Ability to use the FFT and phase analyzer in Multitrack mode

This will be very convenient while recording and mixing. Also, in edit mode it would me much more flexible to have an effectsrack (like the masterrack now) with the ability to go to certain parts in your song with the chosen effects still worlking, instead of being dependant on an earlier determined selection and a play button. eg the same behaviour as in the multitrack mode.

You can use the search on the read only (normal mode) of the PL/SQL Editor. Either through menu or using ctrl F.
The other is still an enhancement and is being tracked.
Sue.

Similar Messages

My problem is a sudden loss of ability to get to PSE12 Organizer when I tried to load a saved scan. Had been using the Organizer and the Editor with no problems for several hours just before that.     Can not load the Organizer from the icon at the bottom

My problem is a sudden loss of ability to get to PSE12 Organizer when I tried to load a saved scan. Had been using the Organizer and the Editor with no problems for several hours just before that.
Can not load the Organizer from the icon at the bottom of Editor screen, from the icon on the MacBook Air dock (OS 10.10.2), nor from the file in applications located with Finder.
I have tried without success to access Organizer after turning off and on the scanner, turning off and on the computer, loading a fresh copy of PSE12 from the CD, and restoring default preferences. I have searched on line for other options but not found any.
Can you help me?

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Problems with obtaining actual results using the FFT VI.

I'm using the FFT express VI and graphing the results. My experiment involves decreasing the amplitude of a 100Hz acoustic pressure wave, ideally to zero, by phasing it with another signal of the same frequency and amplitude. According to other analysis I believe that the amplitude from the FFT of the signal is increasing and then decreasing. However, I am not able to visually see this in real-time on the graphical display.
The change in amplitude is happening quickly, every few ms. Is this timing to fast for the process to maintain proper resolution? Is there a way to make the output from the FFT more sensitive?
Thanks for the help.

The period of a 100 Hz signal is 10 ms. If your amplitude is changing every few ms, an FFT is not going to reflect this accurately. The FFT is basically defined for constant amplitude during the segment of signal being analyzed. The FFT also typically requires several cycles to give useful results. If it changes during this time, other techniques must be used to detect that. There is a large body of literature on time-frequency analysis dealing with this topic.
Lynn

EA1 - Ability to use Search option and code collapse/Expand option in ...

Noticed the following feature which was Scheduled for Release 1.5 is missing.
"Ability to use Search option and code collapse/Expand option in the Normal mode of PL-SQL Editor"
This feature could save a lot of time on code reading/review/....
Thanks,
K.Nataraja Suthan,

You can use the search on the read only (normal mode) of the PL/SQL Editor. Either through menu or using ctrl F.
The other is still an enhancement and is being tracked.
Sue.

Ability to use u0093Globalu0094 queries, and modify/save them u0093Locallyu0094

Hi,
I have one requirement of Creating Role with RRMX Tcode, to Ability to use Global queries, and modify/save them Locally for their own use. Ability to Create & Modify Local queries for their own use.
I have tried with all combination but still not able
to save any query(global or local) as local queries by using the option "change query(Local view)",Where as if we do changes in the global queries default its getting saved under global only.
We are unable to restrict only for Local changes.
Let me know in the object name and what value need to add there.
Regards,
Deepak

Hi Bhanu,
I have tried to find the option for the local and Glabal, but did not got any thing. May be my functional consulatant can find out.
Can you please let me know the exact object name and the value, i have mainatined Object S_RS_COMP and S_RS_COMP1 and the value 01,02,03,16.
Rgds,
Deepak

Why have I lost the ability to use the Background Brush in Low Key in my Photoshop Elements 11 Program??? Need this fixed!!!

Why have I lost the ability to use the Background Brush in Low Key in my Photoshop Elements 11 Program????? I need this fixed, can anyone help me???

I'd try resetting the pse 11 preferences.
In the pse 11 editor Adobe Photoshop Elements Editor (Edit)>Preferences>General, click on Reset Preferences on Next launch
and then restart the pse 11 editor.

[svn] 3520: Add ability to use the FP10 unloadAndStop() method in SWFLoader .

Revision: 3520
Author: [email protected]
Date: 2008-10-08 10:26:39 -0700 (Wed, 08 Oct 2008)
Log Message:
Add ability to use the FP10 unloadAndStop() method in SWFLoader.
An application needs to be compiled with the "-target-player=10" argument to allow SWFLoader's unloadAndStop() function to use the Flash Player's unloadAndStop() function. If the argument is not provided then the Flash Player unload() function will be called instead.
QE: YES
Doc: YES
Checkintests: YES
Reviewer: Ely, Deepa
Bugs: SDK-16764
SWFLoader.as
Added new public method unloadAndStop().
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-16764
Modified Paths:
flex/sdk/branches/3.0.x/frameworks/projects/framework/src/mx/controls/SWFLoader.as

Thank you for your replies.
I have been looking into it as well and seem to have found quite a simple solution...
First you need to create an instance of a UIScrollView in the .h file:
IBOutlet UIScrollView *scrollView;
Then in the .m file, add the following line of code in the viewDidLoad method:
scrollView.contentSize = CGSizeMake(320, 700);
Then in IB all you need to do is set the files owner to the controller file we have set up above, drag a new instance of UIScrollView to the window. Then set two of its referencing objects to the File's Owner (view and the scrollView we have defined).
You can then add as many labels etc to the scroll view by dragging in IB. Load it all up and the view scrolls perfectly and displays all labels!
Thanks for helping me look into this.

I have bought an used Iphone 5. I dont have the password for the existing login id of the old owner. How do i use the phone and change the log in id?

I have bought an used Iphone 5. I dont have the password for the existing login id of the old owner. How do i use the phone and change the log in id?

Unfortunatly the only way that you can get it off is to get the old user to input the password. You may need to contact that old user and see if he can put the old password in. hope this helps.

I am new to iMovies. When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch. Very annoying. How can I fix this?

I am new to iMovies. When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch. Very annoying. How can I fix this?

DVD drives read the bottom of the disk, not the top. Smooth out the paper & try again.

I have an iphone 4, i connect it to my laptop using the usb and then when connecting to itunes it says my phone is not up to date with itunes yet i cannot find an update 11.1 for my phones itunes? someone please help me.. kind regards

i have an iphone 4, i connect it to my laptop using the usb and then when connecting to itunes it says my phone is not up to date with itunes yet i cannot find an update 11.1 for my phones itunes? someone please help me.. kind regards

Itunes 11.1 is for your computer, not your iphone
It is required in order to sync with ios 7.

The application does not use the screen and run in the background

Hi
I have downloaded a package of j2me Midlet
from [link] here [link]
and try to reuse the code
but I get the following error when running the code:-
The application does not use the screen and run in the background
I think the error into one of these two classes
package main;
import javax.microedition.midlet.*;
import javax.microedition.midlet.*;
import javax.microedition.lcdui.*;
import javax.microedition.media.Manager;
import javax.microedition.media.MediaException;
import javax.microedition.media.Player;
import java.io.IOException;
import java.io.InputStream;
public class MainMidlet extends MIDlet implements CommandListener {
    private SSGameCanvas gameCanvas ;
    private Command exitCommand ;
    private Player player = null;
    public void startApp() {
try {
       //   create new game thread
          gameCanvas = new SSGameCanvas();
          gameCanvas.start(); // start game thread
          exitCommand = new Command("Exit",Command.EXIT,1);
          gameCanvas.addCommand(exitCommand);
          gameCanvas.setCommandListener(this);
            Display.getDisplay(this).setCurrent(gameCanvas);
   catch (java.io.IOException e)
            e.printStackTrace();
        try {
            // start sounds
            InputStream in = getClass().getResourceAsStream("/resource/startfly.wav");
            player = Manager.createPlayer(in,"audio/x-wav");
            player.setLoopCount(1);
            player.start();
        catch (MediaException ex)
            ex.printStackTrace();
         catch (IOException ex)
            ex.printStackTrace();
    public void pauseApp() {
    public void destroyApp(boolean unconditional) {
        if (player != null) {
            player.close();
        System.gc();
public void commandAction(Command command, Displayable displayable) {
       if (command == exitCommand)
             destroyApp(true);
             notifyDestroyed();
package main;
import java.io.IOException;
import javax.microedition.lcdui.*;
import javax.microedition.lcdui.game.*;
public class SSGameCanvas extends GameCanvas implements Runnable {
    protected GameManager gameManager;
    protected boolean running;
    private int tick=0;
    private static int WIDTH;
    private static int HEIGHT;
    private int mDelay = 20;
    Form mainForm;
    Display display;
    //private int MaxTime;
    public SSGameCanvas() throws IOException{
        super(true);
        gameManager = new GameManager(5,5,getHeight()-10,getWidth()-10,this);
    public void start() {
            this.running = true;
            Thread t = new Thread(this);
            t.start();
    public void stop() {
        running = false;
    public void render(Graphics g) {
        WIDTH = getWidth();
        HEIGHT = getHeight();
        // Clear the Canvas.
        g.setColor(0, 0, 50);
        g.fillRect(0,0,WIDTH-1,HEIGHT-1);
        // draw border
        g.setColor(200,0,0);
        g.drawRect(0,0,WIDTH-1,HEIGHT-1);
        // draw game canvas
        gameManager.paint(g);
    public void run() {
        while (running) {
            // draw graphics
            render(getGraphics());
            // advance to next graphics
            advance(tick++);
            // display
            flushGraphics();
            try { Thread.sleep(mDelay); }
            catch (InterruptedException ie) {}
    public void advance(int ticks) {
        // advance to next game canvas
        gameManager.advance(ticks);
        this.paint(getGraphics());
}Edited by: VANPERSIE on Jul 10, 2012 12:26 PM

Hi Andi,
Thanks for your reply.
Yes, I have waited for a while and the result doesn't change.
The Porblem here is the application is seen started in visual administrator.Only restart brings up the page back.
Can you please suggest anything.
Thanks and regards
Nagaraj

How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?

With Acrobat 6.0 I was able to copy a stamp in the same position (I mean "exactly" the same one) of different pages just by using the "copy/past" tool.
Now I am using Acrobat XI and it seems like it is not possible anymore: I am copying a stamp and I am trying to past it in anoter page, but it appears in the center of the page (or wherever it wants to...).
Does anyone have a solution?
Thanks in advance.

Thank you very much. I'll be waiting for you message.
Messaggio originale----
Da: [email protected]
Data: 26/01/2015 17.56
A: "Umberto Gangi"<[email protected]>
Ogg: How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
    How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
    created by Gilad D (try67) in Creating, Editing & Exporting PDFs - View the full discussion
Well, I was in the same situation so I've developed a tool that allows one to do it. I will send you some additional information about it in a private message.
     If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7132586#7132586 and clicking ‘Correct’ below the answer
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7132586#7132586
     To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
     Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

My MacBook Pro is running very slow when using the internet and sometimes gives the pinwheel of death, any suggestions on how to fix?

My MacBook Pro is running very slow when using the internet and sometimes gives the pinwheel of death, any suggestions on how to fix?

<http://www.thexlab.com/faqs/sbbod.html>

How do I use the counter and digital signals of the 6071E while it is connected to SCXI modules?

I am contemplating using a PCI 6071E with SCXI. We have the boards (6071E), we would need the cable (I suppose SH1006868) and the SCXI system. I would like to know how would you access the counter and digital line capabilities of the board. I will be using a SCXI-1314 with a SCXI-1520 Module for strain measurements but will need to use the counter and digital lines of the board as well. Can this be done? If so, how and/or what else do I need?

I think this KnowledgeBase will answer the question for you.
Accessing DAQ Board Counter Pins with an SCXI System
Otis
Training and Certification
Product Support Engineer
National Instruments

I have an iphone 4. I disconnected it from my iTunes account but I am still using the iphone and the Apple ID. If I make a purchase will it work? Also, how can I reconnect my iphone to my Apple ID?

I have an iphone 4.
I disconnected it from my iTunes account but I am still using the iphone and the Apple ID.
If I make a purchase will it work?
Also, how can I reconnect my iphone to my Apple ID?

Do you mean that you removed the phone from the 'manage devices' section of your iTunes account ? If you do then that won't stop you being able to purchase items on your phone - you only need to be logged into an account to be able to purchase with it.
If you do mean the 'manage devices' section then you can associate, or re-associate, a device (or computer) by using iTunes Match, or automatic downloads, or redownloading past purchases on it : http://support.apple.com/kb/HT4627

Ability to use the FFT and phase analyzer in Multitrack mode

Similar Messages

Maybe you are looking for