ABAP Trial Version 7.1 Licence Renewal

Hi SDN Communitym
My ABAP Trial Version license expires today, I have tried this website to renew the license at https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/minisap/minisap.htm, but have still not received an email with the licence. How long does it usually take?
What will happen if I don't renew it before the expiry date, will I still be able to renew it? or will I have to reinstall?
thanks
Bijo
Edited by: Bijo Samuel on Aug 20, 2009 2:09 PM

got it, it just took some time.
thanks

Similar Messages

  • SAP Netweaver ABAP Trial Version password expired

    Hi All,
    I just got an installer for the SAP NetWeaver ABAP Trial Version and I was able to install the Trial version. However, my license have already expired. So what I did was is to renew the license. But my problem right now is that I can't logon using BCUSER. I'm getting  "Logon not possible (error in license check".
    During the time when I renew the license, i didn't encounter any errors or problems.
    Could anybody tell me what I'm doing wrong?
    How can I have BCUSER up and running since I need this account to practice ABAP?
    I tried deleting the old license using SAP* user because I don't think it is possible to do using that user.
    Thanks
    James

    I have had a similar issue but the above remedy did not fix my problem.  I had successfully installed the trial version and used it until the license expired.  After downloading a new license, I installed it using SAP*.  The installation was successful however, when trying to login using BCUSER I am still getting that same error.
    Under slicense, user sap*, I have the following:
    NSP     TEMPLICENSE     NetWeaver_ADA     26.10.2008     25.01.2009     Perm     DEMOSYSTEM     000000000311079138      Valid
    Sorry for the sloppy cut&paste but you can see that the install appears to be valid.
    Is my only recourse to uninstall and reinstall the trial version?  Also, is there some way for me to backup any of the work I have done in SE80 before wiping the install?
    Thanks in advance,
    Rob

  • 'SAP NetWeaver 7.0 (2004s) - ABAP Trial Version'

    Hi Experts,
                   I would like to install 'SAP NetWeaver 7.0 (2004s) - ABAP Trial Version'  which is available at SDN downloads - in my laptop. how long can i use the same. Will it get expired after some time? Is there any option to use the same for long.
    Regards
    Sarath

    Hi Sarath,
    Your SAP NetWeaver 7.0 ABAP evaluation license is valid for 90 days BUT, you can install a new license for valid for more 90 days.
    I've using SAP NetWeaver 7.0 ABAP for more then a year and I renewed my license 3 times.
    To install a new (Renew) license see my answer in this thread where is saplicense.exe file?.
    Greetings,
    Marcelo Ramos

  • SAP NW 2004s ABAP Trial Version - Licensing Issue

    Hello all,
    I have successfully installed NW 2004s ABAP Trial Version from the DVD in the SAP Press book: ABAP Objects.
    I requested a trial key (version SP8 or less) and received the following (I can't find what version has actually been installed):
    Installation of the license key
    Script for release 4.5A and higher
    saplicense -install [ifile=...]
    Database: ADABAS D
    Release: SAP NETWEAVER 2004
    SAPSYSTEM = NSP
    HARDWARE-KEY = K1025752517
    INSTNO = DEMOSYSTEM
    EXPIRATION = 20101207
    LKEY = AISXXNKN6FGYQVYTBVPXTKQM
    SYSTEM-NR = 000000000311439750
    I followed the error messages give by the SAP License Administration application and changed the file to read:
    Begin SAP License -
    SAPSYSTEM=NSP
    HARDWARE-KEY=K1025752517
    INSTNO=DEMOSYSTEM
    EXPIRATION=20101207
    LKEY=AISXXNKN6FGYQVYTBVPXTKQM
    SYSTEM-NR=000000000311439750
    I now get this error:
    "Line 7 of the license key file: "SWPRODUCTNAME=" expected.
    Not sure what I need to do next.
    Any suggestions much appreciated.

    Hi There;
    Has been quite some time since the day I first installed the trial version. But if I remember correctly, you automatically got a temporary license  (4 weeks ?) after a successful installation. When it expires then you renew it ( the step you just did ).
    Please go to transaction slicence to check the temp permit (expiry date).
    Regards. jen

  • SAP NW7.01 ABAP trial version installation on Windows Vista.  Error message

    Hi gurus,
    I am installing SAPNW7.01 ABAP trial version.. getting following Error nessage ..ANy idea?
    The installer is unable to run in graphical mode. Try running the installer with the -console or -silent flag.
    I have WINDOWS VISTA with 32bit..I read in document for SAPNW7.01 ABAP trial vesrion, it can be installed on windows vista also..
    Any one has any idea? I suspect it is error bcz of  Java files..but I am not sure..
    Thanks in advance..

    Hi Sanjeeva,
    At first see where java is installed i.e JDK directory, as per as my knowledge it will be in WINDOWS directory like C drive.
    For setting environmental variable (i.e JAVA_HOME,PATH), please follow the below link
    http://www.astahost.com/info.php/Change-Windows-User-Environment-Variables_t19560.html
    Thanks
    Debdeep

  • Installing SAP NW 7.01 ABAP Trial Version for dummies

    Hello sappers...
    Sorry if you thought this was a guide for dummies, though it could turn out to be if I get some help - I'm the dummy!
    Not wanting to be left out, I too have had a host of issues trying to install this, over several days now... it feels like bashing your head against a brickwall.  After staying up till 4am last night, then wiping my laptop and reinstalling Windows AGAIN to start from scratch this morning, and encountering the cranio-mural interface again, I feel like a crash test dummy!
    I am installing on a new installation of Windows Vista Home Basic, I have a gig of RAM and plenty of hard drive space.
    Forgive me if this is an ignorant question, but do I need to install the Loopback adaptor if I'm connected to the internet?  If it's to generate an IP address, surely my computer has one.  Note networking is not my strong point (though I'm an ok programmer - one project manager even gave me 4 out of 10!) - please be kind!  Anyway, I have tried with and without this on my various attempts.
    ANYWAY.... the sorry saga goes like this...
    I seem to be able to install Max DB OR SAP NW 7.01 ABAP Trial Version u2013> NSP, but not both at the same time - I may have done once, and it seemed to work once, I even managed to sign on - then it wouldnt work in the morning - but then that was on Windows XP Pro on my wife's laptop which only has 500 meg of RAM.
    My last attempt was fairly typical - Max DB is showing up in the program menu, but SAP NW 7.01 ABAP Trial Version u2013> NSP is not.
    However, I seem to have managed to start the NSP server ok, using SAP Management console, thanks to a handy tip on this forum about using your Windows OS password when it prompts for credentials.
    When I try to sign on I get 'partner 127.0.0.1:sapdp00 not reached WSAECONNREFUSED: Connection refused - error number 10061, return code -10, system call connect.
    That's one of my better attempts.
    Last night having deleted all the installed files from my C drive, uninstalled everything, tinkered with the registry to remove all relevant entries, I managed to run an installation that skipped out installing MaxDB (it was super quick!), yet did install the SAP NW 7.01 ABAP Trial Version u2013> NSP bits in my program menu - imagine my excitement at being able to start and stop the server, yet with no database it produced red windows on my screen saying 'sorry, you screwed up AGAIN' (or words to that effect).  Trying to sign on produced equally disheartening error messages...
    Am going to give it another try after taking a break, next time WITH loop back adaptor installed...
    Please pardon lack of relevant detail, I didnt note everything I did on every attempt - substituting humour for detail is all that's saving my sanity at this stage...
    Anyone that can help me achieve this will be my friend for ever... I'm a contractor bitten by the recession trying to learn some news skills.... the first one being how to install Netweaver at home...!
    Log text gives
    (Mar 4, 2009 12:50:08 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    (Mar 4, 2009 12:50:08 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
    (Mar 4, 2009 12:50:18 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    (Mar 4, 2009 12:50:18 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
    (Mar 4, 2009 12:50:28 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    (Mar 4, 2009 12:50:28 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
    (Mar 4, 2009 12:50:38 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    (Mar 4, 2009 12:50:38 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
    (Mar 4, 2009 12:50:48 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    (Mar 4, 2009 12:50:48 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
    (Mar 4, 2009 12:50:58 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    (Mar 4, 2009 12:50:58 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
    (Mar 4, 2009 12:51:09 PM), Install, com.sap.installshield.CheckServicesAction, err, An error occurred and product installation failed.  Look at the log file C:\SAP\NSP\log.txt for details.
    (Mar 4, 2009 12:51:09 PM), Install, com.sap.installshield.CheckServicesAction, err, ProductException: (error code = 601; message="Services failed to start (see the log for details)")
    STACK_TRACE: 12
    ProductException: (error code = 601; message="Services failed to start (see the log for details)")
         at com.sap.installshield.CheckServicesAction.install(CheckServicesAction.java:95)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    (Mar 4, 2009 12:51:11 PM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed.  Look at the log file C:\SAP\NSP\log.txt for details.
    (Mar 4, 2009 12:51:11 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
    STACK_TRACE: 15
    ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)

    ok, this is the log from my latest attempt...
    > Subprocess starts at 20090312182156
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC inst_enum
    Execute Session Command : exit
    > Subprocess stops at 20090312182159
    OK
    7.7.06.07    C:\sapdb\NSP\db
    > Subprocess starts at 20090312182159
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC inst_enum
    Execute Session Command : exit
    > Subprocess stops at 20090312182159
    OK
    7.7.06.07    C:\sapdb\NSP\db
    > Subprocess starts at 20090312182205
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC inst_enum
    Execute Session Command : exit
    > Subprocess stops at 20090312182206
    OK
    7.7.06.07    C:\sapdb\NSP\db
    > Subprocess starts at 20090312182206
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC inst_enum
    Execute Session Command : exit
    > Subprocess stops at 20090312182206
    OK
    7.7.06.07    C:\sapdb\NSP\db
    > Subprocess starts at 20090312182206
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC db_enum
    Execute Session Command : exit
    > Subprocess stops at 20090312182209
    OK
    NSP     C:\sapdb\NSP\db                             7.7.06.07     fast     offline
    NSP     C:\sapdb\NSP\db                             7.7.06.07     slow     offline
    > Subprocess starts at 20090312182209
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC db_enum
    Execute Session Command : exit
    > Subprocess stops at 20090312182209
    OK
    NSP     C:\sapdb\NSP\db                             7.7.06.07     fast     offline
    NSP     C:\sapdb\NSP\db                             7.7.06.07     slow     offline
    > Subprocess starts at 20090312182209
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -R C:\sapdb\NSP\db dbm_version
    Execute Session Command : exit
    > Subprocess stops at 20090312182209
    OK
    VERSION    = 7.7.06
    BUILD      = DBMServer 7.7.06   Build 007-123-197-046
    OS         = WIN32
    INSTROOT   = C:\sapdb\NSP\db
    LOGON      = True
    CODE       = UTF8
    SWAP       = full
    UNICODE    = YES
    INSTANCE   = (unknown)
    SYSNAME    = Windows
    MASKING    = YES
    REPLYTREATMENT = none,zlib,auto
    SDBDBM_IPCLOCATION = C:\sapdb\data\wrk
    > Subprocess starts at 20090312182209
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC inst_enum
    Execute Session Command : exit
    > Subprocess stops at 20090312182210
    OK
    7.7.06.07    C:\sapdb\NSP\db
    > Subprocess starts at 20090312182210
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC db_enum
    Execute Session Command : exit
    > Subprocess stops at 20090312182210
    OK
    NSP     C:\sapdb\NSP\db                             7.7.06.07     fast     offline
    NSP     C:\sapdb\NSP\db                             7.7.06.07     slow     offline
    > Subprocess starts at 20090312182211
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC inst_enum
    Execute Session Command : exit
    > Subprocess stops at 20090312182211
    OK
    7.7.06.07    C:\sapdb\NSP\db
    > Subprocess starts at 20090312182211
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC inst_enum
    Execute Session Command : exit
    > Subprocess stops at 20090312182211
    OK
    7.7.06.07    C:\sapdb\NSP\db
    > Subprocess starts at 20090312182212
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u control,******** db_state
    Execute Session Command : exit
    > Subprocess stops at 20090312182213
    OK
    State
    OFFLINE
    > Subprocess starts at 20090312182213
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u CONTROL,******** db_state
    Execute Session Command : exit
    > Subprocess stops at 20090312182214
    OK
    State
    OFFLINE
    > Subprocess starts at 20090312182214
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u CONTROL,******** db_state
    Execute Session Command : exit
    > Subprocess stops at 20090312182214
    OK
    State
    OFFLINE
    > Subprocess starts at 20090312182214
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u CONTROL,******** db_online
    Execute Session Command : exit
    > Subprocess stops at 20090312182228
    > Subprocess call failed
    ERR
    -24988,ERR_SQL: SQL error
    -902,I/O error
    3,Database state: OFFLINE
    Internal errorcode, Error code 9050 "disk_not_accessible"
    20017,RestartFilesystem failed with 'I/O error'
    > Subprocess starts at 20090312182303
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u control,******** db_state
    Execute Session Command : exit
    > Subprocess stops at 20090312182304
    OK
    State
    OFFLINE
    > Subprocess starts at 20090312182304
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u CONTROL,******** db_state
    Execute Session Command : exit
    > Subprocess stops at 20090312182305
    OK
    State
    OFFLINE
    > Subprocess starts at 20090312182305
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u CONTROL,******** db_state
    Execute Session Command : exit
    > Subprocess stops at 20090312182305
    OK
    State
    OFFLINE
    > Subprocess starts at 20090312182306
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u CONTROL,******** db_online
    Execute Session Command : exit
    > Subprocess stops at 20090312182316
    > Subprocess call failed
    ERR
    -24988,ERR_SQL: SQL error
    -902,I/O error
    3,Database state: OFFLINE
    Internal errorcode, Error code 9050 "disk_not_accessible"
    20017,RestartFilesystem failed with 'I/O error'

  • Error while installing SAP NetWeaver 7.01 ABAP Trial Version

    Hi Experts,
    While installing the SAP NetWeaver 7.01 ABAP Trial Version on my pc (Vista) getting the below error.
    (Sep 26, 2010 10:30:07 AM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    (Sep 26, 2010 10:30:07 AM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
    (Sep 26, 2010 10:30:17 AM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    (Sep 26, 2010 10:30:17 AM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
    (Sep 26, 2010 10:30:27 AM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    (Sep 26, 2010 10:30:27 AM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
    (Sep 26, 2010 10:30:38 AM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    (Sep 26, 2010 10:30:38 AM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
    (Sep 26, 2010 10:30:48 AM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    (Sep 26, 2010 10:30:48 AM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
    (Sep 26, 2010 10:30:58 AM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    (Sep 26, 2010 10:30:58 AM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
    (Sep 26, 2010 10:31:08 AM), Install, com.sap.installshield.CheckServicesAction, err, An error occurred and product installation failed.  Look at the log file D:\SAP\NSP\log.txt for details.
    (Sep 26, 2010 10:31:08 AM), Install, com.sap.installshield.CheckServicesAction, err, ProductException: (error code = 601; message="Services failed to start (see the log for details)")
    STACK_TRACE: 12
    ProductException: (error code = 601; message="Services failed to start (see the log for details)")
         at com.sap.installshield.CheckServicesAction.install(CheckServicesAction.java:95)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    (Sep 26, 2010 10:31:09 AM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed.  Look at the log file D:\SAP\NSP\log.txt for details.
    (Sep 26, 2010 10:31:09 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
    STACK_TRACE: 15
    ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Please suggest.
    Thanks
    Neeraj

    > While installing the SAP NetWeaver 7.01 ABAP Trial Version on my pc (Vista) getting the below error.
    >
    > (Sep 26, 2010 10:30:07 AM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    <snip>
    > ProductException: (error code = 601; message="Services failed to start (see the log for details)")
    <snip>
    I suggest you look at the log, the error you posted doesn't reveal much more than the fact a service didn't start which is needed by the installation process. Why it didn't start is not in this message.

  • Error installing SAP NetWeaver 7.01 ABAP Trial Version on Windows Vista

    This is my second attempt to install. The first time the laptop froze during the MaxDB installation. I was not able to use uninstall.exe (did not exist), so I deleted the entire contents of the sapdb folder and also ran the registry clean tool, RegistryClean.cmd, before the second attempt. Any assistance would be appreciated!!  Here is the contents of log.txt:
    (Feb 15, 2011 11:19:04 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed.  Look at the log file C:\sapdb\log.txt for details.
    (Feb 15, 2011 11:19:04 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/Users/OFFICE~1/AppData/Local/Temp/MaxDBSAPNWPREV.log")
    STACK_TRACE: 22
    ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/Users/OFFICE~1/AppData/Local/Temp/MaxDBSAPNWPREV.log")
         at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
         at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
         at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)

    Faisal,
    Thanks for your response to my question.  I have successfully installed VirtualDisk, however I CANCELED the "Create New Virtual Disk" setup at step 8 of your instructions because it states that you must select a size of more than 50GB.  After installing VirtualDisk I only have 38GB of free space on my hard drive.  System requirements for SAP NetWeaver 7.01 ABAP Trial Version states 25GB temporary for installation - 12GB permanent. Your instructions specify that an additional 3.5GB are needed for setup files bringing the total space to 28.5GB.  Why are more than 50GB required?
    If more than 50GB are required, then what are my options? (I have already removed unneeded software, files, etc., so I can't get more space on my existing hard drive.)
    Thanks for your help!
    Gary

  • After installation NetWeaver 7.01 ABAP Trial Version "Logon Error Message"

    Hello all,
    After a sucefull installation of NetWeaver 7.01 ABAP Trial Version and when i tried to acess sap through web browser i get the following error:
    Logon error message
    Service cannot be reached
    What has happened?
    URL http://localhost:8000/sap/bc/gui/sap/its/webgui call was terminated because the corresponding service is not available.
    Note
    The termination occurred in system NSP with error code 403 and for the reason Forbidden.
    The selected virtual host was 0 .
    What can I do?
    Please select a valid URL.
    If you do not yet have a user ID, contact your system administrator.
    ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:netweaver_NSP_00-v:0-s:403-r:Forbidden
    HTTP 403 - Forbidden
    With Sap Logon i can login correctly. Does anyone have an ideia how can i access through a web browser?
    Thanks
    Edited by: Pedro Bessa on Jul 7, 2009 12:17 AM

    thanks,
    thanks!
    I have done that:
    and activated: 'sap/bc/gui/sap/its/webgui right click on each relevant service and activate it'
    is it the only service to activate, because I have errors on the url : http://localhost:8000/sap/bc/gui/sap/its/webgui?sap-system-login-basic_auth=X&sap-client=000&sap-language=EN
    My Error:
    Note
    The following error text was processed in the system NSP : Template interpretation cancelled, syntax error.
    The error occurred on the application server shai1_NSP_00 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
          SYSTEM-EXIT of program SAPLSMTR_NAVIGATION

  • How to uninstall SAP NetWeaver 7.01 ABAP Trial Version on Vista

    I can't  uninstall SAP NetWeaver 7.01 ABAP Trial Version on Windows Vista, because installation didn't finish

    Hello
    Open the Start.html file in the SAP folders you have downloaded. You can see Uninstall instructions on right hand side and then go to c: drive and delete all the SAP folders you see and then in registry  . It is good to follow those steps to uninstall bcoz even u uninstall there will be some traces in you system
    Regards
    Anil

  • SAP Netweaver 7.01  ABAP Trial version

    Hi Gurus,
    I have installed the SAP Netweaver 7.01 ABAP trial version from SDN. I changed the settings of the Workbench Browser selection in SE80 to had checked the enhancement info system and all other checkbox.
    se80  Utilities->Settings
    I got a error saying only 8 can be selected. But by mistake i clicked on the enter and now it goes to dump.
    now whenever I execute SE 80 i get the following dump
    Error analysis                                                                       
        An exception occurred that is explained in detail below.                         
        The exception, which is assigned to class 'CX_SY_CREATE_OBJECT_ERROR', was not   
         caught in                                                                       
        procedure "IF_WB_LAYOUT_MANAGER~GET_NEW_WINDOW_STYLE" "(METHOD)", nor was it     
         propagated by a RAISING clause.                                                 
        Since the caller of the procedure could not have anticipated that the            
        exception would occur, the current program is terminated.                        
        The reason for the exception is:                                                 
        The dynamically specified class "CL_AMO_REPOSITORY" at CREATE OBJECT neither     
         exists as                                                                       
        local, nor as global class in the system, or is overshadowed by a local          
        data type of the same name.                                                      
    How can I revert back to the original settings for SE80? I cannot change the settings since when i give the SE80 transaction it goes to dump.
    Any help in this regard is highly appreciated.
    Thanks,
    Nilesh

    Hi,
    For Trial versions, the correct forum for this question would be
    Software Downloads
    @Moderators, please move to the "Trials, Previews & Other Downloads" forum if appropriate.
    Regards,
    Debasis.

  • SAP NetWeaver 7.01 ABAP Trial Version - You can only work in client 001

    Hi BI Experts,
    I have installed SAP NetWeaver 7.01 ABAP Trial Version and I could successfully login into the system.
    When I run RSA1 Tcode I am getting error message You can only work in client 001. Can some please advice.
    I appreciate all your input.
    Regards,
    OSR.

    Hi,
    Since BI tables are cross-client, BI can work only in one client. By default BI is configured for client 001.
    If you want it in different client, you change it in BWMANDT field of RSADMINA table.
    hope it helps.
    Regards,
    Pruthvi R

  • SAP Netweaver 7.01 ABAP Trial Version not working

    Hello,
    I am trying to load SAP Netweaver 7.01 ABAP Trial Version on VISTA.  I am having two problems.
    1.  When I try to start NSP using SAP Management Console, I am prompted with a pop-up window labeled "WebService Authentication."  The first parameter for User is automatically filled with value Home-PC\RESkater.  It also asks me to enter Password.  I do not know what to enter for password.
    2.  After I installed the SAP Netweaver 7.01 ABAP Trial Version, the download instructions says that I can sign on to system via web gui using  http://localhost:8000/sap/bc/gui/sap/its/webgui?sap-client=000.  However, I receive the error message stating "local host is not set up to establish a connection on port 8000 with this computer."
    Can anybody give me any helpful tips that might resolve these issues for me?
    Thanks.
    Rae Ellen Woytowiez
    Edited by: Rae Ellen Woytowiez on Jul 5, 2009 6:35 AM
    Edited by: Rae Ellen Woytowiez on Jul 5, 2009 6:36 AM

    Hi Rae,
    Regarding issue 1, you to startup NSP, you need to remove the Home-PC\ portion of the username.  So your username should only be RESkater.  Then the password should be the same as the password that you use to logon onto the operating system for user RESkater.
    Hope this helps...
    Thanks,
    Miguel

  • Error  installing  7.01 ABAP trial version, during step "start instance"

    Hi,
    I have installed 7.01 ABAP trial version on WINDOWS VISTA.
    During the step 24/27 "start  instance" I have this error:
    INFO 2009-10-05 03:17:19.165
    Disconnect from message server (PC-Andre/3900) succeeded.
    INFO 2009-10-05 03:17:19.181
    Connect to message server (PC-Andre/3900) succeeded.
    INFO 2009-10-05 03:17:19.181
    Disconnect from message server (PC-Andre/3900) succeeded.
    INFO 2009-10-05 03:17:19.306
    State of instance NSP/DVEBMGS00 changed from ABAP: STARTING to ABAP: STARTING.
    WARNING[E] 2009-10-05 03:17:19.321
    CJS-30105  Instance NSP/DVEBMGS00 reached state SHUTDOWN after having state STARTING. Giving up.
    ERROR 2009-10-05 03:17:19.337
    FCO-00011  The step start with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|10|0|NW_CI_Instance_Start|ind|ind|ind|ind|2|0|start was executed with status ERROR .
    INFO 2009-10-05 08:46:25.193
    An error occured and the user decided to stop.\n Current step "|NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|10|0|NW_CI_Instance_Start|ind|ind|ind|ind|2|0|start".
    Please help me.
    Thanks.
    Andrea

    Thanks peoplel!!!
    The problem was the file "host" :
    in  the file C:\Winnt\system32\drivers\etc\hosts enter:
    <permanent IP address> <host name>
    For example:
    10.10.0.10      yourhost
    I was forget to change it.
    Bye!!!
    Edited by: zerofolle on Oct 6, 2009 12:24 AM

  • SAP NetWeaver 2004s ABAP Trial Version - error code = 200

    Hi all,
    installation of SAP NetWeaver 2004s ABAP Trial Version
    which was attached to the book ABAP-Objects ends again and again with
    ProductException: (error code = 200; message="Java error"; exception = java.lang.Exception)
    Attached you find information about
       1) Host-file
       2) Network connections
       4) Error - Log
    It seems that the      [#     [#]
    echo                7/tcp
    echo                7/udp
    discard 
               9/tcp    sink null
    discard             9/udp    sink null
    systat             11/tcp    users            
         #Active users
    systat             11/tcp    users                  #Active users
    daytime            13/tcp
    daytime
               13/udp
    qotd               17/tcp    quote                  #Quote of the day
    qotd               17/udp    quote   
                  #Quote of the day
    chargen            19/tcp    ttytst source          #Character generator
    chargen        
    4) == E R R OR  L O G ================================================
    (Jan 1, 2007 1:07:15 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err,
      an error occurred and product installation failed.  Look at the log file D:SAPNSPlog.txt for details.
    (Jan 1, 2007 1:07:15 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err,
    ProductException: (error code = 200; message="Java error"; exception = java.lang.Exception)
    STACK_TRACE: 15
    ProductException: (error code = 200; message="Java error"; exception = java.lang.Exception)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllInstallationSteps(StepWrapperInstallFiles.java:177)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.install(StepWrapperInstallFiles.java:268)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    (Jan 1, 2007 1:12:17 PM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err,
    An error occurred and product uninstallation failed.  Look at the log file D:SAPNSPlog.txt for details.
    (Jan 1, 2007 1:12:17 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err,
    ProductException: (error code = 200; message="Java error"; exception = java.lang.Exception)
    STACK_TRACE: 15
    ProductException: (error code = 200; message="Java error"; exception = java.lang.Exception)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source
    == Remark to threads ========================
    Thread a)
    "I found it is very useful to have a clean system" => not applicable to me
    Thread b)
    deals with removing relics of previous installations => hints considered but error still appears
    Thread c)
    not applicable to me

    Hi all
    I've read your entrys.
    Saw that the solution is missing.
    It can be found in the manuals:
    1. Download the "Registry Clean Tool for SAP NetWeaver 2004s ABAP" and use it.
    2. Download the latest Version of "SAP NetWeaver 2004s ABAP" and un-rar it.
    3. Install the "Microsoft Loopback Adapter" an activate it.
    4. Retry to install.
    Summary:
    So the error 200 was caused for the first time from trying an installation without a Loopback Adapter, and after that from trying to re-install without cleaning the registry.
    Now its working fine.
    Thomas

Maybe you are looking for

  • Problem displaying japanese character set in shopping cart smartform

    Hi All, whenever users are entering some text in Japanese character set while creating a shopping cart in SRM, the smartform print output is displaying some junk characters!! even though the system is unicode compatable, did any one have problem ?? T

  • The application was not installed unknown error: 0xE8000050

    The application was not installed unknown error: 0xE8000050. How to fix please???

  • How do I send back the randomly selected checkboxes values back to servlet

    Hello All, Assume I have a table of N rows with two columns. I will have one checkbox on column-1 and zero or more on column-2. Column-1 may represent categories and column-2 represents associated things. Just like below: Column 1 Column 2 Books HFSJ

  • DataGuard in a Cluster

    The standby and production are on different cluster nodes, but in case of a failure on the same node. I know that is possible to run the production and the standby on the same server using the lock_name_space parameter. Is it possible to use DataGuar

  • SAP - BO XI Newbie

    I know a bit about both SAP and BO both and wanted to understand how these products would work. 1) If I have a) BI Query and b) Oracle Table/View can I combine them in the same BO XI universe and have user report against that universe using either Vo