Able to only view some clips after installing latest flash update
I find that I am able watch some clips, but only after having switched to a different quality setting as with this clip: http://www.break.com/index/worlds-fastest-roller-coaster-1955594
which will fail to run at 360p, but will run at 480p. Same problem with other clips, but if there is no option to change the setting, I am unable to play any clips.
I have uninstalled the flash update and reinstalled, then updated my graphic card driver, cleaned hd and have seen that it will play all clips sometimes for awhile and then go back to having these problems.
My connection is 7mbit.
Ideas?
TY in advance
I went to the site that you linked, and I can see the clip at 360p, but with lots of buffering breaks (my connection is 1Gbps), but won't load at all at 480p. I think something is wrong with that site.
Similar Messages
-
View BBC TV after installing latest flash player
I cannot view BBC TV even after installing the latest flash player, I am requested to install same version .
What is your browser? If IE check
http://forums.adobe.com/thread/885448
http://forums.adobe.com/thread/867968 -
What's Happening?? Some days after installing latest security update for 10.5.8 on G4, both inernal CD/DVD drives failed to mount disks other than a cleaning disk which mounted and was imported into iTunes. No other CD or DVD disk will mount.Is this a unique experience?
Hello Robert,
First, Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
Then move these files to the Desktop...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/YourUserName/Library/Preferences/com.apple.desktop.plist
/Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
Reboot & test.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive. -
Will not start even in safe boot after installing latest camera update
MacBook Pro will not start even in safe boot after installing latest camera update.
I started my machine and did a software update. Only the camera update needed. So installed and when required I pressed restart. It restarted and did install. Then restarted again. I expected to get to the login screen and it turned itself off. Tried three more times. Each time shutting off. I unplugged everything, and pressed start waiting for log in window. No it shutdown before the log in window. I then tried safe mode and that did not work either on three more occasions.I have managed to resolve some issues. I can now restart the machine via a CD boot. If I do cmd C into something like tech tool pro, then restart from that disks menu it restarts every time.
If I try a safe start it shuts down. If I try a normal start it shuts down. I have managed to repair permissions and that cleared up some start up permissions but with no improvement to the boot problem. The only way to load is via the cmd-C boot option. Any other ideas? -
All applications in iWork fail to open after installing latest apple update. iMac running 10.6.8 Snow Leopard. Have tried reinstalling from iWork disc but no improvement. Help!
Error report as follows
Process: Pages [208]
Path: /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
Identifier: com.apple.iWork.Pages
Version: 4.1 (923)
Build Info: Pages-9230000~1
Code Type: X86 (Native)
Parent Process: launchd [93]
Date/Time: 2012-08-22 12:33:15.909 +0100
OS Version: Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report: 102101 sec
Crashes Since Last Report: 11
Per-App Interval Since Last Report: 2217715 sec
Per-App Crashes Since Last Report: 4
Anonymous UUID: 1FA704D3-D5EF-4CE3-9813-42E4559157DC
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Symbol not found: _SFAAutosaveUserActivityException
Referenced from: /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
Expected in: /Library/Application Support/iWork '09/Frameworks/SFArchiving.framework/Versions/A/SFArchivingI'm having this issue as well only with a little different twist I guess. I'm transferring the iWorks applications from my Macbook Pro 3,1 with Lion to a new MBP 10,1 running Mountain Lion. I transferred the apps over using DropCopy since the older MBP doesn't have AirPlay. Applications show up but crash upon opening. This is the first install so there are no previous plist, versions or such to delete. All three crashed upon opening every time until I just had to have Keynote and purchased again - although Apple agreed to refund that purchase since my previous version quit working. Any ideas since I don't have any previous plist/versions to delete? Thanks in adavnce for any help you can offer.
Process: Pages [13521]
Path: /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
Identifier: com.apple.iWork.Pages
Version: 4.3 (1048)
Build Info: Pages-10480000~1
Code Type: X86 (Native)
Parent Process: launchd [153]
User ID: 501
Date/Time: 2013-03-11 14:57:02.175 -0400
OS Version: Mac OS X 10.8.2 (12C3103)
Report Version: 10
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: @rpath/SFCompatibility.framework/Versions/A/SFCompatibility
Referenced from: /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
Reason: image not found
Binary Images:
0x1000 - 0x354fe3 com.apple.iWork.Pages (4.3 - 1048) <3F2BE397-E81E-3355-C0DE-8B0F014E897B> /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
0x3ec000 - 0x46bff7 com.apple.iLifeMediaBrowser (2.7.2 - 546) <24A0A118-874B-3C7C-B50C-C80BED03A15F> /System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/iLifeM ediaBrowser
0x8fe3e000 - 0x8fe70e57 dyld (210.2.3) <23DBDBB1-1D21-342C-AC2A-0E55F27E6A1F> /usr/lib/dyld -
Can not open itunes after installing latest version update 11.2
Can not open itunes after installing latest version update 11.2
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
After installing latest OS 5.1 update I can no longer print to my HP Officejet Pro 8600 printer? Suggestions?
Installing the new os may have tricked one of the three devices involved. If it used to work, it will again.
Reboot the printer. Reboot the router. On the pad, general, reset, reset network connections.
Make sure all the devices are on the same wifi network. Talk nice to it. -
Bus error on some applications after installing 2013-002 update
Hi,
After installing 2013-002 Security Update on Mac Os 10.6.8 I get Bus Error when starting chrome (last version), trying to select a disc image in VirtualBox 4.2.12 and possibly in other applications.
Any known bug that I'm not aware of? Reseting PRAM didn't work.
Thanks.Tried to fix permission with Disk Utility but it didn't work.
Here is the beggining of my crash reports:
Process:
Google Chrome [248]
Path:
/Applications/Google Chrome.app/Contents/MacOS/Google Chrome
Identifier:
com.google.Chrome
Version:
27.0.1453.110 (1453.110)
Code Type:
X86 (Native)
Parent Process: launchd [211]
Date/Time:
2013-06-05 17:58:25.353 -0300
OS Version:
Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report:
13318 sec
Crashes Since Last Report:
25
Per-App Interval Since Last Report: 40 sec
Per-App Crashes Since Last Report: 11
Anonymous UUID:
9839EF92-04E8-4A96-A582-68E940C20B35
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x000000000000000a
Crashed Thread: 0 CrBrowserMain Dispatch queue: com.apple.main-thread -
After installing last Flash update, YouTube videos only open after complete download.
I'm using Windows 7, x64, Firefox 8, since it appears. Yesterday a Flash update flags on my screen and I accept it. Now, videos from YouTube only start when they are completed downloaded. For example, a 30s video starts almost immediately while longer ones takes more to start. I just checked videos until 3 or 4 minutes, no patience to wait for longer ones.
I think the problem is in Firefox because this delay doesn't occur with IE, where the video starts immediately and keeps playing while downloading at the same time (as it always was in both browsers).I'm using Windows 7, x64, Firefox 8, since it appears. Yesterday a Flash update flags on my screen and I accept it. Now, videos from YouTube only start when they are completed downloaded. For example, a 30s video starts almost immediately while longer ones takes more to start. I just checked videos until 3 or 4 minutes, no patience to wait for longer ones.
I think the problem is in Firefox because this delay doesn't occur with IE, where the video starts immediately and keeps playing while downloading at the same time (as it always was in both browsers). -
After installing latest quicktime update CPU lags/freezes
After just installing the latest quicktime update through my apple software my cpu has had extra strain - hearing the fan going on constantly... it started freezing and getting ridiculous. I uninstalled quicktime and it is perfectly fine, this doesnt fix the problem however as I can't run itunes without quicktime... anyone else having this problem or have a way to get around it?
*An update*
I have found an ad hoc solution to this problem. I found that I did not calibrate my battery for a long time. Coconut battery showed my current battery capacity to be at 88%. So, I calibrated my battery. After a restart, I found that the battery capacity had increased to 91% and the fan noise had stopped.
The machine is running for over two hours after the calibration and I haven't yet heard that noise. I shall run the machine for few more hours and see whether the sound reappears.
Clearly, if this is a solution, it is ad hoc. If somebody can come up with an analytic solution, that will be great. My hunch was that the fan speed is somewhat tied with the battery capacity in some indirect manner.
Message was edited by: mssm72 -
MacBookPro Freezes after Installing Latest Security Update 2006-003
After downloading and installing the latest security update 2006-003, MacBook Pro freezes when trying to do anything. Seems to do ok in safe mode but did freeze when trying to verify disk with Disk Utility. (did not try to repair as I am out of town at a motel without Tiger disks). Any suggestions before calling apple?
MacBook Pro 15 Mac OS X (10.4.6)Since my post, I think I have solved the problem. At least MyMacBook is working ok so far. What I did is started up in safe mode (for the third time) then I went through the "Library" and looked for stuff that looked like it wouldn't work on a MacBook. This included some Norton Utility things. Also went through preferences and Application Support and did the same thing. By the way I had transferred all this stuff from my old Mac using the transfer app and connecting the two with firewire.
Anyway, it's been working for about an hour. I'll keep this post open for a couple of days to see if it keeps working.
Bill -
HT1926 Problems synchronizing iPod touch after installing latest iTunes update
After having installed the latest iTunes update I can't sync my iPod touch with iTunes anymore. Error message reads: Attempting to copy to the disk "Acer" failed. The device is not connected." I already re-installed iTunes completely. Another error message says: "iTunes could not back up the iPod because the iPod is disconnected". But the iPod was connected. What can I do?
Temporarily disable any security software on the computer.
-
Trouble connecting to Airport after installing latest security update
Hi, I have just spent an hour with a level 2 SBC DSL tech and they could not resolve my problem. The problem is this: After installing the latest security update released on March 13 for OS 10.3.9, I can no longer securely connect to my airport. It may have something to do with the keychain because this has happened several times before, most recently after the previous security update about 2 weeks ago. Usually after much playing around, I get a window asking for permission for my new network settings to access the keychain. Once I say yes, all works fine. This time, I am not getting that prompt. Even though I have a full signal showing I am connected to the base, it will not pick up and IP address. Finally, the SBC tech had me disable the wireless key on the desktop pc that is the primary computer on the system and immediately my connections works. If I enable the wireless security key, I lose the connection. As I am completely open to hackers with the wireless security disabled, this is a big problem. PLEASE, PLEASE, PLEASE can anybody help me?! Thank you so much for your help!
Hi, my first post here!
I too experienced this problem this evening, after applying the latest security update to Panther. I had verified that the wireless base station was working correctly and that it's WEP key hadn't become corrupted. There were no error messages after re-starting the Mac, just no IP number via airport.
The keychain utility would hang if any attempt was made to alter the password for WEP, and the airport utility hung too. I used Disc Utility to verify permissions, which found dozens of errors - haven't done any maintenance for months - and fixed them.
On re-starting, Airport was 'OFF' so turned it on, was asked to allow access to keychain, and all is working again.
Thank you to those of you who posted the suggestion about permissions, you certainly saved my evening!
Chris -
Ethernet will not connect after installing latest Security Update.
I installed the latest security update, restarted my computer, and found that it now will not connect to the internet. I get the message "Could not find a PPPoE server". I have checked all of my settings, restarted the computer again, turned the modem off and on again, etc., but nothing helps. I know that there is nothing wrong with the modem and server because I am connected through the same DSL modem to this computer (a mac mini). It would seem that the security update has done something unhelpful! Any ideas?
BTW, the ibook does not have a wireless card and I had not installed 2 earlier wireless updates. I only installed this one because it said "recommended for all users".
iBook G4 Mac OS X (10.4.7)Hello
It seems that the update set your preferences to "use PPPOe" while you where using "TCP/IP".
Go to "System Preferences" and enter the pane whose icon is named "Réseau" in french (maybe "Network" in english.
Reset your settings to "TCP/IP".
Yvan KOENIG (from FRANCE vendredi 22 septembre 2006 08:13:56) -
Windows XP cannot shutdown after installing latest Flash Player
Anybody know what is wrong with latest version of flash
player?
i installed the latest version of flash player (download from
adobe), when I need to shutdown my Windows XP, the system does not
allow me to shutdown. I have to terminate the process
install_flash_player
Appreciate if anyone can advice me..Haven't ever heard of Windows not being able to shut down
at all because of a certain process. If anything, it'll ask
you if you want to terminate it, and you just hit ok and it
continues shutting down.
Not to call you a lair or anything, just hadn't ever heard of
that, so I'd try re-installing the Flash Player first and foremost.
Don't just download the same player and install, first download
their flash_uninstaller, then re-download the flash player, and
install it.
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14157
Maybe you are looking for
-
6th gen nano not recognized by windows 7 64 bit
My nano is not seen by my computer or Itunes. also when i download itunes there appear to be no drivers for mobile support. what am i doing wrong? I tried all the steps found on apple support and nothing works. My sync cable is brand new and all my u
-
Mac computer will not laod firefox 4.0 disk always fails to mount shows as corrupt
I am trying to upgrade my Mac computer to fire fox 4.0 When download is completed it shows as unable to mount corrupted image It happened a number of times I am still using Fire fox 2.0
-
Hi. My Face Time continuisely shuts itself down after about a minute of use. Can anyone suggest what might be causing this and how I can sort it out. This only happens on my MacBook Pro and not on any of my other devices.
-
Correction to OLAP9.2 User's Guide & CNV_CWM.TO.ECM
For Your Information... Oracle9i OLAP User's Guide Release 2 (9.2) Please note that the example call to CNV_CWM.TO.ECM on page 9-3 is incorrect in the above User's Guide. The two NAs should not be enclosed in quotes.
-
Interface of FM CKBA_ROUTING_GET_LIST
I am having problems with export parameter of FM CKBA_ROUTING_GET_LIST. It gives a short dump when declared with the type CKBA1_routing_tbl, which is the reference type of export parameter e_routing_tbl. There is no data dictionary data type for th