Able to receive calls or browse data - on "No Service"!!

I have experienced some peculiar observation & would appreciate to hear if someone else has faced similar situation (and knows the reason for this issue)
1. iPhone 5S used on VF Delhi: Phone shows "No Service" but I could receive a phone call
2. iPhone 5S used on Proximus: Phone shows "No Service" but could browse the net. Note no WiFi access
3. iPhone 5S used on VF Bangalore: Phone shows "No Service" but could browse the net. Note no WiFi access
Any help for details & pointers would be highly appreciated.
Sincerely
Munish

Got in touch with Apple support and got it resolved by 'resetting all settings' and setting up the iPhone again.

Similar Messages

  • HT4528 My phone turned black but able to receive calls because i know where to swipe to open it, it is fully charged, but black-tried holding down top, then tried holding top & round area. No luck!!

    My phone turned black but able to receive calls because i know where to swipe to open it, it is fully charged, but black-tried holding down top, then tried holding top & round area. No luck!!

    Make an appointment at the genius bar and have it evaluated.

  • I can't make calls from my iPhone 4. But I can receive calls and browse the Internet on it.

    I can't make calls from my iPhone 4 but I can receive calls and browse Internet.

    Surprise!!!!!! Phone won't make and accept any calls :)))), mine works the same. Soft failure, did everything for 2 weeks.

  • Skype for ipod...is it able to receive calls?

    Does anyone know for sure that iPod touch can in fact receive calls from Skype app?

    Okay, I found this out on Skype's site:
    The Skype application must be started and signed in to receive incoming Skype calls and chats. If the application has been closed, incoming Skype calls cannot be received and chats will not be delivered.
    So, can I leave my ipod logged in to Skype all the time? Will that drain my battery significantly?

  • I am not able to make call even i am able to received call

    Hay i am not able to making call even able to received

    try to cold boot your phone I experienced that before.

  • Agent being able to receive calls from 2 queues

                      I have UCCX 7.1 Express enhanced.  I have a request to add a queue for a new phone number to ring into.  My issue is that the agents that will be answering it are in 2 seperate queues now. So I have queue 1 and queue2 now and they would both need to be able to answer calls from the new queue 3. I believe I can do this somehow through skills and I have found some info from a 3X and 5X guide but nothing for 7.1
    So I was thinking there must be a way to do this.
    Thank you

    So thanks every one!! I was able to create a script with 3 seperate queue's in it.  Then I created the queue's with the skill sets I had created and then I assigned a Agent to 2 of the Skill sets and no Resource Group. I was able to call into both numbers and both showed up in my logged in Agent. I was wondering though if there is any way to make those queues show seperatly in the reporting window of the Agent under "Contact Service queue Statistics" drop down?

  • HT1976 how can i able to receive call

    He friend,i i'm in a big  problem with my iphone 4 to receive call, i can make call, send and receive sms .pls help me how solve this prob

    Hi Avinash,
    Thanks For Your Response,
    I have created task in Plan window (Navigate to Details > Compensation Workbench (Select Task Type) with Full Access.
    So could you please advise me, whether i'm skipping any step as you have been stated like Task needs to be define under 'Plan Enrollment Requirement Window'
    Thanks
    AshokP

  • Why is iPhone 6 able to receive calls but not MAKE calls?

    I can use apps, internet, and text and receive calls.But not make calls. 

    Is this a new phone?
    Are you a new customer?
    Did the phone ever make calls?

  • HT1937 My new 5c is activated with Verizon - I can send receive calls, txts, and data (internet). My problem is that the 5c keeps giving me pop up warnings that the phone is not activated.  This is also preventing me from using the vmail

    5c is activated and live on Verizon. Call, txts, and data.  Issue is that 5c thinks that is is NOT activated - keeping getting pop up warnings.  Operationally this prevents me from using v-mail via iPhone app - i need to dial Verizon directly.  This phone is new and activated yesterday. Any ideas?

    Contact Verizon to troubleshoot the issue with them.

  • HT201328 iPhone 4 able to receive calls but not make calls

    Hey,
    I received a carrier unlock through AT&T. I restored my phone in itunes and received the "congratulation your iphone is now unlocked" message. I am currently living in Belgium and using the Mobistar network. I have bought several sim cards, and none of the sim cards will activate. I can receive calls but not place them. According to the mobostar representative, this is not even possible. I have restored the phone several times using different sim cards.
    Is there potentially a problem with the phone itself? Everything is showing as if it should work, but I am unable to fix the problem - as well as the service provider here cannot.
    -Al

    Have you tried these two:
    Toggle Airplane mode on and off. Wait five seconds between the on and off modes.
    Reset Network Settings. Tap Settings > General > Reset > Reset Network Settings.

  • Receiveing "Unable to load data from Sync Services" message following iOS 5 Upgrade on iPhone 4 w/ Windows Vista, iTunes 10.5.1.  How do I repair?

    I upgraded my phone to iOS 5 yesterday.  Lost several apps which I restored through my Purchased list in the iStore.  Now when I try to sync the phone using iTunes, I receive an error message advising iTunes is unable to load data from Sync Services, and to disconnect and try again later.  Have tried again later...no difference.  After I acknowledge the error, iTunes continues to say it is Syncing the phone, but it continues to idle.
    I have an iPhone 4.  I am running iTunes 10.5.1.42 on a Windows Vista system.
    What do I need to do to clear this up?

    http://support.apple.com/kb/TS2690

  • FaceTime on MBP not able to receive calls only send

    I have two MBP on my home network connected via wire and two iPads connecting wirelessly.  MBP1/iPad1 can make FT calls to MBP2/iPad2 (...both would ring simultaneously).  However, when MBP2/iPad2 tries to FT call, only iPad2 receives the inbound FT call.  MBP2 does not receive it.  Is there something in MBP2 (some setting) that's allowing it to make outgoing calls but "blocking" incoming calls?
    Gabriel

    Hi GabrielNYC69,
    To troubleshoot this issue where one of your Macs is unable to receive a FaceTime call, please follow the steps outlined below.
    Troubleshooting FaceTime for Mac
    You can make FaceTime calls using the FaceTime app. You can call FaceTime users whose contact information is in Contacts. You can add contacts and edit contact information in either FaceTime or Contacts. To place a video call, you may use a phone number or email address.
    If you encounter issues making or receiving FaceTime calls, try the following:
    Verify that FaceTime is enabled in FaceTime > Preferences.If the issue persists, or if you see the message "Waiting for Activation", try toggling FaceTime off and then on.
    Verify that the Date, Time, and Time Zone are set correctly:
    From the Apple () menu, choose System Preferences > Date & Time > Date & Time.
    Enable "Set Automatically".
    Click the Time Zone tab and confirm the closest city is correct.
    Verify that both parties are connected to an active broadband Internet connection.
    See Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connection.
    Consult Using FaceTime behind a firewall for necessary ports to open in firewalls, security software and routers.
    If you encounter issues using a Wi-Fi network, use standard Wi-Fi network troubleshooting to resolve interference and other issues.
    Verify the phone number or email address being used is the correct one activated for FaceTime.You can verify that you are using a valid Apple ID at appleid.apple.com. You can also create an Apple ID or reset your password from this website.
    Verify that both parties have installed the latest software updates for their Mac and/or device. See:
    Mac OS X: Updating your software
    iOS: How to update your iPhone, iPad, or iPod touch
    FaceTime for Mac: Troubleshooting FaceTime - Apple Support
    Thanks for using the Apple Support Communities!
    Cheers,
    Alex H.

  • Iphone 5 not able to receive calls

    Post IOS8 update yesterday, today i experience a unique bug that doesn't allowed me to received the call while phone was locked and ringing....all the lock picture was blurred and I could not do able to do anything ...then just switched it OFF and ON. Happened twice... also while startup it took too long to detect the network
    I and launch a service complaint regarding the same let see what apple do...
    I dont know what apple is doing with iOS8?
    pl suggest
    Kamal Mathur
    9592019800

    A Lot of people with iphone are having problems a new fix iOS 8.2 is coming out in a few days
    bbsydd uk

  • Not able to receive calls...and I've been on hold for 2 hours and 15 minutes with att

    My Samsung Galaxy 5s will not receive any calls, I can text and call out but all incoming calls go to voicemail.. and no one at att customer service will take the call...I've been on hold for 2 hours and 15 minutes now and still holding. Does hours on hold with att count as minutes /phone usage ? Jk I know it does ...screwing me in both ends

    Some people are being affected by network issues. The support line and live chat queues are being hammered with customers in similar situations.

  • Why mi iphone is showing ¨iphone is deactivated¨ on the screen?... and is able to receive calls??... dont know what to do to take that away

    holaa
    hello

    If it's not on the device list, it indicates that someone has gone to Find My iPhone on icloud.com and manually deleted it from the device list (as explained here: http://help.apple.com/icloud/#mmfc0eeddd), and it has not gone back online since (which would cause it to reappear on the device list; Find My iPhone has been turned of in settings on the device; the iClolud account has been deleted from the device; or the entire devices has been erased and restored.
    Unfortunately, there's no other way to track the phone other than through Find My iPhone.  You could call your carrier and see if they would blackliste it so at least the theif couldn't use it.

Maybe you are looking for

  • Search Function does not work in Community Help

    Thanks in advance for anyone that can help. I use the Adobe Master Suite and have enjoyed the Community Help Application/Client.  I could do online searches for information with no issues.   In checking were I stood as far as offline documenation, I

  • What is a Profile Mismatch and why does it always show up?

    b Question Every time I open a file I get a prompt which reads: Embedded Profile Mismatch. Embedded: Camera RGB Profile Working: Adobe RGB (1998) I always choose the default, which is the "embedded profile (instead of working space). I have no idea w

  • I'm new to InDesign and can't find a solution to my problem

    I have been using the program for less than a week.  So far, I'm really liking it. HOWEVER... I'm having an issue with text-boxes and paragraph breaks that just isn't making sense. - probably should note I'm on Windows 7 in case that's relevant info.

  • Youtube's share option (facebook button) doesn't work

    Clicking the facebook icon would normally pup up a window and share a video into facebook, now it does nothing and gives a console error

  • Executing host through a concurrent program to load data

    hello all, Dear Friends, i want to use host command in a concurrent request to load data in a table from a flat file . for that i wrote one flat file(test_data_host.txt) , one control file(test_data_host.ctl) , one script file(test_data_host_prog.pro