ABAP WebDynPro User Interface Elements not shown on layout while designing

Hi,
When I create a new custom ABAP WedDynpro, the UI Element library is not shown on the view layout.
I have tried a lot of options in exploring this.
Kindly help me
Thanks
Sai.

Have you followed the instructions in the online help:
For the layout editor in the View Designer, all the services specified in Active Services in SICF for Web Dynpro ABAP must be activated. More information: SAP Notes 1009930 and 1008689
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/43/e86de5008b4d9ae10000000a155369/frameset.htm
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/46/d28dfa34bb12bee10000000a1553f7/frameset.htm
The view designer is a web application itself and your system must be properly setup for web access for this to work. Also look at your Fully Qualified Domain Name setup:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/67/be9442572e1231e10000000a1550b0/frameset.htm
Although a nice feature, the view deisgner is not required for building Web Dynpro Applications. You can do 100% of the activities with the view designer turned off by working with the UI element tree on the right side of the page. You can right mouse click and use the context menu to access most functions. I'm sure that you want to get the view designer working, but until then you can still function.

Similar Messages

User Interface option not shown

Just installed Adobe Creative Cloud ->Flash Professional CS6 --My question is, I'm trying to change the user interface to dark grey. the program installed in white. When I go to Edit->Preferences->General there is no "user interface" option. Anyone know how to fix this?

Hi,
You can install any CC application if you have a valid creative cloud subscription. Please try the following
1. Install Adobe Creative Cloud desktop application from https://creative.adobe.com/products/creative-cloud
2. Login with your Creative Cloud credentials
3. Click on the Apps section where you will see the list of cc products for installation under FIND NEW APPS category
4. You should find Flash Professional CC and Mobile Device Packaging for installation
Thanks!
Mohan

Coldfusion dev installer wont work - "installer user interface mode not supported..."

i just downloaded the os x version of coldfusion 7 mx
developer edition (for the thrid time making sure the download
wasn't corrupt) and extracted the zip and launched the installer by
double-clicking it. the install screen pops up where it lets you
choose what language and i press ok. almost instantly i get an
error message to pop up that says... "Installer user interface mode
not supported. Unable to load and to prepare the installer in GUI
mode."
umm... what?!
does anyone have any idea what's going on and why the
installer is misbehaving?! thanks!
: : michael

and the answer for others stuck on this...
the problems is an installanywhere bug where if the anything
in the directory path contains special characters like "!" or "#" ,
it causes problems with the install. in my case, the directory path
had a "!" in it... hope this helps someone else out!
: : michael

Identity managent user interface is not available

when i try to acces user administration i get following error.
A required service for the identity management user interface is not available. Contact your system administrator.

See OSS note 869852 - Central Note For UME Web Dynpro UIs (user Admin in Portal). Topic #5 Troubleshooting discusses some possible solutions. We have found that sometimes, a complete shutdown and restart of the server works. Also, our Basis guys stopped and then restarted application com.sap.security.core.admin in the visual administrator and then the User Admin functionality was available for awhile until the portal was stopped/started for backup. Our Basis group is going to look into this further and I will post any additional info that we find. Would appreciate it if you would do the same.

User interface elements

in the 'configure virtual form for table' part in the tutorial entitled performing inserts, updates and deletes, it's wriiten 'select the user interface elements in the table component, right click and choose Configure Virtual Forms'. but i can't find any 'user interface elements'. can anyone tell me how to get this out so that i can configure the virtual forms. thanx.

Hi,
The "user interface elements" refer to the components namely textField1, dropDown1, textField2 and textField3. Select all of these components either in the designer view or in the Outline window. Once selected right click on one of the components and you will get the option Configure Virtual Forms.
Hope this helps
Cheers
Girish

Interface mapping not shown in directory search help

Hi,
I creatd a interface mapping in repository with message mapping. but when i configure the directory for receiver determination .. the interface mapping is not shown when i click the search help.
pls any one help me .
thankx,
shree

Hi Shree,
Three checkpoints:
1. Make sure you have entered the correct outbound and inbound interfaces.
2. Make sure you have activated your interfaces and mappings.
3. Make sure the cache is up-to-date (you can refresh cache by transaction sxi_cache).
Hope this helps.
Regards,
Hart

User pictures are not shown when users are added to person field in custom list

Hi,
Recently we have migrated our intranet from SP2010 to SP2013. We upgraded User profile service application, My sites and Intranet site to new environment. We haven't upgraded sites to use SP 2013 templates due to some business decisions. Everything
is working fine and as expected.
There are few lists in our environment where we have added users in a persons fields and allowed to show their pictures with details along with name. these user pictures are not being shown on to the page. After looking in picture property I found that "white
Space" in a picture library name is replace by %2520 instead of %20 (/user%2520photos/profile%2520pictures).
I tried reproducing problem on a new team site with SP 2010 template and it is reproduced however it is not occurring for a team site with SP 2013 template.
Any suggestions would be very helpful for resolving this issue. Thanks in advance.
-Amol Meshe

We are experiencing the same issue. We get a /User%2520Photos/Profile%2520Pictures/ path anytime we use the people picker field with the option to display picture or the picture and details option.
EDIT: This is only a problem on the list view. If you open the display form the image shows just fine. I can't see any setting view Edit Page and updating the web part that contains the list data to correct this.
Michael Allen (.NET and SharePoint 2010 Developer)

User Interface Template not displaying correctly

On some machines the user interface template is not displaying correctly (x is appearing instead of the images that make up the UI template). It does not seem to be a permissions related issue, as the same user can view the UI template on a different machine. It also doesn't seem to be a browser definitions issue as a different user on the same machine can view the UI template. Which leaves me at a loss for ideas...

Where are your images being used in the UI template stored? I like to place my images in directory:
<portalMidTier>/apache/apache/htdocs/img
Then from within the UI template I can relatively reference the images as /img/logo.gif
Regards,
Candace

Module pool screen element not shown

Hi,
I have a module pool with table control.
I have added a new field to the internal table and included it in layout-checked properties and it is active/shown in output and input enabled
Also, when I checked in PBO debugging, loop at screen, when the screen element is this field, active/input/output = 1
I have activated the program/generated it/logged off from system and logged in again (to take care of refreshing the screen)
The internal table has values for this field.
When I execute the screen directly instead of module pool program, field is shown in table control
But when I execute the module pool program, this field and heading are not shown in table control but empty space allocated for this field is shown.
May I know how can I resolve this.
Thanks!

Hi Vasu,
Go through this [Sample|http://help.sap.com/saphelp_nw04/helpdata/EN/9f/dbac5e35c111d1829f0000e829fbfe/content.htm].
Regards,
Maruthi

InDesign CC User Interface Preferences not sticking

You're not my father, you killed my father! I'll never join you!
Help I don't want to join the DARK side. InDesign won't remember my user interface preferences. I switch to light, close the app, and it goes back to dark (medium dark) next time I open. I am on Windows 7.
Anyone else notice this (mis)behavior or have a solution?
Ben Dupre

Bob, thanks.
I didn't install any updates today. Would that happen without consent?
I did notice my recent file menu is also gone though. Is there a config file I can save that can be reapplied after an update?
Ben

Shared Component User Interface Templates not available for page use.

Hello.
I created a new User Interface Template using the wizard under shared components. All it's supposed to do is display a header image on the page. I can click on the title under User Interface Templates and it will display fine. If I try to use that template, it will not display as an option under Display Option use custom template LOV under the Main tab of page modifications. Shouldn't it be available here for selection? I couldn't find any access grant options under Shared Components that might have explained this problem.
Thanks.
Kurt

Does anyone else have this problem? How did you fix it?

Just started using firefox seriously. my user interface does not look like the one in the 'tour'. please help

i downloaded firefox a long time ago but havent used it extensively because i liked chrome. but recently chrome is just too difficult and if there is an issue i cant speak to anyone. so i am trying firefox. i went to take the user interface tour and there is suppose to be a button on the right hand side to help with bookmarks but my 'version' doesnt have that. was wondering how i get that and if i may have the wrong version.
also....i cant seem to find where to turn autofill on and right now its not working except with the occasional email address.
and one more thing....all streaming videos...tv, utube, art instruction..trailers...all get chunked up. nothing ever runs smoothly. and i am paying to get good download speed.
i would appreciate any help on these three issues.
thank you

About the bookmark button:
*[https://support.mozilla.org/en-US/kb/customize-firefox-controls-buttons-and-toolbars Customize toolbars]
About versions of Firefox:
*[http://www.mozilla.org/en-US/firefox/new/ Last Firefox Version]
About the videos:
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you.

User Interface does not load SRP527W

Hi,
Apologises if this question has been asked before.
We have a SRP527W router, and for some odd reason the web interface does not load.
The device has been reset to factory defaults countless number of times and sometimes I can get in but than once you save something you cant get back in.
I have completed the following steps
1. Tested via multiple browsers, (Firefox, Chrome & IE)
2. Reset router to factory defaults
3. Router can be pinged on 192.168.15.1
4. Installed Firefox extention to test with previous IE versions
5. When I managed to get into the router, I ran a restore with a backup config that worked
6. Telnet function is blocked but dont have the ssh details. (tried: admin admin, admin password, cisco cisco, cisco password)
7. add http://192.168.15.1 to the safe list
The odd thing is sometimes the web interface loads and sometimes i just get a blank page.
Any suggestions?

You are welcome
Now that you are able to login, either move or delete enough files to get at least 10 GB free, 15 would be better.
A tool to help with that is OmniDiskSweeper.
Allan

Some interfaces are not shown in the sxmb_moni

Hi all,
We are facing the following scenario: we have one interface in XG1 (development environment) which is very simple: it consists of a sender File and a receiver IDOC. The file format has been double checked and apparently is what XI defines but when we execute, we can not see anything in the sxmb_moni and if we look into the adapter monitor -> file adapter, we can see that the sender seems to execute successfully but the receiver still shows the following: no message processing until now. So no IDOC is generated and no xml message can be seen in the TCODE sxmb_moni.
Also we have some interfaces that has file receivers and we have the same problems. So, for any reason, the receivers are not working properly. I have refreshed CPACache but the error persists.
It is preventing a whole team of doing some tests and as the golive date (March-April) is approaching it is impacting us in a strong way.
Could you please give us some support?
XIAFUSER is getting locked periodically (i see it in the SLD user management), do you think it will be the main reason of this?
Thanks in advance and kind regards

Hi,
Go to Tcode SXI_CACHE for refreshing the Directory Caches. Go to Adapter Engine link and refresh the same
Go thru following threads may be useful.
Message not seen in SXMB_MOni
Missing Messages - in RWB but not sxmb_moni
For Adapter Engine you can do as below.
http://<host>:<port>/CPACache/refresh?mode=full|delta
In addition to above..
Go thru following link about Processed XML messages.
http://help.sap.com/saphelp_nw2004s/helpdata/en/c4/9a5c3bab977239e10000000a114084/frameset.htm
Just add on info.
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/6baeae38391a6ee10000000a11466f/frameset.htm
Hope this helps..
Regards,
Moorthy

Report - Primary User is name not shown

Hey there,
I've got a problem with the reporting Server functions.
When creating a report containing "Primary User Name (Calculated)" there is no data shown within this column. If I add "Is Primary User Calculated?" I get "YES" for every Device name that has its Primary user detemined already - but the rows for "Primary User Name (Calculated)" stay empty.
The Information from "Is Primary User Calculated?" seem to be right, when checking Devices/Workstations/... within ZCM, and the Primary User Names are shown there.
Does anyone encounter this problem before and/or got a solution?
regards,
alex

schiggieh,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

ABAP WebDynPro User Interface Elements not shown on layout while designing

Similar Messages

Maybe you are looking for