Abap Why Delivery no. can't creat batch number when PGI?

Hello.
Now I am working on PGI. I use the enhance to create default batch. But the delivery no. batch number can't be created when PGI.
It only can be created when LV01N creating dn no.
So can you offer me some help? So bad.....
Thanks for your help.

Hi,
You can follow a different approach. Send the output of the Smartform to the spool.
You have a Function Module to read the spool and convert it to PDF . Then there is one more function module to attach the PDF and send it as a mail.
You need to configure SMTP in Tcode : SCOT.
Search the forum with emailpdfattachment
You have umpteen postings available.
Pls reward if useful.
Regards,
Laxman Nayak

Similar Messages

How can mass create batch classification for many material batches? ?

Hi Experts,
In our system , there are so many material batches which have not been classified，see by
BMBC Tcode.
That means these batches has no values in the batch class. I know we can create
classification for these batches with MSC2N Tcode.
But there are so many batches which have not been classified,more then 2000.
It is not possible to create classification for every batch with with MSC2N once a time.
So how can I create batch classification for so many batches once a time?
How can I mass create batch classification for so many batches??
Thanks for any reply!

Hi,
Please be aware that SAP does not support the use of batch
input in the classification system. SAP recommends you use BAPI's for
example in your case BAPI BAPI_OBJCL_CREATE and BAPI_OBJCL_CHANGE
would be able to help. For more information, please have a look at the
note: 943559 - Point 2 and 13. Point 13 references the note 1083986.
I hope this helps!.
Best Regards,
Arminda Jack

Any delivery note can be created if transfer materil in storage location

hi
any delivery note can be created if transfer material between storage location in the same plant. Or can i do the GR for that

Hi,
This might help you.
311 Transfer posting storage location to storage location in one step
The quantity is transferred from unrestricted-use stock of the issuing storage location to unrestricted use in the receiving storage location.
Possible special stock indicators:
E, K, M, Q
See also 321, 343, 349, and 455 for other stock types
313 Stock transfer storage location to storage location in two steps - removal from storage
The quantity is transferred from unrestricted-use stock of the issuing storage location to stock in transfer in the receiving storage location.
Possible special stock indicators:
None
315 Transfer posting storage location to storage location in two steps - placement in storage
In the receiving storage location, the quantity is transferred from the stock in transfer to the unrestricted-use stock.
Possible special stock indicators:
None
Reward points if useful
Regards,
Amrish Purohit

After installing, why is lightroom asking for a serial number, when I am a CC subscriber

after installing, why is lightroom asking for a serial number, when I am a CC subscriber - I am logged in to my CC account

I have the same issue. I downloaded for my 30 day trial. My time was up, I started my CC subscription and I'm still prompted for a serial number.

Can I withold my number when texting using iPhone 3 in the UK with O2

Can I withold my number when texting using iPhone 3 in the UK with O2

BlueEyedVivi12 wrote:
Is the iPhone 5 (at least on verizon, which mine is) really unlocked?
The sim slot in all Verizon iPhone 5's is officially unlocked out of the gate. The phone will work just fine in the UK using any compatible carriers's sim.
If it will work in the UK, what type of sim would I need? I think I saw the mention of a nano sim- is that correct?
You need a Nano sim card which you can get from any supported iPhone carrier in the UK.
You don't need to do anything with Verizon but fulfill your existing contract.
Bear in mind, warranty/support will only be valid in the US, & the phone will not support LTE using any UK sim.

Check a UDF of batch number when I create Goods Issue or Delivery

Hello,
I manage my items with batch number and I want to block the creation of all Goods Issue or Delivery in function of the value of a UDF (created the OIBT table).
I think I can achieve this by using the stored procedure SBO_SP_TransactionNotification, but I never used it and I don't know if (and how) I can retrieve the selected batchnumbers of my documents.
Is it possible to do so, or do you have any better suggestions???
Thank You,
Xavier.

Hi Xavier,
You can find some additional information about the SBO_SP_TransactionNotification stored procedure here:
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e991e2b9-0901-0010-0395-ef5268b00aaf]
The stored procedure only returns the following;
- Object type
- Transaction type
- Num_of_cols_key (number of columns in the primary key of the object)
- List_of_key_cols_tab_del (the list of the columns in the primary key)
- List_of_cols_val_tab_del (the values of these columns)
So the stored procedure doesn't directly return the information you want. You would have to link this with a DI application to access the document in question using the value of the primary key returned by the stored procedure. (Or through using an SQL query also using the primary key returned by the SP).
Please note however, that SBO_SP_TransactionNotification is designed for notification purposes only. SAP can only support any issues arising out of use as a notification mechanism; the use of this stored procedure to block transactions or work as an authentication step are not supported. Please see SAP note 1011154 for more information.
Regards,
Niall

How to create Batch number manually

Hi,
We have already done 105 without batch number. But we need to create the batch number for the quantity which is already inwarded in 105.
Please let me know how this can be done.
regards
Suresh

if your material is batch managed, then SAP forces you to enter a batch number (or assign an internal batch number) while doing the 105 movement.
As this was not the case for you, I assume you missed to maintain the batch management indicator in material master.
In this case you have to make current and previous period stock zero, then you can set the batch mangement indicator. Maybe you have to delete open documents too (SAP will tell you this in an error log when you try to set the indicator)

Can we change batch number to any unrestricted stock

Hi experts,
while confirming production order of Finished good, material batch number is mistyped by pp person. qm person also blindly passed the material in the system. stock was posted to sales location as unrestricted stock,which is ready for sale. Is there any way to assign the correct batch number to the unrestricted stock, or to correct the mistyped batch number? pls.revert.

Hi,
Another way (this is a quick fix way, and you will have to see that this does not break anything elsewhere in the system) for to do this is create the batch using MSC1N, and transfer the stock from the incorrect bacth to this new batch. You can use 311 (use the same source and receiving Sloc, just change the batches) or also 309 (again, use the same material number, different batches). The reference will be available in the MB51 list. Please check if there are any Z reports that pick the bacth number from the Order table, becuase this will refer to the incorrect batch only.
I would recommend that you refer this first to your FI and CO person to see that there are not detrimental effects. If the material is on Standard price this should not be a problem.
Hope this helps.
Nishant

SAP RM: How can I create a Node when the node is not visible for the user

Hi,
Product: SAP records Management for Public Sector
Version: 7.00
is it possible to create a instance node when the model not is not visible for the active user?
I looked in the CL_SRM_XML_REC_MODEL but every methode I used gave me no results with the special user.
Regards and thanks for every beginning
Fanninger Thomas

Hi,
here an example.
When I use the method CL_SRM_XML_REC_INSTANCE->IF_SRM_XML_POID~GET_ALL( POID_TAB COUNT_USER_REST COUNT_POID_AUTH ).
When I used the user with no right for viewing the invisible nodes I get no elements in the tabelle POID_TAB and 38 in the value COUNT_USER_REST.
So did any one know a solution you can I create a nodes and change the restriction for the new node with the normal user?
Regards
Fanninger Thomas
Edited by: Thomas Fanninger on Feb 5, 2008 8:15 AM

Says it can not create temporary folder when Itry toopen the download

when I try to run the firefox download a box opens saying can not create temporary folder

Interesting. I tried one more time - instead of saving it to my hard drive, I ran it directly off the Mozilla site and it installed....
Something is definitely wrong with the Mozilla "save as" and THEN run process....

Missing batch number when running MI31

HI experts,
Please help me investigate this issue:
We create PID using t-code MI31. After creation, we found, for a material, all of its batch numbers were successfully included in PID, except for only 1 batch. I investigate the missed batch and found that no PID has been created for it before, therefore according to standard logic it should not be excluded from MI31. And this batch is normally used for production.
Besides missed batch, there are also some missed materials in MI31. These materials have stock in system.
Any one can advise me what may be the problem here?
Thank you very much.

Hi Jurgen,
You are right. I have to commit that errors are due to our end users and myself. There's nothing wrong with MI31. Thank you very much.
Another question regarding to this issue: How many times in a fiscal year does SAP allow us to create PID for a specific material & batch number using MI31 WITHOUT selecting indicator "include material subject to PI" and "include batch subject to PI"?
Some said number of allowed times is 1 per year, some said other. Then I need a confirmation.
Thank you & regards,
Duc.

Why am I prompted for a serial number when trying to open an acrobat PDF?

I am being prompted for a serial number when I try to open a pdf. I just downloaded creative cloud, started with After Effects. I haven't downloaded any other apps. I made a pdf from an InDesign doc. This wasn't happening yesterday. After making the PDF, I am being prompted for a serial number. What serial number and why to open a pdf?

>just downloaded creative cloud, started with After Effects. I haven't downloaded any other apps
What program are you using to try and open the PDF?
Ask for serial number http://forums.adobe.com/thread/1234635 has a FAQ link

Can't see my number when call or send SMS

Hi,
I have followed the instruction on this page:
https://support.skype.com/en-us/faq/FA672/How-do-I-show-my-mobile-number-when-sending-texts-from-Sky...
I activated my number a month ago but still when I can someone from Skype or send them a SMS they don't see my number. They see a random number.
When I go to reactivatte my phone number it doesn't let me. It says it already has been activated.
What should I do?

If the user manual solutions do not work, take your iPod Nano in for repairs as you are still under warranty for hardware issues.
iPod Manuals

ABAP Proxy Generation -- Objects can be created only in SAP Package

Hi,
I am trying to generate ABAP Proxies. When i create a proxy for an interface(EMP_DETAILS_MI--outbound in my case), and assign it to package(created by developer), a pop comes up saying "Object can only be created in SAP package".
When i try to continue, it asks for an access key for that particular object.
Enter Key for the Object--R3TR-TABL-CO_EMP_DETAILS_MI When i register this object in servicemarketplace( by basis team) and get the license for this. It asks access key for another object R3TR-TABL-EMP_DETAILS_DT.
When i register this object it asks accesskey for
R3TR-TABL-EMP_DETAILS_DT_DETAILS
I fear if there is amy fault in my procedure. kindly let me know. I work on XI3.0 SP5 server.
Regards,
Siva Maranani.

Hi siva,
Iam in the same problem we want to create proxy in SAP namespace. Is there any workaround to create proxy in SAP namespace.
with Regards
shankar

Why portal server can't create an instance of axis.Service class?

Hi,gurus,
We developed a uwl custom connector,The time out occured in that custom connector.After adding the time out value from 30s to 300s,the problem still existed.
The code is like below:
String endpoint = "http://172.16.127.4:8080/appframe-web/services/WorkItemService";
Service service = new Service(); // time out code
Call call = (Call) service.createCall();
call.setTargetEndpointAddress(endpoint);
call.setOperationName("wisForPortal");
call.addParameter("userCode", org.apache.axis.encoding.XMLType.XSD_STRING, javax.xml.rpc.ParameterMode.IN);/
call.setReturnType(org.apache.axis.encoding.XMLType.XSD_STRING);
String temp = "36";
Object result = call.invoke(new Object[]{temp});
The time out occured when the portal server create an instance of Service class.Does that mean the server can't find the jars?
But the object declaration like "Service service=null;" is all right.
Any ideas?Thanks in advance.

I have a project called 'Default EAR' in my workspace.
But I can't add the JAR to the that project. These instructions are for WSAD 4, but I assume WSAD 5 is similar:
Go to menu File and select Import. Choose "File System" to import from. Specify "Default EAR" as your folder and select the jar file from the directory/browse prompt.
This is assuming your web app is connected to Default EAR and not some other EAR file. Also once you've done this, you will find that the jar file automatically becomes part of your build path. You didn't have to do anything extra to make that happen.

Abap Why Delivery no. can't creat batch number when PGI?

Similar Messages

Maybe you are looking for