Ability to set same Start date for two different discrete Job in ASCP
We have two ATO Items and these to be built & shipped together which have different leadtimes, How we can have achieve same start date when we release from ASCP.
E.g: ATO_Model1*24234 SO Line 1, the rolled up LT=10Days
ATO_Model2*325325, the rolled up LT=3
So, under normal scenario ASCP will suggest two different release dates based on LT. So, I would like to start both Job togther considering the max leadtime.
Hoping for your expert advice.
Thanks
Edited by: user604737 on Nov 10, 2010 9:55 AM
Hi,
964188 wrote:
It is a date
Such as
10/31/2012 11:55:03 PMThen, as Hoek says, you don't want TO_DATE. For example:
WHERE TRUNC (start_datetime) = TRUNC (SYSDATE - 7) or the more efficient
WHERE start_datetime >= TRUNC (SYSDATE - 7)
AND start_datetime < TRUNC (SYSDATE - 6)Also, it doesn't look like the EXISTS sub-query is corelated to the main query. That's almost certainly a mistake.
If you're still having trouble, post your revised query, a little sample data (CREATE TABLE and INSERT statements). Point out where that query is givimg the wrong results, and explain how to get te right results.
See the forum FAQ {message:id=9360002}
Similar Messages
-
How to achieve same start date for two ATO Items- req to built together
We have two ATO Items and these to be built & shipped together which have different leadtimes, How we can have achieve same start date when we release from ASCP.
E.g: ATO_Model1*24234 SO Line 1, the rolled up LT=10Days
ATO_Model2*325325, the rolled up LT=3
So, under normal scenario ASCP will suggest two different release dates based on LT. So, I would like to start both Job togther considering the max leadtime.
Hoping for your expert advice.
ThanksHi,
Please check Vendor Master data: FK02 ->company code data -> Payment transaction accounting: unflag 'individual payment'.
Make a test and let me know if it's okay.
regards -
Same number range for two different series groups?
Dear all,
There are two scenarios
1.Normal export under bond case, series group is 20 and number range maintained,running number is 300016
2.Another scenario,where ARE1 document generation for Deemed exp customer(already customised) , series group is 30.
But, client requirement is , for this second scenario also, system should pickup running number range of series group 20(under bond case) as per excise legal requirement
Ie running number is for series group 20 is 300016
For the above deemed exp case (second scenario)it should pickup 300017
And again when they do under bond case(first scenario), it should pick up 300018 like that
Is it possible to maintain the same number range for two different series groups(20 and 30)?
Even if you maintain the same number range for 30, as per running number range of 20
Will the system update simultaneously the same number range for 20 and 30 series groups?
Please suggest the way.With two different series groups, it is not possible to have the same number range. Even if you maintain it, they will be treated independently.
Normally, you should not use different series groups if the same number range has to be used. In fact, the concept of series group has been developed to ensure that number ranges can be maintained separately.
Regards,
Aroop -
How can I define same Price Conditions for two different Sales Deals ??
I need to define for the same price condition, lets say ZPMP, two different values or condition records, for two different sales deals and the same valid dates
For example, Sales deal 1, ZPMP equal to USD 15 and valid dates from 04/15/08 to 04/30/08.
Another condition record for Sales deal 2, ZPMP equal to USD 20 and valid dates from 04/15/08 to 04/30/08
How can I do this.
Thanks in advance.While creating condition tables, you have the option to create different key combinations. So if you want the system to take different condition records for different sales deals, there has to be a point of differentiation between those 2 sales deals.
This can be done in one of the following ways:
by giving customer specific prices
by giving material specific prices for a particular customer etc
All this can be defined as different key combinations while creating the condition tables. For each key combination, you can specify different condition records, so that the system is able to pull prices according to the requirement.
But if the sales deals are entirely similar (that is even the validity dates, delivery dates etc are also same), and there is no differentiating factor, then you will have to manually input the prices.
Do get back if you require more clarification. Please reward points if useful.
Regards,
Swapna -
How to link the same horizontal page for two different vertical pages without duplicate them?
Hey guys,
Is there a way to link the same horizontal page on two different vertical pages without duplicate the horizontal page?
I have a doublepage of a book splitted in two parts in different vertical pages but i want link the fullsized image in the horizontal page for both of them. Got that? hahaha
Thank you allConfusing But interesing.
I think it's possible. I have a idea. It will need one advanced trick.
To explain it, I need test simply haha. -
Using Same Bank Account for two different company code
Can we use the same bank account number and ABA key for two different company codes? Both the company codes are in USA and with the same currency.
Scenario is to separate one division of the company code to a separate company code. Client wanted to know if we can use the same bank account so that they dont have to open another bank accountThe system will allow the same ABA and bank account on two different company codes. However, if you use electronic bank statement (EBS) functionality (or plan to use it in the future), you will not be able to import bank statements for the account if it exists on two company codes. The EBS program uses the house bank/account ID tables to assign a company code to the bank statement. If the account exists for more than one company code, the program cannot assign a company code and it will give an error.
Regards,
Shannon -
Same Apple ID for two different country accounts?
Is it possible to use just one Apple ID for two different iTunes accounts? I've recently located to Australia from the uk and want to run an iTunes Store account in each but with just one apple id and email address. Can it be done?
You have to be in a country to use its store (and an account can only have one billing address on it), so whilst you are in Australia you can only use the Australian store, you cannot use the UK store (including redownloading past purchases). You can either update your billing address on your existing account to have your Australian address on it, or create a new account with your Australian billing address on it
Changing country on an account : Change the country of your iTunes Store, App Store, iBooks Store, and Mac App Store account - Apple Support. -
Setting up start date for automatic backup
IS there instructions on how to set up automatic back up setting start date WD Element 3 tb external hard drive. I have previous backups on another external drive and do not want to duplicate what I already have backed up...any help would be appreciated...mo_reb
Hello, welcome to the community.
The WD Elements does not have any backup software to do this, you will need a third party software to perform a backup with this drive. -
How do I set default start date for email flags
In IOS 4 and 5 every time i put a flag on an email it used "today's date" as the default date for the flag when the flag synched with Outlook. Under IOS6, my email flags show up in Outlook with "no date". Is this an IOS 6 change or did I somehow change the default to "no date" by mistake on my iphone. This is importatnt becasue Outlook allows you to arrange you inbox by Flag Start Date. When you arrange it this way, all the flagged emails move to the top by date. You can then remove all the non-flagged emails as a group.
Yes. On my new iPhone 5 the iCal week begins on a Monday not a Sunday and does not give me the option to edit in settings on the phone
-
How to Use Same Navigation Panal for two different query
Hello,
My requirement is I have to display three different report in same web template in three different tab.
I have created a custom web template with tab.
in each tab i have assigned three different analyser table and assigned three different report in each data provider. once I run the report that works fine, each tab is displying each report seperately.
The problem I am having here with navigation panal. Navigation panal is working ok for 1st report, but when I go to the 2nd tab for 2nd report nev attribute itself is not displying. is there any special setting that i am missing?
If any one know about the same pls help me
Thanks
SamitHi
When u select the Generic navigational block to ur template. select that and right click go to properties, in the lift side of u web item will come in that last but one option is Affected data providers is there double click on the list u will get the option
Shashi -
Same cost booking for two different cost center
i am facing a problem.
the problem is that here same cost is book under two different cost center @ the ratio of 50%.
how it is possible.Hi,
What i understand from your question is that in one FI document there are 2 cost center against same cost element with 2 different line.
If it is so then it is correct.
User has enter same cost element twice and enter different cost center and dividing the cost equally.
Regards,
Shayam -
How to set a start date for inputDate calendar
The inputDate component in the ADF faces library is not allowing the user to choose a start day other than the current day for the calendar. (We are using JDeveloper 11.1.1.0.0) We found out that a fix was made to MyFaces trinidad in July 2006 for this exact issue(http://issues.apache.org/jira/browse/TRINIDAD-458).
Does anyone know if this fix ever made it to the ADF library, or if there is an existing way we can resolve this issue.Dear Rohan,
You can set default value to custom field thru Lookup table. Assign lookup table to custom field and set default value to some lookup value (Note: check the “Choose a value to use as a default when adding new item” checkbox).
Regards,
Avinash kumar | Blog:http://avigr8.wordpress.com | If you found this post helpful, please “Vote as Helpful”. If it answered your question, please “Mark as Answer”. -
Content Conversion- Same keyfield value for two different sub structure
Hi,
I have a scenario where the key field value for the 2 substructure of record structure is same.
MY XML structure is like this :
<documentName>
<recordset>
<Header>
<field-nameA1>
<field-nameA2>
<field-nameA3>
<ITM1>
<field-nameB1>
<field-nameB2>
<field-nameB3>
<ROW1>
<field-nameB1>
<field-nameB2>
<field-nameB3>
<ITM2>
<field-nameB1>
<field-nameB2>
<field-nameB3>
<ROW2>
<field-nameB1>
<field-nameB2>
<field-nameB3>
The sample text file is given below where line no. 3 and 5 are different substructure(For ROW1 and ROW2 respectively) with same keyfield value.
"HDR",399,"file",20050302,100642,3289
"ITM1",2,3,4,5,6,7,8,9,10
"ROW",3,4,5,6
"ITM2",2,3,4,5,6,7,8,9,10
"ROW",7,8,9,10
After content conversion I get a XML structure in which there is no ROW2 and all data within the fields of ROW2 are put under ROW1 as the key field values are identical.
In the records only the first field is constant (e.g. ROW).
How to handle such a scenario?
Regards
Satish ChauhanUnless you can somehow expand the key, I don't know that this is possible. The key implies uniqueness - and in your case, unfortunately, it isn't. Is there any way to edit the structure to make it more unique for you? Do you have any control or ability to change that?
Maybe if you add unique keys in your mapping, you can strip them off with content conversion on the way out using the parameter keyFieldInStructure=ignore? -
Same error code for two different errors
I have a simple state machine with a few states, two of which are read ini file and read GPIB data. I also have an error handling state where I would like to handle all errors. Errors are checked for on each iteration of the loop, passed by shift register. However, I can't just unbundle the error cluster and wire the error code to a case structure because if the ini file doesn't exist (error code 7) I want to exit the program. But if I get error 7 from the gpib (Nonexistent GPIB interface) I want the program to continue running. What is the best way to track where the error is coming from so I know how to handle it when two error codes for different errors have the same error code value?
Message Edited by for(imstuck) on 01-27-2010 03:47 PM
CLA, LabVIEW Versions 2010-2013Another option is to check the existence of the file before opening the config file, then exit the program if nessecary. Relying on error codes might be a bad option.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be! -
How can we use same material code for two different sales area
Hello friendsu2026
Hope you all doing well
I am facing a problem and I will be thankful to all of you, for your suggestions
Issue:
I have a *material created in 3000/10/19 for domestic purpose *,now our company has decided to export it for that we have created a new sales are 3000/13/20 for export,we cannot create the salesa are as 3000/13/19 due to some company issues,
Is there any way how I can use the material already in 3000/10/19 into new sales area 3000/13/20.
Will common distribution channel and division concept will be applicable here
As the material is same,and we donu2019t want to go for any more new material code. *
Thanks
Siddharth SharmaHi Sharma,
when a material is used in domestic and exports.....i hope it should be seggreagated based on dist chnl.......but not division.
because material is Division specific. it can be there in only one division. like mother child relation.
that is the reason why...... it is maintained inside BASIC DATA...... but not in input screen while creating material master.[unlike dist chnl]
because a material can be in multiple dist chnl....but not multiple division.
I feel only alternative is creating new material if you are already decided to devide the sales by division for domestic and foriegn.
Purpose of common dist chnl/div is to maintain pricing/condition in one common whenever you change master data.......
hope this gives you the clarity
regards
Satya.SCM
Maybe you are looking for
-
I have my iTunes library on my home PC, which is linked to my iPad 2 for music etc. I also have an iPhones 4S, which I would also like to pick up the music from my library, is this possible ?
-
SAP oil&gas - where to start - Any advice on manuals/guides
Hello Gurus I am new to Oil and gas and intend to pursue this segment for the future. I am an experienced computer professional (10+ years) I am fairly well versed with SAP-MM although experience is limited. I am keen to make a career in SAP Oil and
-
G/L account 200200( Asset account) cannot be used
Hi All, When i creating PO for Asset. i am getting error Error: G/L account 200200 cannot be used The gl account field selection is stored in table T004F: that for the account assingment is storred in table T162K Can some one help me Thank you Ramaka
-
Is there such a thing as a "silver iPod"?
Is there such a thing as a "silver iPod"? I've heard of the white and black versions, but a friend tells me there's a silver version available. Is she talking rubbish?
-
802.11r (Fast Transition) - multiple WLANs required for legacy clients?
Hello, I have a Cisco 5508 WLC with AIR-CAP3502E-E-K9 APs. I want to enable 802.11r (Fast Transition) and understand that some legacy clients may not support 802.11r and therefore if you select, for example, FT 802.1X as an authentication key manage