Ability to Add new language in MII 12.0

Hi Experts,
MII supports localization for following languages
English
German,
Spanish,
French
Japanese
Portuguese
Russian
Chinese
Can we provide localization for any other language excluding languages listed above?
If yes then how this can be achieved?
Thanks in advance.
Regards,
Shalaka

Shalaka,
have a look a the following thread: [New languages in MII|http://forums.sdn.sap.com/click.jspa?searchID=49540995&messageID=8493729].
Hope this helps.
Michael

Similar Messages

Add new language keys

Guys,
I need to add a new language key in CRM 5.0. In Transaction BP when we select languages, how do we add new languages to the list?
Ani

Individual languages cannot be added by a phone owner/user.
A specific/select set/combination of languages is put on devices intended for specific regions/countries.
This means that all possible combinations of languages that individual people might wish to see do not exist (such software packages, firmware, has not been created by Nokia).
And the only proper way of getting whatever languages are available, is to buy a device intended for the region/country where those languages are available.

Is it possible to add new language in General Setting?

Hi all,
I would like to add new language ("Cambodia[Khmer]") in General Setting in SAP and when i select that language, the system auto translate to khmer.
Is it possible to do that? if yes, can u tell me how to do?
Thanks
TONY

Hi Soeun,
You need to have S-User Id and password to open the link, Edy suggested. Still, I am sharing the Note with you:
Symptom
SAP Business One is currently available in 27 languages. While SAP may continue to increase the number of supported languages over time, it is not feasible to satisfy all possible demands.
Solution
The SAP Business One strategy is to empower its partners to take responsibility for the translation of the user interface (UI) into other languages, as needed.
To support this process we have added a new tool to the Installation and Upgrade package.
The Custom Language Tool (CLT) file 'CLT.zip' is located in the folder 'Packages' in the Installation or Upgrade packages.
It enables partners to:
Define an additional UI language
Generate a UI string source file to be translated into the new target language
Upload the UI string target file in the new language to SAP Business One
Make the new language available to SAP Business One users
For more information, see the 'User Guide - Custom Language Tool.pdf' contained in the package.
Thanks & Regards
Ankit Chauhan

How to adde New Language field value in CRM Business Partner Language Field

Dear all,
How can we add a new field value to the Business Partner Language field in CRM and ECC systems.
Your suggestions will be highly appreciated
Thanks
Sravanthi

Hi Shravanthi,
You would need to add the new language to table T002. Once this is done, it will appear in the drop down menus.
Regards,
Rishu.

Can i add new language into my L1520?

Question is simple, can i add a new language into my L1520 ? I bought it in Russia, and in options menu i just found several languages like spanish,english,french,Azerbaizhanish,even if chanise. But i need Turkish language. Can i download it somehow?
Your help appraciated. Thanks in advance
Currently using giant, amazing black Lumia 1520
Solved!
Go to Solution.

If it's not listed in language+region settings, then you cannot download it, maybe that's why Nokia did not release it in Turkey yet
BTW, you would get the same answers from same person in your own language if you've visited local boards
The silence will fall

Add new Language

Hi,
I want to add a new language to SAP BO.
And i want to perform the same operations that we can perform on other languges: change, ...
I think that i have to create a new language.LRF file under \Gui\
and try to make the system Read from it.
does anybody know how?
Thanks.

Hi Achref,
As far as I know, B1 does not support this kind of functionality.
Regards,
Jay.

Add new language to Available Languages in Delegated Administrator

Hi Sun!
We've done a custom language to Convergence, but how can add this new language to the delegated administrator "Available Languages" option?
Regards,
bzg

beck_zoltan wrote:
We've done a custom language to Convergence, but how can add this new language to the delegated administrator "Available Languages" option?The following customization sets the available languages in the New User wizard to be "English" and "Magyar":
a) Make the following change to /var/opt/sun/comms/da/da/jsp/users/newUser.xml:
[root@server da]# diff newUser.xml newUser.xml.orig
136,138c136,139
<                 <option label="English" value="en" />
<                 <option label="Magyar" value="hu" />
<             </cc>
 </cc>b) Add the following line to the bottom of /var/opt/sun/comms/da/da/WEB-INF/classes/com/sun/comm/da/resources/Resources.properties
locale.hu=Magyarc) Redeploy Delegated Administrator (assumes you have deployed to Application Server 9.1/Glassfish 2.1)
cd /opt/sun/comms/da/sbin
./config-appsvr8x-da deployRegards,
Shane.

Help! how do I add new languages

Hi...Does anyone know how to add a new language in OS that I didn't install when i installed my OS X? and when I change my language into Japanese, it shows the language on the bar at the top but not in finder...does that mean that i didn't install the language properly? how do i fix it? my gf is learning japanese now, so i would like to create a account for her in my computer under japanese... this bothers me a lot...
thanks for the help tho..

Hi...Does anyone know how to add a new language in OS
that I didn't install when i installed my OS X? and
when I change my language into Japanese, it shows the
language on the bar at the top but not in
finder...does that mean that i didn't install the
language properly? how do i fix it?
Did you follow the normal language changing procedure of moving Japanese to the top of the list in system prefs/international/languages and then logging out and logging in again?
To reinstall Japanese, try running the Language Translations installer found in the OptionalInstalls.mpkg of the Tiger DVD.

Add new language... pb with PortalConfigAssistant

Hi,
I'd like to add a new language in portal R2. (french language)
to do that, i've execute the line below :
ptlasst.csh -mode LANGUAGE -i typical -lang f -m portal -available -silent -verbose
but it doesn't work and in the log file, there an error message (just one line) :
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/webdb/config/PortalConfigAssistant
whereas in the ptlasst.csh, the classpath include the file "opca.jar" which contains the PortalConfigAssistant.class...
can anyone help me ?
thank you very much
Franck

This is strange. Are you running the ptlasst.csh from the $Oracle_Home/assistants/opca dir ? If yes, try setting the classpath with the absolute paths in the ptlasst.csh. And are you running this in csh or tcsh environment as recommended.

In Windows 7, I have two alternative languages available. however, Firefox does not recognize the alternat keyboards when I choose them. Does Firefox have the ability to add other language keyboards to be available when selected?

Windows 7 and previous versions gives the ability to add additional keyas validboard selections to be available when selected. The command logo is located on the bottom right of the bottom command bar. I have tried several times to type emails in my Yahoo Mail program while in Firefox, and though the selection shows on the bottom bar, the keyboard is still in English. I do not wish to change the operating language. I just want to have the availability when needed.

Easiest to switch the keyboard layout is to assign a specific shortcut key to each layout (e.g. Shift+Ctrl+9)
* http://windows.microsoft.com/en-US/windows7/The-Language-bar-overview The Language bar (overview)
*http://support.microsoft.com/kb/258824 - How to change your keyboard layout

I've lost the ability to add new sites, change display size, etc. of sites shown when I open a new tab. What am I doing wrong?

At some point my ability to add sites from the new tab page, change site displayed sizes, etc. has stopped working. I liked this feature. What changed or what am I doing wrong?

Do you still see the about:newtab page with the 3x3 tiles?
Did you modify the number of rows and columns on this page?
*https://support.mozilla.org/kb/new-tab-page-show-hide-and-customize-top-sites
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

6650 fold: how to add new languages

Hello,
I have moved from a Nokia 3110 Classic to a 6650 fold which should be an upgrade and include all functions of the smaller model. With the 3110 Classic I could select Spanish as input language which helps quite a bit in writing messages (T9 adds accents, etc.). But the 6650 fold does not offer Spanish. I live in Germany and thus have the T-Mobile branding. How can I add more languages to the phone? I have plenty of space on my MicroSDHC card.

Thanks for the tip. I bought a higher end mobile with a Symbian 60 operating system to be ready for business and world wide use. Unfortunately, the 6650 fold is not suitable for this task. I expected that even more languages than on the 3110 classic are preinstalled on the 6650 fold, but this is not so. I believed that an advantage of Symbian 60 is to be able to install packages on the mobile like it is possible on the PC by downloading it onto the mobile. I do not bring my PC to my dealer just to change the language of the user interface or the input language. The mobile has a firmware and much space for storage of languages. I added an 8 GB microSDHC card. I am not pleased by this deliberate policy and will change to another more free operating system as soon as possible. Maybe I can even install another operating system onto the 6650, I do not know. Way to go for Nokia to provide a useful gadget for the travelling business user!

How can I add new languages on my phone?

I have an Nokia N80 and i don`t have the French language...How can I add this language on my phone?
Solved!
Go to Solution.

You can't do it yourself, you have to take the phone to a Nokia Care Point.
Note that the absence of a language in the phone is not a fault in the phone if it was originally intended to be sold in an area where French is not spoken, so there may be a charge for installing this language pack.
Also note that language packs installed independently of the firmware do not survive a reset or a firmware update. Therefore, if you do reset your phone or update its firmware, you will loose the language pack and have to have it reinstalled.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Add new languages

Hi,
I must install 4 new languages in 11.5.9 eBS .
I follow the NLS Release Notes ( Part NÂ° B10846-01; Metalink Doc ID 232831.1 ) ,
but I have "only" one doubt .... !
I must choose "Maintain Applications Database Objects" and select the "Maintain the multi-lingual tsbles" task from ADAdmin ... . What do it do ?
It alter tables ....
It insert 1 million of records in a single small table ...
or what ?
Do I must perform some activities in DB for this task ?
Thank you very much !
Mauro

I'd installed two new languages and followed every steps from metalink, patched whatever as needed. It just took time to finish the adpatch (I usually run it overnight) and I don't have much problem with it.
I'm not sure what exactly the AdAdmin doing but just follow what the document said won't hurt :>

To add new language

Hi all,
i am doing a jsp project.Its having i18n concept.
already its having spanish and portugal languages.
now my question is,if i want to add german language
thru my application what should be done?
(ie, i mean the UI and template for the newly added
language).
Thanx in advance for any help,
thirupathi.

Not possible.

Ability to Add new language in MII 12.0

Similar Messages

Maybe you are looking for