ABC Classification and Cycle Cout

Hi,
We need to count a specific category of items every week from our sub inventories.
After reading manual I have done abc classification and created cycle count.
But problem is I don't know/cant find how to perform cycle count on the category that I want to be counted every week.
If anyone who does this or the gurus please help I am stuck with this.
thanks,
7Z

Hi
I was looking for that becuase by using the interface table we can upload adjustments after running cycle count.
Is there a way to upload adjustments from excel after physical count,
thanks,
/Z

Similar Messages

Need to transfer field KLABC (ABC Classification) between CRM and R/3

Hello Group,
We plan to make the R/3 field KLABC (ABC Classification) of a customer (R/3 Table KNVV, Attribute KLABC) available in SAP CRM under Customer's sales area data. It should also be maintainable in SAP CRM.
After some analysis we found out, that this field also exists in SAP CRM (Table SMOKNVV, Attribute KLABC) but it is not replicated between CRM and R/3 (and vice versa). Also this field is not displayed in SAP GUI as well as not in the PCUI.
Now we are analyzing the two options:
1) Make KLABC from table SMOKNVV available in SAP CRM (and PCUI) for maintenance and extend the Middleware to enable the replication of KLABC between CRM and R/3
2) Extend the customers sales area data in CRM (PCUI) by a new attribute ZKLABC and extend the Middleware to enable replication between R/3 KLABC and the newly created ABC attribute in CRM
We have the following questions:
- What would be the better & easier approach ? Any recommendation or comment is highly appreciated.
- If we choose option 2, to what extend would the SAP CRM Easy Enhancement Workbench (EEWB) support this development (Is it possible to extend the business partners sales area data with EEWB ? Does the EEWB also extend BDocs if you add new fields to Business Partner tables ?)
Background Information:
We have SAP CRM 4.0 SP8, R/3 4.7 and SAP Enterprise Portal 6.0
Thanks a lot for help,
Erik

Hello Frédéric,
no, I do not have the middleware enhancement guide. Do you have it electronically and could send it to me erikmueller (at) gmx.de ?
In CRM would make the field KLABC from table SMOKNVV available in PCUI? Or would you use the Easy Enhancement Workbench to introduce a new field?
Either way I the middleware would need to be enhanced, but I would like to understand what is easier in CRM to have the field available in PCUI.
Thanks for the info.
Regards,
Erik

ABC classification

Hi Gurus,
How can I maintain in ABC clasification by mass upload in MRP
and how this be automatically calculated as ABC per item. What I know for the Cycle Count is that I will run a report that could identify ABC by using the percentage setting in MIBC Tcode, in MRP Im not sure where to maintain.
Please advise.
Regards,
Virgilio

you have to give the ABC Classification in general data of MRP-1 view.
A-Significant material
B-Medium significant
C-Lower significant
based on this system will stratify the material.For Mass upload by LSMW.you have to check same material type and same views have been maintained by all the materials.Please check 1st thread of this forum for LSMW of material master.
reward if useful.
regards
venkadesh

ABC classification for material

Hello
Does ECC 6.0 offers any kind of standard ABC classification (allocation of materials to groups A, B, C , D, etc based on consumption , stock , turnover , etc ) for material.
By my opinion, it should be some kind of standard programs that allows to do it.
Thanks

HI,
Check trasacton code MIBC.
Prerequisites
Before running the analysis, you must define the valid cycle counting indicators in the Customizing system of Inventory Management and define the percentage allocation of the materials to the individual cycle counting categories.
You can also directly change the percentage values via the indicator Change CC percentages on the initial screen of the analysis.
To set the cycle counting indicator for a material, you need authorization to change material master records (authorization object Material Master: Plant, activity 02).
Features
The analysis takes into account the consumption (usage) or the requirements values of the selected materials for the desired time period. You can decide whether you want to analyze:
Only materials that have a cycle counting indicator
All materials; that is, including materials that have no cycle counting indicator.
During the analysis, you can have the system automatically update the cycle counting indicator in the material master record for the selected materials
Regards,
Shailesh Mackwan

Cycle Couting for Consignment Stock?

How to perform Cycle Couting for Consignment Stock at the Customer??

hi,
mi01--> on selection screen, apart from plant and storage location, you can enter W- Customer Consignment (special stock) indicator. It will allow you to do the rest of customer consignment count.
Reward if helps!
Regards

What does the field Inconsistent mean for ABC Analysis for Cycle Counting report

What does column "Inconsistent" mean for report ABC Analysis for Cycle Counting (T-code MIBC)? The reason I'm asking is because I see TotalStock values greater than 0, but the Accounting 1 view for Material Master and MMBE both show zero stock. I do not understand why TotalStock in the report does not show zero. Can anyone explain how this can happen?
Note: the report is run for consumption/usage date range.
Thank you,
Doug

Hi,
MBEW table and MMBE transaction will show the current stock. When you run MIBC report for consumption, the system considers the consumption for the date range given (from MVER table), which may not be equal to the current stock. Refer the KBA: 1817237 - Stock quantities and stock values in MIBC which explains the system design.
Regards,
AKPT

ABC analysis and MC40

hi-
Environment : ECC6.0
We use the standard MIBC-ABC analysis which changes the ABCD indicators based on the turnover or u can say consumption.
Scenario:
We have low cost value components (say Bolts) but have a high usage/consumption. So based on ABC indicators, they come up for counting very ofter. We dont want to count them every month due to their low value but would like to make them available in standard SAP ABC analysis.
And NO, we dont want to fix the CC indicators for these bolts.
My question as per following?
(1) How can i achieve a situation that when the ABC analysis runs and provides a report that Bolts are A ( high consumption indicator-monthly), i am able to change the CC indicators subsequently for the Bolts to D ( once a year) so that i dont do the inventory count for them. ( I dont want to use MM17)
(2) Can i run MIBC analysis and then execute MC 40 for bolts (if this T-code will assist me since i dont know much about this T-code)?
(3) Can i just run MC40 or is there another T-code which will assist me?
(4) Is there a process in Standard SAP which will be enble me to achieve my requriement.
Looking for any information you all can share.
Thanks

Thanks for the response.
MICN is the only one that can update the indicator used for cycle counting.
Once MICN updates the Cycle count indicators, can i then go into MC40 or similar T-code, select the range of materials or material types for the BOLTS in the input screen and make a change on the CC indicators manually to D ( annual count)?
However, pretty often the cycle count indicators are precalculated by MICN based on consumption, but then individual items are changed to get a different indicator for specific reasons.
You may have a low value item, which is very important for your processes.
Based on consumption values it may get indicator C, but if you have differences on that item then it is a critical factor for your business, hence you want count it more often, thus you would manually change it to B or even A. (which can be done directly from the MICN report)
My requirement is : I have low value materials in high qty which show in Monthly inventory count due to high consumption. This is my target group to change the CC indicatos to C or D.
When you indicate i can manually change in MICN report, does it mean that i need to run MICN report twice, first to get the actual ABC analysis and then second time, select the materials (BOLT), generate a report and change the CC indicators.
I do see an option to input materials in the input screen of MICN but i dont see the option to input or provide the required CC indicators as a manual input.
If you could provide more information on the sequence of steps, it is appreciated.
Appreciate your support.

A question about ABC analysis for Cycle counting

Hello expert,
What is RMCBIN00 used for? Currently, user asked me if we can copy RMCBIN00 and perform ABC analysis by quantity? I have no knowledge about it. Can any expert give some clue?
Thanks in advance,
Best Regards, Johnny

Hi
RMCBIN00 is a standard ABAP report available within your SAP system (depending on your version and release level). Below is the standard documentation available for this report and a few details of other objects it interacts with such as tables, function modules, includes etc. If you would like to see the full code listing simply enter the object name( RMCBIN00 ) into the relevant SAP transaction such as SE38 or SE80
RMCBIN00 - ABC Analysis of Cycle Counting (Physical Inventory)
PURPOSE
This report runs an analysis for the chosen material types in the cycle counting method of physical inventory.
FEATURES
The analysis takes into account the consumption (usage) or the requirements values of the selected materials for the desired time period. You can decide whether you want to analyze:
Only materials that have a cycle counting indicator
All materials; that is, including materials that have no cycle counting indicator.
Regards
Anand

ABC analysis for Cycle Counting.

Hi SAP gurus,
I am facing a problem from the user. While doing the ABC analysis for cycle counting using the Transaction MIBC, he is getting an error " table T159c is not maintained for plant XXXX". when i checked it SPRO cycle counting is not done for that particular plant.
My question is : Where do we maintainc CC Physical inv indicator ? I have checked at material level in Gen.Plant/Sloc view, it is not maintained . so may be they have maintained at Plant level. where do we maintain at plant level.?

Hi
1) Maintain the Percentages against A,B,C,D cycle counting indicators in OMCO
2) Perform MICN to schedlue the batch input session for Creation of physical Inventory documents
3) MIBC-For ABC analysis for Cycle counting .
Note : the percentages maintained in OMCO will decide on the classification of the material as to when the Physical inventory needs to be done based on either the consumtion values/Requirement values
Regards
Sandeep

ABC analysis and cyclic inventory

What is the relAtion between ABC indicators and CC indicators?Why do we need to run ABC analysis for cyclic inventory?Cant we randomly assign the CC indicators in MM02?

Please see the below note
What is A, B, C and D Indicator for a material for cyclic count?
All the material may not be important for cyclic count purpose, it may be required to count
some items frequently and some items rarely.
A cyclic count indicator A or B or C or D is allocated to material in the material master
based on either consumption value (consumption X rate) or forecast value
(forecast quantity X rate).
The item with more consumption value are classified as A, and with minimum as D.
u201CAu201D indicator items will be counted frequently (say every month), D will be less frequently
(say every 6 months or every one year). Daily a number of items will be taken for count, some
may be with A indicator, some with B and so on.
Mark all materials that are to be included in cycle counting with a cycle counting indicator
in the material master record (storage data). The cycle counting indicator is used to group
the materials together into various cycle counting categories (for example, A, B, C, and D).
There is an option in SAP to have a fixed indicator for a material say A for a material which
does not have a high consumption value but it is important to count it every month, then the
material can be marked as A indicator in material master with indicator u201Cfixedu201D
In Customizing OMCO, for Inventory Management, you can define for each category the time
intervals at which the materials are to be counted.
Fields : No. of phys. inventories per fiscal year for cycle counting
For e.g. A - 12, B - 6, C - 3, D - 1
Specifies how often during the fiscal year a physical inventory is to be carried out for a
material subject to cycle counting.
The system uses this specification to convert the count interval into workdays.
Fields : Physical inventory interval (in workdays) for cycle counting
For e.g. A = 12 times per year and your Total Factory Calendar days = 300
The interval will be calculated as 300 / 12 = 25 days
Specifies after how many workdays following the last inventory count another physical
inventory has to be carried out for a given material.
The count interval is determined automatically on the basis of the number of physical
inventories specified for the fiscal year.
Fields : Float time (in workdays) for cycle counting
For e.g. A - 10, B - 20, C - 30, D - 0
Indicates the number of workdays by which the planned count date may vary from the current
date.
For examples :-
For the plant, the float time is five days.
A physical inventory has been planned for a material belonging to category C for June, 1.
On expiration of the float time (after June, 6), the physical inventory has not yet been
carried out.
Irrespective of the category, the material is parked for the next cycle counting run.
Fields :- Percentage of performance measure for cycle counting ind.
Specifies the percentage allocation of the materials to the individual cycle counting
categories.
The percentage value is used for automatic assignment of the cycle counting indicator.
For example :-
In the given plant, 200 materials are subject to the cycle counting physical inventory
procedure.
In Customizing for Inventory Management, the following percentage allocation has been defined
for the plant:
A materials: 50%
B materials: 25%
C materials: 15%
D materials: 10%
            100%
In the cycle counting analysis, the materials are sorted by consumption. After completion
of the analysis, the cycle counting indicator is assigned as follows:
The first 3 materials (sorted in descending order according to consumption) represent 50% of
the consumption and have the indicator A.
The next 12 materials represent 25% of the consumption and have the indicator B.
The next 49 materials represent 15% of the consumption and have the indicator C.
The remaining 136 materials represent the rest (10%) of the consumption and have the
indicator D.
Marking Materials for Cycle Counting
This step is only required if you perform cycle counting for the first time or if you want
to update the cycle counting indicators.
In the material master record (storage data), maintain the cycle counting indicator for all
the materials that are to be included in cycle counting.
You can set the indicator in one of the following two ways:
1. manually in the material master record. To do this, choose
   Material -> Change from the Material Master menu.
2. automatically using ABC analysis To do this, choose
   Special procedures -> Cycle counting -> Set CC indicator from the Physical Inventory menu.

Vendor classification and sub classification

All,
we have list of vendors with classification and sub classification. They need to print the vendor line item report with these two classification. For example
Vendor abc has classification of non-raw material and sub classification of indirect material. vendors with freight classification and service sub classification. etc
Can someone please help me of how we can do this. I need detailed information.

Define class groups and classes separetely link each class to the rel. group. Assign the class to the vendor.

Running APD for ABC classification

Dear Experts,
I have created a data mining object for calculation of customer clasification. Afterwards an APD object was created, where I use a BEx query to calculate the ABC classification (based on the rules in data mining object). Subsequently the attribute of info object 0CUST_SALES will be updated with ABC calls (name of info object is:0CUST_CLA).
APD object has been created and activated. Now when I try to run it, I get the error message:
"Internal error when reading the definition of InfoObject 1CUDIM"
Message no. RSCRM129
Any idea how to proceed?
Thank you
Aban

Hi,
i had the same issue with my APD. The solution here was remove the field 1CUDIM from the query and map all the keyfigures with their own units to the DSO. That means that when you have 6 keyfigures in the query and in the APD you have to create 6 unit info objects in the DSO .
From the query you get for example the following output:
D5M88END2WPQ8E1CJHFNNRAW7
D5M88END2WPQ8E1CJHFNNRAW7_UNIT
I map is to my own fields in DSO:
ZIC_AMT_1     IM quantity 1
ZIC_AMT_U1   IM unit 1 (unit belonging to the keyfigure)
Hope this helps.
Paul V
TruEconomy NL

How do i turn off cc? settings page shows it is off, but it shows up on abc, usa, and other playbacks. buttons for cc in each app do nothing

How do I turn off cc? I'm not hearing-impaired and did not turn it on. Settings page shows it is not turned on, but when watching ABC, USA etc., its there and the buttons within each app to remove it do nothing.

Yes, the captions themselves. Last evening I pulled up an ABC program from the ABC app (not ABC.com), and captions were on. I went to settings page and again turned on then off the captioning option. When I went back to my program, captions were still on but the cc button actually brought up dialog to turn them off. Some possible difference between iPad interpretation of cc data and that of the app for the broadcaster? Was never able to get rid of it Sunday on a USA replay.

DOCUMENT CLASSIFICATION AND CTXRULE INDEX TYPES IN ORACLE9I TEXT

제품 : ORACLE SERVER
작성날짜 : 2004-05-27
DOCUMENT CLASSIFICATION AND CTXRULE INDEX TYPES IN ORACLE9I TEXT
================================================================
PURPOSE
이 문서는 Oracle9i 에서 추가된 새로운 기능으로 Oracle Text 에서의
문서 분류기능(Document Classification) 에 대해 소개한다.
Explanation
Oracle9i Text 에서는 CTXRULE index type을 이용하여 각 문서를 분류하는 기능을
구현할 수 있다. 이 CTXRULE index type은 각 분류별로 define 된 rule에 따라
문서를 indexing하고, 이러한 기능을 위해 MATCHES operator를 제공한다.
이 Oracle9i Text 는 일반 Text, XML, HTML 문서에 대해 이 document classification
기능을 지원한다.
1. Create a Table of Queries
먼저 다음과 같이 조회를 위해 분류할 category를 저장할 table을 생성한다.
CREATE TABLE myqueries (
     queryid NUMBER PRIMARY KEY,
     category VARCHAR2(30),
     query VARCHAR2(2000) );
아래와 같이 조회시에 문서의 category name과 query시 사용할 구문을 저장한다.
INSERT INTO myqueries VALUES(1, 'US Politics', 'democrat or republican');
INSERT INTO myqueries VALUES(2, 'Music', 'ABOUT(music)');
INSERT INTO myqueries VALUES(3, 'Soccer', 'ABOUT(soccer)');
2. Create the CTXRULE Index
CTXRULE index를 이용하여 이 table에 Text index를 생성한다.
CREATE INDEX myqueries_idx ON myqueries(query)
INDEXTYPE IS CTXRULE
PARAMETERS('lexer lexer_pref
storage storage_pref');
이 CTXRULE에는 filter, memory, datastore, stoplist 는 지정할 수 없다.
3. Classifying a Document
아래와 같이 실제 데이타가 저장되는 table을 생성한다.
CREATE TABLE news (
     newsid NUMBER,
     author VARCHAR2(30),
     source VARCHAR2(30),
     article CLOB);
이 Table에 data를 insert하기 전에 MATCHES operator 를 이용하여 지정한 내용에
대해 문서를 분류하여 query table에 저장하는 trigger 를 생성한다.
You can create a before insert trigger with MATCHES to route each document to
another table news_route based on its classification:
CREATE TRIGGER NEWS_MATCH_TRG
BEFORE INSERT ON NEWS
FOR EACH ROW
BEGIN
-- find matching queries
FOR c1 IN (select category
from myqueries
where MATCHES(query, :new.article)>0)
LOOP
INSERT INTO news_route(newsid, category)
VALUES (:new.newsid, c1.category);
END LOOP;
END;
RELATED DOCUMENTS
Oracle9i Text Application Developer's Guide Release

Hi,
please post a Oracle Text question in the Oracle Text forum: Text
That forum is monitored by Oracle Text Experts. This forum not always.
Herald ten Dam
Superconsult.nl

Link between ABC Indicator and Priority

Hi friends,
My client requires the Link between ABC Indicator and Priority. i.e., While creation of notification, based on the ABC indicator assigned in the Equipment, Priority should be selected.
Is it possible, if possible please help me out to resolve this issue.
With Best Regards,
Dev

Hello,
Yes you can acheive this by Development use the Below User Exit or Fubctional Module to get it done
User Exit-->QQMA0014 QM/PM/SM: Checks before saving a notification
BADI-->NOTIF_EVENT_SAVE Change When Saving Notification
When Notification create against the Equipment which Having ABC Indicator it will stop Notification while Saving the Notification By checking The ABC Indicator on Equipment and Proposes Priority which You already defined in Configuration with Proposed New Dates for Notification Completion Dates.Notification save allowed once you fill Exact value of Priority.
Regards,
Rakesh

ABC Classification and Cycle Cout

Similar Messages

Maybe you are looking for