Abaper with FI and SD Integration experience?

Hi Friends,
I was curious to know as to what is the role of an Abaper in integration of functionals modules of FI and SD?
What are the steps involved in integration and what kind of knowledge he should possess?
Regards,
MD

SD+FI tables names
Flow from SD to FI

Similar Messages

  • Problem with PRI and Nortel Integration

    We have a Nortel Option 81C connected to a 3825 MGCP gateway and we had a weird problem with it. The PRI looked fine from CallManager's perspective, but the PBX was showing that the first nine channels were in a Far End Make Busy state (FE MBSY) instead of being in IDLE state like CCM thought.
    I did some checking around and found a weird "fix" for the problem that involved enabling and then disabled D-channel service messages on the PBX, but I'd like to find out more about this problem. I got the fix from a guy who has a LOT of experience with Nortel and with Cisco, and he said that 99 times out of 100, an FE MBSY problem like this is going to be because of the Cisco side, not the Nortel side.
    I just did a bug search through CCM 4.1(3) and IOS 12.4(8) and I didn't see anything about D-channels being incorrectly reported as unavailable on PRI.
    Have any of you ever heard of something like this?
    Thanks!
    John

    John,
    Our 81Cs are long gone, but the only ISDN switchtype that worked flawlessly for us was NI. We tried DMS100, and saw your problem. Nortel sees NI as a carrier side protocol and will not allow an inbound NI call to tandem through to another NI PRI. This forced us move all PSTN PRIs to CCM gateways early in out migration, but worked out well. I believe QSIG will also work, but it was a $20k upgrade for our PBXs, so was not an option.
    Dave

  • OTL with Projects and Payroll Integration - Actual Costing

    How does the costing work when we have the OTL integrated with Projects and Payroll? (R12.2.4 functionality - Actual Costing)

    As explosion process is based on elements, it only applies to payroll. You can use this functionality with Projects and Payroll Timecard Layout, but project will get the non exploded hours.
    --Shiv                                                                                                                                                                                                                                                                                                                                                                                                               

  • What's up with Webservices and BPM integration?

    According to http://e-docs.bea.com/wli/docs70/design/intarch.htm, table
    3-1, webservices are a key component of the Integration architecture,
    which:
    "Provides sample code to support WebServices integration using
    WebServices technologies
    such as UDDI, WebServices Description Language (WSDL), and Simple Object
    Access
    Protocol (SOAP). WebLogic Integration provides the ability to invoke a
    WebService
    from a BPM workflow, enable a BPM workflow as a WebService, and to
    enable the
    Application View as a WebService. For an introduction to WebLogic
    WebServices,
    see the WebServices and XML Tech Track in the BEA dev2dev Online at the
    following
    URL:
    http://dev2dev.bea.com/index.jsp"
    The only thing which comes close to this description is the BPM Plugin
    for webservices, which is alpha code for WLI 2.1. To deploy this on 7, I
    have only seen a message here describing loosely what to do.
    So is this how we are expected to use webservices together with
    Integration? With alpha code that requires tweaking to work with the
    current version? Or am I missing something vital? The quote from the
    docs suggest "sample code", however the webservices plugin is not
    provided in source, so I don't see how it qualifies as sample code?
    Somehow I also don't quite understand how "sample code" can be construed
    as a "key component".
    So what's up with webservices and Integration?
    -Lasse
    (only speaking for myself in news!)

    Your comment about the lacking of web services in WLI is correct
    and a fundamental issue I have signalled to BEA already many
    months ago. I even followed the BPM course to make sure I did
    not miss an important point. The BPM course did not deal with
    webservices because it is not available. But the fundamental remark goes further
    because webservices also have a dynamic
    interface WSCI to behave within a choreography of webservices
    within a business process. BPM is still mainly workflow based
    and intracompany. This is not what is expected as business
    processes which are collaborative and a new paradigm alternative for applications
    conform BPML-WSCI or BPEL4WS-ws transaction.
    I still wait from BEA a confirmation that webservices and collaborative business
    processes according to (at least) one of
    the above standards will be included within the next version of weblogic enterprise
    platform due end of March 2002.
    Kind regards,
    Paul Meurisse
    Email : [email protected]

  • Freelancers with DPS and magazine design experience.

    We are looking for freelancers based in London with strong DPS and page layout experience to work on our market-leading iPad magazine.
    Please contact me @ [email protected] if you are interested.
    Thanks,
    Ben.

    I'm locking this discussion. Anyone interested should use the email address posted.
    Bob

  • REPORT WITH SALES AND PRODUCTIN INTEGRATION?

    HI,
       HERE I NEED TO DISPLAY THE SALES AND PRODUCTION INTEGRATED (FOR MAKE TO STOCK) LIST BY DAY WISE ,I AM NOT ABLE TO FIND THE TABLES FOR THAT.
    HERE LIST HEADER IS FOLOWING.
    MATERIAL CODE, MATERIAL DISCRIPTION, PRODUCTION QTY, PROD. VALUE, SALES(BILLING QTY, SALES(BILLING) VALUE.
    AND THAT LIST TOTAL PRODUCTION VALUE SHOULD EQUAL TO THAT PARTICULAR DAY TOTAL PRODUCTION VALUE,
    AND THAT LIST TOTAL SALES(BLIING) VALUE SHOULD EQUAL TO THAT PARTICULSR DAY TOTAL SALES(BILLING) VALUE.
    PLZ HELP OUT FROM THIS,
    REWARDS IN ADVANCE....
    REGARDS,
    NAVEEN

    Have you tried the txn code MC-Q or the report program RMCV0500.

  • Can somebody help me with Siebel and Fusion Integration

    Hi,
    I want to integrate Siebel with BPEL.
    I can't use the Oracle AS adapter available for Siebel for integration purpose.
    I have to integrate using web services.
    Can somebody help me out with any document of integration BPEL with Siebel using WebServices??

    Hi,
    Find attached the link/note for integration of BPEL with Siebel, hope this will be useful
    http://download-east.oracle.com/docs/cd/B31017_01/integrate.1013/b28999/intro.htm
    Oracle® Application Server
    Adapter for Siebel User's Guide
    10g Release 3 (10.1.3.1.0)
    B28999-01
    Rgds,
    Muru

  • Resource Utilization with TFS and PS Integration

    We've done Team Foundation Server 2012 and Project Server 2013 Integration. We're using Agile Model i.e. creating users stories and tasks at TFS side and synchronizing with Project Server. The synchronization is done correctly. Now we want to get
    resource utilization report but not coming correctly. I observed that all the tasks are getting added in project server with start date as the project start date of 28 Dec 14. Even if I work on any of the tasks today (30 Jan 15) and update the remaining
    and completed hrs on TFS side, the hrs are updated on Project server on 28 Dec 14.
    So the resource working today on TFS is shown as worked on Project Server on 28 Dec. I want to see a report where whatever hrs a resource filled in TFS today the project server should show utilization of him for today only and not in past.
    Thanks
    Dinesh

    Hi Dinesh,
    I am trying to involve someone to further look at this issue. There might be some time delay. Appreciate your patience and thanks for your understanding.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • The candidates must have WebLogic and OSB integration experience

    Can someone tell me what does the above line means.Is it talking about OSB experience or is it talking about integration of OSB with weblogic.If it is second one then what does it really mean.
    Can someone please forward me some documentation to get started.
    Thansk

    Well osb runs in weblogic.
    So i guess they mean you need to have some experience with weblogic itself (creating jdbc connections, queues, etc) and experience with oracle service bus (building the flows which could make use of the resources you create in weblogic itself)

  • Urgent : Search a Demo with B2B and Ebiz integration

    Hi all,
    I'm in a search for a Demo with a scenario for outbound or inbound flows, integrating Oracle B2B and Ebiz, if the Ebiz Adapter is used it will be great.
    Thanks for your help.

    If you are an Oracle employee then please get in touch with B2B PM's otherwise drop a note to my id (in my profile)
    Regards,
    Anuj

  • Help with PHP and FLEX integration

    Hello i was wondering how to use php sessions with flex, i
    need a way to have secure connections between flex and php.
    I am using a script i made to pass mysql commands/results
    between them, and i am currently passing the php session id with
    the transactions. But if anyone gets a hold of a valid php session
    id then they will be able to use it. Possibly using flex server to
    have secure transactions?
    If i host both the flex created swf and the php file on a
    https server will it "talk" securely?
    thanks lots

    You may get a quicker answer from Cartweaver's newsgroups.
    http://www.cartweaver.com/support/
    They're usually quite prompt and helpful.

  • Any implementation with IVR and OPA integrated?

    Hi OPA Gurus!
    Has OPA been used in IVR system for interactive screening? One of my clients is planning its IVR enhancement and they are evaluating the option to leverage the same Rulebase developed for online self service to support IVR screening. The challenge is that any dynamic questions from OPA will have to be pre-recorded in voice and coded in IVR script. This sounds like a high effort approach. Is this technically feasible? Any implementation example or proof of concept?
    Best Regards,
    Bowen Wang

    Hi Bowen,
    This is a challenging requirement. Recording a message for each of the RuleBase questions is not the best option. Instead you can use a Text To Speech (TTS) software which will generate voice messages for each of the questions that is presented to the user.
    This is just a solution I could think of. I have not implemented this, but thought it might be of some help to you.
    Regards,
    Aakarsh

  • Jabber and O365 integration

    Hello,
    Do we need any additional licenses from Cisco or Microsoft to make a full possible integration between O365 and Jabber ?
    For example features like :
    Single Inbox Unified Messaging with SpeechView transcriptions,  Microsoft Word Click to Call, SharePoint Presence & Click to Call,  Jabber video calling and desktop sharing, and WebEx on desktop and iPad,
    Thank you for your help
    Best Regards,
    Tomasz

    Tomek,
    There is no direct integration between Jabber and Office 365, except for Exchange Gateway integration on IMP server side which is not supported with Office 365. All other Jabber integrations do not go to Office 365, calendar client integrations are done with Outlook, and UM integration is between Office 365 and Unity Connection, which does not affect Jabber.
    HTH,
    Chris (Krzysiek) :-)

  • I had duplicated contacts on my old iPhone.  Went with Lion and iCloud, and the duplicates were gone.  New iPhone yesterday and now all my contacts are duplicated again.  How do I resolve?

    When I first signed up with iCloud (and still had Mobile Me), my contacts all double or tripled, or more in my contact list.  When I went with Lion and fully integrated iCloud, that issue resolved itself.  I got a new iPhone yesterday, and when it was up and running, everything was fine.  This morning, I notice that my contacts are all duplicated again.  My personal contact is in my phone 10 times.  How do I resolve this?  My iTunes sync setting does not have me syning my contacts, it should just be in iCloud.  Thanks for any help.

    Hi BCHR,
    If you are having issues transfering your content from your old iPhone onto iCloud so it can be transfered to your new iPhone, you may find the following articles helpful:
    iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device
    http://support.apple.com/kb/HT2109
    iCloud: Troubleshooting iCloud Contacts
    http://support.apple.com/kb/TS3998
    iCloud: Troubleshooting iCloud Calendar
    http://support.apple.com/kb/TS3999
    iCloud: Notes overview
    http://support.apple.com/kb/PH12081
    Regards,
    - Brenden

  • Any kind of integration experience with Weblogic JMS and Oracle AQ?

    Hi,
    In my company I work with java developers who believe in some kind of "holly" database independence I don't understand and as a result my life as a database developer is hell on earth.. Yesterday we again started to discuss, this time where to log, they believe database is slow and prefer logging to filesystem, after some hours finally I could convince them for some operational and reporting needs to use the database and will do this in an asyncronous way whiich they won't get slow. After all I believe the reason for a database is data, this is the place where data lives, and with the correct desing and implementation logging to database would perform better.
    I love Oracle features, and know that we paid a lot for this software, so today I started investigating this promised solution. And quickly I found AQ and JMS topics in the documentation :)
    After this introduction here is my problem; my company use BEA Weblogic as application server and the java guys want AQ to automatically (but of course with some delay) take their JMS log requests into database tables. Does any one have similar application experience, or any kind of integration experience with Weblogic JMS and Oracle AQ?
    Any comments, references, documentation, sample code, url will be most welcomed :)
    Thank you very much!
    Tonguc
    [email protected]
    References I found upto now;
    Oracle® Streams Advanced Queuing Java API Reference 10g Release 2 (10.2) http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14291/toc.htm
    (Packages; javax.jms & oracle.jms)
    Oracle® Streams Advanced Queuing User's Guide and Reference 10g Release 2 (10.2) http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14257/toc.htm
    Part IV
    Using Oracle JMS and Oracle Streams AQPart V describes how to use Oracle JMS and Oracle Streams Advanced Queuing (AQ).
    Chapter 11, "Introducing Oracle JMS"
    Chapter 12, "Oracle JMS Basic Operations"
    Chapter 13, "Oracle JMS Point-to-Point"
    Chapter 14, "Oracle JMS Publish/Subscribe"
    Chapter 15, "Oracle JMS Shared Interfaces"
    Chapter 16, "Oracle JMS Types Examples"
    A Sample Code from Otn
    http://www.oracle.com/technology/sample_code/tech/java/web_services/jmsws/NewsQueueEJB.java.html

    I wouldn't go as far to say Oracle AQ is out-dated today. However, it is indeed a proprietary technology that did not found much main-stream adoption in the earlier years after its introduction. The advent of JMS made it somewhat more useful (or should I say intriguing, because more people are trying to tie it together with other J2EE technologies), but the Oracle's JMS wrapper classes in aqapi.jar were not feature complete for a long while, so using it outside Oracle's application server was painful, if not impossible. I do agree that the info at the dev2dev's JMS newsgroup or in this forum is highly fragmented, as neither Oracle nor BEA provides an official solution to integrate AQ with WebLogic, so people like us have to learn the technology through experimentation and in a piecemeal fashion.
    3 years ago I was literally "playing around" - we had a polling mechanism set up to use triggers to write Oracle data changes into an event table, and had a Java-based daemon to scan that table and publish events as JMS messages to the WebLogic JMS server. This continues to work reliably till today, but I was looking for a solution that has few parts - I wanted to hook up my WebLogic MDB directly to AQ as a foreign JMS provider. Although I was able to get it to work (including XA), there were a few hoops I had to jump through, such as decompiling the Oracle AQjms classes to make them bind to the WebLogic JNDI tree.
    One year after that Diptanshu Parui took what I did a giant step further - he extended the Oracle AQjms classes to allow them to be bound to the WebLogic JNDI tree naturally, and he figured out how to use WebLogic JMS messging bridge to re-send single-threaded AQ JMS messages to clustered JMS queues, which allow concurrent message assumption by multiple instances of MDB's. My impression is that he is using that setup in a production environment.
    I am sure you are aware of it but I would like to make it clear - in order to use AQ as a foreign JMS provider to WebLogic-hosted MDB's, you don't need to update your database to Oracle 10g - Oracle 8i is good enough (although I recommend at least 9i Release 2). It is not the database engine, but rather the aqapi.jar JMS wrapper on top of AQ that matters. I do recommend that you use aqapi.jar from Oracle Application Server 10.0.3 or up for better XA support, among other things. Again, you don't have to replace WebLogic with Oracle AS - you only need a single jar file from it and put it in your WebLogic's classpath. However, I don't know what this means from a licensing point of view if you ever go to production - do you have to pay the full price of OracleAS or OC4J just to use the aqapi.jar?
    In the coming days I will test the latest aqapi.jar to see how much progress Oracle has made in terms of making their J2EE products more spec-compliant :-).
    Hope the above gives you a different perspective.
    Eric

Maybe you are looking for