Able to login into Portal with http but not https

NT4
8.1.6.3 DB
9iAS 1.0.2.2
Oracle Portal 3.0.9
I have been following Note 136153.1 to configure Oracle Portal to use HTTPS.
I am able to login into Portal using http(e.g) http://machinename.net/pls/portal30. I have configured http.conf asdescribed in
136153 and used the ssodatan script to associate the login server with https.
I am able to connect to https://machinename.net and can see theSecurity
Certificate. I am also to login into
https://machinename.net/pls/portal30/admin_/gateway.htm?schema=portal30 and see
the Gateway configuration. It is only when I go to
https://machinename.net/pls/portal30 I receive the error message -
Error: Timeout
occurred whilst retrieving page meta data.
If I revert the settings back toPort 80 in http.conf back to Port 80 and
re-run ssodatan using http://machinename.net/pls/portal30 etc then I am able to
succesfully log intoPortal
Can anyone help with this?
null

Hi Arun,
Most of the times unable to login to portal causes due to network problems
Please ensure in backend system all application servers are up in SM51
if it is happening every day same time check java patches

Similar Messages

  • Administrator Not able to login Into Portal

    Hi,
    Adminitsrator not able to login into Portal system. I could access succesfully in visual admin .
    Other users can enter in portal screen. I have reset administrator password even then not able to login..
    - Kritene

    Hi Kristene,
       The admin user can get locked due to numerous unsuccessful logon attempts. To correct this situation, you have to use an emergency user SAP*. In the SAP Library, use the following path: "SAP Library -> SAP NetWeaver Library -> SAP NetWeaver by Key Capability -> Security -> Identity Management -> User Management Engine -> Administration of Users, Groups, and Roles -> Activating the Emergency User".
    Log on to the Visual Administrator using the emergency user and unlock the Administrator user. Afterwards, deactivate the emergency user.
    Regards,
    Pooja.

  • Framework page error not able to login into portal

    Hi,
    we are using EP 6.0 and it's working fine today i'm trying to login into portal but it's gives me the following error.
    Portal Runtime Error
    An exception occurred while processing a request for :
    iView : pcd:portal_content/every_user/general/defaultDesktop/frameworkPages/frameworkpage/com.sap.portal.layoutPortal1_Framework
    Component Name : com.sap.portal.layouts.framework.framework
    i didn't understand what happened, we are not doing any change in portal.
    regards,

    Have you tried looking at the LogViewer service in Visual Admin? defaultTrace.trc may contain more information which can help solve the problem. If you can post the error messages you see for the time you log in, we may be able to help more.
    Regards
    Darren
    <a href="http://www.fortybeans.com/">Read my blog</a>

  • Not able to login into portal

    Hi,
    from today morning our user facing problem,
    no one can login into portal, when use enter user id and password in logon page then press to login, the logon page appear agains without any message?
    what could be the reason?
    EP version 7.0
    database  : SQL 2005
    regards,
    kinjal

    HI,
    look like problem with keystorage.
    open J2EE visual Admin tool from following location
    <drive:>\usr\sap\SID\JC<inst_no>\j2ee\admin\go.bat
    connect it.
    expand server -> services -> click on Key Storage -> under view select TicketKeystore
    delete SAPLogonTicketKeypair and SAPLogonTicketKeypair-cert and create it again with CN=SID,OU=SAP Web As,O=SAP Trust Community,C=IN
    C= your country
    restart the portal server.
    regards,
    kaushal

  • PUT Blobs of size greater than 5.5MB fail with HTTPS but not HTTP

    I have written a Cygwin app that uploads (using the REST API PUT operation) Block Blobs to my Azure storage account, and it works well for different size blobs when using HTTP. However, use of SSL (i.e. PUT using HTTPS) fails for Blobs greater than 5.5MB.
    Blobs less than 5.5MB upload correctly. Anything greater and I find that the TCP session (as seen by Wireshark) reports a dwindling window size that goes to 0 once the aforementioned number of bytes have been transferred. The failure is very repeatable and
    consistent. As a point of reference,  PUT operations against my Google/AWS/HP accounts work fine when using HTTPS for various object sizes, which suggests my problem is not in my client but specific to the HTTPS implementation on the MSAZURE storage servers. 
    If I upload the 5.5MB blob as two separate uploads of 4MB and 1.5MB followed by a PUT Block List, the operation succeeds as long as the two uploads used
    separate HTTPS sessions. Notice the emphasis on separate. That same operation fails if I attempt to maintain an HTTPS session across both uploads. This is another data point that seems to suggest that the Storage
    server has a problem 
    Any ideas on why I might be seeing this odd behavior that appears very specific to MS Azure HTTPS, but is not seen when used against AWS/Google/HP cloud storage servers?

    Hi,
    I'm getting this problem also when trying to upload blobs > 5.5mb using the Azure PHP SDK with HTTPS.
    There is no way I can find to get a blob > 5.5mb to upload, unless you use http, rather than https, which is not a good solution.
    I've written my own scripts to use the HTTP_Request2 library, to send the request as a test, and it fails with that also when using the 'socket' method.
    However, if I write a script using the PHP Curl extension directly, then it works fine, and blobs > 5.5mb get uploaded.
    It seems to be irrelevant which method is used, uploading in 1 go, or using smaller chunks, the PHP SDK seems broken.
    Also, I think I've found another bug in the SDK, when you do the smaller chunks, the assigning of the BlockID is not correct.
    In: WindowsAzure/Blob/BlobRestProxy.php
    Line: $block->setBlockId(base64_encode(str_pad($counter++, '0', 6)));
    That is incorrect usage of the str_pad function, and if you upload a huge blob that needs splitting, then the blockIDs will after a while become a different length and therefore fail.
    It should be: str_pad($counter++, 6, '0',STR_PAD_LEFT);
    I also think there is 1 too many base64_encodes() in there, as I think its being done twice, once in that line, and then again within the createBlobBlock() just before the send() for a 2nd time.
    Can someone please advice, when this/these bug(s) will be fixed in the PHP SDK, as at the moment its useless to me as I cant upload things securely.

  • Firefox can access HTTPS but not HTTP sites

    Hi,
    All of a sudden last Friday afternoon I could not load any sites external to our corporate network over HTTP in firefox; HTTPS still works fine. Also IE doesn't have any problems.
    So far I've tried uninstalling and reinstalling, creating a new profile, disabling IPV6, disabling DNS prefetching and checking my firewall settings. I've also used wireshark to try and see what firefox is doing, but it seems that no traffic at all appears when an HTTP website is accessed, however accessing an HTTPS site does generate traffic.
    We use Windows firewall with advanced security; I can't change much though because it is controlled by policy.
    We also use McAfee for antivirus and Bluecoat for filtering; again I can't change anything here because they are either policy controlled or administered from elsewhere.
    I think I can rule out Bluecoat as other PC's on our site can and still are using Firefox 4 to access the web.
    Any help would be much appreciated.
    Many thanks
    Matthew Rose

    Two different sites, one with .info and one with .net.  One works perfectly without issue and they each have similar settings in Server, however one only seems to want to work using https prefix.  The sites are both different and therefore needs to be accessed with http at this point.  The problem is when I go to http://example.info it takes me to http://example.net which is not what needs to be occuring.  This occurs internally and externally.  Before the move I did my server was doing DNS as well and those settings have not changed or been modified except when I had to change their outside static IPs.

  • Administrator Not able to login into EP

    Hi,
    Adminitsrator not able to login into Portal system. I could access succesfully in visual admin .
    Other users can enter in portal screen. I have reset administrator password even then not able to login..
    - Kritene

    Hi Kristene,
    The admin user can get locked due to numerous unsuccessful logon attempts. To correct this situation, you have to use an emergency user SAP*. In the SAP Library, use the following path: "SAP Library -> SAP NetWeaver Library -> SAP NetWeaver by Key Capability -> Security -> Identity Management -> User Management Engine -> Administration of Users, Groups, and Roles -> Activating the Emergency User".
    Log on to the Visual Administrator using the emergency user and unlock the Administrator user. Afterwards, deactivate the emergency user.
    Regards,
    Pooja.

  • Wha wha wha??  Can only access https sites, not http?

    This is odd. I don't have a firewall. I can get on https but not http. Software Update also doesn't work, nor does anything iTunes does that needs the internet.
    Also, I suddenly need to type in an administrator password any time I modify or move anything in the Applications folder. I didn't used to have to do that.
    I don't know if this is related, but around the time this happened, I was trying to fix some annoying Time Capsule issue. I was able to finally fix it by using the Terminal and typing in some unix stuff:
    sudo chflags nouchg /Volumes/Data ("Data" being the name of the data folder in Time Capsule)
    sudo chmod 775 /Volumes/Data
    I used the same commands on my wife's MacBook, which was having the same Time Capsule issue, and she can still connect to the internet just fine. Anyone have any idea what's going on?

    Nero86 wrote:... compiled , and make installed.
    This is a bad idea.  Now you have untracked files in your root directory and there is a fair chance this could lead to a file conflict when running pacman in the future.  You should make a PKGBUILD for anything you want to build yourself.

  • I used to be able to sync my iphone with itunes, but now when I plug my iphone into my computer it no longer syncs or even shows the device icon.  Could this be because I have an old iphone and it's not compatible with the latest version of itunes?

    I used to be able to sync my iphone with itunes, but now when I plug my iphone into my computer it no longer syncs or even shows the device icon.  Could this be because I have an old iphone and it's not compatible with the latest version of itunes?

    Refer to this article under section 4: Verify that the Apple Mobile Device USB Driver is installed
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • After an recent OS7 update my iPad2 requested a restore which I did, at the end my iPad jumped into "communicating with iTune" but it never communicates. I restored 3 time alreaady and I am not able to communicate with iTune to be able to use my iPad

    After an recent OS7 update my iPad2 requested a restore which I did, at the end my iPad jumped into "communicating with iTune" but it never communicates. I restored 3 time alreaady and I am not able to communicate with iTune to be able to use my iPad which is my working tool.
    What should I do?

    Communicate with iTunes? What does this mean? Tell us what you are seeing on your screen and what you then try to do?

  • Not able to login into hyperion Workspace.

    Hi,
    We have upgraded from Essbase from 9.3.1 to 11.1.1.3 sucessfully. I have also done the reconfiguration sucessfully. I have started all the services of essbase withou any problem. I am able to login into shared services howerver when i login into workspace i am getting the error.
    1) I have restarted the HFR and Workspace many times and reconfigured many times but still the same problem.
    2) when i say netstat -an | grep 6800 the port 6800 is not listening. Is there any service 11.1.1.3 to start this service. The other ports like 8200 and 8299 are listening.
    Attached are the screenshots from my blog. http://hyperion-consulting.blogspot.com
    Kindly help me out.
    Regards,
    VJ

    Here are details about starting the workspace agent - http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_install/ch05s03s05.html
    workspace web app - http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_install/ch05s03s17.html
    script to start all epm services running on a machine - http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_install/ch05s01.html
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Could not able to login into Oracle

    Hi ,
    I am using Oracle 9i as Database .
    I am not able to login into Database please help .
    when i tried with system and admin it displays : Invalid username/password ; logon denied
    when i tried with scott/tiger : It displays account is locked.
    Please help how can i resolve .

    Thank you.
    i opened a cmd prompt and ran your command
    It displayed all these , sorry i dont know what to eliminate so posting the full .
    Microsoft Windows XP [Version 5.1.2600]
    (C) Copyright 1985-2001 Microsoft Corp.
    C:\Documents and Settings\sai>set
    ALLUSERSPROFILE=C:\Documents and Settings\All Users
    APPDATA=C:\Documents and Settings\sai\Application Data
    CLIENTNAME=Console
    CommonProgramFiles=C:\Program Files\Common Files
    COMPUTERNAME=GECE-8403C670A1
    ComSpec=C:\WINDOWS\system32\cmd.exe
    FP_NO_HOST_CHECK=NO
    HOMEDRIVE=C:
    HOMEPATH=\Documents and Settings\sai
    JSERV=D:\oracle\ora90/Apache/Jserv/conf
    LOGONSERVER=\\GECE-8403C670A1
    NUMBER_OF_PROCESSORS=2
    OLAP_HOME=D:\oracle\ora90\olap
    OS=Windows_NT
    Path=D:\oracle\ora90\bin;D:\oracle\ora90\Apache\Perl\5.00503\bin\mswin32-x86;C:\
    Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\Sys
    tem32\Wbem
    PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
    PROCESSOR_ARCHITECTURE=x86
    PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 13, GenuineIntel
    PROCESSOR_LEVEL=6
    PROCESSOR_REVISION=0f0d
    ProgramFiles=C:\Program Files
    PROMPT=$P$G
    SESSIONNAME=Console
    SystemDrive=C:
    SystemRoot=C:\WINDOWS
    TEMP=C:\DOCUME~1\sai\LOCALS~1\Temp
    TMP=C:\DOCUME~1\sai\LOCALS~1\Temp
    USERDOMAIN=GECE-8403C670A1
    USERNAME=sai
    USERPROFILE=C:\Documents and Settings\sai
    windir=C:\WINDOWS
    WV_GATEWAY_CFG=D:\oracle\ora90\Apache\modplsql\cfg\wdbsvr.app
    C:\Documents and Settings\sai>sqlplus
    SQL*Plus: Release 9.0.1.0.1 - Production on Sat Jan 2 22:56:31 2010
    (c) Copyright 2001 Oracle Corporation. All rights reserved.
    Enter user-name: / as sysdba
    Connected to:
    Oracle9i Enterprise Edition Release 9.0.1.1.1 - Production
    With the Partitioning option
    JServer Release 9.0.1.1.1 - Production
    SQL> select * from v$version
    2 ;
    BANNER
    Oracle9i Enterprise Edition Release 9.0.1.1.1 - Production
    PL/SQL Release 9.0.1.1.1 - Production
    CORE 9.0.1.1.1 Production
    TNS for 32-bit Windows: Version 9.0.1.1.0 - Production
    NLSRTL Version 9.0.1.1.1 - Production

  • Not able to login into CUCM web administation page

    Hi team,
              I have changed the CUCM hostname and ip address using CISCO unified communications answer file genarator tool. After that i am able to login into CUCM console using new credentials but when i tried to login into CUCM administation page it is throwing "Database Communication error" ,please check the attached image.
               So is there any workaround or solution for this.
    Note: I am able login into OS administration successfully..
    Thanks in advance.
    Sasikumar.

    Hi Chris,
         When i tried to check the Db replication status it is showing as "no values are returned" .
         command Used:      admin: show perf query class "Number of Replicates Created and State of Replication"
         O/p:     no values are returned
         Need help on this.
    Thanks in advance,
    Sasikumar.

  • I am trying to install windows 7 to my Macbook pro with bootcamp but every time I open bootcamp I am only able to check the first two boxes but not the third one saying "install or remove Windows 7", any solutions ?

    Hi, I am trying to install Windows on my MacBook Pro with bootcamp. Every time I open bootcamp I am only able to check the first two boxes but not the third one saying "install or remove Windows 7". I did this before using the same computer and the same hard drive so I am not sure why this is happening now but did´t happen then. Any solutions ?

    Was your Bootcamp info.plist manipulated to change any options?

  • I m not able to login into VIBGYOR kid website via ipad

    I m not able to login into parents login at VIBGYOR kid website via ipad. I m using google chrome to visit the website.

    try another browser and see if that helps.  Can you log in to that site on your computer?

Maybe you are looking for