ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCE

Hello,
A BI Report contains a field "X" & a field "Y".
Y is a sub part of X. Means on clicking upon X, Y opens.
This report runs on date basis. For each date Y contains Zero value, but in the result Y contains some value greater than zero.
Now when i execute this report in Portal, clicking on X for the dates opens up Y.
But in the result column, Clicking on X giveg the following error:
Root Cause
The initial exception that caused the request to fail was:
Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
Pl. note that this report is running fine in BEx analyer & not giving any such error.
Thanks & Regards

In SE 38 run RSPOR_SETUP and see if all the 12 steps are ok, as I see this is a an issue with java server not able to commute with BI., you need to exchange java certificates to BI and vise versa.,(basis can do this step)
Hope this helps.,

Similar Messages

Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION in Report

Hi All,
This is the frequent problem we are facing in BW production.
While executing the BW reports
We are getting the below error.
No Space left in Shared memory.
Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION in Report.
An exception with the type CX_SY_EXPORT_NO_SHARED_MEMORY occurred, but was neither handled locally, nor declared in a RAISING
Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
System error in program SAPLRRK0 and form INITIALIZE_DATA_ACCESS-01
The problem solved when we restarted the server.
but this is coming very frequent.
Is there any permanent soln for this one.
Pls advice.
Thanks!
Sanjay

Hi,
Check the below notes,
Note 656060 - OLAP: Cache main memory displacement not functioning
Note 1114164 - Termination in the cache due to insufficient shared memory
Apply note 1114164 and check if issue resolves or not.
Regards,
Niraj

Program error in class sapmssy1 method : uncaught_exception

Hi Friends,
I am executing Balance sheet report in portal while displaying the out put I am getting the below error message
u201CError Brain (068): Characteristic value 18 of characteristic 0GL_ACCOUNT is not ALPHA-converted
Program error in class sapmssy1 method : uncaught_exception u201C
Can you please provide the solution on this?
Thanks
srini R

this sounds like an R/3 data quality issue...if the alpha conversion routine is not put in the infoobject maintenance you need to put the alpha conversion hardcoded in the start routine. then reload everything...
M.

Program error in class SAPMSSY1 Method When Filtering on Source System ID

Whenever I try to filter my Source System ID in the BEx Query Designer (BI 7.0), I get the error:
Reading Characteristic Values
Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION.
And I cannot filter my Source System ID.
Does anybody know how to resolve this?

Hi,
Check the below notes,
Note 656060 - OLAP: Cache main memory displacement not functioning
Note 1114164 - Termination in the cache due to insufficient shared memory
Apply note 1114164 and check if issue resolves or not.
Regards,
Niraj

Program error in class SAPMSSY1 method

We are on 2004s SP10. I can create queries fine, but can not save them. I created a bex default transport. When I check the query it says it is fine. The error I am getting is "Error in Class SAPMSSY1 Method". I also get an error referencing a 26 or so bit program saying it does not exist. I have not found any threads which from out SP level that match these errors. Any idea? Thanks Steve

This is an issue with Fiscal Year Variant Variable in the query. (Or at least that was our team's issue). To solve this, you have to rebuild the qurey from scratch. Attempting to edit the existing query will NOT fix the issue. Trying to fix it, creates a loop were it again looks for fiscal year variant variable then produces the error.
I solved this be rebuilding the query and adding 0FISCVAR last. Then in the filter, I chose K4 instead of a variable or SAP exit. (sorry if you requirement needs a variable, i would suggest creating a new one of those too). Then save and you should have a working query.
Yes when you check it appears fine, but in the background it is not. When you save the "correct" query, the system looks for the old 0FISCVAR variable and fails to save.

ABEND RSBOLAP (000): error in class SAPMSSY1 method - after report move Pro

Hi Guys,
We recently moved a report to production and got the following error (500 Internal Error) when executing from Query designer
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
I saw in one of the threads to run the Program RSPOR_SETUP and see if all the 12 steps are ok and they are not but they are not ok in Dev and Qua as well where its running fine. Appreciate if somebody can advise.

Hi,
Check your Query in RSRT properties tab and make necessary settings.
Do OLAP check in RSCRM_BAPI t-code. It will show the inconsistencies in your query.......
Regards,
Suman

Program error in class SAPMSSY1

Hello Gurus,
I am facing this error while executing the query in Bex Analyzer. I have attached the screenshot of the error message. My BW system version is BW 702, level 12. Can anybody suggest any solution for this or appropriate notes for this ?
Thanks a lot
Renju

Hello Yasemin,
Diagnosis
This internal error is a targeted termination since the program has an
incorrect status.
Procedure
Analyse the situation and inform SAP.
Thanks
RJ

Automatic payment program - error No permitted payment method exists

Hi All,
I am doing the automatic payment run and done all the necessary config in FBZP.
1) Created the payment program at country level and assigned payment program
2) Created the payment method at company code level for check and assign the Check Form
3) Coming to Bank determination:
   a) Ranking order : given the payment method(A -> Check) ,currency(MYR), ranking order (1) and assigned to house bank (CIMB)
   b) Bank accounts : given house bank , payment method ,currency, account ID and clearing account number.
4) assigned the payment method (A) in vendor master.
when i run the payment run for the vendor in F110 for company code system hitting below errors:
> -
Payment method selection additional log----
> Payment method selection for items due now to the amount of MYR      112,909.38-
> Payment via payee/payer 0550000008
> Payment method "A" is being checked
> Payment with 28 print items, only 16 are allowed
> No permitted payment method exists
Information re. vendor 500000598 / paying company code 0546 ...
......payment not possible because of reported error
End of log
Job finished
please can any body help me on this. I done the same config in DEV and QAS. there working fine with out any issue.   but coming to PRD its giving problem. i double confirm the config in DEV to pRD every thing fine and same.
thanks.
Sandhya.

Hi...
I did check the 1) vendor address -> No gaps
2) My one is check printing not bank transfer
3) I did check all the vendor line items no payment blocks. user already unblock the relevent item to make payment.
Here weird thing is system hitting the same above mentioned error even I updated the payment method(C) and house bank (CIMB) in each and every line item of vendor invoice.
Thanks,
Sandhya.

Error accessing class from method

I am trying to write a method that accesses a class called circle where the user inputs the radius of a circle and the program prints the area, radius and circumference.
My class is as follows.
public class Circle
private double Radius;
private double PI = 3.14159;
public void setRadius(double rad)
Radius = rad;
public void setPI(double pi)
PI = pi;
public double getRadius()
return Radius;
public double getPI()
return PI;
public double getArea()
return PI * Radius * Radius;
public double getDiameter()
return Radius * Radius;
public double getCircumferance()
return 2 * PI * Radius;
I am not having any areas when compiling the class.
The method is as follows.
//IS 115
//DED01
//Method for Circle class
//Larry Piatt
public class CircleStats
public static void main(String[] args)
double number;
Scanner keyboard = new Scanner(System.in);
Circle Radius = new Circle();
Circle Area = new Circle();
Circle Diameter = new Circle();
Circle Circumference = new Circle();
System.out.println("What is the radius of the circle? ");
number = keyboard.nextDouble();
number.setRadius(number);
System.out.println("The area of the circle is "
+ Area);
System.out.println("The diamter of the circle is "
+ Diameter);
System.out.println("The circumference of the circle is "
+ Circumference);
The error that I am seeing are as follows
^
CircleStats.java:28: double cannot be dereferenced
number.setRadius(number);
^
1 errors
This is my first attempt at writting a method that calls a class. I am not understanding it very well yet. Any assistance would be greatly appreciated.
Edited by: tooned on Mar 30, 2008 1:10 PM

1) your error: You're trying to call a method, setRadius, on the variable, number, which is nothing more than a lowly double primative variable. Better to call the method on your Circle object which here you call "Radius" (please note the Java naming convention: objects should begin with a lower-case letter).
Also, when posting your code, please use code tags so that your code will retain its formatting and be readable. To do this, either use the "code" button at the top of the forum Message editor or place the tag [code] at the top of your block of code and the tag [/code] at the bottom, like so:
[code]
// your code block goes here.
// note the differences between the tag at the top vs the bottom.
[/code]or
{code}
// your code block goes here.
// note here that the tags are the same.
{code}Your formatted code would look something like so:
public class Circle
    private double Radius;
    private double PI = 3.14159;
    public void setRadius(double rad)
        Radius = rad;
    public void setPI(double pi)
        PI = pi;
    public double getRadius()
        return Radius;
    public double getPI()
        return PI;
    public double getArea()
        return PI * Radius * Radius;
    public double getDiameter()
        return Radius * Radius;
    public double getCircumferance()
        return 2 * PI * Radius;
import java.util.Scanner;
class CircleStats
    public static void main(String[] args)
        double number;
        Scanner keyboard = new Scanner(System.in);
        Circle Radius = new Circle();
        Circle Area = new Circle();
        Circle Diameter = new Circle();
        Circle Circumference = new Circle();
        System.out.println("What is the radius of the circle? ");
        number = keyboard.nextDouble();
        // number.setRadius(number);
        Radius.setRadius(number);
        System.out.println("The area of the circle is " + Area);
        System.out.println("The diamter of the circle is " + Diameter);
        System.out.println("The circumference of the circle is "
                + Circumference);
}

Error while executing query on portal-SAPMSSY1 method : UNCAUGHT_EXCEPTION

Hello all,
I have created a quey and executed it on portal and everything just works fine. The query has few input varaibles at the start like fiscal year and some other inputs. I saved the query in my Portal favorites and then when I try to excute it from there it gives me a runtime BI error.
Termination message sent ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION MSGV1: SAPMSSY1 MSGV3: UNCAUGHT_EXCEPTION
I guess it errors out because of the variable input part at the start of query.
We already have note "950992" in the system so wonder what next now.
Any inputs appreciated.
Thanks,
Kiran

We are having the same issue too - we are SP13. Our query is built on a Infoset, and the problem comes with 0FISCPER variable, when we try to do a input help (F4) in Bex. this happens only when I use fiscper on queries bulit on INFOSETS, and it works perfectly alright with all other cubes.
<i>System error in program CL_RSMD_RS_SPECIAL and form
IF_RSMD_RS~READ_META_DATA-02 (see long text)
    Message no. BRAIN299
Diagnosis
    This internal error is an intended termination resulting from a program
    state that is not permitted.
Procedure
    Analyze the situation and inform SAP.
    If the termination occurred when you executed a query or Web template,
    or during interaction in the planning modeler, and if you can reproduce
    this termination, record a trace (transaction RSTT).</i>
    For more information about recording a trace, see the documentation for
    the trace tool environment as well as SAP Note 899572.
and in portal, it gets to the point of variable screen and then throws a error msg.
<i>ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION</i>
Message was edited by:
        voodi
Message was edited by:
        voodi

RSBOLAP 000 and RS_EXCEPTION 105 ERROR in BW

Hello SAP Guru,
I am using BI 7.X(Based on 7.10)
Support Package 9, Patch 1
Revision 1507
When I am using the filter in Bex for DATE,DIVISION and DISTRIBUTION CHANNEL, I am getting the following error.
RSBOLAP 000 Program error in class SAPMSSY1 Method : Uncaught_Exceptiomn
RS_EXCEPTION 105 Error in BW.
Where as for others filter I am not getting any error.
Please any one let ´me know what is the reason
Thanks in advance.
With regards,
Anand Kumar

Hi
Please implement the notes below in your system. These notes should help you.
1398358 Error:CL_RSDM_READ_MASTER_DATA and form __FILL_ATTR_INFO-06-
1452121 Error:CL_RSDM_READ_MASTER_DATA and form __FILL_ATTR_INFO-06-
Best Regards,
Rafael

Error in cl_bp_combo_job --- cl_tc_multifan_net_task method add_task

I try to creata a Job with objects.
I use class cl_bp_combo_job and cl_bp_abap_job
data: cljob type ref to cl_bp_combo_job.
data: clsinglestep type ref to cl_bp_abap_job.
create object: cljob type cl_bp_combo_job.
cljob->set_name( i_name = 'Job1' ).
clsinglestep = cl_bp_job_factory=>make_abap_job( ).
clsinglestep->set_report( i_report = 'ZTEST' ).
cljob->add_task( new_task = clsinglestep ).
Is generated an exception for Add_task.
I found an error in class cl_tc_multifan_net_task method add_task.
Row 40 / 44
insert tasknet_wa into tasknet.
the right code i suppose is
insert tasknet_wa into table tasknet.
Do you know others class or methods to create a Job?
Thanks

Hi
i think it's poosible to create a job multi step:
-Method IF_BP_JOB_ENGINE~GENERATE_JOB_COUNT
- Method SET_REPORT
- Method IF_BP_JOB_ENGINE~PLAN_JOB_STEP
- Method SET_REPORT
- Method IF_BP_JOB_ENGINE~PLAN_JOB_STEP
- Method SET_REPORT
- Method IF_BP_JOB_ENGINE~PLAN_JOB_STEP
- Method IF_BP_JOB_ENGINE~RELEASE_JOB
Max

Getting error while creating abstract method

hi folks,
i facing issue for ABSTRACT Class.
I am trying to create abstarct method, (refered example from saptechnical site),
I created one attribute i-num, created one method AREA, in implementation area , i made it as Abstract, then i did syntax check, then it is giving below error.
*Class ZTEST_CLASS01_AB,Method AREA
The abstract method "AREA" can only be implemented after its
redefinition (METHODS AREA REDEFINITION).*
i tried all the ways..
created subclass for this, i writted some code in AREA of Sub-class, there it is giving dump, because first one is not activated properly..
could you please somebody help me on this.
Sri

Hello Arshad,
Create a class(ZABSTRACT) and make its type as Abstract( Which means atleast one of its methods is abstract)
We can have abstract classes with all it's methods as non-abstract or concrete. A small example is given below:
CLASS gcl_abstract DEFINITION ABSTRACT.
PUBLIC SECTION.
    METHODS concrete. "Concrete
ENDCLASS.                    "gcl_abstract DEFINITION
*       CLASS gcl_abstract IMPLEMENTATION
CLASS gcl_abstract IMPLEMENTATION.
METHOD concrete.
    WRITE: / `I'm a concrete method`.
ENDMETHOD.                    "concrete
ENDCLASS.                    "gcl_abstract IMPLEMENTATION
*       CLASS gcl_abstract_sub DEFINITION
CLASS gcl_abstract_sub DEFINITION INHERITING FROM gcl_abstract.
PUBLIC SECTION.
    METHODS concrete REDEFINITION.
ENDCLASS.                    "gcl_abstract_sub DEFINITION
*       CLASS gcl_abstract_sub IMPLEMENTATION
CLASS gcl_abstract_sub IMPLEMENTATION.
METHOD concrete.
    super->concrete( ).
    WRITE: / 'Abstract class might not have abstract methods at all!'.
ENDMETHOD.                    "concrete
ENDCLASS.                    "gcl_abstract_sub IMPLEMENTATION
START-OF-SELECTION.
DATA: go_abstract TYPE REF TO gcl_abstract_sub.
CREATE OBJECT go_abstract.
go_abstract->concrete( ).
Although i will agree there is no point in making a class as abstract & having no abstract method
@Sri: Looks like you're trying to implement the abstract method "AREA" in the abstract class hence the error. For abstract method you cannot define their implementation in the corres. abstract class.
BR,
Suhas
Edited by: Suhas Saha on Mar 30, 2011 12:04 PM

Error : ABEND RS_EXCEPTION (000): Invalid column name 'TXTMD'

Dear Team,
Am getting this Dump / Error Msg. when tring to execute the query in BI Java Stack, the same query is executing perfectly in BI ABAP Stack, could some one throw some light to how to fix this, we are in process of Upgradating from BI 3.5 to BI 7.0 EHP1,
all production report of earlier version is being upgraded to BI. 7, currently our Java Stack is on SP 6.
The details of the error Msg:
The initial exception that caused the request to fail was:
Termination message sent
ABEND RS_EXCEPTION (000): [Microsoft][SQL Server Native Client 10.0][SQL Server]Invalid column name 'TXTMD'.
MSGV1: [Microsoft][SQL Server Native Client 10.0][SQL
MSGV2: Server]Invalid column name 'TXTMD'.
pl. revert. Your early responses are highly appreciated..!
Thanks in Advance.

Nasiroddin,
according following post:
Re: 500 Internal Server Error
might be that some of variables linked to characteristics that is contained in free characteristics area is corrupted. Try to remove it.
BR
m./

ABAP Programming Error

Category               ABAP Programming Error
Runtime Errors         MESSAGE_TYPE_X
ABAP Program           CL_RSBM_LOG_DTP_DP============CP
Application Component BW-WHM-DST
Date and Time          28.04.2014 15:08:07
Short text
     The current application triggered a termination with a short dump.
What happened?
     The current application program detected a situation which really
     should not occur. Therefore, a termination with a short dump was
     triggered on purpose by the key word MESSAGE (type X).

Error analysis
    Short text of error message:
    *** Data request to the OLTP ***
    Long text of error message:
    Technical information about the message:
    Message class....... "RSM"
    Number.............. 000
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
please use the following search criteria:
      "MESSAGE_TYPE_X" " "
      "CL_RSBM_LOG_DTP_DP============CP" bzw.
   "CL_RSBM_LOG_DTP_DP============CM001"
      "ADD_MSG"
If you cannot solve the problem yourself, please send the
following documents to SAP:
Information on where terminated
    Termination occurred in the ABAP program "CL_RSBM_LOG_DTP_DP============CP" -
     in "ADD_MSG".
    The main program was "RSBATCH_EXECUTE_PROZESS ".
    In the source code you have the termination point in line 111
    of the (Include) program "CL_RSBM_LOG_DTP_DP============CM001".
    The program "CL_RSBM_LOG_DTP_DP============CP" was started as a background job.
    Job Name....... "BIDTPR_1276822_1"
    Job Initiator.. "BWREMOTE"
    Job Number..... 15080600
Source Code Extract
Line SourceCde
   81
   82   l_posit = l_posit + 1.
   83
   84   l_s_mess-requid    = p_requid.
   85   l_s_mess-datapakid = p_datapakid.
   86   l_s_mess-step      = l_step.
   87   l_s_mess-substep   = l_substep.
   88   l_s_mess-runid     = p_runid.
   89   l_s_mess-posit     = l_posit.
   90   MOVE-CORRESPONDING i_s_msg TO l_s_mess.
   91   if not ( l_s_mess-msgty = 'I' or
   92            l_s_mess-msgty = 'S' or
   93            l_s_mess-msgty = 'W' or
   94            l_s_mess-msgty = 'A' or
   95            l_s_mess-msgty = 'E' or
   96            l_s_mess-msgty = 'X' ).
   97     l_s_mess-msgty = 'I'.
   98   endif.
   99   CALL FUNCTION 'RSSM_GET_TIME'
100     IMPORTING
101       e_timestampl = l_s_mess-timestamp.
102   APPEND l_s_mess TO p_t_mess.
103
104   READ TABLE p_t_header INTO l_s_header WITH KEY
105        requid    = p_requid
106        datapakid = p_datapakid
107        step      = l_step
108        substep   = l_substep
109        runid     = p_runid.
110   IF sy-subrc <> 0.
>>>>>     MESSAGE x000(rsm).
112   ENDIF.
113   IF l_s_header-max_state IS INITIAL OR
114      l_s_header-max_state < cl_rsbm_log_dtp_req=>convert_msgty_to_state( l_s_mess-msgty ).
115     l_s_upd-requid     = p_requid.
116     l_s_upd-datapakid = p_datapakid.
117     l_s_upd-step       = l_step.
118     l_s_upd-substep    = l_substep.
119     l_s_upd-runid      = p_runid.
120     l_s_upd-max_state = cl_rsbm_log_dtp_req=>convert_msgty_to_state( l_s_mess-msgty ).
121     APPEND l_s_upd TO l_t_upd.
122     l_header_changed = 'X'.
123   ENDIF.
124   IF l_header_changed = 'X'.
125     IF l_s_header-substep <> '0' AND
126        l_s_header-step    <> '0'.
127       READ TABLE p_t_header INTO l_s_header WITH KEY
128            requid    = p_requid
129            datapakid = p_datapakid
130            step      = l_step

ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCE

Similar Messages

Maybe you are looking for