ABAP Webdynpro Rendering issues after ECC Upgrade

Dear All,
We recently upgraded ECC to EHP 7 (Netweaver 7.4) but our Portal is still at Netweaver 7.0 EHP2 SP16.
The ABAP Webdynpro iViews in Portal have the following issues. ( We use IE11).
1. The ABAP Webdynpro Table filtering is not working. When I click the filter button it does nothing.
2. The cursor in the Input fields reset back to the first position while typing and create a big mess.
Any help appreciated.
Thank you.
PK

Hi N_niki
There is no resolution as such.
We had raised a Customer message with SAP and were informed that this was expected as the procedure to execute the reports was changed in ECC when compared to 4.6 (technical changes) and hence this issue shall remain for some queries wherein the old changes need to be brought back using an option in the SAP Query.
Please refer to SAP Note # 723577 which could provide a better explanation for the issue.
Hope this helps.
Thanks
Vinodh Sudhakaran

Similar Messages

SAP Query selection screen issues after ECC upgrade

Hi all
We have a custom query created and assigned to a custom transaction code, which after upgrade to ECC 6.0 we find that the selection screen layout is different from what was available in 4.6C system.
All the fields required are available.
However, the sequence of the fields on the screen is different from the 4.6C after the upgrade.
Can anyone help identify the issue so that the issue can be resolved?
Thanks
Vinodh S

Hi N_niki
There is no resolution as such.
We had raised a Customer message with SAP and were informed that this was expected as the procedure to execute the reports was changed in ECC when compared to 4.6 (technical changes) and hence this issue shall remain for some queries wherein the old changes need to be brought back using an option in the SAP Query.
Please refer to SAP Note # 723577 which could provide a better explanation for the issue.
Hope this helps.
Thanks
Vinodh Sudhakaran

Font rendering issue after motherboard upgrade

This is a strange one.
Took hard-disc containing 10.6.7 out of a 2006 MacBook and put it in a 2007 MacBook.
Everything is working 100%, except for some slight differences in fonts. In some apps, they are rendered thicker (seeming only when shadowed), but in one web page (GitHub.com looking at chagesets), a section is rendered with weird Capital A with a box around it (like a WebDing of a picture of a key cap).
Of course, only Safari renders this page that way. OmniWeb and FireFox don't.
Any ideas?

Hi Nigel --
Welcome to Apple Discussions!
We're not staff, but other Mac users here, asking questions and sharing solutions.
We've got a font expert here, and here is Kurt Lang's opinion on capital A's in boxes:
Quote from Kurt Lang on this subject:
+A’s with boxes around them is always a sign of trouble with the main system+
+font, Lucida Grande.+
+Quick possible fix is to remove ALL font cache files from the system to see+
+if it's just bad cache data. For that, you need to use OnyX or other utility+
+which will remove both system and user cache files. A Safe Mode boot won't+
+work since it only removes cache data from the user account you do a safe+
+boot to.+
+If after that the problem returns, then Lucida Grande itself is damaged and+
+needs to be replaced.+

PKUNRE field not getting populated in 2LIS_13_VDITM after ECC upgrade

Hi,
We are seeing blank values for PKUNRE / 0BILLTOPARTY during extraction from 2LIS_13_VDITM.
We are experiencing this issue after ECC upgrade which went live recently.
We have applied note 580694 to correct missing fields in the billing extractor.
This field is sourced from VBPA/VBRP.
Our functional teams confirmed that VBPA/VBRP are updated properly and there seems to be no timing issue.
However, the record is landing in PSA with blank BILLTOPARTY.
Where could the problem be?
Is there any thing we missed?
Can any one throw some light if you have experienced this kind of an issue after upgrade.
Thanks a ton in advance,
Sandy.

Hi Sandy:
In my system I didn't find the Field PKUNRE on the VBPA / VBRP Tables, so my guess is that you're dealing with a Custom Enhancement, if this is the case the SAP Note 576886 - "Change to user-defined fields not extracted" might help you in solving this issue.
Regards,
Francisco Milán.
***Follow up note:
I double checked and found the Field PKUNRE on the Extract Structure for 2LIS_13_VDITM (using Transaction Code LBWE) so now I know that you're working with a Standard field and not with a custom ehnancement, the SAP Notes below address a similar issue to yours but they are related to Applications 11 and 12, not for App 13. I apologize for the confusion.
Note 621684 - "Fields PKUNRE and PKUNRG are not filled from delivery"
Note 379237 - "BW Content LE-SHP: missing partners in 2LIS_12_VCITM"
Edited by: Francisco Milan on Jan 28, 2011 12:54 PM

SO_OBJECT_SEND does not work after ECC upgrade

Hi Gurus,
I find a problem after ECC upgrade with SO_OBJECT_SEND.
This was used in a zprog and was wroking fine in 4.6 C.
When this prog is executed it sends mails to the users thru SOST/SCOT.
But in ECC , upon execution I did not see the mails in SOST.
The prog passes the User id ( type B) to the receivers table.The mail
is sent to Business workplace but not to SOST/SCOT.
Pls help gurus.

Hi,
Use type U instead of type B.
Type of RECEIVER entry.
The following values are permitted:
'B' : SAP user name
' ' : SAPoffice name
'C' : Shared distribution list
'F' : Fax number
'U' : Internet address
'R ' : Remote SAP name
'X' : X.400 address
Regards
Indu

Performance Issues after an Upgrade

Hello!
We are experiencing performance issues after we upgraded to a new version of Hyperion (11.1.2.1). At this point, I am not too sure about the actual causes for this degrade in performance but I am trying to narrow down the causes and need your inputs. Please help me with your ideas.
1) What could be the causes/factors for the performance to degrade after an upgrade?
2) Does the performance of a script depend on the user credentials i.e. who is launching the script? Whether it’s the super admin of the application/application owner or an application specific admin?
3) Does the performance of the scripts depend on the place you are launching it from? For example - will the performance differ if it’s launched from MaxL Vs EAS?
Please let me know your thoughts on this.
Thanks,
- Krrish

There are a number of bugs 12600557, 12675485, 12669814, 12698488 logged in for 11.1.2.1 - If you use Internet Explorer 8 and have data forms designed to use a large number of sparse dimension members in rows or columns, you may experience performance degradation when opening the data forms.
This has been fixed in Oracle Hyperion Planning, Fusion Edition Release 11.1.2.1 Patch Set Update (PSU): 11.1.2.1.101 which is available on My Oracle Support as Patch 12666861.
HTH-
Jasmine.

Customer exit is not functioning after ECC upgrade/support package

It seems our customer exit is not functioning after ECC upgrade/support package. I tried to activate the project again, no use. please help. Thanks! (see below for the enhancement info)
COZF0002 Change purchase req. for externally procured component
EXIT_SAPLCOZF_002
INCLUDE ZXCOZU02
*& Include           ZXCOZU02
CONSTANTS: lcc_eban(25)   TYPE c VALUE '(SAPLCOBC)EBAN'.
FIELD-SYMBOLS: <fs_eban>   TYPE eban.
DATA: l_fkstl TYPE prps-fkstl.
Move values from the LUW to the Internal Table
ASSIGN (lcc_eban) TO <fs_eban>.
If the field symbol is "NOT' empty then proceed
IF ( <fs_eban> IS ASSIGNED ).
if WBS work order, get cost center from PRPS
IF ( caufvd_imp-auart = 'ZM05' ).
    SELECT SINGLE fkstl INTO l_fkstl FROM prps
      WHERE pspnr = caufvd_imp-pspel.
    IF ( sy-subrc = 0 ).
      WRITE l_fkstl TO <fs_eban>-zzfistl.
    ENDIF.
if not WBS WO, move cost center minus leading zeros to funds center
ELSE.
    WRITE caufvd_imp-kostl TO <fs_eban>-zzfistl.
ENDIF.
ENDIF.

Did you mean set a break point in the follow code?(Include ZXCOZU02), I tried set a break point in this code, but It didn't stop .
*& Include ZXCOZU02
CONSTANTS: lcc_eban(25) TYPE c VALUE '(SAPLCOBC)EBAN'.
FIELD-SYMBOLS: <fs_eban> TYPE eban.
DATA: l_fkstl TYPE prps-fkstl.
Move values from the LUW to the Internal Table
ASSIGN (lcc_eban) TO <fs_eban>.
If the field symbol is "NOT' empty then proceed
IF ( <fs_eban> IS ASSIGNED ).
if WBS work order, get cost center from PRPS
IF ( caufvd_imp-auart = 'ZM05' ).
SELECT SINGLE fkstl INTO l_fkstl FROM prps
WHERE pspnr = caufvd_imp-pspel.
IF ( sy-subrc = 0 ).
WRITE l_fkstl TO <fs_eban>-zzfistl.
ENDIF.
if not WBS WO, move cost center minus leading zeros to funds center
ELSE.
WRITE caufvd_imp-kostl TO <fs_eban>-zzfistl.
ENDIF.
ENDIF.

Performance issues after iOS4 upgrade

hello everyone,
I had notices few issues after I upgraded my iPhone 3GS:
1- The screen is not rotating (when reading e-mails of flipping photoes).
2- The resolustion has decreased big time after the upgrade. Now the photos are shown in less resolution and they look hazy.
3- my Ipod is not working.
4- I could not restore my device via the itune.
my big question is there a real tangible benifit for this new upgrade?
I really appreciate if you can help me soon
thanks.

There are a number of bugs 12600557, 12675485, 12669814, 12698488 logged in for 11.1.2.1 - If you use Internet Explorer 8 and have data forms designed to use a large number of sparse dimension members in rows or columns, you may experience performance degradation when opening the data forms.
This has been fixed in Oracle Hyperion Planning, Fusion Edition Release 11.1.2.1 Patch Set Update (PSU): 11.1.2.1.101 which is available on My Oracle Support as Patch 12666861.
HTH-
Jasmine.

Web dynpro ABAP- small issue after EHC1 upgrade

Hi All,
We have a Web dynpro ABAP report and it was working fine before the EHC1 upgrade. After the upgrade we noticed that the row count in ALV greed was disappeared.
The report used to show 25 records per page and we were able to jump to the other pages by clicking on row count that was placed right below the report. Now report shows all the records and we only have scroll down option.
Any idea where to look/ how to fix this issue?
Regards,
Mike

In addition to applying that note, you also must deactivate Lightspeed rendering. To me that's too extreme of a thing to do just to get paginators. You loose the huge rendering performance improvements and it also means you can't use any of the new UI elements from 7.01.

WD ALV Issue after the upgrade

Hi,
We have upgraded the SAP ECC 6.0 systems basis component SAP BASIS 700 from support pack 10 to 20.
After the upgrade webdynpro ABAP ALV table rows are not getting selected when we click on the rows, But it is getting selected when we we use CNTRL+Click.
I would really appreciate if you can provide me a note or route cause for this issue.
Thanks
Basava

Hi Jawahar,
Below is my suggestion regarding your query:
Edit existing Job server and update the details regarding Local reporsitory and save it.
Now try to map the same job server in scheduled jobs and check it was working or not
Or Else
Create new Job server and assign it to local repository.
In this case you have to update your all real time & batch Job configuration.
Thanks,
Daya

Issue after solman Upgrade

Dears,
We were using solman 7.0, connected to ECC 5.0 server.
We configured all activities EWA,System Monitoring and all were working fine.
Now we upgraded solman to 7.01(EHP1) and R/3 to ECC 6.04 .
1 - My first concern is after upgradation it should automatically pick details but is is still showing ECC5 in product version.
We performed Read data from remote system also but still same issue.
2 - When I go to EWA or system Monitoring I only find Prd server there while in solution's logical component all dev,qas and prd servers are available.Earlier before upgrading it was showing all systems in EWA and system Monitoring.
Please suggest.
Shivam

Hello Shivam
For point #2 please look closely at the solution containing the systsem and make sure that 1) The Dev, QAS systems are included, and are highlighted greeen ( Meaning they are status "Put in Solution"). It sounds a lot like this setting is not done, therefore the systems would not show when you would try and use that solution in functions like EWA, BPMON, etc.
It sounds very much like when you create a new soltuion with PRD, QAS, DEV systems assigned, but only the PRD system is "Put in Solution" by default, so you explicitly need to right click the system in change/edit mode, and select "Put in Solution", then save.
Now why this might be the case after the upgrade, I don't have an answer, but it is worth having a check as the symptom fits this issue. I would advise you check the solution itself and ensure the DEV and QAS systems and in status "Put in Solution".
Hope this information is helpful.
Regards,,
Paul

ABAP webdynpro iView issue with Internet explorer

Greetings,
We are trying to integrate ABAP webdynpro with portal using the standard SAP webdynpro iView template, we are able to successfully integrate and display on portal pages.
However if we are using IE version 7.0 browser we do not have any issues, but when we try to use IE version 6.0 the webdynpro portal pages does not display any content. A workaround was to open up the IE settings and change the setting for Navigate sub-frames across different domains to 'enable' from 'disable'.
This fixed the issue.
Also we came across information that we can change the setting to force the portal to use the css from the ABAP backend by changing the iView property 'Supply portal stylesheet' from 'Yes' to 'No'. Does this affect the portal behavior in rendering content in MS IE.
Please let us know if there are any other methods to overcome this issue, as this will affect many of our users.
iview isolation is of type 'URL'
page isolation is set to 'Embedded'
Portal page used is default framework type not webdynpro type
thanks,
Sudhir

Greetings,
This issue was fixed.
I found this blog helpfull
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/wdabap/general%2btechnical%2baspects
thanks,
Sudhir
Edited by: Sudhir Sidd on Jul 23, 2008 5:42 AM

IPhone syncing issues after iTunes upgrade

Hi
I just upgraded to iTunes 8.1.1 for Mac. During the install I got a kernel panic and had to restart. iTunes seems to be installed fine. When I connect my iPhone I get messages like "some content will not be copied to the iPhone as this computer is not authorized" or such like. So now several apps, videos and music has been wiped from the iPhone.
I tried authorizing the computer but I just get "This computer is already authorized".
there does not seem to be any particular link between the erased content. Some was purchased on the Mac and some on the iPhone, all from the iTunes store. Before I updated iTunes everything synced fine.
I can d/l the apps again direct to the iPhone but I can't find a way to get the missing music and videos back on the iPhone. Very annoying.
Would re-installing iTunes help?
Any ideas?
Thanks
Chris

Hi Chris,
Try highlighting the one of the songs that will not sync in iTunes> cilck File> Get Info, check the account name and verifying you are authorizing the computer with correct account.
If the issue persists, try removing the SC Info folder as shown here: http://support.apple.com/kb/TS1389
If you still see the issue after removing the SC Info folder, try reinstalling iTunes as shown here: http://support.apple.com/kb/HT1224
-Jason

IP Phone 7921 / 7925 roaming issues after WLC upgrade from Version 7.2 to 7.3 and / or 7.4

Hi,
We have a customer which is using a Cisco WLC 5508 and 3502I APs. As he used the 7.2.103 release, There were no issues with VoWLAN. Now he needed new APs and ordered the 2602I. To use them he needed to upgrade the WLC to a 7.3 or later release. After the upgrade, he now encounters problems while roaming with the phones. The phones were tested with FW 1.4.1, 1.4.2 and 1.4.3.
Configuration is set according to wireless voice design guides (VoWLAN DG 4.1, 7921 Deployment Guide). A Cisco TAC is also in progress, but they seem to be uncertain whether it is a wireless or CUCM issue, but I don't see a reason why it should be the CUCM when the only thing changed is the WLC Software Version.
Is there anybody who is aware of such issues and can offer help?
Thank you in advance.
Best regards,
Patrick

Hi,
we had a TAC ticket open with this customer and after some time, the TAC gave us the advise to use this release and the problems are now solved.
So for others having the same issue: If you only need to support the 2600 APs, stay with the latest 7.2 release as there are some issues with the 7.3 and 7.4 release. If the customer requires HA, AVC or any of the new features + wireless voice, be very careful as it seems that the newer releases are having problems with that. I hope that Cisco will fix this very soon.
regards,
Patrick

Performance issue after PT Upgrade.

Hakan and Team ,
We recently moved from PT 8.48 TO PT8.51.18 on CRM 8.8 Application.
After the upgrade, we tremendously saw big performance issues with PeopleSoft CRM Application. It freezes almost every day and all their work-force (call center representatives) go idle. It significantly impacts their productivity and eventually losing revenue.
can you please suggest few suggestion or DOC that will help us to improve performance on application and DB side.
Deatils :-
SQL SERVER 2005
Windows 2008 R2

Hi,
Performance is always a difficult one to tackle.
It can be at so many levels, DB, Appserver, Webserver, CPU, RAM, Infra, etc.
At OOW2012, David Kurtz gave a great highly detailed presentation on this subject: CON9210 - Performance Tuning for PeopleSoft Administrators
http://www.myexpospace.com/oracle2012/smupload/scloader.cfm?SCID=257daa92-a6e8-411a-9806-2c22e56687d3
See if you can apply some of the keypoints from his presentation.
Regards,
Hakan

ABAP Webdynpro Rendering issues after ECC Upgrade

Similar Messages

Maybe you are looking for