Ability to adjust multiple images at the same time as in Bridge

Why the extra step of having to sync develop settings? Why not have lightroom's develop module work like Camera Raw? I would like the ability to select my main image and any others that need the same adjustments, then make adjustments to the one while the others are being updated at the same time just like in ACR. Please add this simple feature - it really saves time and is consistent with the way ACR works.
Also, just realized that syncing metadata does not sync keywords. This needs to be addressed ASAP. Just wondering how the engineers overlooked this! It should do it automatically or as an option in the sync metadata options box that pops up when syncing.
Overall, I really like lightroom and see a lot of potential once it's totally dialed. Please Adobe keep it coming with the updates!
Thanks for listening-
Scott

>Why the extra step of having to sync develop settings? Why not have lightroom's develop module work like Camera Raw? I would like the ability to select my main image and any others that need the same adjustments, then make adjustments to the one while the others are being updated at the same time just like in ACR. Please add this simple feature - it really saves time and is consistent with the way ACR works.
You can already do this a couple of ways...use Auto-Sync or Quick Develop.

Similar Messages

How to fade groups of images or multiple images at the same time?

I am creating a flash infographic, and want to fade images I have imported from Illustrator that are grouped. I would like to know how to fade these groups and multiple images at the same time.
Thanks!

Use TweenMax for this.
the syntax is like this:
var arrayOfDisplayObjects:Array = new Array();
//with arrayOfDisplayObjects.push(DisplayObject)
//you can put any DisplayObject in the Array and when you want to fade them call this
TweenMax.allTo(arrayOfDisplayObjects,1, { autoAlpha:0} );
//to fade them in 1 second to alpha=0 and when reaching the zero make them invisible (to save processing power)

Advancing and Zooming multiple images at the same time.

Hi All,
I have requested this feature since early Lightroom beta 1, so I'm trying again.
Example: I have multiple images opened up in 'Survey' mode, let's say 3 or 4 mages. Which on my Apple 23' Cinema Display makes for much nicer size reviewing, than the largest 'Thumbnail' setting.
The basic ability to hit a combo-keystroke, and advance all the frames at once in 'Survey' mode, to the next set of images of that same total. You know, same as 'page up' or 'page down' in the thumbnail view in the Grid. Also, to zoom all of them at the same time.
Now, I know IiView Media Pro could do this several years ago, before Microsoft turned it into 'Expressions Media', with 4 images at a time. And like I said, I've been requesting it since early LR beta 1. You know, just add a 'Shift' to the Page Up/Down function keys. Or 'Option' or "Control' key.
I love the Survey mode, but surely we can have up to four, or even a half-dozen images, advance at the same time, instead of adding or subtracting one image at a time. As it currently does.
Thanks,
-Sol

Based on the frequency with which this trips up users, the Aperture team is going to have to add a much stronger visual indication that "Primary Only" is active. Marching ants, anyone? Or a pink selection marquee?
At least in the Viewer when multiple Images are selected the thin white selection marquee is dropped when Primary Only is active. There is no such change in the Browser.

How to import multiple images at the same time in illustrator?

How to import multiple images in a document at the same time in illustrator?
It's possible?

Script: Place Multiple Files in Illustrator (Kelso)
http://kelsocartography.com/blog/?p=2047

Removing keyword from multiple images at the same time

None of the documented methods seem to work for me.
1     Select all the images. Go to Metadata > Remove Keyword [my keyword] - the keyword is only removed from the image that is selected in the batch - i.e the one that has the yellow border round it to show it's the active image.
2     Select all the images, enter [my keyword] in the Add Keyword field when Keyword Controls is visible and press Shift + Enter - does the same thing as 1 above (removes it from the active image only).
3     Select all the images, Shift Click on the keyword that I have in my Keyword Controls in the Control Bar - does the same things as 1 above.
So all these methods, which are supposed to work, do not work for me. The removal of the keyword is only applied to the image that has the yellow border showing it to be the currently active image in the selected batch - the remaining selected imaged still retain the keyword. I can remove it "one at a a time" but it would be great if I could find a solution as to why this isn't working.
Any ideas?
If it helps, I'm running Aperture 3.1.3 in OS X 10.6.8.
thanks
Alan

Based on the frequency with which this trips up users, the Aperture team is going to have to add a much stronger visual indication that "Primary Only" is active. Marching ants, anyone? Or a pink selection marquee?
At least in the Viewer when multiple Images are selected the thin white selection marquee is dropped when Primary Only is active. There is no such change in the Browser.

Aperture cannot add GPS data to multiple images at the same time

I am new to Aperture and have been using it for a week or so now. Today I tried to add GPS data to a number of images and found out, it appears Aperture can only add GPS data to one image at the time. When I select multiple images to add the GPS data to, it just doesn't do anything. It leaves the GPS data blank.
Here is what I do:
From the Info-tab I select "GPS" from the drop down menu
At the bottom of the info tab I show the map
In the map's search box I enter the location I want to assign to the photo(s)
From the resulting drop down menu I select the locatiion I want and press the "assign to location" button
As long as I choose only a single image, this works fine and the GPS Data is added. Not so when I select more than a single image. After pressing the "assign to location" button it seems as if the GPS data is added (there is no message indicating otherwise), but the GPS data in the selected images is blank.
What am I doing wrong ?
Additional info
I have been testing this a bit more and the behavior is even more strange: When you select multiple images in Aperture, they get a thin white border, except the one that you touch last (normally the last image of the selection) that will have a thicker border around it. It appears that, when selecting multiple images, the GPS data is ONLY assigned to the photo in the selected setthat has the thicker border (?????)
Message was edited by: dinky2

Rereading your post, I think the problem is, that you are assigning the location from the Info panel and not from the Metadata menu. The Info panel and the Metadata menu ar behaving differently.
The Info panel will always only affect the primary selection, but the Metadata menu will work on all selected images (unless "Primary only" is checked). So , if you want to assign your location to multiple images, use "Metadata > Assign location" instead of the little map in the "Info" panel.
Or use the "Places" view. Then you can drag all images at once to the same pin on the map.
Regards
Léonie

Is there a way to add multiple images at the same time to Keynote 6.0?

I just brought keynote after searching online about adding multiple images to a presentation all in one go - I couldn't do this on the powerpoint version I was using but there were multiple references on google to being able to do this on keynote. I purchased it and now can't get it to work! Any ideas anyone? Thanks

Do you mean like dragging in multiple images and having one image go on each slide? If so, you just drag the images into the Slide List on the left instead of onto the slide. From this prior post.
https://discussions.apple.com/message/9068283#9068283

How can I get rid of multiple pictures at the same time?

how can I get rid of multiple pictures at the same time?

Adobe Bridge, lightroom and your file browser (windows explorer or Mac Finder) can select multiple pictures at once and then delete. If you are looking for more than that for information, you will need to be more specific at what your doing, what OS you have, and version of software your using. If necessary post screen shots so we can see what your doing. The more information we have the more detailed of an explaination can can give back to you.

Multiple images of the same file on one page

How do I create multiple images of the same file on one page? For example, I've got an image that I could fit 6 of on one page, and would like to print it that way instead of printing it on 6 individual pieces of paper.

Are you attempting to do this in Adobe Workspaces? Or are you looking for software that will do it?
If the former, you could insert the image into a Buzzword document six times. Not exactly elegant, but it might do the trick.

How to have multiple images on the same screen? like in the movies where you see several actions at

how to have multiple images on the same screen? like in the movies where you see several actions at the same time ....
i don't find a tutorial in adobe tv....
thanks !!

The short answer is that you'll put the source clip(s) for each inset on a different video track, all stacked up. Then use the Scale and Position effects (under "Motion" on the Effect Controls panel) to reduce their size and place them where you want.
If the content of an inset will involve edited content (where you're cutting among various clips or just trimming out unwanted content from a single clip), then you'll probably find it easier to do all those edits in one sequence, then nest that sequence in the master sequence, where you apply the Scale and Positioning effects. That will save the step of applying the scale and position effects to each edited track item.

WDS 2012 R2 - Cannot PXE multiple clients at the same time

Hello All,
This is my first post on here so I apologize if this is the wrong place. I work for a school district and we are implementing WDS 2012 R2. We've been extremely satisfied with the speeds and ease of use through unattend files. However, for
the past month I've been looking for a possible answer to a problem that has plagued us from day one of implementation.
So here's the problem:
I have a stand alone WDS server which is not a domain controller and is not our DHCP server. I have IP helpers and broadcast forwarders setup on the network. As well as option 66 and 67 in DHCP. So far so good right!
Well that's partially right. When we boot one client at a time to the WDS server. Everything works as intended. We can TFTP the necessary files from the WDS server. Everything boots up and we're off and running.
However, if we boot up two or more clients at the same time. The WDS server never responds to the traffic. The clients get their DHCP information. They start the referral and download from the WDS server, but get no response. I'm
really hoping that someone on here would have some insight of something I can try. I've about exhausted my list of peers and contacts. They're all stumped as well and were smart enough to stay with 2008 WDS.
I would prefer to stick with 2012 R2 since it's setup and working for the most part. With only this one hiccup.
Thanks in advance for any guidance!

Hello Daniel,
I appreciate the reply and apologize for taking so long to get back to this. Things have been a little hectic over here.
I have tried everything on this forum and I am still unsuccessful in PXE booting multiple clients at the same time.
Multicast is enabled on the server, and it works for the clients. However, as stated in the original post. I cannot boot multiple machines at the same time. I can start them from the image selection screen around the same time though. So,
that appears to be working fine.

Is there any version of Indesign that allows to open multiple instance at the same time

I am using Indesign CS3 to generate the bulk reports automatically(programmatically) using Adobe indesign library . One of the key limitation to this tool is it allows to open only one instance at a time unlike word where multiple instances can be opened at the same time. Is there any adobe indesign too version desktop/server which allows to open multiple instances at the same time. Any help on is appreciated. Thanks.

@PeterG
You said "You might want to examine the End User Licensing Agreement (EULA) for any prohibition against using these two instances at the same time with the same license; the license does permit two installs for the same user that are not used simultaneously." I thought that meant you had read the EULA. It's pretty unambiguous on that point.
For everyone's edification about multiple installations and server use with a standard license here's the relevant text:
2. Software License.
If you obtained the Software and any required serial number(s) from Adobe or one of its authorized
licensees and as long as you comply with the terms of this agreement, Adobe grants you a non-exclusive
license to install and use the Software in a manner consistent with its design and Documentation and as
further set forth below. See Section 16 for specific provisions related to the use of certain products and
components, for example font software, Acrobat, After Effects, Adobe Presenter, Contribute, Adobe
Device Central, Flash Player, Flash Builder, and Adobe Runtimes.
2.1 Limited Use. The Software, or portions of the Software, may allow installation and use without a serial
number. If so, you may install but not use such non-serialized Software on any number of Computers as
part of an organizational deployment plan. Further, you may install and use such non-serialized Software
on any number of Computers for demonstration, evaluation and training purposes only and only if any
Output Files or other materials produced through such use are used only for internal, non-commercial and
non-production purposes. You may not use such non-serialized Software after any applicable time-out
period has ended, unless you input a valid serial number under Section 2.2. ACCESS TO AND USE OF
ANY OUTPUT FILES CREATED WITH SUCH NON-SERIALIZED SOFTWARE IS ENTIRELY AT
YOUR OWN RISK.
2.2 General Use. You may install and use one copy of the Software only on the Permitted Number of your
compatible Computers into which you enter a valid serial number.
2.3 Distribution from Server. You may copy an image of the Software onto Computer file server(s) within
your Internal Network for the purpose of downloading and installing the Software onto Computers within
the same Internal Network for use as permitted by Section 2.1 and 2.2.
2.4 Server Use. You may install the Software on Computer file server(s) within your Internal Network only
for use of the Software initiated by an individual from a Computer within the same Internal Network only
as permitted by Section 2.2. The total number of users (not the concurrent number of users) able to use the
Software on such Computer file server(s) may not exceed the Permitted Number.
By way of example, the foregoing does not permit you to install or access (either directly or through
commands, data or instructions) the Software: (a) from or to a Computer not part of your Internal Network,
(b) for enabling Web hosted workgroups or services available to the public, (c) by any individual or entity
to use, download, copy or otherwise benefit from the functionality of the Software unless licensed to do so
by Adobe, (d) as a component of a system, workflow or service accessible by more than the Permitted
Number of users, or (e) for operations not initiated by an individual user (e.g., automated server
processing).
2.5 Portable or Home Computer Use. Subject to the important restrictions set forth in Section 2.6, the
primary user of the Computer on which the Software is installed under Section 2.2 (“Primary User”) may
install a second copy of the Software for his or her exclusive use on either a portable Computer or a
Computer located at his or her home, provided that the Software on the portable or home Computer is not
used at the same time as the Software on the primary Computer.
2.6 Restrictions on Secondary Use by Volume Licensees. If the Software was obtained under an Adobe
volume license program (currently known as Adobe Open Options) by any licensee other than an
educational volume licensee, the second copy of the Software made under Section 2.5 must be used solely
for the benefit and business of that volume licensee. For more information about secondary use by volume
licensees, please visit our Web Site at http://www.adobe.com/go/open_options.
There is also language stating that if you have a dual boot or other system capable of running more than one OS you will need a separate license for each platform if you want to run the software on more than one.

Can you use sync on multiple computers at the same time? ie have someone else logged into your firefox account for you whilst you are also logged in

I am trying to sign up to something but there is only a short window so was going to ask a friend to sign in at the same time using my account to try to sign up (with my password being saved into my firefox account)

Hi. Yes, you can use Sync on multiple devices at the same time. I use it to keep my bookmarks in sync across my desktop and Android versions of Firefox.

Is there a way to delete multiple pictures at the same time from the iphone4s?

Is there a way to deleter multiple pictures at the same time, from my iphone4s? I know how to delete one at a time. Thanks

Open your Photos App > Camera Roll > At the top right corner you will see a rectangle with a right arrow, select that. Now you can select as many photos as you want and you can hit the red Delete button on the bottom right.

CRVS2010 - open multiple rpts at the same time, like sheets in a xls file ?

Hi all,
is that possible to open multiple reports at the same time, like sheets in a excell file ?
Is that possible create tabs beside the MainReport tab ? or include reports in the Group Tree ? how can I do it ?
The application is in asp.net with VS2010 and CR2010.
The reports used to be in excell with three sheets and now we are migrating them to crystal reports, how can I create the report with those three sheets ?
thanks !
Subject modified as per the sticky post at the top of this forum; [Crystal Reports for Visual Studio 2010 Beta - read before posting|Crystal Reports for Visual Studio 2010 Beta - read before posting;
Edited by: Ludek Uher on Aug 31, 2010 7:33 AM

I'll make the suggestion to the Program Management group.
You may want to do a post to the [Crystal Reports Design|SAP Crystal Reports; forum and ask them how they's fake that sort of a requirement. E.g.; there may be some way to make this report look the way you want, but it will be best to ask the experts. Don't mention CRVS2010 as they don't support it and most likely you will not get an answer.
Ludek

Ability to adjust multiple images at the same time as in Bridge

Similar Messages

Maybe you are looking for