ABAP Statistics BI Reporting via CCMSBISETUP

Hello together,
I am using ABAP-Statistics BI-Reporting after running CCMSBISETUP on Solution Manager 7.0 EHP1(BI Content 7.04, PI Basis 7.01 Level 0004). Primarily I want to make analyses based on the Infoprovider 0CCMSATIM (time profile).
During executing Queries of the InfoProvider 0CCMSATIM (time profile) I detected, that the datasets, which are collected from a satellite system, are incomplete. After a drilldown by the attribute "time range" i found out, that some time ranges are missing completely (e.g. 10-11a.m.), some contain incomplete data (e.g.9-10 a.m.) and some are correct (e.g. 0-9 a.m.). TA ST03N on the Satellite system itself contains the correct data and confirmed that presumtion. It seems that the extractor is not working properly at some times. This phenomenon occurs very irregularly. Apparently the error occurs most often when the satellite system is very busy and used to capacity.
The Satellite Systems seem to be configured correct in CEN (RZ21).
The datasets of the Myself-System (Solution Manger) in the InfoCube are correct too.
Does anyone know this problem and how to solve it?
Thank you.

hi
pls check this "The data load process ran without error messages, however no data or only a small amount of data has arrived in the data targets" under listed problems
[http://help.sap.com/erp2005_ehp_02_sp/helpdata/en/46/62b13c5d8c0ad2e10000000a11466f/content.htm|http://help.sap.com/erp2005_ehp_02_sp/helpdata/en/46/62b13c5d8c0ad2e10000000a11466f/content.htm]
hope this helps
Jansi

Similar Messages

JOB_OPEN, SUBMIT REPORT VIA JOB, JOB_CLOSE, How to get result?

Hi Friends,
I am calling reports using jobs as calling job_open, submit report via job.., and job_close. But I want to the output/result of the report. How can I do this?
Thanks.

Hello nkara,
Welcome to SDN!!!
Check this thread:
background grid
REgards,
Vasanth

Error to send a report via mail with BI Publisher

Hello,
I am working with BIP 10.1.3.4 over Windows Server 2003 Standard Edition, and I would like to send a report via mail.
I added one Email server navigation via Admin>Delivery Configuration > Email with the server name and host.
Then Send report via Email, got error.
oracle.apps.xdo.service.delivery.DeliveryException: oracle.apps.xdo.delivery.DeliveryException: smtp
     at oracle.apps.xdo.service.delivery.impl.DeliveryServiceImpl.deliverToEmail(DeliveryServiceImpl.java:228)
     at oracle.apps.xdo.servlet.scheduler.XDOJob.deliver(XDOJob.java:1190)
     at oracle.apps.xdo.servlet.scheduler.XDOJob.execute(XDOJob.java:478)
     at org.quartz.core.JobRunShell.run(JobRunShell.java:195)
     at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
Caused by: oracle.apps.xdo.delivery.DeliveryException: smtp
     at oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequestHandler.submitRequest(Unknown Source)
     at oracle.apps.xdo.delivery.AbstractDeliveryRequest.submit(Unknown Source)
     at oracle.apps.xdo.service.delivery.impl.DeliveryServiceImpl.deliverToEmail(DeliveryServiceImpl.java:222)
     ... 4 more
Caused by: javax.mail.NoSuchProviderException: smtp
     at javax.mail.Session.getService(Session.java:764)
     at javax.mail.Session.getTransport(Session.java:689)
     at javax.mail.Session.getTransport(Session.java:632)
     at javax.mail.Session.getTransport(Session.java:612)
     ... 7 more
I have followed this SR, and I applied the solution, but it isn't solved the issue (ID: 1072742.1)
https://support.oracle.com/CSP/ui/flash.html#tab=KBHome%28page=KBHome&id=%28%29%29,%28page=KBNavigator&id=%28from=BOOKMARK&viewingMode=1143&bmDocTitle=BI%20Publisher%20With%20JDE%20Fails%20To%20Send%20Email,%20Error:%20javax.mail.NoSuchProviderException:&bmDocID=1072742.1&bmDocType=PROBLEM&bmDocDsrc=KB%29%29
Regards,
Mónica.

Hi Christian.
You could put the lines of your list in a table of type SOLISTI1 and then use the function module SO_NEW_DOCUMENT_SEND_API1 to send the content of this table. You have to fill the table RECEIVERS with the address you want to send the report to.
Hope that helps,
Timo.

Run XML Publisher Report via URL (like Oracle Reports)

Hi All,
Is it possible to run xml-publisher report via URL?
In Oracle Reports works this fine:
http://test:7777/reports/rwservlet?server=test_bihome1&report=test1.rdf&userid=test/testv@db&desformat=pdf&destype=cache
We need this for public reports without user login.
Thanks
Thomas

Thomas,
I was waiting to get home before Tim replied... He got the better of me this time :-)
You say you want to let your users run reports using XMLP just by clicking on an URL same way you do with reports and without having to login. If I got the question right and assuming that:
1.Your company is not overly concerned on who runs what reports
2.Who sees what data
3.Your XMLP installation is on your intranet and firewalled from the outside
What you can do is:
On the main page of your XMLP Enterprise installation you should see a folder called "Guest". Any report you create under this folder is run as user "guest" which means you don't have to authenticate yourself as you would normally do.
I have tested this on my home server and this is what I've done:
1.Logged in as admin or any other user you've created with admin privileges created a report under the "Guest" folder.
2.Copied the URL, on my server it is "http://samba.private.net:15101/xmlpserver/Guest/People/People.xdo"
4.Logged off as admin and pasted the URL to a new browser window
5.Hit return and Voila, my report runs without the need to login to XMLP.
Hope this helps. Let us know how you got on.
Cheers,
Joao
PS: If you want to see the report for yourself here's the URL from the outside: http://medeiros.homelinux.net:15101/xmlpserver/Guest/People/People.xdo
I'll keep the link alive for a couple of days.

Error in Scheduling a report via FTP option in WEBI

Hi,
I am not able to schedule my report via FTP. Im putting in the details correctly.
Would like to confirm what value should be mentioned in port, the servers port? and account refers to the user Id on the server ?
It is giving the following error :
connection error. [WSA10038]: [CrystalEnterprise.Ftp]

Hi Neha,
This error message may occur due to following causes:
1. The ftp destination parameters of the relevant Job Server are not set correctly.
or
2. The ftp port is blocked.
Kindly refer SAP Note 1427440 to verify the solution.
Regards,
Nakul Mehta

Error while sending a report via alert

Hi,
I have created an alert to send a message which includes a report link. The alert worked fine, i did receive the report via email.But then once i started creating new alerts , i started getting errors in alert launching.I checked up with the services and found out that Event engine shows up an error which is
EventEngine:Clause inconsistency between EventEngine and Satellites
Start Unloading rules.
Also i have got troubles with the user generated already and which was working well all these while. Now the error i see in Login management of Adminstrator is
Login information for "NT AUTHORITY\NETWORK SERVICE". This login is not currently known to be a valid login.
I would be really thankful if someone could help me with this.
Regards,
Lathika

Login information for "NT AUTHORITY\NETWORK SERVICE". This login is not currently known to be a valid login.
You get the above error message whenever you configure IIS to allow anonymous authentication for the web directory OracleBAM, using the NETWORK SERVICE profile for anonymous logins. You'll need to disable anonymous login for the BAM web directory.

Call a ABAP Web-Dynpro-application via a BSP-Application

We have a BSP-Framework, that call several applications among other things other BSP-Applications, ITS-Application and other systems. Now I want to integrate a ABAP Web Dynpro-Application.
For the moment I can call the ABAP Web Dynpro-Application from our application.
This application runs in the same session as the Framework (verify in transaction sm04).
When I want to call another application in the Framework, the session will be killed (no more sessions in sm04). This happens also, when I want to call the ABAP Web Dynpro-Application a second time.
I guess, that the ABAP-Framework thinks I want to go outside the system (for example www.google.de) and close the session. I found out, that this wouldn't happen, if the application were suspended. But I found no way to tell the application via a url-parameter to suspend.
Can someone help me?

Thx for the tip,
but I can't firea suspend plug. Because I'm in BSP. I understand the docu so, that you have the option to call a other apllication like BSP from a ABAP Web Dynpro.
I want to call the ABAP Web Dynpro form BSP like this way.
1. Start BSP-Framework
2. Call ABAP Web-Dynpro-Application from BSP
3. Call another Application from BSP without automatically logout by unload ABAP Web Dynpro. (I have a chance to call the ABAP Web Dynpro again via url to suspend before I call the other app.)
Regards Stefanie

Error while trying to save a crystal report via the Add-ins

Hi All,
I'm getting an error while trying to save the crystal report after I have opened it from the SAP.
When I'm trying to save the report via the Add-ins I'm getting the next error :
Unknown error accured failed to get the internal key of the current user.
Thanks for your help,
Eyal

Hi Eyal,
Even though you posted your 1st message couple of month ago, I would still say welcome you to post on the forum.
What is your B1 version and PL?
Thanks,
Gordon

HFM and Workspace 11.1.2.0 issues with opening Apps and reports via web

Hi,
we are running decentralized environment where we have HFM Web and App servers on Windows 2008 Server SP2 and few shared elements like OHS, HSS (Shared Services) and Workspace service from Solaris 10 SPARC (64bit) server.
The base version is 11.1.2.0 and on Windows we have fixes from 1-9 installed whereas on top of Solaris we have no fixes/patches yet installed.
When we test workspace from web server desktop connecting to Solaris server it seems traffic is fine as Apps are available and browsing them seems to work normally = Webserver is able to locate Workspace on Solaris, Workspace is able to connect to HFM App server and App server again able to connect HFM App db container.
When we access to workspace url over web (the traffic according to my understanding should go via OHS to Webserver and then redirect to Solaris server Workspace and then like mentioned above.
Something gets wrong here as when accessing Workspace url we get non-showing icons, $ characters in messed up menu rows and few error messages like :
- Invalid or could not find module configuration
- Required application module hfm.appcontainer is not configured. Please contact your administrator
- Namespace Communication Error
Also opening test report via web url workspace gives error:
Required application module reporting.reportViewer is not configured. Please contact your administrator.
+
Namespace Communication Error
Our experience from previous lower environment was that symptons like described might be caused by wrong service start order. Thus we tried to review this carefully and boot in correct order, but still problems. Also, boot order shouldn't be totally wrong as workspace works when using directly from Web server.
If any of mentioned symptons rings anyone's bell please reply.
Something still in firewalls or rather in configuration, OHS maybe?
At this point we don't yet dream of proper loadbalancing or High availability, but rather get this single web and single app server server + shared elements from Solaris server to work without error messages.
We do know that release 11.1.2.1 is supposed to fix many things, but we need to get this 11.1.2.0 working in a way or another.
Thanks for any tips that might arise.
Br, MK
Edited by: user9327521 on Nov 30, 2010 4:55 AM

Were u able to ever resolve this? And how?
Thanks,
Sejal

How to email reports via SMTP server FORMS AND REPORTS 6i and databse 8i

Dear All,
through reports builder reports are build but i need to email reports via SMTP server is it possible in 6i are not?if yes the how please rep asap

If it will be a scheduled report, you can create a batch file to run report with reqd parameters and generate it's pdf in a oracle directory.
Then schedule the batch file on oracle database pc, (thru task scheduler if OS is windows),
Then a email procedure will be required which will pick up the pdf from oracle directory, attach it and send mail.
Even the email procedure can be scheduled thru oracle job, but the OS batch schedule time and Oracle Job time should be handled as some gap will be needed between the two.
As for the email smtp procedure with attachments, you can find one in this forum or try googling it.
Regards,
Amol

Open a draft report via Code

How could I open an saved Draft report via API/UI.
I have draft an report via API/UI and now I would show this report on Desktop/SAP
I would open it via code
z.B. application.forms.items("")
because I get the Docnum of my before safed draft but It wouldn´t shown at the SAP now so I have to open it via code

Sorry for my first Miss Understandable explanation.
Ok let me explain the other times.
I have a parked document, I want this now to open it via code (programming).
I have this code today:
programspeach: vb.net
we assume we have a sales order and press now via code the menu option "Save as a parked document"
' to change the sales order in a parked document
appl.ActivateMenuItem(("5907"))
' Information: MY_FormUID = the sales order before
' Change DocNum in DocEntry
oRSTRDocData.DoQuery(("SELECT max(DocEntry) FROM ODRF WHERE DocNum=" & Value))
appl.Forms.Item(MY_FormUID).Items.Item("txtDraft").Specific.Value = oRSTRDocData.Fields.Item(0).Value
' take the DocEntry
Value = oRSTRDocData.Fields.Item(0).Value
'open parked Document via DocEntry and let it show
appl.Forms.Item(MY_FormUID).Items.Item("lnkDraft").Click(SAPbouiCOM.BoCellClickType.ct_Linked)
' Close the Sales Order before
appl.Forms.Item(OLD_FormUID).Close()
After this there is no Document opened, also not the parked Document
So yet I have an parked Document but when I open the SBO again there is no Document Opened? When I do this prozedere via SBO there will be at least the parked Document opened.
What do I wrong?

Open saved draft report via API/UI

How could I open an saved Draft report via API/UI.
I have draft an report via API/UI and now I would show this report on Desktop/SAP

Sorry for my mismatched formulation of this problem
I would open it via code
z.B. application.forms.items("")
because I get the Docnum of my before safed draft but It wouldn´t shown at the SAP now so I have to open it via code gg
but also thx to you

Problem about showing report via Portal after modifying BWReports.css

Hi folks,
I use BEx 3.X.
I wanna make title of table column to be shown in the center of table cell.
So, I modify class SAPBEXstdItem in BWReports.css, and I changed text-align of SAPBEXstdItem into 'center'.
I run the report via Web Application Designer (SAP BW 3.x).
the title is located in the center of table cell.
However, I run the report via Portal, the title is still located on the left of table cell.
I don't know why.
Could you help me to solve the issue?
Thanks in advance.

I can't find wad link here.
Do you mean BEx Web Application Query String?
My BEx Web Application Query String is sap-language=<Request.Language>&bsplanguage=EN&cmd=ldoc&TEMPLATE_ID=ZXJP_C04_WT0110
Edited by: Xiaodong Ji on Nov 14, 2008 4:53 AM

How to run the report via application server

Report not running?
hi All,
I am calling the report via forms, In application server i had recompiled the reports in two different format too.
1. myreports.rep
2. myreports.jsp
I have called the report from the menu and i used code like below
Declare
      V_id Varchar2(100);
Begin
    V_id := Run_Report_Object('myreports');
End;but i am getting following error.
Frm-41219:Cannot find report:Invalid ID.and subsequently an another too.
Frm-40738:Argument 1 to builtin RUN_REPORT_OBJECT cannot be null.please guide me
kanish

I using Forms 10g R2, i store the recompile version in Application server.
Good, so you can refer to the metalink note I mentioned above, as per storing the reports in the application server, the default place for running reports is not a folder in the FORMS_PATH, the REPORTS_PATH is set in the $ORACLE_HOME/bin/reports.sh file, pointing by default to the sample folder - $ORACLE_HOME/reports/samples/demo, for testing purposes you can put your report there and try it again, or you can modify the REPORTS_PATH variable in the reports.sh file to point to the directory you were mentioning.
Note: I am calling the report throug menu using the eariler posting code.
I would recommend to create a Form to call the Report, I am not sure if there are restrictions about invoking a report directly from the menu.
About the code, you are missing a lot there, refer to metalink note mentioned above, here is an excerpt from that document.
PROCEDURE TEST_REPORT IS
repid      REPORT_OBJECT;
v_rep      VARCHAR2(100);
rep_status VARCHAR2(50);
BEGIN
repid := find_report_object('report5');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'html');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'repserver90');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=no pdeptno='||:dept.deptno);
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
    LOOP
      rep_status := report_object_status(v_rep);
    END LOOP;
IF rep_status = 'FINISHED' THEN
    /*Display report in the browser*/
    WEB.SHOW_DOCUMENT('http://<YourServerName:8888/reports/rwservlet/getjobid'||
   substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
ELSE
    message('Error when running report');
END IF;
END;
In my eariler version 6i (2 tier) when i call the report it invoke parameter form. will 10g also behave same like 6i?
Yes, there is still a parameter Form which runs in an HTML page.
*1. Should i want to create any Report_Path, Report_classpath ? if yes ,where should i ?* It will depend on your configuration, the easiest way is to setup the REPORTS_PATH in the $ORACLE_HOME/bin/reports.sh file, if you are configuring the reports server to use environment ids, that would not work and you would need to setup the REPORTS_PATH directly in the reports engine configuration file .. $ORACLE_HOME/reports/conf/rwserver.template.
Edited by: Rodolfo Ferrari on Jun 3, 2009 3:19 PM

Printing a report via URL

Hey,
is there any chance to get a report printout via an url call? We can get our reports via url as pdf, html, rtf and so on. In my mind there is no chance for a printout or perhaps email via url?
I tested the delivery API as second way without some good results.
thanks for help and ideas

Hi Gael,
your URL is made up of :
[ProcedureName]?[parameter1]=[value1]&[parameter2]=[value2]
creating URLs like this can have problems especially with spaces and punctuation.
the answer is a FORM
the following will create a hidden form :
FORM ACTION="[ProcedureName]" METHOD="POST" name="F1"
INPUT type="HIDDEN" name="[parameter1]" value="[value1]"
INPUT type="HIDDEN" name="[parameter2]" value="[value2]"
/FORM
you can set the values in the form using:
document.F1.[parameter1].value="abc123%%&&$$!";
document.F1.submit();
will submit the form and the PL/SQL procedure should receive the text as it was contained in the form.
the only characters that can now cause problems are :
" as it delimits the field.
' as it may cause problems in PL/SQL.
\ as it is a special character.
Regards Michael

ABAP Statistics BI Reporting via CCMSBISETUP

Similar Messages

Maybe you are looking for