ABAP short dump when loading data into Infocube
Hello All,
I am getting an ABAP short dump error when loading data into Infocube. I tried to load data from PSA and ODS.
I ran the code to compress the Infocube, no improvement still getting the same error.
Error Analysis:
A raise statement in the program "SAPLRSDU_PART" raised in the exception.
Internal Notes:
The termination occured in the function "ab_i fune" of the SAP Basis system. Specifically in the line 2316 of the module "//bas/620/src/krn/runt/abfunc. C#18".
The internal operation just processed is "FUNE"
Advance thanks !!!
Siv
Hello Siv,
try to run program SAP_DROP_EMPTY_FPARTITIONS to display existing partitions. Then compare it to the number of uncompressed requests. Maybe there's a mismatch.
SAP notes that might help: 385163, 590370
Regards,
Marc
SAP NetWeaver RIG, US BI
Similar Messages
-
Short Dump when loading Data into Cube UNCAUGHT_EXCEPTION(Pls Help)
Dear Guru's
i am trying to load data into a Cube from a ODS and the load gets dump...
In Dump Analysis.....
The exception 'ZCX_EDW_MAP_ROOT' was raised, but it was not caught anywhere
along
"UNCAUGHT_EXCEPTION" "ZCX_EDW_MAP_ROOT"
"ZCL_EDW_MAP_ROOT==============CP" or "ZCL_EDW_MAP_ROOT==============CM002"
"LOAD_MAPPING_INFOPROV"
So it would be great if some one can give me some suggestion to handle this issue
Thanks in Adv
DevDear Arun,
i have checked the routine there exists some code
Eg: data: vref_monitor type ref to zcl_edw_monitor,
But to say fact i ddnot i understood it....
Any suggestions dude...pls
thanks in adv
Dev -
Short Dump when loading data (Runtime Error ITAB_DUPLICATE_KEY) Urgent Pls
Dear Guru
We are loading data into (2 ODS and ! Cube) from one Infopkg.
When i do delta update it throws following error
(for one ODS it is green) and for another ODS and CUBE it is red.
Runtime Error ITAB_DUPLICATE_KEY
What happened?
Error in ABAP application program.
The current ABAP program "GP229LMXTFYDS5X6UC3ND03NIV2" had to be terminated
because one of the
statements could not be executed.
Please suggest me some solution, i am with client..its a serious issue now.
Hope you understand
Thanks in Adv
Devhi,
hope if you retrigger the load it would be successful.
force the request status to red and delete from the all target and retrigger the load.
else chk if in the detail tab u could find the data upto PSa. if so delete the red request alone and pull the records to tohose records from PSA.
Ramesh -
Short Dump while loading data into the GL ODS
Hello Guyz
I am getting a database error while loading the GL ODS in BW. I am performing an INIT load, and the error occurs during the activation stage:
Database ErrorHello Atul,
PSAPTEMP has nothing to do with PSA. It is a temporary storage space and is present in all systems.
You can check this in transaction DB02 if you are using Bw 3.x and DB02OLD if you are using BI 7.0. Once in DB02/DB02OLD, you will see a block which says tablespaces. In this block, there is a push button for freespace statistics, click on it and it will take you to a screen which shows the free space for all tablespaces.
Hope this helps,
Regards. -
GETWA_NOT_ASSIGNED short dump when load business partner master data
Hi
I've this error GETWA_NOT_ASSIGNED short dump when load business partner master data, it's running in BI 7.0 with support package 12.
The error is because the field symbol is that pointed to the line of an internal table that was deleted.
I think that it's an incompatibility between subroutine and unicode.
Do you have idea about correct this error?
Regards
Jose.Hi Ravi
Yes, it's a dump
It's when running a process chain to load Business partner master data
The error say:
-.You address a field symbol that pointed to the line of an internal table that was deleted.
-.You address a field symbol that was previously reset using UNASSIGN or that pointed to a local field that no longer exist.
-. You address a global function interface, although the respective function module is not active - that is, is not in the list of active calls. the list of active calls can be taken from this short dump.
I think that it's for the unicode corversion because I've the last support package 12 installed and the rest of the process chain are running perfect.
My hotmail mail is [email protected] if you need the screen shot.
Regards and thanks a lot
Jose -
Regarding Short Dump While loading data from DB Connect
Dear All,
We are having an issue of getting short dump while loading data from DB Connect to BW. We were able to load the data into BW Dev using the same data source without any problem. Whereas in Production, I am getting the following error:
Runtime Error PERFORM_CONFLICT_TAB_TYPE
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
What could be the reason for the error that I am gettinghi,
Refer Note 707986 - Writing in trans. InfoCubes: PERFORM_CONFLICT_TAB_TYPE
Summary
Symptom
When data is written to a transactional InfoCube, the termination PERFORM_CONFLICT_TAB_TYPE occurs. The short dump lists the following reasons for the termination:
("X") The row types of the two tables are incompatible.
("X") The table keys of the two tables do not correspond.
Other terms
transactional InfoCube, SEM, BPS, BPS0, APO
Reason and Prerequisites
The error is caused by an intensified type check in the ABAP runtime environment.
Solution
Workaround for BW 3.0B (SP16-19), BW 3.1 (SP10-13)
Apply the attached correction instructions.
BW 3.0B
Import Support Package 20 for 3.0B (BW3.0B Patch20 or SAPKW30B20) into your BW system. The Support Package is available oncenote 0647752 with the short text "SAPBWNews BW3.0B Support Package 20", which describes this Support Package in more detail, has been released for customers.
BW 3.10 Content
Import Support Package 14 for 3.10 (BW3. 10 Patch14 or SAPKW31014) into your BW system. The Support Package is available once note 0601051 with the short text "SAPBWNews BW 3.1 Content Support Package 14" has been released for customers.
BW3.50
Import Support Package 03 for 3.5 (BW3.50 Patch03 or SAPKW35003) into your BW system. The Support Package is available once note 0693363 with the short text "SAPBWNews BW 3.5 Support Package 03", which describes this Support Package in more detail, has been released for customers.
The notes specified may already be available to provide advance information before the Support Package is released. However, in this case, the short text still contains the term "Preliminary version" in this case.
Header Data
Release Status: Released for Customer
Released on: 18.02.2004 08:11:39
Priority: Correction with medium priority
Category: Program error
Primary Component: BW-BEX-OT-DBIF Interface to Database
Secondary Components: FIN-SEM-BPS Business Planning and Simulation
Releases
Software
Component Release From
Release To
Release And
subsequent
SAP_BW 30 30B 30B
SAP_BW 310 310 310
SAP_BW 35 350 350
Support Packages
Support
Packages Release Package
Name
SAP_BW_VIRTUAL_COMP 30B SAPK-30B20INVCBWTECH
Related Notes
693363 - SAPBWNews BW SP03 NW'04 Stack 03 RIN
647752 - SAPBWNews BW 3.0B Support Package 20
601051 - SAPBWNews BW 3.1 Content Support Package 14
Corrections Instructions
Correction
Instruction Valid
from Valid
to Software
Component Ref.
Correction Last
Modifcation
301776 30B 350 SAP_BW J19K013852 18.02.2004 08:03:33
Attributes
Attribute Value
weitere Komponenten 0000031199
Thanks
(Activate ODS/Cube and Transfer rules again..) -
hello can anybody please say me how to load data into infocube in bw7.0
thanks a lot
komal.Hi,
These are the steps for creating an Info cube and data loading
1. It is same as creating an Info cube in BW 3.5
2. Here once u created an info cube,assign dimesions to it.
3. Create application component, info source similar to BW 3.5.
4. After creating info source, right click on it
5. Here all the dimensions and key figures are mapped automatically in transformation rules.
6. Right click on info cube find the option : Create Data transfer Process
7. create an info package, as usual and schedule the package to load the data into an Info provider. -
Cannot load data into infocube in BW NW2004s sneak preview
For BW with NW2004s preview.
I can load data into PSA but there is an error happens when loading data from PSA to infocube using DTP. The error is as 'Join table TESTDATRNRPART0 does not exist - read SAP note 871084'. In note 871084, it says the SP05 fix the problem. But I check the status of the BW server, it is 'release 700 / level 0005 / highest support package SAPKW0005'.
Does it mean the BW server has SP05?Hi Parvendar and Vinod,
Thanks for the information. I checked in SM58. For today it shows 4 TRFC. 1 with user bwremote and 3 with user BASIS(the user i am logged in as). All have error saying "An exception occurred that was uncaught".
I also tried to reschedule the Data for the infopackage alone. We are having 3 infopackages in the process chain and I tried iwth one of them.
When i scheduled it, the Infocube -> Manage shows the status of the request as Yellow. When i try to see the Load monitor, it displays the same message as I saw yesterday.
In Extraction Phase it shows
Extraction (messages): Errors Occured
Data Request recieved - green
Data selection scheduled - green
41 Records Sent (41 Records received_) - yellow
Data Package1(41 records): Missing Messages - yellow
Date Selection ended - green
Transfer (Idocs and TRFC) Missing messages or warnings
Data package1: arrived in BW: processing: data packet not yet processed
Info IDOC1,2,3,4 are all green
Update PSA, Transfer Rules and Update rules are all green
Update (0 new/0 changed) : warning recieved
message missing: update finished for 0TCT_C21
Please let me know what could be the possible issue
Regards,
Raghavan
Edited by: Raghavan Guruswaminathan on May 11, 2010 8:10 AM -
Loading data into infocube in bi 7.0 from flat file.
Hello All,
I need the complete procedure for loading data into the infocube from flat file in bi 7.0 i.e.using transformation,DTP etc.
Please help me with some gud documents.Hi Pratighya,
Step by step procedure for loading data from flat file.
1. Create the infoobjects you might need in BI
2. Create your target infoprovider
3. . Create a source system
4. Create a datasource
5. Create and configure an Infopackage that will bring your records to the PSA
6. Create a transformation from the datasource to the Infoprovider
7. Create a Data Transfer Process (DTP) from the datasource to the Infoprovider
8. Schedule the infopackage
9. Once succesful, run the DTP
10. This will fill your target.
Hope this helps
Regards
Karthik -
Error when loading data into Planning
Unable to load data into planning 11.1.2.3.200 using ODI 11.1.1.7
Please find the errors from below logs:
INFO [SimpleAsyncTaskExecutor-2]: Oracle Data Integrator Adapter for Hyperion Planning
INFO [SimpleAsyncTaskExecutor-2]: Connecting to planning application [xxxxxxx] on [xxxxxxxxxxx]:[xxxx] using username [admin].
INFO [SimpleAsyncTaskExecutor-2]: Successfully connected to the planning application.
INFO [SimpleAsyncTaskExecutor-2]: The load options for the planning load are
Dimension Name: Account Sort Parent Child : false
Load Order By Input : false
Refresh Database : false
INFO [SimpleAsyncTaskExecutor-2]: Begining the load process.
DEBUG [SimpleAsyncTaskExecutor-2]: Number of columns in the source result set does not match the number of planning target columns.
INFO [SimpleAsyncTaskExecutor-2]: Load type is [Load dimension member].
ERROR [SimpleAsyncTaskExecutor-2]: Record [[A603010, null, null, null, null, null, null, null, null, null, null, null, xxxxx, -100, F3E0,C011,E7172_93275,FY17,Stage 1,Current Service Level,Jul, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null]] was rejected by the Planning Server.
ERROR [SimpleAsyncTaskExecutor-2]: Record [[A601060, null, null, null, null, null, null, null, null, null, null, null, xxxxx, -250, F3E0,C011,E7172_93275,FY17,Stage 1,Current Service Level,Jul, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null]] was rejected by the Planning Server.
log.err
Account,Data Load Cube Name,Budget,Point-of-View,Error_Reason
A603010,xxxxx,-100,F3E0,C011,E7172_93275,FY17,Stage 1,Current Service Level,Jul,Cannot load dimension member, error message is: RemoteException occurred in server thread; nested exception is:
java.rmi.UnmarshalException: unrecognized method hash: method not supported by remote object
A601060,xxxxx,-250,F3E0,C011,E7172_93275,FY17,Stage 1,Current Service Level,Jul,Cannot load dimension member, error message is: RemoteException occurred in server thread; nested exception is:
java.rmi.UnmarshalException: unrecognized method hash: method not supported by remote object
FDMEE log:
ERROR [AIF]: Error: No records exist for Period 'Pd 2 - 2014-08-01'
ERROR [AIF]: Error: No records exist for Period 'Pd 3 - 2014-09-01'
FDMEE Logging Level is set to 5Are you sure that you haven't got Planning 11.1.2.3.500 in your environment? This sounds spookily similar to the issue described in note 1678759.1 which was seen after applying Planning 11.1.2.3.500. If it's definitely Planning 11.1.2.3.500 is there any chance that someone has applied ODI patch 18687916 to the ODI home (C:\Oracle\Middleware\odi)?
If you /*are*/ running Planning 11.1.2.3.500 then you might need to apply patch 18687916 to C:\Oracle\Middleware\odi - you might need note 1683307.1 to take some of the pain out of applying this patch though.
Given the error that you're seeing though there's a mismatch in versions of JAR files between ODI and the Planning server somewhere.
Regards
Craig -
Hi All,
I am getting this error message while loading data in BW. The eeror message is below:
Data not received in PSA Table.
Diagnosis
Data has not been updated in PSA Table . The request is probably still running or there was a short dump.
Procedure
In the short dump overview in BW, look for the short dump that belongs to your data request. Make sure the correct date and time are specified in the selection screen.
You can use the wizard to get to the short dump list, or follow the menu path "Environment -> Short dump -> In Data Warehouse".
Removing errors
Follow the instructions in the short dump.
When I checked the short dump it is as below.
ShrtText
An SQL error occurred when accessing a table.
What can you do?
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer termination messages, especially those beyond their normal deletion date.
How to correct the error
Database error text........: "ORA-14400: inserted partition key does not map to any partition"
Internal call code.........: "[RSQL/INSR//BIC/B0000541000 ]"
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem in the SAP note system. If you have access to the note system yourself, use the following search criteria:
How to correct the error
Database error text........: "ORA-14400: inserted partition key does not map to any partition"
Internal call code.........: "[RSQL/INSR//BIC/B0000541000 ]"
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem in the SAP note system. If you have access to the note system yourself, use the following search
"DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
"GP12DW003276UZE34XM7O2QXLER" or "GP12DW003276UZE34XM7O2QXLER"
"INSERT_ODS"
Can someone suggest me what should I check?
Thanks in advance.Thanks a lot Manga. I did what you told and it gave me this error message.
Inconsistency: High value for table /BIC/B0000541000: 0002 ; PARTNO value in RSTSODS: 0022
So you mean to say once I click on correct error button, it should be good. So after that if do the loading, it should not give me this problem if I am right.
But can you tell me what exactly does that error message mean? Also is this not an table space issue. I have to wait to correct that error as DBA is currently looking into it.
Assigned points. Will assign more points if the issue resolves. -
Short dump while loading data in to Bw using Process Chain.
got the problem in the Production System.......... I won't get any confirmation from my customer to debug the program in the Poduction.
In BW I have to load the data every day using the process chain. in the monitor I can't find any problem every thing is working fine. status is green.. and loads the data into ODS successfully. But the job runs more than 6 Hrs and automatically an E-mail is sent to us that the processing takes long time.But it loads the data successfully into ODS.
Since 10 days everyday we got a mail with the same problem. My customer asked me tTo analyse the problem.
I check the short dump there I found that due to some problem the program get intrupted.
<b>the short dump</b>
""Lokale Schnittstelle:
*" IMPORTING
*" VALUE(I_INFOCUBE) TYPE RSINFOCUBE
*" EXCEPTIONS
*" ILLEGAL_INPUT
*" REQUEST_NOT_CLOSED
*" INHERITED_ERROR
DATA: l_s_cube TYPE rsd_s_cube,
l_t_dummy TYPE rsdri_t_rfcdata,
l_s_rsapoadm TYPE rsapoadm,
l_nothing_found TYPE rs_bool.
get type of cube
CALL FUNCTION 'RSD_CUBE_GET_ONLY_DB'
EXPORTING
i_infocube = i_infocube
i_objvers = rs_c_objvers-active
i_with_atr_nav = rs_c_false
i_with_message = rs_c_false
IMPORTING
e_s_cube = l_s_cube
EXCEPTIONS
infocube_not_found = 1
illegal_input = 2
OTHERS = 3.
CASE sy-subrc.
WHEN 0.
WHEN 1.
RAISE illegal_input
WHEN OTHERS.
RAISE inherited_error.
ENDCASE.
In the short dump I observed that the porgram get intrupted at RAISE illegal_input when sy-subrc = 1.
I have to analyse this. problem........ whay is so happened...............
Any one of you face the same problem............... if so please let me give your valuble suggestions regarding this.
Cheers
sailekhaLooks like it reaches the water mark level thats why you are getting message.
-
Regarding short dump while loading data
Hi All,
I am loading data using 0FI_GL_4. This is a periodic load which was working fine till March. There are lot of postings that happened in April and period was open till 20th. Now when I am trying to load that for 12th period April. I am getting the following error "ABAP/4 processor: DBIF_RSQL_SQL_ERROR" in short dump.
This is the error analysis:
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"BWFIR_READ_BSEG_CPUDT_DATA" "(FUNCTION)"
I am tried to load data 5 times till now and every time I am getting the same error. I checked with Basis people for the DB space and it is fine.
Why I am suddenly getting this error???Hi,
it looks like an internal table overflow in your source system.
Try reducing the data_package size of your load or ask your basis guys to have a look on short dump and perhaps increase this memory.
Try RSA3 in the source system and see if it works with your data_package size values from BW and see if it works. If not reduce the number of records...
On which plugin release is your system running?
hope this helps,
Oliviier. -
Dump when loading Data from DSO to Cube
Hi,
i get a short dump DBIF_REPO_PART_NOT_FOUND when trying to load data from a dso to a cube. From DSO to DSO it works fine.
any idea`s?
thx!
Dominikthe Dump occurs in the last step of the last data pakage in the DTP Monitor.
I checked the OSS note, but i don´t know how to check the kernel version.
Now i used another DSO for testing and i got another Dump with a different name.
After that i logged in again and it works with my test DSO data...
But still not working with the original one...
@Kazmi: What detaisl u mean exactly? -
Short dump while loading data in ODS
Hi,
When i scheduled data load for ODS, a short dump was generated with following error:
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"RULE_BASED_MODIFY_RSMONMESS" "(FORM)"
How to correct the error
The exception must either be prevented, caught within the procedure
"RULE_BASED_MODIFY_RSMONMESS"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
Database error text........: "ORA-01654: unable to extend index
SAPBD2.RSMONMESS~AXY by 128 in tablespace PSAPBD2"
Internal call code.........: "[RSQL/INSR/RSMONMESS ]"
Please check the entries in the system log (Transaction SM21).
Please suggest what needs to be done.Hi Sneh,
This is table space issue.
You need to contact basis guys to get it resolved.
Take a screen shot of this error and send the information to basis guys.
Once they clear the problem. repeat the step.
Hope this helps,
Sri.....
Maybe you are looking for
-
Macbook + mini-DVI to video adapter problems!
Hi, My roommate and I both have Macbooks - I got mine in June '06, it's one of the older black 80 gb models and hers is a white 120 gb that she got in August '07. We bought a mini-DVI to video adapter so we could watch DVDs and video files on our TV,
-
Display resolution and Mac OS X 10.5.7
I am now using my Mac mini (early 2009) as my primary computer (new aluminum keyboard and an LG 23" LCD HDTV) and have sent the iMac Core Duo to "the boys" room for them to use. But they have called my attention to the display resolution a few times
-
Trouble getting a 16:9 video in Premiere to burn to DVD without cropping
I am using Adobe Encore CS5.1 and I am having trouble burning a 16:9 DVD. Everytime I create the DVD, the video becomes stretched and the footage is off-screen. I tried a couple different transcoding methods, but the best I could do still had some fo
-
Hi Gurus, I installed BI7, and want to be define logical system for creating client. I login from default user sap*/DDIC, IMG, transaction SALE), choose Bisic Setting-> Logical Systems->® Define Logical System; I received message can not create for t
-
I am trying to access a jsf page using http://localhost:9090/appname but i am getting the error "The requested resource (/TPDashboard/) is not available." I have tried out all the answers that have been given to this earlier but am still not able to