Ability to use external third party ETL tools removed?

Hi,
have just been looking the possibility of using a third party tool (Informatica, Business Objects Data Integrator) with NW2004s.
It appears that there is no longer a suitable source systyem type or at least there isn't in my Ramp Up system (SP7).
Does anyone know if the functionality required for this has been retired? Or is it still there behind the scenes and just needs to be used in a different way.
Many thanks,
Mike

Hi Andreas,
thanks for this.
It used to be that you needed an RFC destination from BW to the third party ETL RFC server, and a dedicated Source System for this and then the BAPI loader was used.
Not sure if I understand how this will be achieved with the 3.5x data sources as aren't these SAP only?
In the External Systems area of the source systems tab, there are some entries for:
RA 115     Oracle Applications 11i
LF 205     Tealeaf 2.05B
PD 020     SAP xPD
So it sounds like I create these as a SAP source system having previous done the RFC config?
Thanks for your help and a little more would be great!
Regards,
AB

Similar Messages

  • Deploying manually CC PKG file built with CC Packager. Not using any third party deployment tool. However after each 5 installations, the PKG files corrupt and cannot be use for a 6th installation. I have to build a new PKG file using CC packager.  Why ?

    Deploying manually CC PKG file built with CC Packager. Not using any third party deployment tool. However after each 5 installations, the PKG files corrupt and cannot be use for a 6th installation. I have to build a new PKG file using CC packager.  Why ?

    http://helpx.adobe.com/creative-cloud/packager.html
    http://forums.adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent

  • Business Objects Rapid Marts with third-party ETL tool

    Hi,
    I understand BO Rapid Marts are natively developed by BO Data Integrator. Can we use any other ETL tool in combination with BO Rapid Marts?

    Hi,
    the Rapid Marts are designed to work with the BusinessObjects Data Services.
    Ingo

  • Content Management using WLP Vs using a Third Party CM Tool

    Hi All,
    In our Application we have a Workflow which we earlier implemented using WLI and stored the Content in File System ( The Dis advantages with this is no versioning capability , hard to manage the Content etc..)
    Now we are plannning to use WLP's Content Management Capabilities.
    Does the Library Services support a workflow ?? Does Workflow Definitions conform to any standard ?? (Like BPEL etc)
    The Content we have is a set of forms ( XML Based) and are unique for each user Task . Might be using the goal technology to capture the data from the Users..
    I would like to know the pros and cons of using WLP Content Management Features vs Storing the Content in a Full fledged CM tool and accessing it from the Portlets Deployed.
    Features we are looking for are..
    Versioning , Search Capabilities , History info
    Thanks
    Sateesh

    How do I create plan.xml for every env Im not sure what you mean. Use vi/notepad if you want! See the section 'Using an Existing Deployment Plan to Configure an Application' in the link. You simply need to create this plan once with the value you want and you can use the same one with a different path value(the one you want to change) for each environment. Whether you want to create a template plan.xml whose value is replaced by an ant build is upto you.
    Plan.xml is similar to a WLST script, you'd only need to parameterise the actual value you want to use as the path(and you'd have to run both for every deployment) - Im not sure this value is accessible over WLST though..
    regards
    deepak

  • Third party reporting tools

    I am trying to use a third party reporting tools.
    I have found one I like from Inetsoft.
    The problem I am having is running the sample code they provide. I keep getting the error of method not found in my package.class file. They have provide sample.java files, I am not sure how to get jdev to see the method.
    here is the .java code:
    package smart_package;
    import inetsoft.sree.*;
    import inetsoft.report.*;
    public class SimpleReplet extends BasicReplet
    public ReportSheet createReport(RepletRequest req) {
    StyleSheet report = new StyleSheet();
    report.addText("This is a very simple Replet!");
    return report;
    here is the event code:
    <event name="print_report" >
    <method class="smart_package.SimpleReplet" method="createReport"/>
    </event>
    my question is why do I get this error:
    Warning(43,73): report.uix: Parsing error, line 43, column 73: Could not find method createReport in smart_package.SimpleReplet
    also if anyone has a suggest on a third party reporting tool let me know.
    thanks

    I think that I figured out my own problem. my problem was method not found in class.
    here is the solution:
    I need a method with a EventResult to start the process. and then that method would call the third party method.
    package smart_package;
    import java.util.*;
    import java.text.*;
    import java.io.*;
    import inetsoft.report.*;
    import inetsoft.report.io.*;
    import oracle.cabo.servlet.BajaContext;
    import oracle.cabo.servlet.Page;
    import oracle.cabo.servlet.event.EventResult;
    import oracle.cabo.servlet.event.PageEvent;
    public class PrintReport
    public PrintReport()
    // HERE IS THE KEY!!!
    public static EventResult StartPrint(BajaContext context,
    Page page,
    PageEvent event)
    createReport();
    return null;
    public static void createReport()
    try
    StyleSheet report = new StyleSheet();
    report.addText("This is a simple report");
    PreviewView previewer = Previewer.createPreviewer();
    previewer.print(report);
    previewer.pack();
    previewer.setVisible(true);
    previewer.setExitOnClose(true);
    catch(Exception ignore) {}
    my event on the uix page:
    <event name="print_report" >
    <ctrl:method class="smart_package.PrintReport" method="StartPrint" />
    </event>

  • Way to use Visual Web part in sharepoint 2010 without using/installing third party tools

    I want to know the way to use Visual Web part in sharepoint 2010 without using/installing third party tools.
    Please provide me a link where i can actually know how it is done.

    + to _eNo_,
    Visual Studio 2010 has support for visual webpart, you can find that under Visual C# node in the Installed Templates section (if your preferred language is C#)
    Hope this helps!
    Ram - SharePoint Architect
    Blog - SharePointDeveloper.in
    Please vote or mark your question answered, if my reply helps you

  • No of classes, Methods, Lines of codes, DLL's used and Third Party Libraries details identifying tools

    We have started a project to migrate 100+ Web Applications developed using legacy Microsoft technologies to latest .Net 4.5 Framework.
    The following are the planned migration approach
    Classic Asp à                                                   
    Asp.Net 1.1 Framework à Asp.Net 4.5 Framework
    Asp.Net 2.0, 3.5, 4.0 Framework à         Asp.Net 4.5 Framework (Direct Migration)
    Asp.Net 2.0, 3.5, 4.0 Framework à         Asp.Net 4.5 Framework (Application Rewrite
    using MVC/Entity Framework)
    VB 6 (COM/DCOM) à                                  
    C# .Net 4.5 (Web Services)
    We have to analyze 100+ applications to categorize them as Simple/Medium/Complex conversions for planning the timeline for completing the migration activities.
    Analysis includes identifying the following details - No of classes, Methods, Lines of codes, DLL’s used and Third Party Libraries  details
    for 100+ Microsoft applications.
    Could you please let me know do we have any effective tool to identify above mentioned details?

    This forum is for Microsoft Project Server, an EPM tool. You will need to find a more suitable forum for your question.
    Good Luck with the conversion!
    Rod Gill
    Author of the one and only Project VBA Book
    www.project-systems.co.nz

  • Best format to export in order to encode using a third party tool?

    Hello,
    I am trying to export a movie I cut. I want to have a high quality uncompressed file that I can transcode using a third party app (which I've had better luck with than AME). So far I have tried AVI's with 100 quality, no compression, RLE, and they look terrible. FIle size is not an issue at this point. Its a 3 minute clip that looks horrible and blocky and 2 gigs large. Sorry I am still learning premiere.

    Well I have been encoding clips for web since CS3. At the time I was trying
    to encode h.264 mp4's or quicktimes from premiere or from after effects.
    Perhaps I wasn't setting the encoding right but I was getting relatively
    larg files and or disappointing quality encodes. I then learned to export a
    quicktime with animation codec, at high quality, and transcode it using MPEG
    streamclip or Handbrake. They did a superb job and I had an easier time and
    a lot of control with the  h264 settings in these programs. It was just an
    extra step.
    Now that I am on CS5, its actually the first time I use Adobe Media Encoder.
    So perhaps it does a good job, and I just haven't figured it out yet. I am
    testing out some settings at the moment, trying to find a similar
    configuration from Handrake, to see how AME handles it, because if it works
    well it would be sweet.
    Oh and I realized that to export clean AVI I needed to use microsoft
    uncompressed AVI with uyuv. The other AVI settings looked horrible. Is that
    what people send to tape?
    Edit:
    I have taken and transcoded an uncompressed AVI clip at 720x480 using AME's h264 and then taken the same clip into Handbrake to compare results. It was hard to assign similar H264 quality settings as the options in AME are very basic. You can basically choose Variable bit rate or Constant bit rate, and then ascribe a target bit rate. And that seems to be about it. In handbrake, the codec settings are much more granular. So I set off to create an encode that would have the same file size. Here are my results:
    In AME I ended up with a 46 mb clip (it is over 3 minutes long) that looked pretty good. The render time was HALF of Handbrakes. With Handbrake, my clip was 45 mb, and it looked about the same as the AME clip, except that when there was a lot of fast movement on screen, the image quality was better, less blocky. While I really appreciate the speed from AME, the extra 2 minutes it took to transcode in Handbrake are worth the extra image quality and high end finish. It is hard to tweak the setting much more, in the absence of options inside of AME. Again, Handbrake is made to encode h264 from the ground up, and I also recognize that AME can be very useful in encoding other formats as well. Unless someone can show me otherwise, I think Handbrake will get you a better h264 encode than AME.

  • How to achieve Number Ranges in third party CRM tool and in SAP CRM

    Hello Guru's,
    My business requirement is I have to create LEAD from third party CRM tool to SAP CRM and vice versa i want to maintain number ranges for created lead in both side.
    How can I achieve this please provide me your valuable suggestions and document.
    Thank's In Advance

    Hi,
    In SAP IMG screen maintain the external number range in CRM  through the below path.
    CRM-Transactions-basic setting-Define Number range.
    Also maintain the same number range for lead in the third party crm.
    Regards,
    Ashish

  • EP integration with third party BI tools

    Hi,
    I was looking for information and pointers on EP integration with third party BI tools like Business Objects etc.  Would be grateful.
    Thanks,
    Madhu

    Thanks. We have a full fledged Business Objects reporting environment.  My question is:  As a beginner in the EP space, I would like to understand how to treat the  Business Objects environment as one of the content providers for the Enterprise Portal?  Are there any documents or manuals that talk about the integration of EP with Business Objects?  I know the question is too broad, but any pointers would be useful.

  • SAML Implementation for External third party portal

    Hi Experts
    I am trying to configure external third party portal to SAP Portal using SAML. Has anyone done that before?
    I would appreciate if someone can provide details of this kind of implementation as Idendity provider and destination is on their side and external partner has custom SAML implementation.
    Thank you
    JS

    Hi
    Has anyone has configured Source Site and Responder Service on Portal J2EE ?
    I would like to know if any one has done this kind of implementation and can share some light on the same.
    Thank you
    Jinal Shah

  • Oracle Third Party Backup tools

    What are some third party backup programs that people are using with oracle these days? Also when using third party backup tools, do these tools shutdown the database while backing up? Does the Archive Log mode need to be enable as well? Not big on Oracle so simple answers would work.
    thanks.

    I wouls suggest to go with RMAN. it's best tool and free.....Best third party backup tool is BMC SQL Backtrack.

  • Is it possible to use EBS as a ETL tool ?

    Is it possible to use EBS as a ETL tool ?

    Hi,
    Are you referring to "Extract, Transform, Load"? It is possible to download/upload the data from/to Oracle Apps and there are many APIs and tools (provided by Oracle or 3rd party) which should be helpful -- Please see these links for details:
    Oracle Integration Repository
    http://irep.oracle.com
    3rd Party/ISV Generic Installation Advice
    3rd Party/ISV Generic Installation Advice
    Note: 951604.1 - Implementing Oracle EBS Service on a Separate Instance
    However, you still need to use such tools with caution (make sure it is supported) as you do not want to end up with referential integrity issues and data corruption problems.
    Regards,
    Hussein

  • Third Party Ticketing Tool integration with solman service desk scenario

    Hi,
    I need any guidance on integration Of third Party ticketing tools like OVSD with the SAP Solution Manager Service Desk Scenario.
    Regards,
    Kaustubh.

    Hi Maheshwar,
    What I am trying to do is, try to maintain the data like,,
    Caller ID-- sender
    Assignment of workgroup--
    Search Code--
    Priority--
    and description--
    now some of these are constants that we need not determine every time.
    but my question is, can we maintain these as a set of parameters in the method definitionunder parameters tabjust similar to MAIL_HEADER...which is displayed in the mail alert.
    we already have a scenario maintained in the HPSD where it reads the mail picks up specific content based on key words, and creates a ticket.
    and If we can maintain these by modifying the method, then where can we maintain the multiple data/options for this
    And also please send me what were the steps u have done.
    U used a Z method or customized the Function module??
    Bcz in my case I think I will have to do both..
    Regards,
    Kaustubh.
    Edited by: kaustubh on Jun 19, 2008 6:32 PM

  • SOA Suite 11g calling external third party web service

    Hi All,
    Our SOA 11g application needs to communicate with an external third party web service (outside SOA composite and our 11g environment). Basically our SOA application will make a request based on date and the external web service will return a collection of data for that date.
    Please suggest how do I achieve this. What inputs will I need from the external third party. I am using SOA 11.1.1.4
    Thanks
    Edited by: user5108636 on 10/05/2011 19:11

    You will need the WSDL of the third party web service to be able to consume it. Based on the wsdl you can generate the request structure then invoke the service.
    Also do check with them if there is security associated with the webservice like HTTPS, any soap header that need to be passed, etc ....
    Based on this you will need additional configuration on your side.
    Thanks,
    Patrick

Maybe you are looking for