Able to connect the visual studio 2010 to Remote SharePoint 2010 server?

Able to connect the visual studio 2010 to Remote SharePoint 2010 server?
l
I researched the result value is null,
They asking to try in another method like
SharePoint Redistributable,
SharePoint SDK.
Any possible ways to connect the remote SharePoint2010 server with the local system.

hi,
try to see these links :
http://platinumdogs.me/2014/01/14/remote-sharepoint-site-connections-not-supported-using-visual-studio-2013-and-host-named-site-collections/
http://blogs.msdn.com/b/kvosters/archive/2013/03/27/sharepoint-2013-cannot-connect-to-the-targeted-site.aspx
if you try these and they didn't work so you can't :(
HOPE IT HELPS

Similar Messages

The Visual Studio 2013 setup wizard said "Setup failed" many times when I UNINSTALL it.

I hope somebody can help me... Sorry for my bad English.
I had Visual Studio 2013 installed about two years ago. But I don't need it now and I want to uninstall it. However, the setup wizard said "Setup failed" after I clicked "uninstall" for a while. And it said:
Microsoft Visual Studio 2013
Fatal error during installation.
Microsoft Advertising SDK for Windows Phone - ENU
Package failed.
Microsoft Visual C++ 2012 Compilers For Windows Phone - ENU Resources
Package failed.
Microsoft Visual C++ 2012 Core Libraries For Windows Phone
Package failed.
Microsoft Visual C++ 2012 Compilers For Windows Phone
Package failed.
Workflow Manager Tools 1.0 for Visual Studio
Package failed.
Windows 8 Development Essentials
Package failed.
LocalESPCui for en-us
Package failed.
LocalESPC
Package failed.
I have tried repair it, but it said:
Visual Studio Core Features - ENU
Fatal error during installation.
After repair, I clicked "uninstall" and it tipped me the same error.
Thanks very much.

Hello Sakura Chino,
The Visual Studio installation will leave some components on your OS for repair/uninstall. The problem seems related to this. If you can find the installer which you used to install Visual Studio 2013, then please use it to repair and uninstall. It
will fix problems on your OS so please don't try to uninstall from control panel.
If you cannot find the source installer, please download the same version of Visual Studio 2013 ISO from here:
https://www.visualstudio.com/en-us/downloads/download-visual-studio-vs.aspx
Then verify it's hash value by refer to the following page:
https://www.visualstudio.com/en-us/downloads/visual-studio-2013-iso-sha1-vs
After that, you can use that installer to repair then uninstall.
If you still meet any problem, please use the following tool to fix:
https://support.microsoft.com/en-us/mats/program_install_and_uninstall
It is for Visual Studio 2010 or previous versoin, but some customers fixed problems by using this tool. I think you can also have a try on it.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I am not able to connect the workspace

Hi all,
i have installed the Hyperion fusion version 11.1.1.3 in my local machine,i am able to connect the essbase and planning and i have no issues with that,my problem is while opening workspace i got the error like the make sure the reporting and analysis server is up a that time i restarted the service workspace web service and again i am trying to get access the workspace i am getting there was a communication error
some times the workspace will opens perfectly i dont what i am doing wrong and
i want to know the correct order of services Stop and Start for 1) essbase and planning
2)Reporting and Analysis
could you please help me on this.
Appreciate your help.
Thanks
Ravi

Hi,
If you don't have a service for workspace agent then it looks like it might not have deployed/configured correctly, is this 64 bit or 32bit ?
Is it possible to create the agent service but it is only to be used if you know the configuration/deployment was successful.
From command line you can run
C:\Hyperion\common\workspacert\9.5.0.0\bin\wksagent.exe -RegService -Auto -Name HyS9Core1 -DisplayName Hyperion Workspace - Agent Service -Description HyS9Core1, Provides service infrastructure to run services locally
Cheers
John
http://john-goodwin.blogspot.com/

The visual Studio Test controller service on local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs

We are using VS2013 Premium. i have installed vs2013 Test controller in my dev environment. While i am configuring (https://msdn.microsoft.com/en-us/library/hh546459.aspx) getting error message in
the Configuration summary dialog box displaying following error's : 1. Failed to Configure TFS Team Project Collection, 2. Could not complete operation as the time out expired. ''
I have checked the "visual Studio Test controller " in the
Services --> Administrative. Its automatically stopped the service. When i started the manually its showing message like as 'The visual Studio Test controller
service on local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs'
Please guide me how to resolve this problem.
Thanks in Advance...

Hi Divakar,
What’s the version of your TFS?
How do you configure the test control?
Please make sure you are specify the team collection instead of team project.
On the other hand, you may enable test controller logs. (You could share the log file on the OneDrive)
# How to enable test controller logs
http://blogs.msdn.com/b/aseemb/archive/2009/11/28/how-to-enable-test-controller-logs.aspx
Regards
Starain
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Not able to connect the application.

Hi DBA's
PLease help me to resolve this issue, I am not able to connect the application.
Actually i changed apps user before becuase of some reasons, now i changed as old to APPLSYS,APPS,APPLSYSPUB by following note.160337.1
Now i am not able to open the application it is saying invalid username and password before it load the application.
Kindly help me..
Best Regards

Hi Sawwan,
After giving bellow commands, it was given error that invalid applsys user name provided.
FNDCPASS apps/apps 0 Y system/clone SYSTEM APPLSYSPUB APPS
Application Object Library: Version : 11.5.0 - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
module:
Current system time is 21-JAN-2009 17:01:30
APP-FND-02700: Invalid APPLSYS user name provided.
Concurrent request completed
Current system time is 21-JAN-2009 17:01:30
Best Regards,

Will Ipad purchased in singapore work in India? Especially the charger? I am not able to connect the charger

Will Ipad purchased in singapore work in India? Especially the charger? I am not able to connect the charger. I have the new ipad 16GB wifi +4G.I have not yet inserted the SIM.
Will it work in 2 respects:
1.charger
2.cellular compatibility

The charger works from 50-60HZ, 100-240V AC power.
 Cheers, Tom

While i am creating my business rule i am not able to connect the planning

while i am creating my business rule i am not able to connect the planning application and database?I dont know what is the reason?

Make sure you log into the planning application before logging into EAS.
Cheers
John
http://john-goodwin.blogspot.com/

Configuration check error: The SMD Agent is not able to connect the Satellite System (J2EE stack)

Hi friends,
Getting the below error in step 10 (configuration check) in managed system configuration.
The SMD Agent is not able to connect the Satellite System (J2EE stack).
Please check the JAVA Connect Parameters provided in the Managed System Setup Wizard for this
System.
java.rmi.RemoteException.P4 Connection failed -
P4AuthorizationException -
com.sap.smdagent.plugins.connectors.p4.exceptions.P4AuthorizationException:
Access is denied to SAP System sid [XYZ/null]: check the connection
credentials.More details about the error in agent 'xyz' log file
(SMDAgentApplication.X.log).; nested exception is:
com.sap.engine.services.security.exceptions.BaseLoginException: Cannot
authenticate the user.
The SMD log file referred to in the log above gives the same information and not anything much useful.
Any idea what could be the reason for the above error?
Thanks,
Arindam

Hi All,
Thaks for your suggestions. I chcked the note 182020, but the issue described in the note is for error byte code adapter installation whcih is not my case. The byte cde adapter intallation has been successful in our solman system All the steps from 1 to 9 are green. Only in step 10, check cniguration I am getting the above error.
The logon test wth the user id in step 3 "Enter system parameters" is successful. The message server port is also correct.
Hi Khaja,
I went to the links as suggestedby you but there its about a ifferent error message "Invalid Response Code: (401) Unauthorized.". I am not getting any such kind of error.
All I am getting is this -
The SMD Agent is not able to connect the Satellite System (J2EE stack).
Please check the JAVA Connect Parameters provided in the Managed System Setup Wizard for this System.
java.rmi.RemoteException.P4 Connection failed -
P4AuthorizationException -
com.sap.smdagent.plugins.connectors.p4.exceptions.P4AuthorizationException:
Access is denied to SAP System sid [XYZ/null]: check the connection
credentials.More details about the error in agent 'xyz' log file
(SMDAgentApplication.X.log).; nested exception is:
com.sap.engine.services.security.exceptions.BaseLoginException: Cannot
authenticate the user.
Thanks,
Arindam

When i install measurement studio it causes the visual studio crash at start up

when i install measurement studio it causes the visual studio crash at start up .it is unusual. the information about it say the problem is clr.dll what is that ? how can i solve that?the problem is shown in attached file
Attachments:
Untitled.png ‏193 KB

hi -thank you.the version i use is 2012-my system windows is win7 service pack1-32 bit- after this problem apeared i uninstalled the measurement studio and i examined the visual studio came up succesfully . in the error log i saw clr.dll that might have problem but the problem that is always first tim say is: an unhandeled microsoft .net framework exception occured in devenv.exe [5144].but the number in [] each time . it is really unsual
Attachments:
Untitled2.png ‏223 KB

Couldn't close the visual studio.

Hi,
My requirement is to open a internal browser in my application. My application is a plugin to a visual studio, which looks similar like VS.
I have the following code, which works perfect.
dispatcher.BeginInvoke((System.Threading.ThreadStart)delegate()
IVsWebBrowsingService browser =
this.viewModel.Service.GetService<SVsWebBrowsingService,
IVsWebBrowsingService>();
IVsWindowFrame frame =
null;
int hr = browser.Navigate(Path.GetFullPath(this.viewModel.ReportSetting.OutputFileName),
0, out frame);
System.Diagnostics.Debug.Assert(hr ==
VSConstants.S_OK,
"Navigate did not return S_OK.");
//this.viewModel.ReportSetting.OutputFileName = "C:\Outputfile.xml"
All works fine, problem here is when i try to close the Visual studio(My application), i am getting a pop up window saying
"Microsoft Visual Studio has detected that
an operation is blocking user input. This can be caused by an active modal dialog or task that needs to block user interaction. Would you like to shut down anyway?"
Could you please let me know what could be cause for this issue.
Thanks in advance.

Hi puni_vidhya,
>>"Microsoft
Visual Studio has detected that an operation is blocking user input. This can be caused by an active modal dialog or task that needs to block user interaction. Would you like to shut down anyway?"
According to the exception message, to check if the issue is related to the plugin impact the Visual Studio close, so I suggest you could try to
run devenv.exe /safemode in command line and then try to close the VS again to check this issue.
https://msdn.microsoft.com/en-us/library/ms241278.aspx?f=255&MSPPError=-2147217396
(1) If you did not get same issue, I doubt that the issue is related to the plugin, so I suggest you disable Add-ins (e.g. “Tools” | “Add-in Manager”) and then check this issue again.
(2) If you get same issue, I suggest you could try to create a simple project and then close the VS check if all type projects have same issue.
(a) If all the error have same issue, maybe you will need to repair or re-install the VS and then check this issue.
(b) If the issue just occurs in the specified application, I assume that the issue may be related to your application itself issue. So please you debug your application to check this issue again.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Integrating crystal report into the visual studio standard edition IDE

I have visual studio 2005 standard edition. I need to upgrade some asp.net reports that were done using visual studio 2003.
I have just install Crystal Reports XI developer edition version 11.0.0.1282. How can I integrate Crystal into the Visual Studio 2005 IDE?

Hi
I would like to inform you that VS 2005 is only compatible with CR XI R2 and CR 2008.
Have look in supported platform guide:
https://websmp105.sap-ag.de/bosap-support
You need to upgrade CRXI to CRXIR2 then try to solve this issue.
To download the CR XI R2 follow the instructions given below:-
Crystal Reports XI is installed on your computer. You need to manually uninstall Crystal Reports XI for one of the following reasons:
u2022 To verify that all Crystal Reports XI components have been completely removed prior to installing a later version of Crystal Reports.
u2022 To remove the remaining Crystal Reports XI components that have not been removed using the 'Add/Remove Programs' command (Start > Settings > Control Panel).
u2022 To remove the remaining Crystal Reports XI components that have not been removed using the Setup.exe file from Crystal Reports XI installation CD.
How do you manually uninstall Crystal Reports XI?
Resolution
Before getting started, uninstall Crystal Reports XI by launching the Setup.exe file from the installation CD or by using the 'Add/Remove Programs' command. If either of these methods fails to remove all Crystal Reports directories, files and registry keys, then continue with the resolution of this article.
==========
WARNING:
This resolution can be applied if Crystal Reports XI is the only software installed on the computer that uses the Business Objects directories, files and registry keys.
For example, Crystal Analysis, Crystal Enterprise and BusinessObjects Enterprise XI are applications that may share the same directories, files and registry keys.
Removing these directories, files and registry keys may cause other software to function incorrectly.
==========
1. To manually uninstall Crystal Reports XI, delete the following directories:
u2022 C:\Program Files\Common Files\Business Objects\3.0
u2022 C:\Program Files\Business Objects
====================
NOTE:
Do not remove the directory C:\Program Files\Common Files\Business Objects\3.0 if you have BusinessObjects Enterprise XI or Crystal Reports Server XI installed. These files are shared by both applications and removal of these files will cause Business ObjectsEnterprise XI and Crystal Reports Server XI to function incorrectly.
====================
2. Delete the following registry keys:
====================
WARNING:
The following resolution involves editing the registry. Using the Registry Editor incorrectly can cause serious problems that may require you to reinstall the Microsoft Windows operating system. Use the Registry Editor at your own risk.
HELP:
For information on how to edit the registry key, view the 'Changing Keys And Values' online Help topic in the Registry Editor (Regedit.exe).
RECOMMENDATION:
It is strongly recommended that you make a backup copy of the registry files (System.dat and User.dat on Win9x computers) before you edit the registry.
====================
u2022 HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects
u2022 HKEY_CURRENT_USER\Software\Business Objects
u2022 HKEY_USERS\S-#-#-##-...-####\Software\Business Objects
(The number signs (#) represent a series of numbers that are different on each computer.)
====================
NOTE:
After making changes to the registry, restart the affected service or application as required.
After deleting the CR XI from the system install the CR XI R2 full build and provide the same key as you provided in CR XI.
URL to download CR XI R2 is: - http://resources.businessobjects.com/support/additional_downloads/service_packs/crystal_reports_en.asp#CRXIR2
Click on
Service Pack 2 - Full build - ZIP - 1.03 GB - released April 2007
I would suggest to use the latest service pack of CR XI R2 i.e. Service Pack 4.
to download SP4 click [here|http://resources.businessobjects.com/support/additional_downloads/service_packs/crystal_reports_en.asp#CRXIR2].
Note:- before installing SP4 - you must have installed CR XI R2 SP2
Hope this helps!!
Regards,

Can we change the name of reassign button in sharepoint 2010 approval workflow?

can we change the name of reassign button in sharepoint 2010 approval workflow?
Shazil Ali

Yes, we can change it. Steps are as follows: 1. Create the workflow in SharePoint Designer 2010 2. Use Start Approval Process action 3. Write your logic and all setting as per you requirement and then publish the workflow once. 4. After this, click on
the workflow name and there you will see the sections as Workflow Information, Customization, Settings, Start Options, Forms. Here you will see a form under Forms section with a name of Approval_x00....... with a type "Task". Click on this form. This form
is an Infopath form that opens up when a task is to be edited (Task Form). This form will open up in Infopath (provided you have Infopath installed on your system) It may ask you the crendentials for security. 5. The task form will open up in Infopath for
editing. Click on the Reasign button and in the top left corner in the ribbon section is the field (Label) having text as "Reassign Task". Change this and then save and publish the form.Publish the workflow once again.

Can't connect to visual studio online source control from vs 2010 ice starting today 1-23-2015

apparently there has been a breaking change and I can no longer connect to my visual studio online account anymore through vs 2010 ice - i get this message when i try to connect to it in the ide
Microsoft Visual Studio
Error
Team Foundation Server https://xxxxx.visualstudio.com/defaultcollection does not exist or is not accessible at this time.
Technical information (for administrator):
TF30064: You are not authorized to access the server.
OK
I can log in manually with a web browser but I need to check in items from the ide - it worked this morning but stopped working this afternoon
when i try to debug the webpage that comes up in ide to connect it says line 4 char 16405 error object doesn't support this property or method - code
0 url https://apps.vssps.visualstudio.com/_status/tfs/20150123T002517/_scripts/TFS/Laoder.min.js do you want to continue running scripts on this page?

Hi diakoniaus,
For the situation, you can check if you have the need permissions to access the team project in Visual Studio Online.
To make sure the permission of your credential, we can run tfssecurity command in VS command line to have a check. Please execute
tfssecurity /imx “MS account” /collection:url, for more information about tfssecurity /imx, please refer to:
http://msdn.microsoft.com/en-us/library/ms400806.aspx
If you have the corresponding, you can also have a try on other machines to see if it works for you. Or you can clean team foundation cache, delete cookies in browser and delete the credentials that saved in credential manager. Then reconnect to the team
project via VS 2010. You can check the troubleshooting details in this
thread.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Connect from visual studio 2005 from PC 1 to Oracle database from PC 2.help

hi every body
i am new in oracle database projects
i have installed oracle 11g enterprise on my laptop
and i have visual studio 2005 on my desktop computer
and i want to connect to oracle database on my laptop from desktop through my network
what additional tools should i have on my laptop and desktop to make application in visual studio 2005 and how to make the connection?
thanks in advancebye

You would need to install an Oracle Database Client on your desktop computer, to get the windows interfaces, oci, connectivity software and other support files to be able to "talk" with the database server (on your laptop).
Download from the usual place
http://www.oracle.com/technology/software/products/database/index.html
or the Instant Client
http://www.oracle.com/technology/software/tech/oci/instantclient/index.html
I don't know about Visual Studio - you need to check certification with the product and also be sure to follow the requirements in the Installation Guide for the release and platform that you choose.
http://www.oracle.com/technology/documentation/index.html
There are plenty of application Developer's guides, some of which you might want to study closer:
http://www.oracle.com/pls/db102/portal.portal_db?selected=9

SQL Server Database Connectivity with Visual Studio 2012 - Help Needed

Hello,
I am having Visual Studio 2012 and SQL Developer 4.0 installed on my system with Windows 8 - 64bit
I want to shift a VS project with an SQL database connectivity to another new Laptop (above mentioned) ...
I have the project opened in VS without bieng connected to the database..
I have a backup file of the database (which needs to be restored to a new created database on SQL Developer)
The problem:
I am unable to create a server connection in SQL Developer which will allow me to create a new database followed by the recovery from backup file.
I am getting the following error message when I try to create a connection:
Status: Faliure - IO error: The network adapter could not establish a connection
Please help me in setting up a server connection and adding a new sql database

The error message seemed unfamiliar to me and since I had never heard of SQL Developer before, I went to Google. Google might be pulling my legs, but it appears that SQL Developer is related to Oracle. This forum is devoted to SQL Server, so you are in the
wrong place.
Try finding a forum for SQL Developer.
Erland Sommarskog, SQL Server MVP, [email protected]

Able to connect the visual studio 2010 to Remote SharePoint 2010 server?

Similar Messages

Maybe you are looking for