Ableton and logic express 7.2 with rewire, cant get it to work

Can anyone give me a few pointer on how to rewire
ableton with le7.2??
The problem i have is that rewire DOES show up in the
environment page, but i just dont know where to start
from there. I always get intimmidated by that
environment thing in logic.
First, you don't need to do anything with the Environment if you don't need to send MIDI TO Live. If all you want is to get audio FROM Live, follow these instructions:
1. Create a new track in the Arrange window. You should be given the option to create a ReWire track. If so, select it. Your new track appears in the arrange.
2. In the parameters window on the left of screen, you'll see a value called "Channel". Click and hold, then select "Audio", then "Rewire", then "Ableton Live", then "Mix L/R"
3. Now launch Live. Any audio you play should be piped into Logic via the channel you created.
If you need to control Live via MIDI from Logic, all you need to do is create a Rewire object in the Environment, call it "Live", and change the "Device" parameter (again in the parameters box on the left of the screen) to "Live" and change the "Bus" parameter to whatever device you want to control within Live (or Reason, or any other Rewire slave). This is detailed on page 238-239 of the Logic Pro manual, which is available here (http://manuals.info.apple.com/en/LogicPro7_ReferenceManual.pdf).
Sorry that I'm not in front of Logic at the moment, and some of the names of things might be slightly different. But this should get you started.

Similar Messages

HT3423 My iMac came with logic Express 8 installed, how do I get it to work on my mac book pro

My iMac came with Logic Express 8 Pre installed. How do I get it to work on my Mac Book Pro

Along with your OS and applications installation DVDs, you should have gotten an LE8 installation DVD along with its manual and serial numbers when you bought your iMac.
Your license allows you to install LE8 on two computers as long as they are your computers, you are the sole user, and you do not run Logic on both simultaneously. So dig out your installation DVD, install it on your MacBook Pro and enter your serial number and you will be good to go.

Can I rewire GarbageBand2 and Logic Express 7?

Can I rewire (I mean using the Rewire Program) GarbageBand2 and Logic Express 7? Can either one be master and the other slave? My first guess is that I would like to go as far as I can with GB2 as the master and then make Logic Express 7 the master and create a multi-tempo song with perhaps other editing possible through Logic Express.
LuckyMan
PBG4 17 Mac OS X (10.4.2)

I got into garageband because, I, a songwriter, have a song for which I want to make a good demo. I am still trying to learn GarageBand. I would stay with GarageBand the whole way except that the song has two tempos and GarageBand can't do it. Thus I am buying Logic Express. But I don't want to learn anymore about Logic Express than I have to, to get the job done. I will stay in GarageBand as much as I can.
Unfortunately, even if I can get my multi-tempoed song back into GarageBand with rewire, GarageBand can't handle the two tempos. So, for that reason, I have to write this off as a learning experience.
Dear mother, Last week I couldn't spell pylut and now I is one.
LuckyMan
PBG4 17 Mac OS X (10.4.2)

I have just bought a 2011 iMac (2.5 ghz, 4gb) and logic express 9, and when i installed logic and tried to run it i had a message saying 'you can't use this version of the application logic express with this version of Mac OS X. How do i sort this out!?

I have just bought a 2011 iMac (2.5 ghz, 4gb) and logic express 9, and when i installed logic and tried to run it i had a message saying 'you can't use this version of the application logic express with this version of Mac OS X. How do i sort this out!? It is very frustrating as the main reason i have bought a mac is to use logic! Any help would be great as i am a complete novice when it comes to Macs!

You're probably on OS X Lion?
I had the same problem as you. I used Software Update to update Logic Express to the latest version, and then it ran without any problems.

Final Cut Studio 2 Apple Loops, Jam Packs and Logic express 8 installation?

Hi(Bonjour)!
I've currently use Final Cut Studio 2 +Soundtrack Pro 2.0.2+ application with all included Apple Loops.
I own several Jam Pack Apple Loops packages (with a less than impressive integration with Garage Band for older one).
I purchased Logic Express 8 pro today.
Is there more Apple Loops files included with Logic express 8 than with Soundtrack Pro 2?
What is the best way to install Logic express 8 Apple Loops to avoid duplicate loops files?
Thank You.
Michel Boissonneault

Well, the installation was very simple, no duplicate files and tight integration of GarageBand loops and JamPacks.
Michel B.

Original Mbox and Logic Express 9

Does the original Mbox work with Logic Express 9, or is there away to make it work? Thanks!

okay. i just figured out a really weird fix/workaround
the only input option is input 1, but, if you go to audio settings, and in the core audio settings, arbitrarily change the Sample Size, it will bring back both inputs.
like the first time i changed the buffer sample size to 512, then they came back, the next time i launched logic, it was still at 512 but the inputs stopped again, so i switched it back to 256, and now both inputs work again (prolly until i exit logic pro 9)
woo

Logic Express not syncing with phonics firewire board via audio midi

I am unable to get my logic express to sync with the phonics helix firewire board. the phonics board is recognized by the midi audio set up, but only sometimes.
I have tried adjusting the sample rate in logic and in audio midi and I have tried switching the clock source from mac to device as well as changing the firewire chord.
I am unable to get sound through the board to the computer or from the computer through the board.
I am also receiving error messages regarding the programs reading of the sample rate.
Please help.
Thank you

I received an excellent pointer over on the Mackie support forum, and that was to set up an Aggregate Device in the OS X Audio Midi Setup utility.
That worked great, and now I have analog input to my 400F, and output/monitoring on my Mac's Built-in Line Out/speakers.

Logic Pro, Logic Studio and Logic Express

Can someone explain the difference between Logic Pro, Logic Studio and Logic Express?

Hi,
I don't think your friend is right on this. When you install Logic X, only the most essential part will be downloaded. After that you open Logic X, and from within the program you can download all the other content. Logic will look if you already have Logic 9 content on your harddisk, so it won't download files that are already present. So, after all is downloaded, all files are on your harddisk, just like Logic 9. By the way, Logic 9 will still be available after installing Logic X.
Whether you will experience crashes will be very hard to prodect, because these will be caused by unforeseen combinations of your computer, audio interfaces, maybe even other hardware, kernel extensions etcetera. If you wait for a couple of months, updates of Logic X will probably have less crashes. As said, on my computer it's just as solid as Logic 9.
Garittan will probably advise a fast harddisk to prevent complaints when people are pushing the plugin to the edge. I would expect that it's not a black/white story.
The AUMatrixreverb can be found in any audio plugin slot completely at the bottom: Audio Units > Apple > AUMatrixReverb.
About the Epiano: in Logic Express there is only the Garageband Epiano, I think. Logic Pro 9 had a great ePiano that they gave a new name and changed a bit in Logic X. Both very nice.
Yes, you may be right, not too many drums with brushes in Logic X, I think. Or does anybody else know where to look??
Kind regards,
Jaap

Anyone use hypersonic 2 and logic express 9?

anyone use hypersonic 2 and logic express 9?
Message was edited by: Kajun Muzik

Actually I have found a way for at least the instrument plug ins to be accessed.
I was able to set up an instance of Sculpture in MS2 and record it in LE using Soundflower.
Route the audio from MainStage to Logic and record onto an audio track in Logic as follows:
If not already installed, get SoundFlower. After installing it.
A) Setup the sound you want in MS2 and audio output to Soundflower (remember to Apply Changes or it does not hold).
B) In Logic Express set the audio input to Soundflower and create a new audio track for recording. Important: set Soundflower's audio output to however you listen to your audio or you won't hear anything.
C) Press RECORD and start playing, LE captures Mainstage's sound.
I have not tried to wire LE's output to MS2 to take advantage of Space Designer. but since this functions, I'm not sure why that couldn't work as well. It is still flipping though a few screens though...might just be easier to get Logic Pro from the App store....

Is it OK to install both Logic Pro and Logic Express on my computer?

Is it OK to install both Logic Pro and Logic Express on my computer?
I use Logic to perform live, but i only have 2 USB drives on my computer, and i use them during my performances, one for my keyboard, and one for my audio interface...........therefore, i dont have room to plug in the "node key" in order to use Logic Pro.
So is it ok for me to have Logic Express installed, too?? This way, I dont need to plug in the "node key" (or whatever it's called).
I know i can buy a USB hub, but i cant afford one right now.
Thanks, daddies!
www.myspace.com/johnnydepth

I installed both on my PB 12" - no problem at all
cheers!

HT201441 hi i bought a ipad mini second hand and trying to set it up i cant get in contact with the last owner to reset the icloud address

hi i bought a ipad mini second hand and trying to set it up i cant get in contact with the last owner to reset the icloud address

If you are trying to activate an iPad or iPhone and it is asking for a previous owners Apple ID and password, you have encountered the Activation Lock. This is a security feature that prevents thieves from setting up and using a stolen or lost iPad or iPhone. You have no alternative. You must contact the previous owner to get permission to use the device. If you cannot contact the previous owner return the device to where you bought it and get a refund. You will never be able to activate the device and no one can help you do it.

HT201441 i bought a apple iphone 4s and it came locked from ebay & i cant get into contact with the guy its no possible way ! and im pretty ******

bought a apple iphone 4s and it came locked from ebay & i cant get into touch with the guy its no possible way annd im getting ****** !

File a complaint with eBay to get a refund on the useless iPhone.

Set up ipod touch to cox email, ive tried everything and cant get it to work. thanks!

set up ipod touch to cox email, ive tried everything and cant get it to work. thanks!

Here's an answer from the net:
Go to Settings/Mail,contacts,calendars/Add account choose other, choose Add Mail Account. Fill in name, email address, password and description on the screen that comes up. Save those.
One the next screen tat comes up click om POP in the first line then fil in the host name as
spop.west.cox.net or spop.east.cox.net or the one to go with your region.
Note that is not a misprint, that is spop (secure pop)
Fill in your username one more time (the password should have carried over from previously)
Fill in your outgoing mail server like smtp.west.cox.net (change for your region) and click Save.
When all the settings are verified a checkmark will appear next to them all and you are good to go.
If it says something like "can't connect via SSL would you like to ..." then you probably missed the step about selecting POP on the second screen and are trying IMAP so go back and try over with POP. Or perhaps mistyped soemthing.
Once everything is working you can go back into the settings and see that it has automatically connected on port 995 and that SSL is on
Note that you probably won't be able to send email from a wifi in a cafe or similar as cox won't let you connect to their smtp from outside their network.
I haven't tried receiving mail from a non cox connected wifi yet but I suspect it will work just fine. Anyway these settings work for me using my ipod to my home wifi router connected to cox.
I could not find a definitive guide when I searched so I hope this helps other folks trying to configure this.
I got the spop from "Mail for Mac OS X 10.5 configure SSL / POP" here:
http://support.cox.com/sdccommon/asp...c-7f95e8bcaf39

I plugged an android phone into my MacBook and it shut down. How do I get it to work again

I plugged an android phone into my MacBook and it shut down. How do I get it to work again

I've no idea what happened - but it sounds as if plugging in the phone has fried the logic board. The best thing that I can recommend is that you take the machine to your local Apple Store/AASP and have them diagnose the problem.
At this point, there's simply nothing else that you can attempt.
Sorry,
Clinton

Cant get Frontrow to work after installing 10.4.3 and updating it

I made a terrible mistake today and moved all my files from my harddisk to my external harddisk. I had to reinstall everything but I cant get frontrow to work properly. I cant find it on my external harddisk either.
Can someone please help me with this tricky question.

Winbo:
Can you describe your problem in a bit more detail? Why did you decide to move your files? What files did you move? What method did you use to move them? Did you move them over completely by way of backing up and then erased your disk prior to moving them back?
Any other information you can provide will make it easier to make suggestions on your issue.
Good luck.
cornelius
PismoG4 550, 100GB 5400 Toshiba internal, 1 GB RAM; Pismo 500 OS X (10.4.5) Mac OS X (10.4.5) Beige G3 OS 8.6

Ableton and logic express 7.2 with rewire, cant get it to work

Similar Messages

Maybe you are looking for