tables is for storing and formatting data from a database table within a program. They are also a good way of including very complicated data structures in an ABAP program.
Like all elements in the ABAP type concept, internal tables can exist both as data types and as data objects A data type is the abstract description of an internal table, either in a program or centrally in the ABAP Dictionary, that you use to create a concrete data object. The data type is also an attribute of an existing data object.
edit Internal Tables as Data Types
Internal tables and structures are the two structured data types in ABAP. The data type of an internal table is fully specified by its line type, key, and table type.
edit Line type
The line type of an internal table can be any data type. The data type of an internal table is normally a structure. Each component of the structure is a column in the internal table. However, the line type may also be elementary or another internal table.
edit Key
The key identifies table rows. There are two kinds of key for internal tables - the standard key and a user-defined key. You can specify whether the key should be UNIQUE or NON-UNIQUE. Internal tables with a unique key cannot contain duplicate entries. The uniqueness depends on the table access method.
If a table has a structured line type, its default key consists of all of its non-numerical columns that are not references or themselves internal tables. If a table has an elementary line type, the default key is the entire line. The default key of an internal table whose line type is an internal table, the default key is empty.
The user-defined key can contain any columns of the internal table that are not references or themselves internal tables. Internal tables with a user-defined key are called key tables. When you define the key, the sequence of the key fields is significant. You should remember this, for example, if you intend to sort the table according to the key.
edit Table type
The table type determines how ABAP will access individual table entries. Internal tables can be divided into three types:
Standard tables have an internal linear index. From a particular size upwards, the indexes of internal tables are administered as trees. In this case, the index administration overhead increases in logarithmic and not linear relation to the number of lines. The system can access records either by using the table index or the key. The response time for key access is proportional to the number of entries in the table. The key of a standard table is always non-unique. You cannot specify a unique key. This means that standard tables can always be filled very quickly, since the system does not have to check whether there are already existing entries.
Sorted tables are always saved sorted by the key. They also have an internal index. The system can access records either by using the table index or the key. The response time for key access is logarithmically proportional to the number of table entries, since the system uses a binary search. The key of a sorted table can be either unique or non-unique. When you define the table, you must specify whether the key is to be unique or not. Standard tables and sorted tables are known generically as index tables.
Hashed tables have no linear index. You can only access a hashed table using its key. The response time is independent of the number of table entries, and is constant, since the system access the table entries using a hash algorithm. The key of a hashed table must be unique. When you define the table, you must specify the key as UNIQUE.
edit Generic Internal Tables
Unlike other local data types in programs, you do not have to specify the data type of an internal table fully. Instead, you can specify a generic construction, that is, the key or key and line type of an internal table data type may remain unspecified. You can use generic internal tables to specify the types of field symbols and the interface parameters of procedures . You cannot use them to declare data objects.
edit Internal Tables as Dynamic Data Objects
Data objects that are defined either with the data type of an internal table, or directly as an internal table, are always fully defined in respect of their line type, key and access method. However, the number of lines is not fixed. Thus internal tables are dynamic data objects, since they can contain any number of lines of a particular type. The only restriction on the number of lines an internal table may contain are the limits of your system installation. The maximum memory that can be occupied by an internal table (including its internal administration) is 2 gigabytes. A more realistic figure is up to 500 megabytes. An additional restriction for hashed tables is that they may not contain more than 2 million entries. The line types of internal tables can be any ABAP data types - elementary, structured, or internal tables. The individual lines of an internal table are called table lines or table entries. Each component of a structured line is called a column in the internal table.
edit Choosing a Table Type
The table type (and particularly the access method) that you will use depends on how the typical internal table operations will be most frequently executed.
edit Standard tables
This is the most appropriate type if you are going to address the individual table entries using the index. Index access is the quickest possible access. You should fill a standard table by appending lines (ABAP APPEND statement), and read, modify and delete entries by specifying the index (INDEX option with the relevant ABAP command). The access time for a standard table increases in a linear relationship with the number of table entries. If you need key access, standard tables are particularly useful if you can fill and process the table in separate steps. For example, you could fill the table by appending entries, and then sort it. If you use the binary search option with key access, the response time is logarithmically proportional to the number of table entries.
edit Sorted tables
This is the most appropriate type if you need a table which is sorted as you fill it. You fill sorted tables using the INSERT statement. Entries are inserted according to the sort sequence defined through the table key. Any illegal entries are recognized as soon as you try to add them to the table. The response time for key access is logarithmically proportional to the number of table entries, since the system always uses a binary search. Sorted tables are particularly useful for partially sequential processing in a LOOP if you specify the beginning of the table key in the WHERE condition.
edit Hashed tables
This is the most appropriate type for any table where the main operation is key access. You cannot access a hashed table using its index. The response time for key access remains constant, regardless of the number of table entries. Like database tables, hashed tables always have a unique key. Hashed tables are useful if you want to construct and use an internal table which resembles a database table or for processing large amounts of data.
edit Advanced Topics
edit Batch Input: Concepts
Processing Sessions
The above figure shows how a batch input session works.A batch input session is a set of one or more calls to transactions along with the data to be processed by the transactions. The system normally executes the transactions in a session non-interactively, allowing rapid entry of bulk data into an R/3 System.
A session records transactions and data in a special format that can be interpreted by the R/3 System. When the System reads a session, it uses the data in the session to simulate on-line entry of transactions and data. The System can call transactions and enter data using most of the facilities that are available to interactive users.
For example, the data that a session enters into transaction screens is subject to the same consistency checking as in normal interactive operation. Further, batch input sessions are subject to the user-based authorization checking that is performed by the system.
edit Advantages of ABAP over Contemporary languages
ABAP Objects offers a number of advantages, even if you want to continue using procedural programming. If you want to use new ABAP features, you have to use object-oriented interfaces anyway.
Sharing Data: With ABAP shared objects, you can aggregate data once at a central location and the different users and programs can then access this data without the need for copying.
Exception Handling: With the class-based exception concept of ABAP, you can define a special control flow for a specific error situation and provide the user with information about the error.
Developing Persistency: For permanent storage of data in ABAP, you use relational database tables by means of database-independent Open SQL, which is integrated in ABAP. However, you can also store selected objects transparently or access the integrated database or other databases using proprietary SQL.
Connectivity and Interoperability: The Exchange Infrastructure and Web services are the means by which developers can implement a service-oriented architecture. With Web services, you can provide and consume services independently of implementation or protocol. Furthermore, you can do so within NetWeaver and in the communication with other systems. With the features of the Exchange Infrastructure, you can enable, manage, and adapt integration scenarios between systems.
Making Enhancements: With the Enhancement Framework, you can enhance programs, function modules, and global classes without modification as well as replace existing code. The Switch Framework enables you activate only specific development objects or enhancements in a system.
edit Considerable Aspects
It follows a list of aspects to be considered during development. The list of course is not complete.
edit Dynpro persistence
When implementing dynpros one has to care for himself to read out and persist the necessary fields. Recently it happened to me that I forgot to include a field into the UPDATE-clause which is an error not so easy to uncover if you have other problems to be solved in the same package. Here, tool-support or built-in mechanisms would help.
The developer could help himself out by creating something like a document containing a cookbook or guide in which parts of a dynpro logic one has to care about persistence. With that at hand, it would be quite easy finding those bugs in short time. Maybe a report scanning for the definition of the dynpro fields to be persisted could scan the code automatically, too.
edit Memory Cache
It should be common-sense that avoiding select-statements onto the database helps reducing the server load. For that the programmer either can resort to function modules if available. This maybe is the case for important tables. Or the programmer needs to implement his own logic using internal tables. Here, the standard software package could provide the developer with a tool or a mechanism auto-generating memory cached tables resp. function modules implementing this.
Sometimes buffering of database tables could be used, if applicable. But that would require an effort in customizing the system and could drain down system performance overall, especially if a table is involved that has a central role.
edit Interfaces
It should be noticed that some function modules available have an incomplete interface. That means, the interface does not include all parameters evaluated by the logic of the function module. For example, global variables from within the function group could be read out, which cannot be influenced by the general caller. Or memory parameters are used internally to feed the logic with further information.
One workaround here would be copying the relevant parts of the logic to a newly created function module and then adapt it to the own context. This sometimes is possible, maybe if the copied code is not too lengthy and only a few or no calls to other logic is part of it.
A modification of the SAP code could be considered, if the modification itself is unavoidable (or another solution would be not justifiable by estimated effort to spend on it) and if the location of the modification seems quite safe against future upgrades or hot fixes. The latter is something that could be evaluated by contacting the SAP hotline or working with OSS message (searching thru existing one, perhaps open a new one).
edit Example
'From SAP NetWeaver:'
set an exclusive lock at level object-type & object-id
IF NOT lf_bapi_error = true.
IF ( NOT istourhd-doc_type IS INITIAL ) AND
( NOT istourhd-doc_id IS INITIAL )
CALL FUNCTION 'ENQUEUE_/DSD/E_HH_RAREF'
EXPORTING
obj_typ = istourhd-doc_type
obj_id = istourhd-doc_id
EXCEPTIONS
foreign_lock = 1
system_failure = 2
OTHERS = 3.
IF sy-subrc 0.
terminate processing...
lf_bapi_error = true.
...and add message to return table
PERFORM set_msg_to_bapiret2
USING sy-msgid gc_abort sy-msgno
sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
gc_istourhd gc_enqueue_refdoc space
CHANGING lt_return.
ENDIF.
ENDIF.
ENDIF. " bapi error
edit Example Report(Type - ALV(Advanced List Viewer))
REPORT Z_ALV_SIMPLE_EXAMPLE_WITH_ITAB .
*Simple example to use ALV and to define the ALV data in an internal
*table
*data definition
tables:
marav. "Table MARA and table MAKT
Data to be displayed in ALV
Using the following syntax, REUSE_ALV_FIELDCATALOG_MERGE can auto-
matically determine the fieldstructure from this source program
Data:
begin of imat occurs 100,
matnr like marav-matnr, "Material number
maktx like marav-maktx, "Material short text
matkl like marav-matkl, "Material group (so you can test to make
" intermediate sums)
ntgew like marav-ntgew, "Net weight, numeric field (so you can test to
"make sums)
gewei like marav-gewei, "weight unit (just to be complete)
end of imat.
Other data needed
field to store report name
data i_repid like sy-repid.
field to check table length
data i_lines like sy-tabix.
Data for ALV display
TYPE-POOLS: SLIS.
data int_fcat type SLIS_T_FIELDCAT_ALV.
select-options:
s_matnr for marav-matnr matchcode object MAT1.
start-of-selection.
read data into table imat
select * from marav
into corresponding fields of table imat
where
matnr in s_matnr.
Check if material was found
clear i_lines.
describe table imat lines i_lines.
if i_lines lt 1.
Using hardcoded write here for easy upload
write: /
'No materials found.'.
exit.
endif.
end-of-selection.
To use ALV, we need a DDIC-structure or a thing called Fieldcatalogue.
The fieldcatalouge can be generated by FUNCTION
'REUSE_ALV_FIELDCATALOG_MERGE' from an internal table from any
report source, including this report.
Store report name
i_repid = sy-repid.
Create Fieldcatalogue from internal table
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = i_repid
I_INTERNAL_TABNAME = 'IMAT' "capital letters!
I_INCLNAME = i_repid
CHANGING
CT_FIELDCAT = int_fcat
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3.
*explanations:
I_PROGRAM_NAME is the program which calls this function
I_INTERNAL_TABNAME is the name of the internal table which you want
to display in ALV
I_INCLNAME is the ABAP-source where the internal table is defined
(DATA....)
CT_FIELDCAT contains the Fieldcatalouge that we need later for
ALV display
IF SY-SUBRC 0.
write: /
'Returncode',
sy-subrc,
'from FUNCTION REUSE_ALV_FIELDCATALOG_MERGE'.
ENDIF.
*This was the fieldcatlogue
Call for ALV list display
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = i_repid
IT_FIELDCAT = int_fcat
TABLES
T_OUTTAB = imat
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
*explanations:
I_CALLBACK_PROGRAM is the program which calls this function
IT_FIELDCAT (just made by REUSE_ALV_FIELDCATALOG_MERGE) contains
now the data definition needed for display
I_SAVE allows the user to save his own layouts
T_OUTTAB contains the data to be displayed in ALV
IF SY-SUBRC 0.
write: /
'Returncode',
sy-subrc,
'from FUNCTION REUSE_ALV_LIST_DISPLAY'.
ENDIF.
first learn basic programing afterwards
go through commands, statements , events, functional modules.....etc.
and implement these stuff, in programing,. and do practising.
Check the following links:
http://www.sapbrainsonline.com/TUTORIALS/TECHNICAL/ABAP_tutorial.html
http://sap-img.com/
http://sapabaplive.blogspot.com/2007/07/download-abap-in-21-days.html
http://help.sap.com/saphelp_40b/helpdata/en/4f/991f82446d11d189700000e8322d00/applet.htm
http://www.sapbrainsonline.com/TUTORIALS/TECHNICAL/ABAP_tutorial.html
http://www.esnips.com/web/SAPAbapCertificationDocs/
Start with this.Refer this
For BDC:
http://myweb.dal.ca/hchinni/sap/bdc_home.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.sapdevelopment.co.uk/bdc/bdchome.htm
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm
http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm

ABAP-QUOTQTION-MM RELATED

Similar Messages

Maybe you are looking for