ABAP RuntimeError SYSTEM_IMODE_TOO_LARGE

Hello Experts,
I get this error SYSTEM_IMODE_TOO_LARGE, when i try to load some 888,000 records, we run loads over 12 million records and never faced this problem. I tried to run for a specific selection of 4000 records bassed on idoc numbers and i managed to succeed in running it into the ODS, I have used PSA & Subsequently into Data Target option.Also i did try with the other few options, i could succeed in loading only for 4000 records and not when i remove the select option and run the entire 888,000.It runs for about 1 and half hours and throws me this dumpo in the source system.
Somewhere in the dump description it also says, active source code not available anymore, program altered whilst executing etc....
The default setting was as follows:
Maximum size of a data packet in kByte:                35000
Maximum number of dialog processes for sending data
5
Number of data packets per Info-IDoc
10
I changed it to 20000 instead of 35000 in the infopackage and re-ran the load, it still failed with the same error.
Kindly help.
Regards
Jitu

Hi,
My problem is not solved, well i know what you say, but i want the solution as in how to fix it, well what could i do about the memory and stuff, well what is the way i could load the data into my target etc.
I also tried running the datasource in RSA3 in r/3, well it threw me the same dump, this means there is nothing to do with BW, the problem is with Basis.
Regards,
Jitu

Similar Messages

ALE RBDMIDOC problem

Hi Experts,
I am getting error SYSTEM_IMODE_TOO_LARGE.
The program takes the change pointers and creates an IDOC. Only way now is to process change pointers mannually to reduce the number of change pointers for this program.
Can you suggest any way to process change pointer mannually and creating IDOCS. BD21 transaction is of no use because it is submitting RBDMIDOC.
Thanx
Sushama

Hi,
Refer
Go through the below thread.
SYSTEM_IMODE_TOO_LARGE runtime error
ABAP RuntimeError SYSTEM_IMODE_TOO_LARGE

How to solve SYSTEM_IMODE_TOO_LARGE

job is failing due to "SYSTEM_IMODE_TOO_LARGE" error,
can you suggest me how to solve

Check the job and associated abap program.
Discuss with functional/developer and then search the note on OSS.
It is very generic and common error and you will get many notes specific to it.
Hope it will help you
Thanks
Amit

Error message SYSTEM_IMODE_TOO_LARGE

Hi All,
I have one job which runs daily and extracts the data from GLPCA table ans sends it to Legacy system.
Since last couple of days this job is getting cancelled with error message SYSTEM_IMODE_TOO_LARGE.
I guess this is becasue of the huge data its picking up from GLPCA table.
Please suggest me how to get rid of this error.
Its Urgent.
Any pointers are apprcitaed.
NOTE: I AM USING 4.6C VERSION OF SAP.
-Sanjay

Hi,
See OSS Note 548845.
".... According to note 548845, their session is trying to use more than 2GB of memory. We are on 4.6C and the only way to get around this seems to be to change the profile parameters ztta/roll_extension and abap/heap_area_nondia to allow sessions to use 4GB of memory...... "
Regards
Kiran Sure
Edited by: Kiran Sure(skk) on May 29, 2008 7:59 PM

Issue in Creation of XML file from ABAP data

Hi,
I need to create a XML file, but am not facing some issues in creation of XML file, the in the required format.
The required format is
-<Header1 1st field= u201CValueu201D 2nd field= u201CValueu201D>
   - <Header2 1st field= u201CValueu201D 2nd field= u201CValueu201Du2026u2026. Upto 10 fields>
          <Header3 1st field= u201CValueu201D 2nd field= u201CValueu201Du2026u2026. Upto 6 fields/>
          <Header4 1st field= u201CValueu201D 2nd field= u201CValueu201Du2026u2026. Upto 4 fields/.>
           <Header5 1st field= u201CValueu201D 2nd field= u201CValueu201Du2026u2026. Upto 6 fields/>
      </Header2>
   </Header1>
Iu2019m using the call transformation to convert ABAP data to XML file.
So please anybody can help how to define XML structure in transaction XSLT_TOOL.
And one more thing, here I need to put the condition to display the Header 3, Header 4, Header 5 values. If there is no record for a particular line item in header 3, 4 & 5, I donu2019t want to display full line items; this is only for Header 3, 4 & 5.
Please help me in this to get it resolved.

Hello,
you can use CALL TRANSFORMATION id, which will create a exact "print" of the ABAP data into the XML.
If you need to change the structure of XML, you can alter your ABAP structure to match the requirements.
Of course you can create your own XSLT but that is not that easy to describe and nobody will do that for you around here. If you would like to start with XSLT, you´d better start the search.
Regards Otto

Logical command in ABAP.....Urgent

Hi,
i am pretty new using ABAP program so i neeed help urgently. i am trying to move a file on the application server from one directory to the other and i was using the open dataset function to do that. but the file i am trying to move is pretty big and because i am using internal table to store, it is causing problems with the space.
i have consulted the basis guys and they have managed to create a logical file for copying from one directory to the other on the application server. to help you furthter. i am enclosing the mail sent to me.
I have created a logical command which should copy the file from one location to the other but you need to pass it the source dir and file name and the destination dir and file name.
The logical command is ZCOPY and uses cmd /c copy
Copies one or more files to another location.
COPY [/V] [/N] [/Y | /-Y] [/Z] [/A | /B ] source [/A | /B]
     [+ source [/A | /B] [+ ...]] [destination [/A | /B]]
source       Specifies the file or files to be copied.
/A           Indicates an ASCII text file.
/B           Indicates a binary file.
destination Specifies the directory and/or filename for the new file(s).
/V           Verifies that new files are written correctly.
/N           Uses short filename, if available, when copying a file with a
               non-8dot3 name.
/Y           Suppresses prompting to confirm you want to overwrite an
               existing destination file.
/-Y          Causes prompting to confirm you want to overwrite an
               existing destination file.
/Z           Copies networked files in restartable mode.
The switch /Y may be preset in the COPYCMD environment variable.
This may be overridden with /-Y on the command line. Default is
to prompt on overwrites unless COPY command is being executed from
within a batch script.
the problem now is i have no idea about how to use the logical command. can any one help me.
Thank you,
Ravi.

If memory is not an issue, then there should be no reason why this should not work.
report zrich_0001.
parameters: d1 type localfile default '/usr/sap/TST/SYS/Data1.txt',
            d2 type localfile default '/usr/sap/TST/SYS/Data2.txt'.
data: itab type table of string with header line.
start-of-selection.
* Read old file
open dataset d1 for input in text mode.
if sy-subrc = 0.
    do.
      read dataset d1 into itab.
      if sy-subrc <> 0.
        exit.
      endif.
      append itab.
    enddo.
endif.
close dataset d1.
* Write to new file
open dataset d2 for output in text mode.
loop at itab.
    transfer itab to d2.
endloop.
close dataset d2.
* Delete the old file
delete dataset d1.
Regards,
Rich Heilman

Logical Database in Abap Objects

Hi to All
I want do it a program report using a Logical Database.
Is this possible ??? But when I make a GET <node>, occurs the following error:
         "" Statement "ENDMETHOD" missing. ""
I'm doing the following:
CLASS MONFIN IMPLEMENTATION.
       METHOD TRAER_DATOS.
               GET VBRK.
       ENDMETHOD.
ENDCLASS.
Please, somebody tell me how I use the logical database in Abap Objects.
Thank you very much
Regards
Dario R.

Hi there
Logical databases whilst of "some use" are not really part of OO.
If you want to use a logical database in an abap OO program I would create a special class which just does the get data from your DB and pass this either at record or table level.
Techniques such as GET XXXX LATE aren't really part of any OO type of application since at Object Instantiation time you should be able to access ALL the attributes of that object.
As far as OO is concerned Logical databases are a throwback to "Dinosaur Technology".
Since however modules such as SD and FI are still heavily reliant on relational structures (i.e linked tables etc) then there is still some limited life in this stuff but for OO try and solve it by another method.
If you really must use this stuff in OO then do it via a FMOD call and save the data in a table which your method will pass back to your application program.
You can't issue a GET command directly in a method.
Cheers
Jimbo

LOGICAL DATABASE IN HR ABAP PRPGRAMMING

Hi Friends,
what is use of LOGICAL DATABASE IN HR ABAP PROGRAMMING
AND END-OF-SELECTION EVENT IN HR PROGRAMMING PROGRAMMING???
regards,
vijay.

hi
HR Logical Databases
In Human Resources (HR), the following logical databases can be used as a data source for HR InfoSets:
PNP (PNPCE)
PAP
PCH
By selecting a logical database, you determine the HR data that can be reported on using an InfoSet.
Logical Database PCH
This logical database generally enables you to report on all HR infotypes. However, you are advised not to use this logical database unless you want to report on Personnel Planning data.
Logical Database PNP (or PNPCE)
Use logical database PNP to report on HR master data. It is possible to use logical database PCH to access this data, but PNP meets such reporting requirements more quickly because it is best suited to the task of selecting persons.
Logical database PNP enables you to access HR master data and infotypes from Personnel Planning. For example, you have the following options:
Reporting on the costs, number of attendees booked, and instructor for a business event on which an employee is booked
Reporting on working time and planned compensation for a position that an employee occupies
Reporting on the validity and proficiency of a qualification that an employee fulfils
From a technical perspective, this means you can use PNP to report on all of the infotypes that exist for objects (infotype 1000) that have a direct relationship (infotype 1001) with the Person object.
The ability to access infotypes from Personnel Planning using logical database PNP is a special feature that you can only use in the context of SAP Query and Ad Hoc Query. You cannot use this functionality for ABAP reports you programmed yourself.
You can also use logical database PNP to report on data from Personnel Time Management (infotypes 2000 to 2999) and Payroll (special payroll infotypes for the USA and customer infotypes; for more information, access Customizing for the Human Resources Information System and see Payroll Results).
Logical Database PAP
Logical database PAP enables you to access data from Recruitment.
regards
navjot
reward if helpfull

FileName in ABAP XSLT Mapping

Dear SDN,
In an integration scenario we are using sender File Adapter and a ABAP XSLT Mapping.
Is there any way to get the source FileName from such mapping. Im trying to use the adapter-specific message attributes, but it doesn't work, and I didn´t find an example, probably I and doing somthing wrong.
regards,
GP

Thank you for your help,
I just try to access the adapter-specific attibutes using:
<xsl:stylesheet version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:key="java:com.sap.aii.mapping.api.DynamicConfigurationKey">
<xsl:variable name="filename" select="key:create('http://sap.com/xi/XI/System/File', 'Directory')" />
</xsl:stylesheet>
but the following error raised:
<SAP:Stack>Error while calling mapping program YXSLT_TEST (type Abap-XSLT, kernel error ID CX_XSLT_RUNTIME_ERROR) Call of unknown function</SAP:Stack>
have you had this situation?

ABAP-- diff between sy-sy-tabix and sy-index

Hi Guru's,
Pleae can anybody expalins me what is the difference between sy-tabix and sy-index(Loop Index) ?
Because in one case i am Modifyimg the internal table inside the do loop by giving sy-index ((Index of Internal Tables)(MODIFY scarr_tab INDEX sy-index FROM scarr_wa TRANSPORTING currcode. ) in the syntax and in other case inside loop statement i am modifyng same record by giving sy-tabix MODIFY scarr_tab INDEX sy-tabix FROM scarr_wa TRANSPORTING currcode.) in the syntax.
in both cases its working fine but i am not getting which one i have to use where to modify the internal table?
regards
SATYA

Hi Henry,
SY-INDEX is the value of the current iteration. It is applicable for the following programming constructs in ABAP -
DO...ENDDO.
WHILE...ENDWHILE.
SY-TABIX (TABle IndeX) is applicable to internal tables. If you scroll down in the link which Eddie has given, you will find a more detailed explanation for sy-tabix and which statements affect its value.
Regards,
Anand Mandalika.

Comas(,) are not getting displayed in the output while using OO ABAP

Hi All,
I am using ABAP objects to display the ALV report in which there is a requirement to output Quantity fields. The Quantity fields are getting displayed without comas ','. Please help me in getting back the comas in the output.
Eg:
Below logic is used in my program.
Class name: cl_salv_form_layout_grid
Code:
obj_footer->create_text(
        row    = v_row_cnt
        column = v_col_cnt
        text   = Quantity).
Expected output:
39,545.000
Current Output:
39545.000
Thanks in advance for your help.
Thanks & Regards,
Siva.

Hi,
Please check if the images are in the server and in the /images alias path.
thanks,
Sharmila

NULL and Space value in ABAP

Hi All,
I like to know, is it NULL and Space value is same in ABAP, if it is not how to check null value.
Thank you.
Senthil

everything is correct though some answers are not correct.
A Database NULL value represents a field that has never been stored to database - this saving space, potentially.
Usually all SAP tables are stored with all fields, empty fields are stored with their initial value.
But: If a new table append is created and the newly-added fields do not have the 'initial value' marked in table definition, Oracle will just set NULL values for them.
as mentioned: There is no NULL value to be stored in an ABAP field. The IS NULL comparison is valid only for WHERE clause in SELECT statement. WHERE field = space is different from WHERE field IS NULL. That's why you should check for both specially for appended table fields.
If a record is selected (fulfilling another WHERE condition) into an internal table or work area, NULL values are convertted to their initial values anyway.
Hope that sheds some light on the subject!
regards,
Clemens

Sale order before the regeneration of ABAP report: RSM13000

Hi there,
I am just wondering about something.
After we installed support packages, users could not get any sales order without to get any error message and I we could only see an error message via SM21 which says:
Run-time error "LOAD_TYPEPOOL_VERSION_MISMATCH" occurred.
So after we regenerated the ABAP report: RSM13000 after that everythings seems to be ok.
Now the question is: When we try to find the order numbers which the users created before the regeneration we find nothing.
What about this numbers? Did they have not been created at all or what hapened? They customer is asking now.
Thanks in advance
Hanseatik

I still do not know. We created them again

Report J_1IEWT_CERT getting cancelled, generating ABAP dump!

A long running report J_1IEWT_CERT in background mode is getting cancelled after running for a while and generating the following dump :
Error analysis
    When changing or deleting one or more lines of the internal table
    "\PROGRAM=J_1IEWT_CERT\DATA=PRINTTAB[]" or when inserting in the table
     "\PROGRAM=J_1IEWT_CERT\DATA=PRINTTAB[]", 0 was used as
    the line index. An index less than or equal to zero is not
    allowed.
    The error can occur when using the following options:
    1. "INDEX idx" for specifying the line number in the table
     "\PROGRAM=J_1IEWT_CERT\DATA=PRINTTAB[]"
       where you want to change, insert or delete.
    2. "FROM idx" for specifying the start index when deleting a line
       area from or inserting a line area into the table
     "\PROGRAM=J_1IEWT_CERT\DATA=PRINTTAB[]".
    3. "TO idx" for specifying the end index when deleting a line
       area from or inserting a line area into the table
     "\PROGRAM=J_1IEWT_CERT\DATA=PRINTTAB[]".
    At the time of the termination, the table contained 17008 lines.
How to correct the error
    If the error occurred in your own ABAP program or in an SAP
    program you modified, try to remove the error.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "TABLE_INVALID_INDEX" " "
    "J_1IEWT_CERT" or "J_1IEWT_CERT_F01"
    "FILTER_DATA"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
Tried searching for some SAP Notes to fix the issue, no success as of now, Please help me out...

Have you checked these notes ?
363107 Short dump occurs during TDS certificate printing.
803806 Error while genrating TDS certificate 03.01.2005
1066049 J1INCERT - Error while generating TDS certificate
Regards,
Subhash

Debugging is not working in R/3 from WebDynpro-ABAP developed webpage input

Dear Friends,
We are facing a serious problem for debugging. Expecting valuable input for the same.
Debugging is not working in R/3 from WebDynpro-ABAP developed webpage input in Production Server.
The debugging (for WebDynpro-ABAP application) is working in Dev. Server for
1st ] Within R/3
Ex. debug for bapi within R/3. i.e. value enter as input in R/3 only.
2nd ] From webpage to R/3
Ex. Some input given on the internet web page developed through WebDynpro and external breakpoint set in R/3 it works. It directs to R/3 code through debugging.
In Prod. Server the 1st case above is working but the 2nd case is not working.
In Prod. Server the WebDynpro developed applications are running successfully through internet explorer webpage inputs. So running the application is not a problem in prod. Server but debugging of the same is the problem.
The setting which are done in Prod. server are,
1] RZ10 in parameters are set for port and host name.
2.1] In SMICM check for ICM.
2.2] Host file updated in Windows-System 32.
3] In SICF following services are active,
3.1] default_host/sap/bc/webdynpro
3.2] default_host/sap/public/bc
3.3] default_host/sap/public/bc/webdynpro/viewdesigner
3.4] default_host/sap/bc/wdvd
3.5] default_host/sap/public/icman
3.6] default_host/sap/bc/gui/sap/its/webgui
3.7] default_host/sap/public/ping
3.8] default_host/sap/bc/error
3.9] default_host/sap/bc/echo
4] In SE80
4.1] Internet services-System-are published
4.2] Internet services-WEBGUI-are published
4.3] Utilities-Setting-ABAP Editor-Debugging-Username & New Debugger set.
4.4] Utilities-Setting-ABAP Editor-Editor-Front-End Editor(New) set.
5] In Su01 for user profiles sap_all & sap_new is assigned and role SAP_BC_WEBSERVICE_DEBUGGER is assigned.
6] The support packages are also updated to latest level.
7] Gone through following links but not getting any clues.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/74d50bd1431b5ae10000000a42189c/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/EN/77/3545415ea6f523e10000000a155106/frameset.htm
Thanks in Advance.
Best Regards,
Abhijit.

No cross posting
Read the "Rules of Engagament"
Regards
Juan

ABAP RuntimeError SYSTEM_IMODE_TOO_LARGE

Similar Messages

Maybe you are looking for