Ability to connect to yammer?

Tried to using XML but it is not well formed for Power Query to extract the data. Is there any plans for this?

Good idea! It makes sense since we also support Facebook. I'll make sure this is on the data source requests list. Thanks for the feedback.
UPDATE: Good news, it was already requested by other users and is on our radar!

Similar Messages

Officejet pro 8500A; loses ability to connect to the server

Hi all,
For the past month or so, my network printer has developed a glitch. Everytime I or my family sends a document to print, we see the messaging "preparing to print" and the printer never prints! I ran the printer trouble shooting on my Windows 7 professional and was given the message: "The printer was unable to connect to the server. You can connect to the printer to the internet through a proxy server, to do so, touch Enter Proxy and enter details when prompted"
Well, I've never used a proxy. My printer was working fine till recently.
The only temporary "fix" I could come up with was to shut down the printer and power it back on. It would go through a checking printheads or cleaning printheads, etc. Sometimes the "eprint" button would be circled in red. If so, I hit it and asked to retry finding the server. This usually works. After all this, I had a small ( 1hour?) window that I could print or scan documents. After this, the printer develops a case of amnesia and I'm back to square one.
I've downloaded the latest drivers. Windows updates are current.
This is getting extremely frustrating. What the heck is going on???
Thanks

Hello @fsh42na,
Welcome to the HP forums.
I understand that you are experiencing some network issues with your Officejet Pro 8500A.
I would like to help.
The printers ability to connect to the Web Services server should have no impact on your local network printing.
It sounds to me like you have two separate issues.
Your temporary fix of turning off the printer is a step in the right direction.
When your printer powers back on, it connects with the router. This new connection is what gives you the ability to print.
Since it only lasts for an hour try the following:
Turn off your printer and other network devices.
Unplug the power cord to your router for at least a minute.
plug the power cord back into the router.
Turn on the printer and other network devices.
Test print.
If you use the Web Services (ePrint) feature on your printer, try setting a manual DNS.
Though the server connection issue will probably get resolved with the network reset, the manual DNS will not hurt anything.
The following reply by happytohelp01, has instructions for setting a manual DNS.
Efax 7510 still won't work after turning off/on ePrint several times
The post is for a Photosmart 7510, but the steps should be very similar.
If you need any further assistance, please let me know.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

I have recently lost the ability to connect my ipad to Apple TV. Any thoughts?

I have recently lost the ability to connect my ipad to Apple TV. Any thoughts?

Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.

Lost ability to connect to open WiFi router

I've been using Leopard 10.5 that was installed when I bought the computer, and just updated to 10.5.4 which solved a problem I had running the original Adobe CS, InDesign was running 100+ percent of the CPU and crashing. But, I also lost the ability to connect to the open, non-WEP WiFi network in my studio. I have no idea why it won't connect and the computer connects fine at home to my airport. I think the router at my studio is a Linksys or something, but I really need to get my MacBook Pro to connect back to the router. Also, airport seems to be scanning continuously and fails to show the networks quickly. It seems very laggy.
Any suggestions?

If you see line after line of "Airport Beacon (Lost)" messages, the problem is with 10.5.3 upgrade, if you installed 10.5.4 a few days later when it came out, you still have the problem.
That is simply not true. Beacons can be "lost" for a lot of reasons - and it has been happening to some people before 10.5.3 [Check the history!|http://discussions.apple.com/search.jspa?threadID=&q=airport+10.5.2&ob jID=&dateRange=thisyear&userID=&numResults=15&rankBy=10001]. It might be the 10.5.3 upgrade in some situations. I am a bit suspicious of the interaction between some Netgear routers and OS X, but I have not tested that theory very thoroughly.

Update(s) break ability to connect to bank web site(s)

One of the recent updates to 10.7.3 - either a security update or the Java update - has broken the ability to connect to certain bank web sites from ANY browser, including Internet Explorer running under Parallels. The latter makes me suspect that something in the hidden antivirus technology is blocking certain internet communication. Disabling the firewall makes no difference - and the sites will not appear with Safari (32 bit or 64 bit mode), Chrome or Firefox any longer.
The site we're running into problems with is: http://www.ourbank.com
But, in this thread:
https://discussions.apple.com/thread/3801713
and others on the internet, people are reporting issues with First Bank, Bank of America and others as well.
I initially responded to a similar thread in the Safari forum - but determined this has nothing to do with Safari / Webkit as it affects all ocmmunication on the Mac to the sites in question. (Even ping fails.)
On my same network, a standalone XP machine with IE 8 connects instantly, as does an iPad (IOS 5.1). So, it is not a DNS issue or a network issue. It is only the Macs after the last round of Software Updates.
Out of ideas as to what to do to get access back on our Macs ...
Ideas?
Thanks,
Karl

Well, I think I have finally come up with a solution. It seems this issue happens when it auto locks. I turned auto lock to "never" in settings, and the issue has not happened since. Seems there may be a bug in this feature???
I now use manual lock, and upon awakening the wifi is now fully working.

Have suddenly lost ability to connect to internet. Account and bills up to

I have suddenly lost ability to connect to the internet, include itunes and App Store. Account and bills up to up date. ANy assistance appreciated

I am having this problem as well. In the last week or two, my calendars haven't been syncing properly. Nothing goes updates to my main computer from the phone. Then in the last few days I could only access the internet sporadically, today not at all. No map showing in the gps, safari doesn't work, no weather... It says 'Safari could not open the page because the server stopped responding'. The 3G wheel is spinning and shows that there is service.
I reset my phone completely a couple of days ago, reset history/cache, etc in settings, have turned it off and on, etc with no change.

Suddenly lost ability to connect on FaceTime? help?

Why would I have suddenly lost ability to connect on facebook?

Apple is having problems with os6 update. The system has crashed a couple of times, and they are working on the problem.

Lost the ability to connect to both WiFi and Bluetooth on my iPhone 4S. Any suggestions on how to fix this?

Lost the ability to connect to both WiFi and Bluetooth on my iPhone 4S. Any suggestions on how to fix the problem?

Have you followed http://support.apple.com/kb/TS1559 ?
Also try settings>general>reset>reset all settings
If you have followed that article and restored your phone and set it up as new and you're still having that issue you may call and explain you followed the article and are still having the problem. Most likely they will either set up a replacement for you. If they ask you to set up the one time phone support agreement, and they assist you with a restore again, they won't bill you if they end up having to repair it.

Have lost ability to connect Cisco VPN - Westell 6100G modem and Netgear WNR1000 v2 router

I have lost the ability to connect my work laptop VPN through my verizon dsl connection. It works at the library, at hotels, and over my BB tether. Corporate IT thinks it is either the router or the modem. There are also some websites that will not load, such as tetongravity.com. The websites seem to be a problem over a wired connection as well as wireless, and I have only tried attaching the VPN while on a wirelesss connection.
Any advice on how to straighten this out? I have rebooted both a couple of times and updated the firmward on the router to no avail. Also, do you know what the default user name and password are on the modem?
Any help would be appreciated.
John

PS - it worked last week, and stopped working over the weekend.

Since downloading IOS 7.0 on my iPhone 4 I do not have the ability to connect to wifi. I can't even move the on/off button at all. Also, the "personal hot spot"

Since downloading IOS 7.0 on my iPhone 4, I cannot connect to wifi. The button is greyed out, so I can't even turn it on. I can't download the upgraded version that fixes some of the bugs because you have to be able to connect to the internet to download it. I also noticed that under "Settings", my Bluetooth and Personal Hot Spot settings are constantly roaming with the circle that just keeps going around and around. I've tried everthing (I think). It was directly related to the 7.0 download because it happened right away. Any ideas? I listen to a lot of eBooks when I commute each day and I need to connect to the internet to download the full versions. I miss my books!!

See if this helps you with the wifi issue. http://support.apple.com/kb/TS1559

Updated Iphone 6 to 8.1.1 and have lost the ability to connect to wi-fi. What can I do to fix this problem?

After downloading 8.1.1, can no longer connect to wi-fi. The phone sees the wi-fi, but, does not connect. I have tried rebooting the phone, tried turning the wi-fi off and back on. What other steps can I take to fix this?

UGgh i have iphone 4s and its the same problem, been looking for a solution all day but nothing worked. Sorry i cant help but i think a solutionwill come up soon because it is it keeps popping up more frequently. There is one thing if you can find reset network settings in the settings that might work but it didnt fr me

Lost ability to connect to the internet on my desktop after installing Mavericks on my laptop, is there a connection?

Hi all,
I recently installed Mavericks on my laptop. I have an Ethernet cable I connect to my modem to gain access to the internet. I have another Ethernet cable I use on my desktop computer and I connect THAT cable to the modem when I want to gain access on the desktop. Right now, I have access to the internet on my laptop but not on my desktop. The internet service provider checked everything and could not find a problem. They suggested I contact Apple. Is there any connection between my recent upgrade to OS X Maverick on my laptop and my internet connection issue on the desktop? Last thing, the internet service provider suggested that the problem lies in some setting or preference...Thank you in advance!

Unless you router is an Apple Airport, I doubt that updating your laptop would have changed anything, but who knows.
I would recommend trying to hold the reset button on your router for 30 seconds. This may fix the issue, but this will probably erase all of your router's settings like wifi passwords and stuff like that.
~ ~ ~
If you don't want to risk completely resetting your router, I would suggest trying the following:
– On your laptop (which has a connection)
– Go to System Preferences >> Network >> Advanced >> TCP/IP
– Write down the IP number next to "Router"
– – – Mine looks like this:    192.168.1.125
– Go to your browser (Safari etc.) and go to     http://RouterIP
– – – Where "RouterIP" is the number you wrote down before. Mine looks like this:    http://192.168.1.125
This will take you to your router's settings page.
It will probably ask you for a username and password. They probably are:
User:    admin
password:   admin
or
User: admin
Password:   your router/wifi password
Look all the settings on this site and see if everything is set to reasonable values.
~ ~ ~
If all else fails, then it's probably something to do with the settings on your desktop PC.
Best,
Vlad

Lost ability to connect with Server from workstation

NW 6.5 sp5 on a Dell 2900. I am adding an additonal harddrive to our server
for use as an archive disk in a separate volume. After I loaded it into the
server and created a new VD in the raid bios I booted the computer and found
I couldn't connect from my workstation to connect to IManager. When I
looked on the logger screen I got messages about a possible bad certificate
with suggestions to run sys:/system/tckeygen.ncf or
ndlap or
sys:/tomcat/4/bin/startup-config sys:/adminsrv/conf/admin_tomcat.xml
Nothing helped.
I rebooted the server again and did not get the messages above I looked
through the logger screen and found several messages, I have no idea whether
they are new or common.
"default domain not set, you need to set it through ypset unable to log in:
error -601... NFS service initialization failed during edirectory interface
library (ndsilib.nlm) initialization
error code 9600 unloading znfs.nlm"
SFNS.NLM did not load try running schinst -n
sys:\etc\schinst.log
I have pasted the log contents:
"Info:434:11-7-2006 12:16:07 pm :
Logging into the tree : MIGRATE
This will take few moments...
Info:436:11-7-2006 12:16:07 pm : Modifying NDS schema from file :
sys:/system/schema/uam.sch.
Info:434:11-7-2006 12:16:07 pm :
Logging into the tree : MIGRATE
This will take few moments...
Info:436:11-7-2006 12:16:07 pm : Modifying NDS schema from file :
sys:/system/schema/nis.sch.
Info:434:11-7-2006 12:16:07 pm :
Logging into the tree : MIGRATE
This will take few moments...
Info:436:11-7-2006 12:16:07 pm : Modifying NDS schema from file :
sys:/system/schema/nisupgd.sch.
Info:99:11-7-2006 12:16:08 pm :
Login was successful.
Info:98:11-7-2006 12:16:08 pm : Added the object : .CN=NFAUUser.O=mgamigrate
Info:71:11-7-2006 12:16:08 pm : The config file nfs.cfg has been
successfully updated.
Info:116:11-7-2006 12:16:08 pm :
UNIX Profile of user .CN=NFAUUser.O=mgamigrate has been set as UNIX root
user.
Info:99:11-7-2006 12:16:08 pm :
Login was successful.
Info:98:11-7-2006 12:16:08 pm : Added the object :
..CN=NFAUWorld.O=mgamigrate
Info:133:11-7-2006 12:16:08 pm :
SCHINST:WORLD: UNIX Profile for the .CN=NFAUWorld.O=mgamigrate Group object
has been added and UNIX Gid is set to 65535.
Error:43:7-8-2009 8:22:30 am : Unable to login. Error Code : -601"
the screens available on the server are:
system console
logger screen
timesync debug screen
novell ssl server handshake
pkernel
java interperter
netware 6 console monitor
gwia webaccess
mta
poa
any ideas?

I am posting an edited copy of the logger file, there are some error
messages but nothing stands out to me. any help would be appreciated. I
have no idea what is going on. I have attached the entire logger file if I
deleted too much.
IPXS-4.10-0022:
Warning, unable to open default IPX configuration file
"SYS:ETC\IPXSPX.CFG"; using internal defaults.
Module IPXS.NLM load status OK
Module PERL.NLM load status OK
Perl 5.8.4 - Command Line Interface
Version 5.00.05 September 13, 2005
Copyright (C) 2000-01, 2004-05 Novell, Inc. All Rights Reserved.
Module PERL.NLM load status OK
Java Hotspot 1.4.2_09 Interpreter
Version 1.42.06 December 1, 2005
(C) Copyright 2003-2005 Novell, Inc. All Rights Reserved.
Module JVM.NLM load status OK
Loading module DSAPI.NLM
This module is ALREADY loaded and cannot be loaded more than once.
Module DSAPI.NLM load status NOT MULTIPLE
Loading module CLXNLM32.NLM
This module is ALREADY loaded and cannot be loaded more than once.
Loading module PKI.NLM
This module is ALREADY loaded and cannot be loaded more than once.
Module PKI.NLM load status NOT MULTIPLE
Default domain is not set, you need to set it through ypset
Unable to Login. : error -601. Run schinst -n and try again. If the problem
stil
l persists, see the TroubleShooting section of the admin doc.
Could not authenticate ContextHandle.Run schinst -n and try again. If the
proble
m still persists, see the TroubleShooting section of the admin doc.
Exiting...-6
01
Module NDSILIB.NLM is being referenced
You must unload NISSWDD.NLM before you can unload NDSILIB.NLM
Install for Novell eDirectory
Version 10553.21 February 10, 2005
Copyright (c) 1993-2004 Novell, Inc. All rights reserved.
Loading module XNFS.NLM
Module DSBACKER.NLM load status OK
NetWare NFS - NFS Server for NetWare 6.5
Version 1.01.10 November 28, 2005
Copyright (C) 2002-2005, Novell, Inc. All Rights Reserved.
Error : NFS services initialization failed during eDirectory interface
library
(ndsilib.nlm) initialization - Error Code : 9600. Unloading XNFS.NLM.
Error : Try running 'schinst -n'. For details refer to Native File Access
doc
umentation.
SERVER-5.70-1553: Module initialization failed.
Module XNFS.NLM NOT loaded
Module XNFS.NLM load status INIT FAIL
Module DSBACKER.NLM unloaded
Module PSA.NSS load status OK
Loading module APACHE2.NLM
Apache Web Server 2.0.54
Version 2.00.54 October 31, 2005
Copyright (c) 2000-2004 The Apache Software Foundation. All rights
reserved.
Auto-Loading Module APRLIB.NLM
Auto-loading module APRLIB.NLM
Apache Portability Runtime Library 0.9.6
Version 0.09.06 October 31, 2005
Copyright (c) 2000-2004 The Apache Software Foundation. All rights
reserved.
Loading module SASL.NLM
Module APRLIB.NLM load status OK
Module APACHE2.NLM load status OK
Simple Authentication and Security Layer 2.4.0.0 20051107
Version 24000511.07 November 7, 2005
Copyright 2002-2005 Novell, Inc.
Loading module LANGMAN.NLM
NISSERV - Error initializing NDSILIB at startup
Module NISSERV.NLM load status OK
Novell Cross-Platform Language Manager
Version 10310.47 August 9, 2004
Copyright 2001-2003 Novell, Inc. All rights reserved. Patents Pending.
Module LANGMAN.NLM load status OK
Loading module XNFS.NLM
NetWare NFS - NFS Server for NetWare 6.5
Version 1.01.10 November 28, 2005
Copyright (C) 2002-2005, Novell, Inc. All Rights Reserved.
Loading module HT2SOAP.NLM
Error : NFS services initialization failed during eDirectory interface
library
(ndsilib.nlm) initialization - Error Code : 9600. Unloading XNFS.NLM.
Error : Try running 'schinst -n'. For details refer to Native File Access
doc
umentation.
SERVER-5.70-1553: Module initialization failed.
Module XNFS.NLM NOT loaded
Module XNFS.NLM load status INIT FAIL
eDirectory Management Tool Box HTTP to SOAP shim
Version 10553.52 July 29, 2005
Copyright 2001-2005 Novell, Inc. All rights reserved. Patents Pending.
Loading module EMBOX.NLM
Module HT2SOAP.NLM load status OK
This module is ALREADY loaded and cannot be loaded more than once.
Module EMBOX.NLM load status NOT MULTIPLE
Loading module AIOCOMX.NLM
Loading module EMBOXMGR.NLM
Novell AIO Serial Port Driver
Version 6.00.02 December 18, 2002
Copyright 1992-2002, Novell, Inc. All rights reserved.
Auto-Loading Module AIO.NLM
Auto-loading module AIO.NLM
NetWare Asynchronous I/O Library
Version 7.00.08 November 18, 2003
(c) Copyright 1992-2003 Novell, Inc. All rights reserved.
Module REPAIRTL.NLM load status OK
Perl 5.8.4 - Command Line Interface
Version 5.00.05 September 13, 2005
Copyright (C) 2000-01, 2004-05 Novell, Inc. All Rights Reserved.
Module PERL.NLM load status OK
Perl 5.8.4 - Command Line Interface
Version 5.00.05 September 13, 2005
Copyright (C) 2000-01, 2004-05 Novell, Inc. All Rights Reserved.
Module PERL.NLM load status OK
Version 1.01.16 October 22, 2005
Copyright (c) 2002-2003 Novell, Inc. All rights reserved.
Module IPMCFG.NLM load status OK
Initializing debug network.
Finding IP interface.
Loading debug MLID...
Loading debug module BX2.LAN
Broadcom NetXtreme II Gigabit Ethernet Driver
Version 1.22 November 8, 2005
Copyright (c) 2002 Broadcom Corporation. All rights reserved.
Auto-loading debug module ETHERTSM.NLM
Novell Ethernet Topology Specific Module
Version 3.89 January 27, 2003
(C) Copyright 1990 - 2003, by Novell, Inc. All rights reserved.
Auto-loading debug module MSM.NLM
Novell Multi-Processor Media Support Module
Version 4.10 January 24, 2003
Copyright (c) 1990 - 2003, by Novell, Inc. All rights reserved.
Interrupt assignment: 4
Interrupt assignment: 4
Starting service NetWare Administration Tomcat
Apache Tomcat/4.1.31
Starting service Tomcat-Standalone
Apache Tomcat/4.1.31
Jul 9, 2009 5:37:42 PM org.apache.struts.util.PropertyMessageResources
<init>
INFO: Initializing, config='org.apache.struts.util.LocalStrings',
returnNull=tru
e
Jul 9, 2009 5:37:42 PM org.apache.struts.util.PropertyMessageResources
<init>
INFO: Initializing, config='org.apache.struts.action.ActionResources',
returnNul
l=true
Jul 9, 2009 5:37:43 PM org.apache.struts.util.PropertyMessageResources
<init>
INFO: Initializing, config='org.apache.struts.util.LocalStrings',
returnNull=tru
e
Jul 9, 2009 5:37:43 PM org.apache.struts.util.PropertyMessageResources
<init>
INFO: Initializing, config='org.apache.struts.action.ActionResources',
returnNul
l=true
Jul 9, 2009 5:37:44 PM org.apache.struts.util.PropertyMessageResources
<init>
INFO: Initializing, config='org.apache.webapp.admin.ApplicationResourc es',
retur
nNull=true
Jul 9, 2009 5:37:44 PM org.apache.struts.util.PropertyMessageResources
<init>
INFO: Initializing, config='org.apache.webapp.admin.ApplicationResourc es',
retur
nNull=true
Loading module WPSD.NLM
ServiceDescriptor Natives NLM
Version 2.00 August 8, 2005
Copyright (c) 2003-2004 Novell, Inc. All rights reserved.
Auto-Loading Module N_PRDDAT.NLM
Auto-loading module N_PRDDAT.NLM
N_PRDDAT
Version 1.00 February 3, 2003
(C)Copyright 2003, Novell, Inc. All Rights Reserved.
Module N_PRDDAT.NLM load status OK
Module WPSD.NLM load status OK
Jul 9, 2009 5:37:55 PM org.apache.jk.common.ChannelSocket init
INFO: JK2: ajp13 listening on /0.0.0.0:9009
Jul 9, 2009 5:37:55 PM org.apache.jk.server.JkMain start
Novell GroupWise WebAccess
Version 6.5.6
(C) Copyright 1993-2005 Novell, Inc. All rights reserved.
<GroupWise WebAccess> WebAccess Servlet is ready for work
Novell GroupWise WebAccess Spell Checker
Version 6.5.6
(C) Copyright 1996-2005 Novell, Inc. All rights reserved.
Maximum suggestions: 10
Dictionary path :
SYS:\Tomcat\4\webapps\ROOT\web-inf\classes\com\nove
ll\collexion\morphology\data
<GroupWise WebAccess Spell Checker> Spell Servlet is ready for work
Jul 9, 2009 5:38:04 PM org.apache.jk.common.ChannelSocket init
INFO: JK2: ajp13 listening on /0.0.0.0:9010
Jul 9, 2009 5:38:04 PM org.apache.jk.server.JkMain start
INFO: Jk running ID=0 time=1/176 config=sys:\tomcat\4\conf\jk2.properties
Loading module EDIT.NLM
NetWare Text Editor
Version 8.00.01 October 13, 2005
Copyright 1989-2005 Novell, Inc. All rights reserved.
Module EDIT.NLM load status OK

Ability to connect Audio Cable for Apple TV to Apple Speaker

Can I connect my Apple TV XtremeMac XtremeHD Toslink Audio Cable for Apple TV to my external Apple Iphone speaker?
There is only a single audio cable connection behind the speaker that normally goes from the Iphone.
Is there some sort of adapter I can use?
Thanks.
Rick

Can I connect my Apple TV XtremeMac XtremeHD Toslink Audio Cable for Apple TV to my external Apple Iphone speaker?
There is only a single audio cable connection behind the speaker that normally goes from the Iphone.
Is there some sort of adapter I can use?
Thanks.
Rick

Lost all ability to connect to internet - Please Help!!

This evening, opened my MBP 2010 and found that my networks will not connect to internet. It says I'm connected to wifi but nothing will load, no apps that require network connection, safari, nothing. Tried ethernet cable which says connected with DHCP when I'm looking at network prefs, but no connection of any kind. I have a Verizon Fios router with Time Capsule (most recent version from Jan 2012) creating a separate network and a AEBS and Airport Express extending that network throughout the house. No problems of any significance (that couldn't be solved with turning router on and off) in the past. Of note, my wife's Macbook Air (which I'm typing this email on) is having NO problems connecting to either the Verizon network or the Airport network. On my MBP, I get neither. I have tried deleting the networks from Network Prefs and adding back but they just will not connect. Is there a way to completely reset my network prefs and start over? Do I need to do that? How can I have one Macbook that connects to everything and another that can't connect to anything. Both are running 10.7.4 and have similar software installed. I tried booting in SAFE MODE and get the same results. I even get the exclamation mark inside the wifi symbol on my menu bar for both of them. WHAT THE HECK is going on??!!? PLEASE HELP!!!

OK, I understand that you can connect to the Verizon router using an Ethernet connection and wireless does not work.
I also understand that you have deleted all of the network listings in System Preferences > Network > WiFi > Advanced.
Please check again to make sure that all of the listings are cleared out. Be sure to click OK and then Apply when you do this.
Next, open Macintosh HD > Applications > Utilities > KeyChain Access
Look for any listing with the name of the Verizon wireless network. Click on that listing to highlight it, then click the Delete key on your Mac.
Then do the same for any of the wireless networks that are provided by the Apple devices.
Close KeyChain Access and restart your Mac.
See if you can log on to the Verizon wireless network now. You should be asked for the password to connect, if you successfully deleted the old networks and the listings for the password in KeyChain Access.

Ability to connect to yammer?

Similar Messages

Maybe you are looking for