ABC analysis for Cycle Counting.

Hi SAP gurus,
I am facing a problem from the user. While doing the ABC analysis for cycle counting using the Transaction MIBC, he is getting an error " table T159c is not maintained for plant XXXX". when i checked it SPRO cycle counting is not done for that particular plant.
My question is : Where do we maintainc CC Physical inv indicator ? I have checked at material level in Gen.Plant/Sloc view, it is not maintained . so may be they have maintained at Plant level. where do we maintain at plant level.?

Hi
1) Maintain the Percentages against A,B,C,D cycle counting indicators in OMCO
2) Perform MICN to schedlue the batch input session for Creation of physical Inventory documents
3) MIBC-For ABC analysis for Cycle counting .
Note : the percentages maintained in OMCO will decide on the classification of the material as to when the Physical inventory needs to be done based on either the consumtion values/Requirement values
Regards
Sandeep

Similar Messages

What does the field Inconsistent mean for ABC Analysis for Cycle Counting report

What does column "Inconsistent" mean for report ABC Analysis for Cycle Counting (T-code MIBC)? The reason I'm asking is because I see TotalStock values greater than 0, but the Accounting 1 view for Material Master and MMBE both show zero stock. I do not understand why TotalStock in the report does not show zero. Can anyone explain how this can happen?
Note: the report is run for consumption/usage date range.
Thank you,
Doug

Hi,
MBEW table and MMBE transaction will show the current stock. When you run MIBC report for consumption, the system considers the consumption for the date range given (from MVER table), which may not be equal to the current stock. Refer the KBA: 1817237 - Stock quantities and stock values in MIBC which explains the system design.
Regards,
AKPT

A question about ABC analysis for Cycle counting

Hello expert,
What is RMCBIN00 used for? Currently, user asked me if we can copy RMCBIN00 and perform ABC analysis by quantity? I have no knowledge about it. Can any expert give some clue?
Thanks in advance,
Best Regards, Johnny

Hi
RMCBIN00 is a standard ABAP report available within your SAP system (depending on your version and release level). Below is the standard documentation available for this report and a few details of other objects it interacts with such as tables, function modules, includes etc. If you would like to see the full code listing simply enter the object name( RMCBIN00 ) into the relevant SAP transaction such as SE38 or SE80
RMCBIN00 - ABC Analysis of Cycle Counting (Physical Inventory)
PURPOSE
This report runs an analysis for the chosen material types in the cycle counting method of physical inventory.
FEATURES
The analysis takes into account the consumption (usage) or the requirements values of the selected materials for the desired time period. You can decide whether you want to analyze:
Only materials that have a cycle counting indicator
All materials; that is, including materials that have no cycle counting indicator.
Regards
Anand

MIBC - ABC Analysis for Cycle Counting -Report : RMCBIN00

Hi All,
We are trying to have our CC inventory indicators updated by using report RMCBIN00. We noticed that if a have a part with a very high value it is most likely to get indicator A even though the demand for that part is not as high as for a part with a very low price but that we sell thousands. Can some explain how can we use this report in such a way that considers demand? Thanks for your help.

A cycle count indicator A or B or C or D is allocated to material in the material master based on either consumption value (consumption X rate) or forecast value (forecast quantity X rate). You can also specify whether this analysis is to consider only the materials with cycle counting indicator or all materials. The cycle counting indicator in the material master records can be updated automatically by this program.

Transaction MIBC-- ABC Analysis for Cycle Counting - Physical Inventory

Dear Friends,
Could you please explain me the cycle count indicator relationship to the percentage of inventory to be counted.
When i am using MIBC transaction and changing the Percentages....based on percentages the system is proposing the new cycle count indicators for the materials.
Thanks in advance
Sanjay

Dear Sanjay,
I would recommend you to write your question into the ERP - Logistics Materials Management (MM) topic. I suppose you will get more information about MIBC there.
Regards,
Ely

Add new batch during count entry (for cycle count by quant LICC)

Hi! We are using LICC for cycle counting by quant as we have mixed storage and do not want to count all the materials in a single bin. Most of the materials involved are batch-managed. One issue we have is we may discover other batches during stock take. In this case, how can we add this to the stock adjustment since we cannot add new item when we use cycle counting by quant?
Appreciate your suggestion in this case.
Cheers!
SF

Hi,
Whenever you find discrappancies, in this case founds, you will note these down and first do an analysis whether this particular batch has been written off in the past as lost. When not, you will make a MB1À or MIGO booking to add this found batch to stock. When yes, you could do a reversal of the issue or do a new receipt.
MdZ

ABC Analysis for Customers

Hi All,
Please let me know the concept of ABC analysis for customer clasification in SAP.
What are all the configuation setting needed for the same?
What is the master data to be maintained?
How to run the ABC analysis for customers? with relevant report(s)?
Relevance of the field "ABC Class" (KNVV-KLABC) in Customer Master(how can it be used for ABC analysis for customers).
Thanks & Regards,
Roushni

Dear Roushni,
As per my concern there is ABC analysis for material but I don't about Customer ABC analysis.
Plaese got through this SAP help link to know about Material related ABC analysis.
http://help.sap.com/saphelp_47x200/helpdata/en/c1/37613d449a11d188fe0000e8322f96/frameset.htm
I hope it will help you,
Regards,
Murali.

I need validation code for cycle count open interface

Hi friends i require the validation code for the
cycle count open interface .
can anybody help me .......
Message was edited by:
user506929

Hi David
I want to know the procedure for cycle count open interface i.e.
1> How the data from flat file is uploaded in oracle INV
How many Tables are needed?
2>What validations are required ?
3>How these validations are performed ?
If you have any document pls send it to me at :
[email protected]
thanks for ur responce ......

How to realize abc analyse for opportunity

hi experts,
i want to build a bex query for abc analyse for opportunities, it should look like this:
opportunity   probability category
test1          75%          A
test2          30%          B
test3          15%          C
i dont know how i could realize that, i have checked the document "how to realize abc analyse" but it doesnt help me.
could somebody help me?
thanks in advance
Quan

Chi,
APD stands for Analysis Process Designer , you can use query results or results from an analysis process for further processing , you could use the data model here too.
check out :
http://help.sap.com/saphelp_nw04/helpdata/en/49/7e960481916448b20134d471d36a6b/frameset.htm
for APD information .. I have assumed though that you are in BW3.5 atleast...
Arun

Automatic generation of physical Inv. docs. for Cycle Counts

I would like to know if physical inventory documents for cycle counts can be created automatically by SAP. i.e. all A class materials will have physical inventory documents generated automatically after every 3 months. Is this possible?
Many thanks.

Technically it is possible to run the creation program scheduled in background.
But not everything what is technically possible makes sense for the business process.
Before you generate inventory documents (it does not matter whether this is anual inventory or Cycle count) you have to make sure that any receipt or goods issue that happened before the count is posted in SAP.
This often can only be achieved by calling the Usual Suspects.
With a good organisation in place this can even be achieved with scheduled jobs, but such good organisations I have not seen often (did I ever?)
Further you might have a kind of misunderstanding. Each cycle count has all due to be counted materials, no matter if the CC indicator is A, B C or D. There is no field in the selection screen to tell SAP to just create inventory documents on A items.
The CC indicator defines how often a material is to be counted, but not when. The when is defined by last inventory, or accounting view creation date. So you should plan to count minimum once in a month, I recommend to do it weekly, but it depends on the number of items you have to count.

What is T-code to cancel physical inventory document for cycle count MICN?

HI
Please advice me what is T-code and step to cancel physical inventory document for cycle count MICN?
Thanks

There is no way to Cancel the Cycle count document. however you can click on 0 count so that it wont post any new entry on the cycle count.

Fields in MCHB table for cycle counting

Hi Experts,
There is a requirement in my program that if the values of the follwoing stocks are there in MCHB table then change the date of creation when cycle counting is performed at the end of the year:
Blocked
In qual. insp.
Restricted-use
Returns
Stock in tfr
Unrestricted
Can anyone tell me that which field are there in MCHB table coressponding stock types.I can see some fields starting with CV* and some with KZ* for BLocked, restricted..etc

Blocked - CSPEM
In qual. insp. - CINSM
Restricted-use - CEINM
Returns - CRETM
Stock in tfr - CUMLM
Unrestricted - CLABS
These are the fields

Function Modules for Cycle Counting in Warehouse Management.

Hi All,
Can anyone provide me with a list of function modules related to Cycle Counting in Warehouse Management? Also, what is the procedure to find these in SE37?
Many thanks in advance.
avi

Hello Avi,
What is the purpose of this functional module / BAPI? for Inv document creation or change or display or inventory count update or clear difference?
Complete BAPI list is available in the first thread of this forum.
Your answer will help us to provide accurate ansdre.
To to SE37 -> Press F4 -> SAP Applications --> LE --> LE-WM here you will find all LE related FM or BAPI.
Hope this helps.
Regards
Arif Mansuri

Using ISEG as datasource for cycle counting BW cube

ISEG captures the cycle count transactions in R3. As far as I know there is no business content cycle counting cube or extractors. I would like to create an extractor against ISEG to bring into BW in order to create a custom BW cycle counting cube. I would like to know any pertinant notes on advice in general on using ISEG as a datasource. I do understand how to create new extractors; I'm looking for any nuances with ISEG. Perhaps data quality, keys, delta processing, new content etc., just for examples.
thanks
Bob Bechtel

Hi Bob,
I have faced the same situation as yours. Could you tell me how you proceeded to get this cycle couting cube in place.
Thank you.
Cheers,
DM

Inbound Idoc function module for Cycle count with msg type WVINVE

Can any one tell me which is the standard function Module which processes Cycle count for message type WVINVE.
My requirement is to setup Inbound Idoc for cycle processing with message type WVINVE.

Hi Mukesh,
Inbound FM is IDOC_INPUT_STORE_INVENTORY , and Process code is WVIN.
Yoou can check this in Tcode WE42 for process code WVIN.
Regards
Srikanth M

ABC analysis for Cycle Counting.

Similar Messages

Maybe you are looking for