ABAP WD, Multiple Row selection in table control without using Crtl key

Hi all,
I am displaying the records using the table control, i have to select the multiple records in the list <b>without using Crtl key</b>.
How do i solve this?
Thanks

Hi,
you should set the table parameter selectionMode to multi or multinolead
than you can select multiple records,
these you can retrieve: lt_selected_elements = node->get_selected_elements( ).
also see this <a href="https://forums.sdn.sap.com/click.jspa?searchID=4209200&messageID=3544158">thread</a> for info
grtz,
Koen

Similar Messages

ABAP WD, Multiple Row selection in table control

Hi all,
I am populating and displaying the records using the table control, i have to select the multiple records in the list and want do some deletion,selection,so i could not select the more than one record.
How do i solve this?
Please give me your valuable suggestions.
Thanks

Hi ulli,
thanks for your quick reply,
now its working for me but i have to press the 'CTRL' key and select the row, for selecting the multiple rows.
one more thing i wanted some methods for "DELETION", "SELECTING ALL RECORDS","DESELECTING",in the displayed list.
plz suggest me..,
thanks and regards
kamal

Need to get the row selected in table control without ay action

Dear Team,
I have a requirement in which I need to pass the row selected of a table control to a variable.
Here I need to get the row selected with out any other action
then the action of selection of a row.
Is it possible to read table control values using FM DYNP_VALUES_READ.
thanks in advance,
regards,
Sai

HI,
Sai Kumar Potluri
I tried in IDES it working.
Here is the code.
REPORT ZPRA_TC_D.
TABLES : SCARR.
CONTROLS TC TYPE TABLEVIEW USING SCREEN 1.
DATA : SELLINE TYPE I,
       SELINDEX TYPE I.
DATA : ACT LIKE SCARR-CARRID,
       ANT LIKE SCARR-CARRNAME.
DATA : ITAB LIKE SCARR OCCURS 0 WITH HEADER LINE.
CALL SCREEN 1.
*&      Module STATUS_0001 OUTPUT
*       text
MODULE STATUS_0001 OUTPUT.
SET PF-STATUS 'ME'.
* SET TITLEBAR 'xxx'.
SELECT * FROM SCARR INTO TABLE ITAB.
ENDMODULE.                 " STATUS_0001 OUTPUT
*&      Module MOV OUTPUT
*       text
MODULE MOV OUTPUT.
MOVE-CORRESPONDING ITAB TO SCARR.
ENDMODULE.                 " MOV OUTPUT
*&      Module USER_COMMAND_0001 INPUT
*       text
MODULE USER_COMMAND_0001 INPUT.
CASE SY-UCOMM.
WHEN 'BACK' OR 'UP' OR 'EXIT'.
LEAVE PROGRAM.
WHEN 'SEL'.
GET CURSOR FIELD SCARR-CARRID LINE SELLINE.
SELINDEX = TC-TOP_LINE + SELLINE - 1.
READ TABLE ITAB INDEX SELINDEX.
ACT = ITAB-CARRID.
ANT = ITAB-CARRNAME.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0001 INPUT
In Flow Logic.
PROCESS BEFORE OUTPUT.
MODULE STATUS_0001.
LOOP AT ITAB WITH CONTROL TC.
MODULE MOV.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP AT ITAB.
ENDLOOP.
MODULE USER_COMMAND_0001.

Multiple row selection in table control...

hi...
i can select one row from table control and display in a list..
the same thing i want to do for multiple lines...
thanks..

use the table control wizard to create a table control on the screen...while going thru the steps, there will be a screen which asks you about the selection column (this is a single character field in your internal table). on this step there is a selection option for single/multiple selection of rows....
to access the selected records, use...
loop at itab where sel eq 'X'.
endloop.
where
<b>itab</b> is the underlying internal table for table control and <b>sel</b> is the name of the selection column
or if u already have a table control on screen...double click and open the properties window...there u can see radio buttons None, Single and Multiple for line selection. choose the multiple option.
rgds,
PJ
Message was edited by: Priyank Jain

Multiple row select for table not working..

Hi Experts,
I have a table in ABAP Web Dynpro where I have enabled the multiple row select functionality. I can select all and deselect all. I can also select a block of adjacent rows of table by choosing first and last by pressing Shift key.
But I am not able to select multiple individual records for that table.
I tried the same thing in different system and it works fine there.
Please let me know if we are missing some standard plugin or we need to enable this in some settings.
System where the issue is:
SAP_APPL: release 600, level 18
SAP_BASIS: Release 700, level 22
System where it is working fine:
SAP_APPL: release 604, level 8
SAP_BASIS: release 701, level 8
Regards,
Anand Kolte

Hi
Press CTRL key and Select records, you can select multiple records, continuously or randomly your desired selection.
Cheers,
Kris.

Multiple row selection for table element

Hi,
I have a requirement where I require to select multiple rows from a table element in a WD for abap application.
I have defined a node with cardinality and selection set to 1..n.
The contex node contains 4 fields : emp_name, pernr, manager and position.
The attributes of the table element for selectionmode is set to 'multi' and 'selectionchangebehaviour' is set to 'auto'.
I have defined an action on the 'onleadselection' event.
The code in this method also includes the statement 'lo_el_team_view->set_selected( EXPORTING flag = abap_true ).'
When I execute the application only 1 row is highlighted at any one time when I select it. You can select multiple rows by holding down the 'ctrl' key but I want to avoid having to do this. Is there anything I have missed out causing multiple row selections not to be all highlighted.
Thanks in advance for any assistance.

Hi raj,
you can try the following code in the 'onleadselect' event of the table,
create one attribute ' Flag' of type WDY_BOOLEAN under the node which has been binded to the table.
DATA lo_nd_node_tab1 TYPE REF TO if_wd_context_node.
DATA lo_el_node_tab1 TYPE REF TO if_wd_context_element.
DATA lo_elements TYPE wdr_context_element_set.
DATA lo_ele_select_new TYPE REF TO if_wd_context_element.
DATA lv_deselect TYPE wdy_boolean.
DATA lv_flag TYPE wdy_boolean.
DATA lv_select TYPE wdy_boolean.
DATA lv_index TYPE i VALUE 0.
lo_nd_node_tab1 = wd_context->get_child_node( name = wd_this->wdctx_node_tab1 ).
get the current selected element
lo_ele_select_new = wdevent->get_context_element( name = 'NEW_ROW_ELEMENT' ).
CHECK lo_ele_select_new IS NOT INITIAL.
check whether it has been selected or not
CALL METHOD lo_ele_select_new->is_selected
    RECEIVING
      flag = lv_select.
lo_ele_select_new->get_attribute( EXPORTING name = 'FLAG' IMPORTING value = lv_deselect ).
check whether element has been previously selected or not,if not, set the flag to select it
IF lv_select IS NOT INITIAL AND lv_deselect IS INITIAL.
    lo_ele_select_new->set_attribute( name = 'FLAG' value = 'X' ).
if selected currently and previously then set the flag as false,in order to delect it
ELSEIF lv_select IS NOT INITIAL AND lv_deselect IS NOT INITIAL..
    lo_ele_select_new->set_attribute( name = 'FLAG' value = ' ' ).
ENDIF.
CALL METHOD lo_nd_node_tab1->get_elements
    RECEIVING
      set = lo_elements.
according to the falg, select and delect the elements
LOOP AT lo_elements INTO lo_el_node_tab1.
    lo_el_node_tab1->get_attribute( EXPORTING name = 'FLAG' IMPORTING value = lv_flag ).
    IF lv_flag = 'X'.
      lo_el_node_tab1->set_selected( abap_true ).
      lo_nd_node_tab1->set_lead_selection_index( lv_index ). * this statement deselects the lead selection index*
    ELSE.
      lo_el_node_tab1->set_selected( abap_false ).
      lo_nd_node_tab1->set_lead_selection_index( lv_index ).
    ENDIF.
ENDLOOP.
I hope this resolves your problem.
Thanks,
krishna

Multiple row selection in table contrl with wizard

Hi all,
i developed a table control using wizard . i have the plus and sub buttons that came when i udes wizard to delete or adda row.
My question is : It allows me to delete one row ata time is there way where i can delete mutliple rows in a single attemp i.e i wiuld select multiple rows at one and click the delete row and it need to delete all selected rows , now it allows me to select only one row at atime
Thanks all in advance
Suchitra

HI,
Set the Mulbiple row selet propery at the table control level to get this working.
Thanks
mahesh

Multiple row selection in Table

Hi Experts,
I have created one popup with a table inside that.
My question is how can i add multiple rows, enter value in those rows and on clicking the
copy button all the value in the rows will be copied into the main view.
All the rows should be editable.

Hi Armin,
Thanks a lot for the reply.
In my application when i am selecting the multiple rows which i entered earlier in the popup window, it's getting populated into main window.
But in main window only one input field is there,so only the fiest record is getting displyed after selection.
Rest of the records i am not able to display in the main window.And the problem is i can't add more than one input field in main window. Rest of the values will be passed into R3 through coding but it can't be displayed on screen.
So please advice me on these two scenarios.
1 . How to populate multiple row values(input fields in popup window with value enterd by user) into
main view. In main view only one input field is there.
2 . How to pass all the selected values from main window to R3 by webdynpro coding.
All the values coming from popup need to be passed even though only one value is displayed.
Here the input field in main window is mapped to one model attrribute.
Thanks a lot.

To insert a new row in a table control without affecting the other rows

Halo experts,
I have a Table control TCTRL in a program .
The lt_tab contains two cols A and B
In change mode of the transaction Col A is in display mode and Col B is in change mode
When i press the + button to insert a new blank entry .I need a blank row with both col A and col B input enabled w/o affecting the display of above and below rows of table control
In PBO module of subscreen 101
LOOP AT lt_tab WITH CONTROL tctrl.
MODULE tctrl_status.
endloop.
In the user command of 0101
i am writn
When 'INS'.
INSERT INITIAL LINE INTO itab.
Inside MODULE tctrl_status.
IF lt_tab IS INITIAL.
    LOOP AT SCREEN.
      IF screen-name = 'COLA'.
      screen-input = 1.
ENDIF.
    ENDLOOP.
      MODIFY SCREEN.
endif.
but the problem here is still the Col A is in display mode and Col B is in change mode after output
.Here modify statement is happening but it does not update the TCTRL-COLS-Screen structure for the col A ( which I have set statically while designing the screen ).I dont want to make the entire row in edit mode only the inserted row ( for both Col A and Col B) and the rest shud remain as it is
Thanks
Kallu

hi Naveen
I have made my tctrl input disabled for both the columsn and
I have a module before the PBO loop where I set the like
module set_tctrl_status.
IF gv_ok_code NE gc_disp.
    LOOP AT tctrl-cols INTO gs_cols.
      IF gs_cols-screen-name = 'ColB'.
        gs_cols-screen-input = 1.
        MODIFY tctrl-cols FROM gs_cols INDEX sy-tabix.
      ENDIF.
    ENDLOOP.
This is just to set the Col B in edit mode when in change and create status.
But if i press the INS button for that change i am coding inside the loop endloop of the pBO like
if itab is initial.
LOOP AT tctrl-cols INTO gs_cols.
gs_cols-screen-input = 1.
MODIFY tctrl-cols FROM gs_cols INDEX sy-tabix.
endloop.
But the problems i it is setting the enite rows as input enabled . I want tos et only that row inpur enabled

Add rows to a Table object without using database .

Hi everyone ,
I'm using visual web javaServer faces framework in Netbeans IDE 6.5.I want to use a Table and bind data to it row by row ,without using database.I dont know how i must do it. i searched and find nothing exept dataprovider that as i undrestood, it use just database to bind data to a table.
i have a string in a loop that i want to devide it to several substrings and these substrings will be each field of each row and at the end of the loop,the number of rows are equal to reapiting the loop.
I'll appreciate any help in this matter
Best Regard,
Fatemeh

My Dataout variable contains a long string of personal information. Information such as Name, Family name, Fathers name, Date of birth, National code, Nationality.
I want to make a personal information table with above mentioned information, whereas Name, Family name, Fathers name, Date of birth, National code, Nationality will be my column values. The number of its row depends on the times that the loop is repeated.
I can make a JTable by defining an array[6] as above, but this table doesnt appear in Visual Web javaServer faces framework. I want to be able to do what JTable does in the Table component in visual designer. Can anybody help me?
Thanks in advance

Update Multiple Rows in same table after Update using Trigger

If i update ACK or ReJ column it should update all the other columns with the same GlobalID.
create table t_emp(
empid varchar2(10) not null,
empname varchar2(50),
Dep varchar2(50),
ACk number(5),
REJ number(5),
globalID varchar2(10) default '0' );
insert into t_emp t values ( 'TM01' , 'Logu','Java',null,null,'01');
insert into t_emp t values ( 'BT01' , 'Logu','Java' ,null,null,'01');
insert into t_emp t values ( 'Oracle01' , 'Logu','DBA' ,null,null,'01');
insert into t_emp t values ( 'Google01' , 'Logu','Design' ,null,null,'0');
insert into t_emp t values ( 'AR02' , 'Uthaya','CRM' ,null,null,'02');
insert into t_emp t values ( 'RIL02' , 'Uthaya','Java' ,null,null,'02');
insert into t_emp t values ( 'EA02' , 'Uthaya','DBA' ,null,null,'02');
insert into t_emp t values ( 'TCS02' , 'Uthaya','Java' ,null,null,null);
insert into t_emp t values ( 'P05' , 'Krish','.Net' ,null,null,'05');
insert into t_emp t values ( 'TCS06' , 'Krish','.Net' ,null,null,'06');
insert into t_emp t values ( 'IBM06' , 'Krish','.Net' ,null,null,'06');
CREATE OR REPLACE TRIGGER t_emp_update
AFTER UPDATE
ON t_emp
FOR EACH ROW
DECLARE
t_Ack varchar2(15);
t_Rej varchar2(15);
t_globalID varchar2(10);
t_empid varchar2(10);
BEGIN
t_globalID := :new.globalID;
t_Ack := :new.ACk;
t_Rej := :new.REJ;
t_empid := :new.empid;
IF t_Ack is not null then
DBMS_OUTPUT.PUT_LINE('t_Ack := ' || t_Ack || ', t_globalID := '|| t_globalID ||', t_empid := '||t_empid);
update t_emp set ACk = t_Ack where globalID = t_globalID and empid != t_empid;
end if;
IF t_Rej is not null then
DBMS_OUTPUT.PUT_LINE('t_REJ := ' || t_Rej || ', t_globalID := '|| t_globalID ||', t_empid := '||t_empid);
update t_emp set Rej = t_Rej where globalID = t_globalID and empid != t_empid;
end if;
END;
update t_emp v set Rej = 1 where empid = 'TCS06';
If i Update empid = 'TCS06' it should Update Internally all rows with same globalID (06).
select * from t_emp order by empname,globalID;
I am getting some errors in this trigger .
ORA-04091: table TEST1.T_EMP is mutating, trigger/function may not see it
ORA-06512: at "TEST1.T_EMP_UPDATE", line 17
ORA-04088: error during execution of trigger 'TEST1.T_EMP_UPDATE'
I am using ORACLE 10G
Kindly Help me ...

Avoiding Mutating Tables
http://asktom.oracle.com/pls/asktom/ASKTOM.download_file?p_file=6551198119097816936

Reg Selection of Multiple Rows in a Table

Hi all,
I have to select multiple rows from a table and have to display those selected records in another table in the next screen.
The problem is, when I am selecting the records in a table, selection should not be allowed on some records based on a condition. Is it possible with the default selection mode of webdynpro. If so, Please tell me how can we disable the selection of certain records in a table(using the default selection mode provided by webdynpro)
Else, if we have to use check boxes for selection(in case of my problem), please do help me out in how to disable the selection of certain records in a table(using check boxes for selection).
Please help me out. Its urgent...
Reward points guranteed.
Regards,
Murthy.

HI Narayana,
Multiple selection property is specific to a table, not for a tableElment(ie. for a row), so u cant set some of the rows as multi selected and some as node
U can use Checkbox for this purpose. Based on the condition u can make the check box as enabled and disabled
To achieve this, Create 2 boolean variables inside table node, one for checkbox value(Let it be <b>CBValue</b> .Bind this to checked property of Checkbox) and other for enabling and disabling Checkbox(Let it be <b>CBReadOnly</b>. Bind this to readonly property of CheckBox).
At the time of creation of table elements, as per the condition, u can control the selection as
IPrivate<View>.I<Table>Node tNode=wdContext.node<Table>();
for(int i=0;i<5;i++)
IPrivate<View>.I<Table>Element tEl=tNode.create<Table>Element();
tNode.addElement(tEl);
tEl.setCBValue(false);//Unchecking Checkboxes initially
if(condition=non selectable)
tEl.setCBReadOnly(true);
else
tEl.setCBReadOnly(false)
Regards
Fahad Hamsa

Selecting multiple rows in a table

Hi All,
I have one problem with selecting multiple rows in a table.I tried with setting table property-selectionMode as Multi, but i dinn't get the solution.
please provide me solution for this.
Thanks & Regards,
Sreelakshmi.

HI
Int leadSelection = wdcontext.nodemodelnode.getLeadSelection();
for(int i=0;i<wdcontext.nodeModelNode.size;i++)
    if(wdcontext.nodeModelNode.isMultiselected(i) || leadSelection ==i)
           String name = wdcontext.nodemodelnode.getnameelementatindex(i).getName();
           String address = wdcontext.nodemodelnode.getaddresselementatindex(i).getAddress();
           String age = wdcontext.nodemodelnode.getAgeelementatindex(i).getAge();
        Create a method for the Table Property onLeadSelect() where you can open a popup window
         Create a value node and with attributes same as Table attributes and then set the values of the table
         to the value node attributes.
Thanks

JDev 11g-Multiple Row Selection Table-Ctrl+A error

Hello All,
Jdeveloper : Studio Edition Version 11.1.1.2.0, Build JDEVADF_11.1.1.2.0_GENERIC_091029.2229.5536
ADF Business Components : 11.1.1.55.36
Java(TM) Platform : 1.6.0_11
Oracle IDE: 11.1.1.2.36.55.36
SOA Composite Editor: 11.1.1.2.0.12.16
Versioning Support: 11.1.1.2.36.55.36
I am trying to remove the selected rows from the table with RowSelection property set to Multiple. I am able to select the rows using by holding key board Ctrl key and click on the rows. The following code in backing bean successfully deletes the rows selected using this step.
public void removeGeoSpecs(ActionEvent actionEvent)
RowKeySet rowKeySet = getGmemTbl().getSelectedRowKeys();
CollectionModel collectionModel =
(CollectionModel) getGmemTbl().getValue();
for (Object facesTreeRowKey: rowKeySet)
collectionModel.setRowKey(facesTreeRowKey);
JUCtrlHierNodeBinding rowData =
(JUCtrlHierNodeBinding) collectionModel.getRowData();
rowData.getRow().remove();
But when i select all the rows in the table using Ctrl+A, all the rows got selected. I hit the Remove button, then after deleting the first row, getting the following error.
javax.servlet.ServletException: ADFv: Could not find row: USA 548 with key: oracle.jbo.Key[] inside parent: GeoSpecTVOIterator with key: null.
Caused by: java.lang.IllegalStateException: ADFv: Could not find row: USA 548 with key: oracle.jbo.Key[] inside parent: GeoSpecTVOIterator with key: null.
Here USA 548 is my first row's data. Please let me know if you want complete error stack.
During design time, While drag and drop the table i have not selected Row Selection check box as it sets property for single row selection. Table is inside the <af:panelCollection> . Here is the table source.
<af:table value="#{bindings.GeoSpecTVO.collectionModel}" var="row"
rows="#{bindings.GeoSpecTVO.rangeSize}"
emptyText="#{bindings.GeoSpecTVO.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.GeoSpecTVO.rangeSize}"
rowBandingInterval="0" id="GmemTbl"
partialTriggers=":::AddRowsBtn :::AddRangeBtn ::RemoveBtn :::SaveBtn"
rowSelection="multiple"
binding="#{backingBeanScope.GeoGrpSpecBean.gmemTbl}">
Here GeoSpecTVO is a transient view object which is not having query and not attached with EO.
I tried to fix this issue by myself and also searched for similar issues in the FORUM and google. But no luck... I very much appreciate all your inputs/pointers. Kindly let me know if you need additional information.
Thanks
Annadurai.

Hi Annadurai
I tried the same work around but still i am facing the issue, could you please help me.
public void deleteRec(ActionEvent actionEvent) {
// Add event code here...
RowKeySet rowKeySet = (RowKeySet)this.embossTB.getSelectedRowKeys();
CollectionModel cm = (CollectionModel)this.embossTB.getValue();
Row specRow = null;
ArrayList rowList = new ArrayList();
int listLength = 0;
ArrayList<Number> printReqLST=new ArrayList<Number>();
ViewObject vo1=null;
boolean flag=false;
for (Object facesTreeRowKey : rowKeySet) {
cm.setRowKey(facesTreeRowKey);
JUCtrlHierNodeBinding rowData = (JUCtrlHierNodeBinding)cm.getRowData();
specRow = rowData.getRow();
rowList.add(specRow);
listLength++;
for (int index = 0; index < listLength; index++){
specRow = (Row)rowList.get(index);
Number printReqID = (Number)specRow.getAttribute("PrintRequestId");
String PrintState = specRow.getAttribute("PrintState").toString();
if (PrintState.equalsIgnoreCase("PRINTED")) {
System.out.println("cann't delete");
FacesContext fctx = FacesContext.getCurrentInstance();
FacesMessage message =
new FacesMessage("Cann't Delete the selected row:" + printReqID);
message.setSeverity(FacesMessage.SEVERITY_ERROR);
fctx.addMessage(null, message);
} else {
System.out.println("delete");
flag=true;
specRow.remove();
if(flag){
System.out.println("before commit");
commitRows();
}

Select multiple rows from dual table

Is it possible to select multiple rows from dual table using a single select statement.
i.e., i want the out put to be
column_name
1
2
3
4
Edited by: vidya.ramachandra on Dec 14, 2009 8:24 AM

Aside from the fact you're responding to an old thread...
1002424 wrote:
While using CONNECT BY, I see it always leave behind one row.
Suppose I have a condition based on which I have to generate constant rows like
SELECT 1 FROM DUAL WHERE ROWNUM < N;
Here if N = 0, still it gives out single row.... you are obviously doing something wrong in your code elsewhere, because that SQL statement does not always return a single row...
SQL> SELECT 1 FROM DUAL WHERE ROWNUM < 0;
no rows selected
SQL>

ABAP WD, Multiple Row selection in table control without using Crtl key

Similar Messages

Maybe you are looking for