ABAVN - Cost Center Not populated

Hi,
I am going to post some Asset Retirement entry from ABAVN  Tcode. Once I simulate the entry, its not populating Cost Center. I want to post into the Cost Center also.
Please provide me some help how post the entry with the Cost Center.
Thanks

Hi,
Why don`t you go to the Cost Element master record (KA02) of the cost account which your retirement transaction type is addressing. Check in tab Default Acct Assignment, whether there is another account assginment (internal order for example) defaulted for your cost element. Alternatively, you could put the cost center you want as a default for your cost account here.
KR,
Severina

Similar Messages

  • Cost center not populated in Purchase requisition for a third party order

    Hello,
    We are currently testing the Third party order flow which includes :
    1. Creation of a sales order with item category TAS
    2. A purchasing contract is maintained for a sales order item at the schedule line level.
    (In the purchasing contract, account assignment is already maintained for each contract item, meaning a G/L Account and a cost center).
    3. Automatic creation of the Purchase requisition when the sales order is saved.
    >> The account assignment is not copied from the contract to the Purchase requisition. Do you know why and how I can do that ?
    Thanks
    Best regards
    Benjamin

    Hi Palani,
    if i am not wrong This WBS in location or additional tabs are used for settlement purpose. For PR creation by maintenance Orders can have Order number as account assignment.
    Please reply
    Thanks
    Sunil

  • Cost Center in populating in GR/IR Clearing Account at MIRO Posting

    Hi,
    I am working in 4.7 EE version. We created one Service Order(purchase order) and gave account assignment as Cost Center and Business area. Then we created service entry sheet wrt to service order and accepted the service enry sheet. System automatically created MIGO document in back end. At the time of posting Invoice Verification wrt service entryshee/service order (purchaseorder), system is populating cost center in GR/IR clearing account.
    Give me some idea how the cost center is populating in Balance Sheet GL A/c (GR/IR Clearing A/c).
    Regards
    Sudhakar

    hi
    i think d havnt tried the tcode i had given
    it is to attach the cost element account to the costcenter
    it  is understandable for a  sap consultant that we can`t  assign gl account to the cost center
    i think u have not tried the solution so plz dont make any comment on any ones experiance
    ur required help and i tried to help u
    this is not the way to talk with anyone
    use ur own logic before asking questions and also replying for answers
    sorry for helping u
    kunal

  • Unit Cost is not Populating in Sales Order Line Level for OPM Enabled Org

    Dear All,
    This is to inform you that Unit Cost is not populating in Sales Order Lines. Ideally it should pick from OPM financials, but whenever i am running Cost Update it is throwing error. We need to pull out Unit Cost for Sales Analysis Report. Please suggest on the same ASAP. What are the steps needs be followed to populate the Unit Cost. Please suggest.
    Thanks & Regards,
    Patrick

    Hi
    I think it will pick from PRICE list. Why don't to you try by keeping this item in the mentioned Price list.
    Regards
    Raj

  • Profit center not populated in SO

    Hi CRM experts,
    We have a typical issue when a SO is replicated from CRM (SAP CRM 7) into ECC 6.0, its not populating the proit center into the field in account assignment tab at item level.  When the SO is created within ECC using VA01 with exactly the same data, it populates profit center correctly.  Any ideas / help is appreciated. 
    Thanks in advance,
    Gopal Turaga

    Hi
    You need to check the following:
    1. The cost center settings in T Code ACSET
    2. The splitting characteristics in the menu path:
    IMG>Financial Accounting (New)>General Ledger Accounting(New)>Business Transactions>Document Splitting>Extended Document Splitting
    3. If cost center is a required field in your asset master and if you have assigned a cost center in the asset master
    4. If a profit center has been assigned in the cost center master assigned in your asset master.
    Thanks & Regards
    Sanil K Bhandari

  • Profit Center not populated in Asset Transactions

    Hi
    We are trying to post asset transactions. We are on ECC 6.0 with New GL and document splitting on profit Center. while posting the periodic depreciation, system is not allowing posting of the document, saying that profit center is not populating in the line item. Pls suggest.
    Regards
    Rupal

    Hi
    You need to check the following:
    1. The cost center settings in T Code ACSET
    2. The splitting characteristics in the menu path:
    IMG>Financial Accounting (New)>General Ledger Accounting(New)>Business Transactions>Document Splitting>Extended Document Splitting
    3. If cost center is a required field in your asset master and if you have assigned a cost center in the asset master
    4. If a profit center has been assigned in the cost center master assigned in your asset master.
    Thanks & Regards
    Sanil K Bhandari

  • Cost center not committed on shopping cart,  for account assign cat "Asset"

    Hello,
    We are implementing extended classic scenario in SRM 5.0 with ECC 6.0 backend.
    While creating a shopping cart in SRM, in the cost assignment tab when we select an account assignment category as “Asset", and then try to enter a value in the cost center in the basic details of cost assignment, it is not getting committed to shopping cart screen. The cost center field value is lost when we move to the next screen for ordering the shopping cart. For the asset related purchases, we are using main account assignment category as "asset" and it also requires cost center, because while the asset master record is being created in R/3 for these items,it requires the cost center. We also using internal order. So for the account assignment category "Asset", the other account assignment fields that can be entered are cost center, internal order and one custom field called "project code".
    We have created this user-defined field in the cost assignment tab in the shopping cart, purchase order and confirmation documents in SRM in accordance with the OSS note 672960. We have implemented BBP_CUF_BADI_2 & BBP_DOC_CHANGE_BADI, BBP_DOC_CHECK_BADI for the shopping cart object.
    Can someone please help me with this issue?
    Thanks,
    Krupa

    thanks Ramakrishna and Yann for your prompt reply..
    Ramakrisha,
      I know that for assets, SC requires asset number and G/L is automatically derived from the corresponding asset class from the backend. In our case, we are putting dummy asset number in shopping cart and this asset number exists in R/3. But we are not generating asset creation during shopping cart creation but we are doing it during the PO creation in doc change badi. During this asset generation you also need cost center on the asset record. So we have added cost center field for Asset account assignment category and I can see it in the details of account assignment. But when I enter this cost center on shopping cart, it doesnot get committed, it disappears when I order the shopping cart.
    Does anybody have any clue why this might be happening?
    Thanks,
    Krupa

  • Cost center not picked up in the APC posting for Asset

    Hi,
    The account assignment object KOSTL is active in system, with the below settings.
    and below is the transaction type specific settings.
    in the posting key and the GL accounts Field status groups, the cost center is optional and activity type is also optional.
    In Asset master the cost center is maintained.
    But while doing the Asset Acquisition postin the cost center is not updated in the document.
    It was expected that the cost center will be derived from asset master and would have reflected in the 1st line item.
    Please help me understand, if some other configuration has to be looked at for this perticular issue,
    Regards
    Rudra

    Hi Ganesh / Rudra
    CC in Asset Postings has a purpose
    Since no Profit Center is directly maintainable in Asset Master atleast until EhP4 or 5, the PC in Asset APC line item was derived through the Cost Center or Internal Order maintained in Asset master
    For that reason, your asset APC account must be created as Cost element, even though it is a Balance sheet account.. The cost element category will be automatically 90 - Statistical Cost element
    Check if the APC account is made as Cost element or not.. That would be the reason most probably
    Hope it is clear
    Br. Ajay M
    PS :- I heard that from EHP5 or 6 PC can be directly maintained in Asset Master.. I have not seen it yet, so i cant comment on it

  • Cost center not appearing for G/L (Balance account) while posting

    I have created symbolic account 1300, accrued leave pay with account assign type as F.
    I hvae assigned the relevant G/L to this symbolic account under 'assign balance sheet accounts'
    However while posting, the relevant cost center assignment is not captured next to the G/L account.
    The cost center is correctly maintained in IT0001 and is displayed for the other expense accounts. But is missing for all balance G/L accounts.
    Please guide
    Ally

    Hi Ally,
    I have similar requirement, can you please let me know what did you changed in the Posting Variant.
    Your help is much appreciated, and rewrded. Waiting for your reply.
    Thanks,
    Janga K.

  • G/L Account & the Cost Center not updating in BAPI_PO_CREATE1

    Hi,
    We are using BAPI_PO_CREATE1 for Service PO Creation.
    The System is creating the Purchase Order, but it is not updating the G/L Account & the Cost Center.
    We are passing the following parameters:
                    wa_poaccount-PO_ITEM  = '00010'.
                    wa_poaccount-SERIAL_NO   = '01'.
                    wA_poaccount-quantity   = '100.000'.
                    wa_poaccount-GL_ACCOUNT  = '0058120000'.
                    wa_poaccount-COSTCENTER  = '1000-LSG'.
                    wa_poaccount-itm_number  = '000010'.
                    wa_poaccount-CO_AREA     = '1000'.
                    append wa_poaccount to it_poaccount.
                    clear wa_poaccount.
                    wa_poaccountx-PO_ITEM = '00010'.
                    wa_poaccountx-SERIAL_NO   = '01'.
                    wA_poaccountx-quantity   = 'X'.
                    wa_poaccountx-GL_ACCOUNT = 'X'.
                    wa_poaccountx-COSTCENTER = 'X'.
                    wa_poaccountx-CO_AREA     =  'X'.
                    wa_poaccountx-itm_number  = 'X'.
                    append wa_poaccountx to it_poaccountx.
                    clear wa_poaccountx.
    Please guide how to correct the error.
    Regards,
    PK

    Hi,
    Thanks for the reply.
    We are passing the following parameter in POITEM.
                      clear wa_poitem.
                      wa_POITEM-PO_ITEM = '00010'.
                      wa_POITEM-PLANT = '1003'.
                      wa_POITEM-TAX_CODE = 'S1'.
                      wa_poitem-MATL_GROUP = 'SER04'.
                      wa_POITEM-ACCTASSCAT = 'K'.
                      wa_poitem-ITEM_CAT   = 'D'.
                      wa_poitem-pckg_no    = '0000000001'.
                      wa_POITEM-SHORT_TEXT = 'Freight Service'.
                      append wa_POITEM to it_POITEM.
                      clear wa_poitemX.
                      wa_POITEMX-PO_ITEM = '00010'.
                      wa_POITEMX-PLANT = 'X'.
                      wa_POITEMX-TAX_CODE = 'X'.
                      wa_poitemx-MATL_GROUP = 'X'.
                      wa_poitemx-short_Text = 'X'.
                      wa_POITEMX-ACCTASSCAT = 'X'.
                      wa_poitemx-ITEM_CAT   = 'X'.
                      wa_poitemX-pckg_no    = 'X'.
                      append wa_POITEMX to it_POITEMX.
    Please guide.
    Regards,
    PK

  • Default cost center not appearing for certain users

    Hi Gurus,
    We are on SRM 4.0 classic scenario.
    For certain users when they create SC in SRM the default cost center is not automatically taken into account even if they change it to it. The default cost center was changed for these users and some of them still refer to the old cost center no. which was maintained for them.
    The users are not defective and the except the cost center all other attributes work fine. I have tested by deleting & recreating new BP no. for the users but it still doesnt help. Please advise.
    BR,
    Sambit

    hi
    check if the users are correctly mapped into org structure (ppoma_bbp)
    than check if theri Position are correctly mapped with the default cost center (ppoma_bbp; tab attributes; cost center
    regards
    andrea

  • Cost center not appearing while settling to GL Account using AIAB

    Hi
    There is one AuC 100000019.  There are two values: Rs.10000 and Rs.145500
    Now i want to settle it to GL account using AIAB.
    In AIAB under Category field, i gave GL (i.e. GL account as Category). Then i mentioned GL Account as settlement receiver. Then i double clicked on the settlement rule line and specified cost center (same as assets)
    While settling using TCOde AIBU, it gave error, and asked for CO object. I do not know why its not picking cost center even though i specifically gave the cost center.
    Please let me know what can be done
    Thnx
    Deepak

    Hi Deepak,
    What was the resolution here? I know the implementing Note 744194 does not fix this issue. I am thinking 2 possible scenarios:
    1. If the cost center for AuC settlement to GL is going to be the same each time, then a GL account can be specifically setup for the purpose of this settlement and the Cost Center can be defaulted via OKB9.
    2. If the Cost Center differs, then as you mentioned: It cannot be defaulted.
    I am encountering the same issue, please share anything that you can.
    Thank you,
    Yhuss

  • Cost Center not updated in accounting documents generated in SAP RE-Fx

    Hi Experts,
    I'm facing an issue wherein I don't see the cost centers getting updated in the accounting documents generated from RE postings.
    Pl. note that the appropriate cost center (relevant to the cost center) is maintained in the rental objects.
    What is the customizing settings I'm missing out due to which I don't see the cost center updated in the accounting documenmts?
    Thanks & Regards
    Shantanu

    HI Shantanu,
    As far as I know, in RE-FX we can post the cost to the RE object directly. All the objects in RE-FX (i.e. BE, BU, PR, RO, RECN, SU, etc) are cost objects in themselves. However, to post the cost to Cost centers you will need to run the CO settlement. Again CO settlement rule is available in all these objects.
    Please refer the SAP Library for further explanation:
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/00/80383b1b793821e10000000a114084/frameset.htm
    Regards
    Rohit

  • Cost Center not updating in FI documents

    Hi All,
    I have an issue,
    I am confirming Gem,Maintenance PM order,and consuming spare part, but in FI documents its updates the cost center,PM pm order cost receiver object is cost center in the settlement rule.
    please guide me which settings required for update the cost center in FI documents.
    Regards,
    Santhosh

    Hi,
      The cost center on the Goods issue document is not related to the settlement cost center on the order.Why would you need the settlement cost center on the Goods issue FI document?
    Regards
    Narasimhan

  • KI222 - Inappropriate Cost Center Not Valid Error Message

    Iu2019m having a problem goods issuing material to a cost center (movement type 201) via a call of the BAPI_GOODSMVT_CREATE BAPI (ECC 6.0).  I can post a specific material / plant / storage location / cost center combination without issue via MB1A but when attempting to call the BAPI processing the exact same data, I get the error message KI222: Cost center aaaa/ccccc does not exist on 05/14/2009.  (where aaaa = the appropriate controlling area and ccccc = the cost center).  Iu2019ve checked the validity dates on the cost center via KS03 and all looks fine (the cost center is valid until 12/31/9999).  The cost center is valid on the posting and entry date I'm passing in the BAPI header. 
    Any ideas what I may be doing wrong or if thereu2019s some field Iu2019m not appropriately selecting / flagging in the BAPI.  Iu2019m using the BAPI successfully for several other movement types (701, 702, 551, 552).
    Thanks,
    Randy

    Hello,
    Go to OKKS and set your controlling are correct.
    Then go to KS03
    See the from validity. If there from date is in past then there should not be any issue.
    Make sure that your entry is using current date not old dates in the data using BAPI
    You can switch off the message for the time being.
    Go to OBA5 and application area KI and message number 222.
    Switch off the message for online and batch entries.
    This is only for temporary purpose till you pass on your BAPI. But this is not suggest to do it in production system, as this is deviating from standard functionality.
    If the message is not available in OBA5, first go to OBMSG transaction code add the message there to the application area (tick switch off message check box) and then come to OBA5 to switch off the message.
    Regards,
    Ravi

Maybe you are looking for