ABAP version

Hi,
I am working on java.I have strong skills in abap.
Now I started refreshing my ABAP skills.I want to shift towards NetViewer or ABAP.
I want to know the present version on ABAP/4 and where can i get this information.
And where I can get free mysap download or mini sap.
can u please help me
Thanking you in advance

Hi,
You can get the Mini SAP version when you buy some books from SAP Press.
You can also download the Netweaver version from the download area of SDN.
https://www.sdn.sap.com/sdn/downloadarea.sdn
Under WebAS you can find 'New! Sneak Preview SAP NetWeaver 04 - Web Application Server 6.40 Java, ABAP, MaxDB, Developer Studio'.
Thanks
Vinod

Similar Messages

Installation Procedure for SAP Netweaver 2004 Trial ABAP Version

Hi,
I am new to ABAP, and want to Install SAP Netweaver 2004 Trial ABAP Version on my system. I downloaded the software from SDN. If any one knows the Installation Preocedure, please send me it will be very helpful for me.
Regards,
Mithun Birabinth.

Please check the SMP:
http://service.sap.com/instguides & navigate accordingly.
PS:
Award points if your question is resolved.

SAP NetWeaver 04s SP7 Java Version And SAP NetWeaver 04s ABAP Version

Hello,
I would like to ask if anyone has installed both Java and ABAP version on PC/Notebook.
What did you install first and why?
When installing the second of the two, did you need to turn off or detete any part of first installation?
Any advice on the installation of both versions on one PC would be appriciated.
Thank You,
Spiro.

Hi. I have installed NW04s ABAP stack and the NW04 Java stack(slim edition) on my laptop. I installed ABAP first, then the java stack. I did do it the other way around, but the ABAP stack would not load successfully, so remember ABAP first, then java. No, did not turn off or delete anything from the abap installation.
Regards,
Rich Heilman

Differences between ABAP versions

Hi all,
I need help about Differences between ABAP versions. plz help me where i can get it.

hi,
check this links
http://www.sapdesignguild.org/resources/r3_history.asp
http://www.sapdesignguild.org/resources/web_history.asp
http://ifr.sap.com/index.html
http://www.sap.info/index.php4?ACTION=noframe&url=http://www.sap.info/public/en/article.php4/Article-187163df9cbccc5273/en
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
cheers,
sasi

Still confused with different ABAP versions

Hi folks,
does anybody have an idea where I could possibly find a comparisson of the different ABAP versions (ABAP runtime environments) in order to find out the changes especially coming from 4.6C to the next versions SAP WAS 7.0.
Especially in ABAP Objects I expect some changes. Could anybody post a good source on that?
Thanks for your help
bye
Torsten

Not sure where to find that stuff but here is a little rundown.
One thing about classes, is that there is now the Friends tab where you can define a friends relationship to other classes
There has been quite a lot of changes to the ABAP runtime including the inclusion of a full web server and the ICF(Internet Communications Framework) This allows for such things like Web Services, BSP(Business Server Pages) and Web Dynpro.
Other things that are new are Shared Memory Objects, Persistent Objects, ABAP Units, Adobe Interactive Forms, the New Debugger, and the new ABAP Editor.
This is just to name a few.
Regards,
Rich Heilman

ABAP version error of sneak preview

hi all,
I am trying to install ABAP version in the sneak preview and this is the error i get at step 5 of 17
please help.
Thanks
Pradeep
ERROR 2005-11-21 03:10:20
MOS-01021 PROBLEM: C:/DOCUME1/PRADEE1/LOCALS~1/Temp/sapinst_exe.5476.1132538565\sapcar.exe -xvgf C:/SAPNetWeaver04SneakPreviewABAP/Installation_Master\IM01_NT_I386\../../SAP_NetWeaver_04_SR_1_Kernel_MaxDB__ID__51030720\K01/NT/I386/SAPEXE.SAR, -R C:\usr\sap\NSP\SYS\exe\run returned with '28'. CAUSE: See output './SAPEXE.SAR.log'. SOLUTION: Solve the CAUSE and retry.

Are you running the installation from the desktop? If so, please extract the RAR file to C:/ and run the installation from there. I think your path is too long.
Regards,
Rich Heilman

Authorization problem in Sneak preview 2004s ABAP version

Hi all,
I have successfully downloaded the sneak preview 2004s ABAP version, I hv created the client 001 for BI. when I try to create DataSource or Transformations system saying You have no authorization for DataSource and when i try to create infosource, it is saying You are not authorized to display the InfoSource,but system allow me to created info cube.
Any in puts plz.
Regards.
Hari
Pages: 1

Hi Rich,
thx a lot for your quick reply.The problem is i cannot find it.
I run SE80 trx, i create a simple WD application and a view. I select the view, then and i have three "frames" (from the left):
- The standard SE80 tree
- In the "layout" tab of the WD application, i have the browser preview (but it shows the standard IE error page) and a window with the UI of the windows, designed in a tree (rootuielementcontainer).
But nothing about view designer.
I have sapgui 6.40 patch lev.20
Thx a lot
Andrea

XRPM - CPRXRPM - ABAP Version upgrade

Hello all;
The Abap version of CPRXRPM component is reflecting on 0008 at the back end if we check via SPAM.
Whereas on the portal the same is being reflected as version SP02 under "About xRPM" details page. whereas the Java component is on SP07.
Why is this discrepancy and will if affect any of the components functioning on the portal and other related components on higher patch level ?
Also i am facing lot of issues wherein certain fields like external id, description etc are not reflected under portfolio mgmt > administration page. Due to which i am unable to save the portfolio item and proceed ahead.
Are this issues related to ABAP version not upgraded.
Finally how do i get the ABAP component to be reflected on portal with consistent patch level atleast with Java component ?
Please revert back.
Regards;
Pratik

Hey,
>We are planning to upgrade XI 3.0 to PI 7.1
System needs 64 bit OS for PI 7.1 , Will not support 32 bit OS
Customer Adapters and Adapter modules have to be adjusted and redeployed
Java Proxies have to be redeployed because JAVA JVM is installed during upgrade and JAVA JDK not supported at all in PI 7.1
>upgrade specific to Proxy development?
For ABAP Proxy Nothing, If the interfaces does not functions, The regeneration of proxy will do
Cheers
Agasthuri Doss

Calling web service from ABAP - version 4.6C

Hi,
I would like to know how to call a web service from ABAP. Version is 4.6C. Any help would be greatly appreciated.
Thank you,
Rekha

Hi Rekha,
Please go through these..
call web service using ABAP
http://help.sap.com/saphelp_nw04/helpdata/en/a0/da0710b6560a4e80fb94f3f712dfc0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e9/ae1b9a5d2cef4ea4b579f19d902871/frameset.htm
Hope these help you!
cheers,
Prashanth

ABAP versions issue

Hello. I'm with a problem here in my job....
Months ago, I developed an enhancement in ABAP. Than, created a request and sent it to QA and PRD environment.
But there was an error in the code. So I solved this error, created a new request, and sent to QA/PRD...
Now, three days ago. The error of the first version comes again...and I verified that the version of the code is the first version in PRD. But nobody deleted the changes in the second version and created new requests....
I think, someone back the version to the first, direct in PRD, is there a way to do this??? If no, someone know what it could be???
Regards,
Thiago

> Months ago, I developed an enhancement in ABAP. Than, created a request and sent it to QA and PRD environment.
> But there was an error in the code. So I solved this error, created a new request, and sent to QA/PRD...
This is good. no problem
>
> Now, three days ago. The error of the first version comes again...and I verified that the version of the code is the first version in PRD. But nobody deleted the changes in the second version and created new requests....
>
You may not have imported the second version in PRD. You may be released but not imported into PRD. Go to your Development system where you have created your transports then loop for the transport log to see where this is sitting.
Also try to compare your DEV system with PRD using remote comparision to see what happend and what is the difference.
> I think, someone back the version to the first, direct in PRD, is there a way to do this??? If no, someone know what it could be???
It is impossible to retrieve the version in PRD system.
Finally, Please look all versions in Development system as you wont see all the transports in PRD. You will see only active version PRD.

BW reports (BEx Reports) in Sneak preview ABAP version

Hi All,
Is it possible to display the BW data in BEx reports with help of Tr code RRMX in Sneak preview ABAP trail version.
When i try to run Trcode RRMX system says Please install Excel as viewer..
Please let me know , how we can display data.
Regards.
Hari

Hi,
May be your SAP GUI, BW components are not installed. Reinstall SAP GUI and select BW checkbox during installation. Also you need to have ur excel macro setting (tools->macro->security) as either low or medium.
check this note: 160995-BEx Analyzer: Excel Add-ins interfere at the start.
If you are in 7.0, you need to unstall your front end and reinstall the 7.0 front end.
You may troubleshoot using below link
Troubleshoot the SAP NetWeaver 2004s BI Frontend Installation
Hope it helps.
Regards,
Srikanth

Automating ABAP version comparisons across systems

Hi Team,
I am trying to create a report which would accept a given transport number and compare the object inside (ABAP code/transformation) to its active version in the production systems and spot differences, if any.
I know this can be done via Se38 - Utilities - Versions - Version Management - Remote Comparison.
I also know that ABAP4_CALL_TRANSACTION can be used to call SE38 but I am unable to figure out how to pass the input of object name and go further into drilldowns via this report/program.
Any inputs would be greatly appreciated.
Thanks
Purnima

Purnima Viswanath, indeed ZARC does not have this feature. Yet. As you know, this is an open source solution, and anyone - including you - can contribute to it. And when I say you, I mean specially you. Why? Because most developers who contributed to a specific open source project were users first. They had recognized a true value in it, but also some gaps that would make the leap from a good project to a great one. This has happened to Linux, Wordpress, SAPlink and so many other projects. And I truly deeply believe that ZARC can make this leap at some point, but it needs contributors.
So I invite you to add this (very important, in my opinion) piece of functionality. And if you think you need a better understanding on ZARC's architecture or anything else related to ZARC, please feel free to contact me and I will happily help you help ZARC.
I wrote ZARC for a very personal/selfish reason. Then I decided to improve it's architecture and share it so other people like you can also benefit from it. Now it's your turn. Please, use ZARC as an accelerator or shortcut for solving your real need. And please, share it with us all, so other people can benefit from it, just like you did.
Thank you!

SAP Netweaver trial version - ABAP version

Hi Everyone,
In August I had downloaded SAP Netweaver 2004s ABAP edition. It was a 90 day triay version. Due to lot work could not work on it much. Now if I want to work it, its not connecting, because the 90 day trial version has expired.
I wanted to extend the trial version license but while requesting for it, its asking for the hardware key. Can anyone please help me in getting this trial version work somehow.
thanks,
Prashant.

Hi everyone,
I had gotten licence key. I can not export the new license key. The message is like this "The library key has not inialization yet".
And I tried to manual install license , entry expired date and copy paste LKEY="MIIBOgYJKoZIhvcNAQcCoIIBKzCCAScCAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGCAQYwggECAgEBMFgwUjELMAkGA1UEBhMCREUxHDAaBgNVBAoTE215U0FQLmNvbSBXb3JrcGxhY2UxJTAjBgNVBAMTHG15U0FQLmNvbSBXb3JrcGxhY2UgQ0EgKGRzYSkCAgGhMAkGBSsOAwIaBQCgXTAYBgkqhkiG9w0BCQMxCwYJKoZIhvcNAQcBMBwGCSqGSIb3DQEJBTEPFw0wNzA2MTcwOTA4MTBaMCMGCSqGSIb3DQEJBDEWBBShRlTv0agGURSkPkh1POPGKZuAzjAJBgcqhkjOOAQDBC4wLAIUE". but the message "Invalid Key".
How to solve the problem?
Thanks
Efano

SAP Netweaver ABAP version supports JAVA?

Hi all,
Im using SAP Netweaver ABAP sp12 version. Is this version supports JAVA applications to deploy on it?
With Regards,
Sreehari

Hello Sree,
If u want your java applications to run in your system then you should have Java AS too. you can install Java AS as an Add-on installation and u can find a lot of materials for this thro sdn as well as help.sap.com
regards,
Anand

Trial ABAP Version any help please?

Hello,
I am interested in setting up the trial version ABAP.
I have downloaded the files and extracted them, but after extracting part I into a folder, the size of the folder is 2.78GB -- I extracted part II into the same folder, and the file size is now.. well the same, 2.78GB.
Both files pre-extraction match the size of the download page, exactly. This is a little strange?
I would like to know if by Windows XP professional- will this include Win XP home edition? or am I better to run on Windows Server?
I intend to run on Virtual Box, and would like to know if the 22GB for installation is inclusive of the 2.78GB installation files, do those files need to be copied to the intended installation drive?
I like the idea in the other thread about creating a partition separate from the OS and installing there.
Any help would be greatly appreciated.
Roger

Hello Roger,
it is enough extract like this: Place the files to the same folder and extract "SAPNW7.0ABAPTrialSP12.part1.rar" only. The first and second file are required to install the complete trial software package.
I have heard here in SDN installation on XP is no problem. I use by myself even older OS; Windows 2000 Professional. My installation is on separate partition. It is working.
Good luck by your installation.
Peter

ABAP versions

Hi
can anyone tell the first version of the SAP ABAP and also how many versions are released till now.
Thanks and Regards,
kumari.k

HI Venkat
i could not open the link u sent it is showing the following while iam opening it.
Network Error (dns_unresolved_hostname)
Your requested host "solutions.sap.com" could not be resolved by DNS.
For assistance, contact your network support team.
Proxy Name: edsia-pl4proxy04-1007265
can u suggest me any alternate for this.
Regards
kumari.k

ABAP version

Similar Messages

Maybe you are looking for