Able to delete delivery even TO is exist and confirmed

Hi folks,
I could able to delete the delivery even after the TO is created and confirmed. As per the functionality if a outbound TO is confirmed that means that the goods are in interim storage type 916. At this point we could able to delete the outbound delivery. It seems this is standard process. Is there any option or user exits to stop this?
You will be rewarded on usefull answers.
Thanks in advance.

>
RathiM wrote:
> Hi folks,
>
> I could able to delete the delivery even after the TO is created and confirmed. As per the functionality if a outbound TO is confirmed that means that the goods are in interim storage type 916. At this point we could able to delete the outbound delivery. It seems this is standard process. Is there any option or user exits to stop this?
>
> You will be rewarded on usefull answers.
>
> Thanks in advance.
You could use system genarated packing once t.o. is confirmed.
delivery deletion is not allowed if the delivery contains handling units
or
add deliveries to shipments before they are picked (delivery deletion is not allowed when delivery is contained in shipment)
I think it truely is an issue of training and authorization.
A well trained person should not delete a delivery in error and a person not trained should not have authorization.
hope that helps

Similar Messages

  • Possible to delete delivery even though Transfer Order exists

    Dear Experts
    I am able to delete deliveries even though Transfer order exists and confirmed. How can I restrict this as in this Transfer Order remains open without delivery in Place.
    Regards,
    Neeraj Srivatava

    Hi Frenchy
    Many thanks for your valuable inputs.
    What is the reason I can delete delivery even after Transfer Order is confirmed. This will leave the Picked  stock stranded in Dispatch area which cannot be linked with any delivery.
    Regards,
    Edited by: NEERAJ SRIVASTAVA on Aug 13, 2008 2:42 PM

  • HT4914 I would like to know if after subscribing to ITunes Match I will be able to delete my library from my PC and, by these means, liberating the disk space currently used by my music

    I would like to know if after subscribing to ITunes Match I will be able to delete my library from my PC and, by these means, liberating the disk space currently used by my music

    Your purchased music is availble for download again at no cost.  If you have iTunes match service, you can download your matched music.

  • I want to b able to delete from my recent call list and set certain contacts to no ring, when is that software update coming?

    I want to b able to delete from my recent call list and set certain contacts to no ring, when is that software update coming?

    Can you not now set a silent ringtone for an individual contact? I can by opening the contact and changing the ringtone. Only prerequisite is to download or make a silent ringtone (Google should provide any information you need) and sync it to your iPhone.

  • Hi..i use to able able to delete the apps inside my pc and when I sync to 2 of my iPads, the apps are gone in the iPad. Now after deleting from the pc, the apps still appear in both the iPads. Please assist. Thanks

    hi..i use to able able to delete the apps inside my pc and when I sync to 2 of my iPads, the apps are gone in the iPad. Now after deleting from the pc, the apps still appear in both the iPads. Please assist. Thanks

    Here you are "the strange draft logos"...

  • ECC 6. was able to delete records even though it has dependent records ....

    Hi Guyz,
      Was able to delete entries from master table even though I have entries in detail table. I defined foreign key in detail table field refering to master table field. I am working on ECC6.0. Does any body got same problem ?
    Regards,
    Venkat.

    You have a master table : For eg: Code Type
    with some values
    like
    Fields:CODE_TYPE(Primary key *)                CODE_DESC
              ENCL                                      Enclosure
              NACO                                      Nature of concern
              PORT                                      Port code
    Another detail table with
    Fields:
    CODTYP(#)  CODE ()      CODDESC  
    ENCL           2             Insurance Certificate
    ENCL           3            Quality Certificate
    ENCL           4            SAARC Preferential Trade Agreement
    Fields CODTYP also has foreign key(#) reference
    to first table Code type(Check table)
    You deleted CODE_TYPE: ENCL from the first table:  Code Type
    The system will allow this type of deletion.
    But when you try to add a new entry with codtyp = 'ENCL'
    Next time it will raise error message saying that value doesnot exit in check table.
    If you want to have a check whether its used in details table at master table entry deletion time, you may have to write some extra form in deletion event in TMG.

  • I used to be able to delete e mail on my PC and they would be removes from my Iphone and Ipad.  Now I must delete them separately on all 3 devices.  How can I fix this?

    I used to be able to delete email on my PC and they would be removed from my Iphone and Ipad.  Now I must delete them separately on all 3 devices.  How can I fix this?

    https://discussions.apple.com/message/17410477#17410477

  • Not able to activate Java even after clicking "allow and remember"

    Hi,
    After opening a website in Mozilla Firefox it shows "Activate Java(TM) Platform SE 7 U. This plugin has security vulnerabilities" and after clicking "allow and remember in red plugin icon in the address bar" the website closes automatically. Again after opening the same website the same problem exists - Not able to activate java.
    After opening the same website in Google Chrome "Java(TM) Platform SE 7 U21 has crashed." - this message appears.
    Please and Kindly help me solving this problem so that Im able to open the website.
    Thanks & Regards,
    Akansha.

    You appear to have a very old version of Java installed - '''''Next Generation Java Plug-in 10.21.2 for Mozilla browsers '''''. It is shown in the Plugins submitted with your original question (click ''Question Details > More System Details'' to the right of your original question). That is Java 7u21, the current version is Java 7u45.
    *All Java 7 updates (versions) prior to u45 have been blocked due to security issues - https://addons.mozilla.org/en-US/firefox/blocked/p458
    *You can scroll down or use Find (Ctrl+F) to find Java versions that have been blocked on this list - https://addons.mozilla.org/en-US/firefox/blocked/
    There are several methods to update Java. I recommend that you update by either 1 or 2 below:
    #download, SAVE to your hard drive, close all browsers, run the updater, uncheck items that you do not want installed (if offered), then open Firefox and test.
    #*Download link - http://www.oracle.com/technetwork/java/javase/downloads/index.html '''''(scroll down a bit and download the '''''JRE''''' version in the 3rd column)'''''
    #*Test Java - https://www.java.com/en/download/installed.jsp
    #You can also update using Windows Control Panel > Update
    Your are also 2 full revisions behind on Shockwave Flash 11 (aka, Flash or Flashplayer). You System Details with you question indicate that you are using Shockwave Flash 11.7 r700 ### which contains security issues; current version is Shockwave Flash 11.9.900.152.
    *Read and follow the instruction in these articles to update Flash
    **https://support.mozilla.org/en-US/kb/keep-flash-up-to-date-and-troubleshoot-problems
    **https://support.mozilla.org/en-US/kb/install-flash-plugin-view-videos-animations-games
    You are using Firefox 25.0; Firefox 25.0.1 was released November 15, 2013. Follow the instructions to update below and read the release notes to see what changed.
    *Update Firefox - https://support.mozilla.org/en-US/kb/update-firefox-latest-version
    *Release notes Firefox 25.0.1 - https://www.mozilla.org/en-US/firefox/25.0.1/releasenotes/

  • Not able to delete a delivery after revenue recognition is reversed

    Hello Gurus,
    We have a situation for certain Sales Order types after creation of Sales Order -> Delivery and PGI, we do revenue recognition. But there was some mistake and delivery needed to be deleted and recreated if needed. So after doing revenue recognition reversal we are reversing the PGI. After this when we try to delete the  Delivery ( which would have got deleted if there was no revenue recognition process ) we get the below error.
    Is it a problem with the way Revenue recognition is configured or does the standard behave like this. If the Invoice is also present in the above I am able to cancel the Invoice. If you think its a problem with the way Revenue reccognition is configured please advise.
    Item 000010 cannot be deleted (revenue recognition status)
    Message no. VL896
    Diagnosis
    The delivery or delivery item cannot be deleted.
    System response
    The document cannot be deleted since the delivery contains items that
    reference sales document items that are relevant for revenue
    recognition. When the goods issue was posted, the system created revenue
    lines that had already been recognized. This means that there are
    subsequent documents in revenue recognition for this delivery.
    Procedure
    If you no longer require the delivery or delivery item for deletion, set
    the delivery quantities to zero and repost the goods issue. Make sure
    that the quantity zero is allowed in Customizing for the delivery item
    category. When the goods issue is posted, the overall processing status
    is set to C and the delivery can be archived. Message determination
    should be configured not to send any messages in this case. To make sure
    that the system makes revenue corrections if there are differences
    vbetween billed and recognized values, set a billing-relevant rejection
    reason in the sales document item if more than one partial delivery is
    allowed.
    If you still want to use the delivery, adjust the delivery quantities
    accordingly. Alternatively, deliver the referencing sales document item
    again. Note that the sales document item cannot be delivered again if
    only a partial delivery is allowed.
    What are the changes I can do to Delete the Delivery?
    If I cannot Delete the Delivery, Should I make the Delivery as 0 qty and create a new delivery with changed qty and do further process. Or should I reject the Sales Order and create a new sales order with exact qty and do further process.
    Please advise.
    Regards,
    SNK.
    Delivery has one line item. For the above case scenario, invoice is there for some deliveries and for some deliveries there is no invoice. Eg: SO -> DN -> PGI -> Rev Recog -> Iv or SO -> DN -> PGI -> Rev Recog. Requirement was SO was wrongly created as the qty was wrong or in some cases SO needs to be rejected. I am able to cancel Invoice. Rev recog is reversed. PGI is cancelled by VL09. Not able to delete Delivery and I get the above error. Ideally I thought since Rev recog is reversed, Delivery should have been deleted but not happening and above error comes.
    SO - Sales Order DN - Delivery IV - Invoice
    Edited by: sapconsultnt on Dec 16, 2009 5:06 AM

    Hello,
    Please review the Note 1224871 which introduced this functionality.
    Regards,
    Raghavendra YN

  • How to view deleted delivery

    Hello All,
    I have a sales order for which the delivery is deleted.I want to see the delivery details.I have the delivery number but am unable to find it either in vl03n or Likp table.
    I am also not able to find it in the document flow of the sales order.Is there any transaction or table where i can see the details for the deleted delivery.
    Thanks in advance.

    Hello,
    I solved this problem this way. Because the delivery is realy deleted from SAP you can use only a data paralely created with your delivery.
    VL22 - Change report - no all information are there
    MB51 - Material document list
    - Reference field of the selection screen is your deleted delivery number - insert with * before and after for exampel 80011313. You will get info about material movements related to your delivery. When you double-click material document there detail about article number, batches, partner/customer etc.
    I hope this help although this is a litle late after your question.

  • SRM 7 - Deleting a cart even when PO exists

    Hi all,
    As per OSS note 1649794,in SRM 7,a cart can be deletd(item level) even afyer the follow on document i.e. PO is created.
    Is there a way we can control to not allow requester to be able to delete a cart when a PO exists for the cart?

    Hi ,
    Does your employees Delete SC in other status (for example, delete in held status)?
    If no, you can remove authorizations for delete in PFCG for employee roles.
    Auth Object : BBP_PD_SC
    Remove Activity: 06 from Employee role.
    Ofcourse, if the user has any other role where Auth is included, this solution will not work.
    Best regards,
    Ramki

  • Not able to delete inbound delivery.

    Hi Gurus,
    Please help me delete inbound delivery. I have a ticket where user is not able to delete inbound delivery. I tried to delete this delivery and I’m also getting the same errors that user is getting.
    I have tried to insert real screen shots from production system in this post to give a better understanding of the scenario.
    The situation is: PO was created for 2 line items for same material but different batch, for different quantities.
    For line item 1:
    1.      Two separate partial deliveries were received along with 1 delivery note each, for quantities 14,957.130 KG and 855.017 KG.
    2.      Goods issue was posted for both quantities.
    3.      Invoice receipt was done for both quantities.
    4.      Goods receipt was done for both quantities.
    5.      However, goods receipt was later reversed for quantity 14,957.130 KG.
    Screenshots Line item 1
    For line item 2:
    1.      One delivery was received for full quantity of 292.112 KG.
    2.      Goods issue was posted for same quantity.
    3.      Invoice receipt was posted for same quantity.
    4.      Goods receipt was posted for same quantity.
    5.      However, goods receipt was later reversed for full quantity.
    Inbound Delivery screens below:
    Error VL32N screen
    Message in VL09 when trying to reverse goods movement with reference to inbound delivery:
    Please tell me how can this inbound delivery be deleted?
    Points will be awarded for right help.
    Thank you for viewing.

    Hi
    BV Yadav:
    1. it's the business user who posted the invoice, and posted goods issue the was it appears in PO history.  i'm not sure how they did it.
    Kamlesh: I tried both, changing the document date and delivery date to current. i still got same error. still not able to delete inbound delivery.
    Tomas Figura: Puaway QTY is already 0. this field is blank, nothing in it. pic below:
    Note: someone has suggested to follow the process to reverse as many postings that have been done against the PO as possible and ultimately delete the PO, this will break all links between PO and inbound, outbound deliveries. and hence, there won't be a need to delete inbound delivery anymore.  then the business user can start the brand new process from scratch by creating a new PO, create a new outbound, inbound deliveries, and all. what do you guys think of it? Please comment.
    Thank you guys.

  • I have around 2000 photos on my camera roll as back up and now i am not able to delete unwanted photos and they are not even getting synced wid d computer so what should i do now?? they are using 9 gb of the space!!!

    i have around 2000 photos on my camera roll as back up and now i am not able to delete unwanted photos and they are not even getting synced wid d computer so what should i do now?? they are using 9 gb of the space!!!

    Chris CA wrote:
    You cannot backup photos to iCloud.
    You can enable Photo Stream (in Settings > iCloud) but only for 30 days and only a max of 1000 photos.
    Then what does this mean? It was copied from the kb article that I posted above.
    Reducing the size of your Camera Roll backup
    If you take lots of photos and videos with your iOS device, you may notice your Camera Roll takes up most of your iCloud Storage backup. To check the size of the Camera Roll backup on your device:
    On your Home Screen, tap Settings.
    Tap iCloud.
    Tap Storage & Backup.
    Tap Manage Storage.
    In the Backups section, tap your device.
    In the Backup Options section, the backup size is displayed under Camera Roll.
    To reduce the size of your Camera Roll backup, save your photos and videos locally to your computer with iTunes, and then manually back up your iOS device. If you want to keep your photos and videos on your iOS device, you can turn off Camera Roll in Backup (see the "Deleting backups and turning off Backup for your Device" section above) orpurchase additional storage.

  • Not able to delete line items using BAPI_OUTB_DELIVERY_CHANGE

    Hi,
        Not able to delete line items of a delivery using BAPI 'BAPI_OUTB_DELIVERY_CHANGE', with thte below code and even return parameter has zero messages.
    I have even checked existing below posting.
    https://www.sdn.sap.com/irj/scn/logon?redirect=http%3a%2f%2fforums.sdn.sap.com%2fthread.jspa%3fthreadid%3d782509
    Below is the code that i am using.........
    *wa1-deliv_numb = wa_lips-vbeln.
    wa1-deliv_item = wa_lips-posnr.
    APPEND wa1 to item_data.
    wa-deliv_numb = vbeln_so .
    wa-deliv_item = l_item.
    wa-del_item = 'X'.
    APPEND wa TO item_control.
    w_header_data-deliv_numb = vbeln_so .
    w_header_control-deliv_numb = vbeln_so .
    w_delivery = vbeln_so .
    *w_header_control-dlv_del = 'X'. "Delete whole Delivery
    CALL FUNCTION 'BAPI_OUTB_DELIVERY_CHANGE'
      EXPORTING
        header_data    = w_header_data
        header_control = w_header_control
        delivery       = w_delivery
      TABLES
       item_data      = item_data
        item_control   = item_control
        return         = return.
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
        EXPORTING
          wait = 'X'.
    I have even  tried uncommenting item_data parameter but not able to delete line item.....i am able to delete whole delivery but not line items .........can any one of u help me in resolving this issiue plz ???
    Regards,
    M, Manohar

    Kindly use WS_DELIVERY_UPDATE to delete the items
    Sample code:
    L_VBKOK-VBELN_VL = vbeln_so.
    clear l_vbpok.
             refresh l_vbpok.
             l_vbpok-vbeln_vl = vbeln_so
             l_vbpok-posnr_vl = wa_deliv_item.
             l_vbpok-lips_del = c_x.
             append l_vbpok.
             set update task local.
             call function 'WS_DELIVERY_UPDATE'
               exporting
                 vbkok_wa = l_vbkok
                 commit   = ' '
                 delivery = lv_delivery
               tables
                 vbpok_tab = l_vbpok
               exceptions
                 others   = 0.
             commit work and wait.

  • Couldn't delete delivery because of billing issue

    Hi,
      When I try to delete a delivery document it is not allowing saying "billing operation already exists for item 10". But I have already reversed the billing document. Even after that I am facing this issue. How to delete the document now?
    Thanks in Advance,
    Regards,
    Rahul.

    Hi Rahul
    You can not delete a Billing document.
    I am sure , you must have cancelled it.
    Then reverse the PGI through VL09.
    then,cancel the transfer order through LT15.
    Now, you should be able to delete the Delivery document.

Maybe you are looking for