ABAP Short Dump Occurring

Hi All
We had do done a DBEXPORT of our R/3 4.6C while doing there was a increment conversion pending and we got error during the export, we finished the conversion and then started the DBEXPORT again and it completed successfully, however after this we are receiving ABAP Short dumps which says DBIF_RSQL_INTERNAL_ERROR, Internal error when accessing table "T179 ". Practically for any new entry we do in database.Kindly suggest how to go about.
Regards
Arun

Hi Micheal
we had done an incremental conversion  for DBTABLOG table which is forbidden also was not complete,so we completed the conversion and removed a field which was added in the table (this was cause of error),we removed the field and activated teh table and the short dump was resolved.
Anyway thanks for your reply.
Arun

Similar Messages

  • ABAP short dump when loading data into Infocube

    Hello All,
    I am getting an ABAP short dump error when loading data into Infocube. I tried to load data from PSA and ODS.
    I ran the code to compress the Infocube, no improvement still getting the same error.
    Error Analysis:
    A raise statement in the program "SAPLRSDU_PART" raised in the exception.
    Internal Notes:
    The termination occured in the function "ab_i fune" of the SAP Basis system. Specifically in the line 2316 of the module "//bas/620/src/krn/runt/abfunc. C#18".
    The internal operation just processed is "FUNE"
    Advance thanks !!!
    Siv

    Hello Siv,
    try to run program SAP_DROP_EMPTY_FPARTITIONS to display existing partitions. Then compare it to the number of uncompressed requests. Maybe there's a mismatch.
    SAP notes that might help: 385163, 590370
    Regards,
    Marc
    SAP NetWeaver RIG, US BI

  • ABAP short dump with "CNTL_ERROR"

    Hi,
    I am getting an ABAP short dump with "CNTL_ERROR" while using an input script. What do I do?
    Thanks,
    Sreekar.

    Hi,
    Newer versions of SAP GUI and R/3 include external controls called as ActiveX (OCXs). ABAP code internally issues some commands to flush and refresh these controls. Since, when using GuiXT and input scripting, these controls are not created, and ABAP dumps. Use keyword "Enable controls" (without quotes on a separate line) in a screen block that has an ActiveX control.
    Example:
    Screen SAPLCOIH.3000
      Enter "/Menu=4,1,5"
    Screen SAPLSP01.0100
      Enter "=No"
    Screen RIPLKO10.1000
      Enable controls
      Set F[Group] "UG"
      Enter "/8"
    Reward Points if found helpfull..
    Cheers,
    Chandra Sekhar.

  • ABAP short dump error while creating an invoice

    Hi All,
    We are creating a delivery(Unit is EA) for the material for which the Unit Conversion is maintained as 1CS = 48 EA. So while creating a delivery If I maintain the delivered quantity is less than 24, I am not able to create an invoice.It's throwing an ABAP short dump error BCD zerodivide run time error.
    If I deliver greater than or equal to 24, then the invoice is created without any issue
    I have checked if there is any  CMIR record but no record is maintained.
    Can anyone help me out on this?
    Regards,
    Manjunath

    Hi Manju,
         Can you post the dump screen shot, which should contain the source code for that dump.
    Regards,
    Krishna

  • ZGUIXT16 produces an ABAP short dump

    Hi,
    The program ZGUIXT16 (intended to generate the local value help files) always stops and produces an ABAP short dump. What could be the reason?
    Thanks,
    Varsha.

    Hi,
    ZGUIXT16 uses the SAP standard function CHECKTABLE_GET in order to generate the local value help. For some reason, this function aborts for several domains, depending on the R/3 release.
    Solution: In ZGUIXT16 some domains are already excluded:
    Exclude some domains (error in SAP value list generation):
    CHECK DOM-DOMNAME NE: 'HIERANM', 'IM_POSNR', 'IWEXTSYMBL', 'P02_BTRTE'.
    Here you can enumerate domains that lead to errors, and then restart the program.
    Reward Points if found helpfull..
    Cheers,
    Chandra Sekhar.

  • ABAP short dump after BI upgrade

    hi all,
    While executing any program  in SE38, it is giving Short dump while same program executing in SA38, it is executing .
    Firstly, we got short dump in TCode - RSRT, while executing report.
    Regards,
    Prasad
    Edited by: Prasad Mahindrakar on Apr 14, 2010 8:15 AM

    Kindly find the Error, which is generating at time of Report Execution
    Error Analysis:
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_PROGRAM_NOT_FOUND', was not
    caught in
    procedure "WRITE_DATA" "(METHOD)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    On account of a branch in the program
    (CALL FUNCTION/DIALOG, external PERFORM, SUBMIT)
    or a transaction call, another ABAP/4 program
    is to be loaded, namely "GP42LSZTOVG57DGEB7BO763P3PN ".
    However, program "GP42LSZTOVG57DGEB7BO763P3PN " does not exist in the library.
    Possible reasons:
    a) Wrong program name specified in an external PERFORM or
       SUBMIT or, when defining a new transaction, a new
       dialog module or a new function module.
    b) Transport error

  • SPAM update of DMIS stalled with ABAP Short Dump

    Hi Experts,
    Was wondering if someone could help me. I am trying to install DMIS on my NW 702 system. The installation sort of halted half way and now I am just not able to get into SPAM. Everytime I try to start SPAM the system loops for a good few minutes and it short dumps as below:
    Category          
    ABAP Programming Error
    Runtime Errors    
    TIME_OUT
    ABAP Program      
    SAPLOCS_SEMAPHORE
    Application Component  BC-UPG-OCS
    Trigger Location of Runtime Error
        Program                                 SAPLOCS_SEMAPHORE
        Include                                 LOCS_SEMAPHOREU02
        Row                                     85
        Module type                             (FUNCTION)
        Module Name                             OCS_QUEUE_SEMAPHORE
    55 *   OCS is locked, remember this
    56     ev_locked = on.
    57 *   check if OCS is locked by other (OCS) tools
    58     IF iv_tool = space.   "maybe were are called in batch, check
    59       IF sy-batch = off OR
    60          ls_pat10-btch_state NA gc_batch_states.
    61 *       IV_TOOL = space but no batch processing
    62 *       -> foreign lock, you are not allowed to proceed
    63         cs_sema = ls_pat10.
    64         RAISE foreign_lock.
    65       ENDIF.
    66     ELSE.
    67       IF ls_pat10-ocs_tool <> iv_tool.
    68 *       foreign lock, you are not allowed to proceed
    69         cs_sema = ls_pat10.
    70         RAISE foreign_lock.
    71       ENDIF.
    72     ENDIF.
    73
    74 *   we are either in batch processing or IV_TOOL matches PAT10
    75 *   --> own lock, return it
    76     IF iv_read_only <> space.
    77       cs_sema = ls_pat10.
    78       EXIT.
    79     ENDIF.
       79
    ENDIF.
       80 *   update it
       81
    ls_pat10 = cs_sema.
       82
    ls_pat10-responsibl = sy-uname.
       83
    ls_pat10-imple_date = sy-datum.
       84
    ls_pat10-imple_time = sy-uzeit.
    >>>>>
    UPDATE pat10 FROM ls_pat10.
       86
    cs_sema = ls_pat10.
       87   ENDIF.   "sy-subrc = 4
       88
       89 ENDFUNCTION.
    4 FUNCTION
    SAPLOCS_SEMAPHORE              
    LOCS_SEMAPHOREU02                 
    85
       OCS_QUEUE_SEMAPHORE
    3 FUNCTION
    SAPLOCS_BATCH                  
    LOCS_BATCHU07                    
    186
       OCS_DELETE_BATCH_SEMAPHORE
    2 FORM    
    SAPMSPAM                       
    MSPAMF06                         
    190
       READ_N_CHECK_BATCH_JOBS
    1 MODULE (PBO) SAPMSPAM                       
    MSPAMO01                         
    776
       READ_BATCH_JOBS
    Would appreciate if someone can help and has faced something similar.
    Regards,
    Manish

    Hi
    The Abap programs get a timeout when trying to update table PAT10 ( OCS Semaphore).
    Check in SM12 if there are locks on that table
    Check also that table contents, there should be only one entry, what is in field OCS_TOOL ?
    DMIS should be installed using transaction SAINT (in client 000) and not SPAM.
    Regards
    1468391 - Installation and delta upgrade of DMIS 2010_1

  • Abap short dump

    Hi BW experts,
                  when i goto to t-code st22, i find number of runtime errors with name of runtime error as " Message_type_X" and also when i open a msg it says "the current application detected a situation which really shld not occur. Therfore a termionation with a short dump .......""
    Can anyone suggest whats happening?? Thank you
    Dave

    Hi Dave,
    Now when you know the load has failed for the load you did from 1 infoprovider to other then go to the monitor of the failed request and then under status tab you will have short dump pushbutton at the bottom click on that which will take you to the dump after giving R/s ID and p/w there you check the error reason of the dump as said under error analysis.
    Or go to RSMO there check out the load for today and try identifying the data target you loaded and then follow the above steps.
    Hope it will help..
    Regards,
    Rohini

  • ABAP Short Dump - COMPUTE_BCD_OVERFLOW - CX_SY_ARITHMETIC_OVERFLOW

    Runtime errors      COMPUTE_BCD_OVERFLOW
    Exception              CX_SY_ARITHMETIC_OVERFLOW
    I want to move Currency variable with 4 decimals to another currency variable with 2 decimals. Please advice me with a suitable solution without causing short dump.
    Appreciate Your Help in Advance.
    Thanks.
    Kannan.

    SAP catch the exception like this :
    CATCH SYSTEM-EXCEPTIONS conversion_errors = 1
                                        arithmetic_errors = 5.
                  xkwert = xkomv-kwert * 1000 * xkomv-kpein / komp-mgame.
                  xkomv-kbetr = xkwert.
                ENDCATCH.
                IF sy-subrc = 1 OR sy-subrc = 5.
                  xkomv-kbetr = 0.
                  xkomv-fxmsg = '802'.
                  komp-fxmsg  = '802'.
                ENDIF.

  • CP Segment - Missing Segments-BIGS2- abap short dump

    hi,
    i am facing a very typical problem, when i copy character set 8300 from 4.6c to ECC 6 and do the SCP, i have not problem in consistency check but when do the copy of 8300 ->9300 in 4.6c and then export to ECC6 and then run the SCP i have the error BIGS2 - Doesnot exits and when tried to check, it is throwing ABAP DUMP, please find the attached file for more detailed error update
    I dont know how to attached the screen shot of the error, please let me know if any more information needed.

    Hello,
    as of WebAS 6.10. the structure of code pages changed.              
    For that reason, all customer defined code pages (i.e. code pages starting with 9) need to be converted to comply with the new structure, otherwise errors might occur. As you copied SAP Code Page 8300 to 9300, you have to convert this code page with report RSCP0126. Please refer to SAP Note 485455 for details. The application help in transaction SCP also contains a short description.
    Hope this helps.
    Best Regards,
    Michaela

  • ABAP short dump when posting to FICO

    We are testing payroll on a upgraded version of our live system and recieving an abap error stating an issue with object "COSTS" . This is only occuring when trying to post the results to FICO and only for one particular employee. On searching we have found SAP note 890828 which seems a rather larger problem than just affecting one employee.
    Anyone have any idea's?

    Hi
    The ABAP dump should be as follows:
    Runtime errors         CONNE_IMPORT_WRONG_STRUCTURE
    Exception              CX_SY_IMPORT_MISMATCH_ERROR
    Error when importing object "COSTS".
    You need to follow the instructions in note 890828.
    The CLASS CL_HR_PAY_RESULT_GB is used by RPCIPE00 in release your upgrade release
    You have two choices in the note.
    1) a modification in SAP standard to "ignore structure boundaries".
    2) run the conversion program RPUSTRCL_COSTS.
    Regards

  • Error "ERROR_PERIOD_VERSION" when loading DTP  - Abap short dump

    Hi,
    I got this Error when loading with DTP. it occured in the transformation end routine.
    I have this function module in my End routine. * REBW_FIRST_DAY_OF_PERIOD_GET*
    Information on where terminated
        Termination occurred in the ABAP program "SAPLREBW_UTIL" - in
         "REBW_FIRST_DAY_OF_PERIOD_GET".
        The main program was "RSAWBN_START ".
        In the source code you have the termination point in line 41
        of the (Include) program "LREBW_UTILU03".
    Source Code Extract
    Line  SourceCde
       11 *"     REFERENCE(E_SPERIOD) TYPE  XFELD
       12 *"  EXCEPTIONS
       13 *"      ERROR_PERIOD
       14 *"      ERROR_PERIOD_VERSION
       15 *"      FIRSTDAY_NOT_DEFINED
       16 *"      PERIOD_NOT_DEFINED
       17 *"----
       18 DATA:
       19     DATUM(8),
       20     TAG(2),
       21     IMONAT     TYPE I,
       22     JAHR       type rsfiscyear,
       23     DATE       type rscalday,
       24     PERZAHL(4) TYPE N,
       25     IRC(1)     TYPE N,
       26     ls_t009    like t009,
       27     ls_t009y   like t009y,
       28     ls_t009b   like t009b.
       29
       30 *
       31 * Version der Periodenermittlung nachlesen
       32 *
       33   IF I_FISCVAR NE ls_T009-PERIV.
       34     SELECT SINGLE * FROM  T009
       35                     into ls_t009
       36                     WHERE PERIV = I_fiscvar.
       37     IF SY-SUBRC NE 0.
       38 *
       39 *     In Tabelle $ fehlt der Eintrag $
       40 *
    >>>>>       RAISE ERROR_PERIOD_VERSION.
       42     ENDIF.
       43   ENDIF.
       44 *
       45 * Periode überprüfen
       46 *
       47   PERZAHL = ls_T009-ANZBP + ls_T009-ANZSP.
       48   IF I_FISCPER < 1 OR I_FISCPER > PERZAHL.
       49 *
    does any knows how I can resolve it.
    thanks

    check table t009, it seems you have some entries missing (based on fiscal variant)
    you can solve this, by going to the source system tree, right-click on your source system and choose transfer global settings.
    you can transfer all settings now...
    M.

  • RSPC is not accessing as Short dump occurs

    Hi friends,
    I am accessing the tcode : rspc and when i login for first time, i choose network instead of tree  and so system went to dump .
    i want to rectify it . plzz help me with solution.
    Regards,
    Rajesh

    Hi,
    Check the notes 946481 & 528408.
    Hope it helps.

  • A short dump occurs when accessing SAP BI 7.0 using GUI 620

    hi,
    i'm getting this error while executing..DTP.
    solve this .....

    Hi,
    BI 7.0 will not work with SAP GUI 6.20.
    Take a look at this SAP note.
    Maintenance strategy / deadlines 'SAP GUI'
    SAP Note Number: [147519|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_fes/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d313437353139%7d]
    Compatibility - 6.20
    SAP GUI for Windows 6.20 is compatible with products based on SAP Web Application Server 6.40/7.00/7.01/7.02 and all earlier releases of SAP Software which are still supported by SAP (this includes extended maintenance).
    Exceptions to this rule are
    BI 7.0: Requires new frontend components shipped only together with SAP GUI for Windows 6.40 as of compilation 4. For BI 7.0 you definitely need at least this compilation CD. For further information on this please check the master guide for SAP NetWeaver 2004s components and documentation center at
                http://service.sap.com/~sapidb/011000358700004970342005E/051024Instguides.htm
                http://help.sap.com/saphelp_nw04s/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
    SCM 5.0: Requires a new frontend component which is integrated into SAP GUI for Windows 6.40 (also see note 889989).
    SAP GUI for Windows 6.20 is not compatible with SAP Systems based on SAP Web Application Server 7.10 and higher.
    Additional:
    Troubleshoot the SAP NetWeaver 2004s BI Frontend Installation
    and
    Frontend requirements - page 11
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10564d5c-cf00-2a10-7b87-c94e38267742
    and
    Re: GUI 640
    Regards
    Andreas

  • Why do we call an ABAP Runtime error a "Short Dump"

    Hi All,
    I was just working on one of the ABAP runtime errors with my technical counterpart and a question came to my mind "Why do we call an ABAP Runtime error a "Short Dump"?".
    I tried asking a few friends of mine working in the technical space in SAP and they were not able to answer.
    So, some one of you experts help me getting answer to this question.
    Thanks in Advance.
    Nitin.

    ABAP Runtime error is a generalized term .......... meaning the error occured while runtime.
    wheare as short dump.
    Short -  means brief.
    dump - error information from the memory
    Short dumps (also called ABAP memory dumps). Short dumps occur when an ABAP program fails.
    Short dumps provide basic information about which program failed and what the error was.
    hope this helps.

Maybe you are looking for