Ableton Live 9 and Logic Pro 8 - rewire

Hello.
I try to rewire Live Intro 9 to Logic Pro 8.
As in the picture here:
...but I can't see Live there. I have just Sibelius7 as rewire.
What is wrong?

Hi
The Art Of Sound wrote:
Quit both Logic 9 and Live 9
The OP is running Logic 8 (see subject title).
octoechos wrote:
I have Live in 64 bit.
I'm not convinced that running Live 9 in 64 bit will work with Logic 8 (which is 32 bit only). Live 9 32 bit does Rewire with Logic 8 fine here.
Open Live 9 32 bit mode to install all it's Rewire stuff, close it, then open Logic 8. Start Live 32bit version and you should be good to go.
CCT

Similar Messages

No sound when rewiring ableton live and logic 8

my setup:
MacBook Pro 15"
Intel Core 2 Duo
2.33 GHz
Single Processor
2 Cores
L2 Cache (per processor): 4 MB
2 GB RAM
Bus: 667 MHz
what i'm doing:
i start logic 8.0.1
then i start ableton live 7.0.1 and load a test song with an audio loop in it
in logic, i make a new track, logic clearly shows that rewire tracls from ableton live are available (looks like this:)
http://thumpmonks.com/jams/newtrack.png
i hit play in logic, the song starts in both logic and live, the meters in live show audio activity, but there's no sound in logic.
the channel in logic reads bus 33:
(looks like this)
http://thumpmonks.com/jams/track.png
I turn input monitoring off/on. no change. i make the track stereo, still nothing.
to make sure im not crazy i make an audio instrument in logic using evb3, or evp88, whatever and i hear it just fine.
in live ive tried everything: directly routing the active audio track to the Rewire output, routing the master output to a different bus and matching that bus in logic.
no sound. anyone?
Message was edited by: Brian Gocher

Hi
May be - Full HD - is Your problem.
There should be a minimum of 25GB free on start-up hard disk.
Yours Bengt W

I recently upgraded to a G5 and Logic Pro 8. My previous system was a Power Mac 7200 with Logic Platinum 3.5.3. I can not open the old song files unless they are first saved in Logic 6 or 7. Where do I get a dongle for Logic 7?

I recently upgraded to a G5 and Logic Pro 8. My previous system was a Power Mac 7200 with Logic Platinum 3.5.3. I can not open the old song files unless they are first saved in Logic 6 or 7. Where do I get a dongle for Logic 7?

eBay or Craigslist would be the only choice.

Hello,i have a retina with Mountain Lion.I have logic PRO 7 and logic Pro 8 ,with G5.I can't use the CD with the retina!!It's not a powerpC!!How do i install Logic Studio 8 with Mountain Lion successfully ?too évolution Logic PRO 9?

Hello,i have a retina with Mountain Lion.I have logic PRO 7 and logic Pro 8 ,with G5.I can't use the CD with the retina!!It's not a powerpC!!How do i install Logic Studio 8 with Mountain Lion successfully ?too évolution Logic PRO 9?

The installer for Logic Pro 8 has a bug which keeps it from operating in Lion or Mt. Lion. Use the program Pacifist to install it.

HT4561 I have an iMac (2.66Ghz Intel Core 2 Duo) and recently updated to OSX10.6.8. At first things worked as before, but suddenly a bunch of applications are not working; including videos wont play in any browser, plus Skype and Logic Pro won't work

Recently updated to osx10.6.8. Was fine at first, but now have problems with various applications freezing/hanging.
These include Skype and Logic Pro.
In addition, cannot play videos (including YouTube and BBC) on Firefox (my usual browser), Safari or Chrome.
Application becomes frozen, and I eventually get an 'unresponsive script' message.
With Firefox I have tried clearing the cache. My Flash is upto date.
These are all the apps I use everyday, and this is driving me crazy. Can't seem to find answers on line. Very grateful for any help or advice.

Please download this app ... etrecheck, run it, copy or paste the results and post them back to us here.
From that we may be able to see more background to your problem. Be assured, it is safe.
Etresoft: EtreCheck

I installed Lion OS X and Logic Pro won't run. I downloaded the 9.1.5 update: "An Eligible Logic Pro Version Was Not Found in the Applications Folder. This Update require Logic Pro Version 9.0 or higher". I have Logic Pro Version 9.1.1 installed.

I installed Lion OS X and Logic Pro won't run. I downloaded the 9.1.5 update: "An Eligible Logic Pro Version Was Not Found in the Applications Folder. This Update require Logic Pro Version 9.0 or higher". I have Logic Pro Version 9.1.1 installed.
I even pulled the dmg file into the Logic Studio folder in my applications directory and it still does not recognize it. What do I do now?

Niel: Thanks.
For others benefit, here is what happened.
I had installed Logic Studio 9.1 some time ago.......not knowing what all the programs were nor what they did, I created a "Logic Studio" subfolder in my applications folder and put all Logic Studio programs into it so I'd know where they were and could review each at my leisure over time.
My assumption now is that when the updater looks for the Logic Pro program, it looks only in the applications folder. It seems lame that it would not also look in the subfolders of the applications folder, but that apparently IS the way it works. Because my Logic Pro program was located in the "Logic Studio" subfolder, the updater just didn't see it..hence the error message I received when I tried to update.
Solution: I moved all the Logic Studio programs out of the subfolder and now they reside in the applications folder. Ran the 9.1.5 updater and it worked like a charm.

Hi, ive been having trouble passing my logic sessions to another computer, we're both using a macbook pro 10.6.8 and logic pro 9 with the same plugins, the session opens in the other computer but all the synths reset to presets

Hi, ive been having trouble passing my logic sessions to another computer, we're both using a macbook pro 10.6.8 and logic pro 9 with the same plugins (native instruments komplete 7), the session opens in the other computer but all the synths reset to presets, this didnt happen the first time I shared a session, but its been happening lately quite often

kwmlr439 wrote:
CSOUND Read the title please:
Re: Macbook Pro 10.6.8 RAM Upgarde to 8 GB
The amount of RAM is not dependant on the operating system. It is all about the model of you Mac.
10.6.8 is the version of OS X that is installed on your system. It has no real baring on the amount of RAM that CAN be installed.
Personally I have never had good luck with Corsair RAM. I have always had good luck with Crucial and Kingston.
Message was edited by: Shootist007
Message was edited by: Shootist007

Can you run Logic Pro 8 and Logic Pro X on the same machine?

Hello all!
Congratulations to us on the release of the new Logic Pro!
I am still running Logic Pro 8 (and was waiting for X to come out since I knew it wasn't too far off) but am concerned over the loss of 32-bit plug-ins with Logic Pro X (the wrapping of my old VST plug-ins alone hurts!). I've heard that installing Logic Pro X doesn't in any way gimp Logic Pro 9's usage, but can someone confirm whether or not Logic Pro X and Logic Pro 8 can operate in harmony on the same Mac?
As a bonus, is there any reason to believe that Apple would disable earlier versions of Logic Pro (such as version 8) from running on Mavericks?
I am planning my Logic Pro and Mac OS migrations! Thanks!!

Try here:
https://discussions.apple.com/community/professional_applications/logic_pro
This forum is FCP X.
Al

External piano and Logic Pro

Hello
I have Logic Pro 9 and external keyboard KORG SP250
I can play the keyboard and Logic Pro can record what I play from keyboard, it will play back as well, but it will use the speaker from the keyboard for output.
I dont know how to redirect to the speaker of my computer
Thanks in advance everyone
TA

You understand that MIDI is not audio (sound), it's only a simple set of instructions that describe the MIDI performance. It (MIDI) can be routed to and sound producing keyboard, module , virtual instrument... etc.
In any case, you have it routed back to your keyboard so natually tha sound will come out of the keyboard, it's the keyboard that is producing the audio. If you want the sound to come out of the computer the audio outs of the keyboard have to be routed to the audio inputs of your sound card, an audio track selected, software monitoring enabled and the track record enabled. (that's one way)
You could also create an instrument track, load a virtual instrument and slide the MIDI performance over to the virtual instrument track.
If you're unsure of the terminology I'm using you might want to ge here and read:
Exploring Logic Pro.
http://documentation.apple.com/en/logicpro/

2012 MacBook Air running Photoshop and Logic Pro

Looking to buy a laptop. The most I do with my current iMac is record music using logic pro, edit video in iMovie and edit photos in photoshop.
I'm planning on travelling for a decent length of time and would like to continue to do this on a laptop.
The weight and SSD of the macbook air are really appealing to me. I'm wondering if it will be able to perform the above tasks? I read some reviews of people using photoshop on a 2011 macbook air with no issues, and from what I understand, the cheapest 2012 macbook air 13' is faster then the ultimate macbook air of 2011?
So I'm considering purchasing a 2012 MacBook air 13' with the 1.8GHz dual-core Intel Core i5 and upgrading the RAM from 4gb to 8gb.
Will this be able to meet my needs? I say I will be editing photos and recording music with it, but I'm still really amateur and I'm sure my needs are also.

Thanks for the reply DWB,
USB should be fine as far as I can see. Is there a firewire adaptor just in case?
I was planning on keeping an external drive, and if I wanted to edit any substantial amount of footage, transfer it from the external drive to the MBA hardrive then just edit it from there.
The main thing I'm wondering about is wheter or not the applications photoshop CS6, imovie (maybe even final cut pro?) and logic pro will run smoothly on a 2012 13-inch 1.8GHv i5 macbook air with 8gb ram.

Hello, i have MainStage 2 and Logic Pro and want to upgrade.

Do I have to pay full price for both of them again?
Thanks!!

Hi
If you want to get MainStage 3 and Logic Pro X, you have to buy them from the AppStore at full price.
CCT

M-Audio Fast Track USB and Logic Pro X

I wanted to share this tip in case anyone else has the same issue I had.
I attempted to use the Fast Track USB audio interface with Logic Pro X. It had worked in every version of Garageband since version 3, as well as older versions of Logic Express and Logic Pro, so I assumed it would work out of the box with Logic Pro X.
With it plugged in correctly, and my guitar connected to it, I added a new audio track to my project - ensuring the Fast Track was set as the input device, and input 2 was selected (input 1 is the XLR input on the device) - and enabled playback monitoring. There was no sound. Additionally, the button to enable recording was not present for the track. The same was true for every new track I added that used the Fast Track as the input device.
I tried everything: in Logic Pro X > Preferences > Audio > Devices, I toggled between the built-in input and the Fast Track; I restarted the software; I unplugged and plugged in the Fast Track, and I restarted the system. None of these worked. Then I had an idea.
In the Applications > Utilities folder on my Mac, I opened the Audio MIDI Setup app. This opened the Audio Devices window. I clicked on the plus at the bottom left and chose to Create Aggregate Device. I named this device by double-clicking the name on the left, then on the right I checked Built-in Input and Fast Track, taking note of which inputs belonged to the Fast Track in this new device (for me, inputs 3 and 4).
After restarting Logic Pro X, I chose this new aggregate device as my input device, chose input 4 for recording, and suddenly everything worked correctly.

I contacted Logic Pro X support and they said that they are working on an update. They were very helpful, so no worries guys. They know that there is an issue and they are working on it A.S.A.P. They told me if I needed to continue production to use time machine and go back before the update and restore Logic Pro X (before 10.0.5).
They understand, so give them a break... They are working as fast and hard as they can. I talked with one of the programmers directily. They are probably not getting any sleep over this.

New mac and logic pro 9

Last week my old G5 died and I,m looking at getting a new mac and logic pro 9.
My G5 had logic pro 7 and 8 installed on it. I was wondering do I need to install
those back on my new mac so I can upgrade to logic 9 or could I just install logic 9 on my new computer. I have the key that came with logic 7 and that's what I used to install logic 8 with. I really don't want to put those on my new computer. Also will logic 9 load my logic 8 songs.
Thanks for your help,
Chuck Floyd

Chuck Floyd1 wrote:
Last week my old G5 died and I,m looking at getting a new mac and logic pro 9.
My G5 had logic pro 7 and 8 installed on it. I was wondering do I need to install those back on my new mac so I can upgrade to logic 9
No.
or could I just install logic 9 on my new computer.
Yes.
I have the key that came with logic 7 and that's what I used to install logic 8 with. I really don't want to put those on my new computer.
Why not? You could install just the apps, they do not take much space and you know for sure you can always open your old projects.
Also will logic 9 load my logic 8 songs.
In principle, yes. But it can vary, depending on what you use(d) in those L8 projects (environment alterations, 3rd party plugins etc etc). If they won't load, use L8. I'ld advise you to install both L7 and L8, just in case. Just skip the samplecontent etc on both installs, do only the apps themselves.
regards, Erik.

Is there a difference between Logic Pro and Logic Pro X?

Maybe this is a stupid question, but is there a difference between Logic Pro and Logic Pro X?
Already thx!

Hi
Short answer: No
Longer answer:
Logic Pro X is the latest release version of the DAw known as "Logic Pro". Previous versions were: Logic Pro 9, Logic Pro 8 etc.
There was also a "Logic Express" (no longer available) which, though similar to Logic Pro, was missing a few features of Logic Pro in it's later versions)
This might add more details:
http://en.wikipedia.org/wiki/Logic_Pro
CCT
edit
AoS wrote similarly
There you go then :-)

Rewire with Ableton Live 8 and Logic Pro 9

Hi guys,
I'm really hoping that somebody can help me with (sorry) a Rewire problem...I am close to tearing my hair out.
I'm trying to Rewire Logic Pro 9 and Ableton Live 8. Before you ask I am using 32-bit Logic, and I am opening up Logic first, then Ableton but I can't seem to get the Ableton Live Rewire channels to appear in the Logic library.
Please help if you can, I'm going steadily insane. Such a waste of my time having to sort this rubbish out.
Cheers!

Hi
Did you run Live without Logic running to get Live to install the necessary Rewire bits and pieces?
You will then need to quit, Live, start Logic start Live.
CCT

Ableton Live 9 and Logic Pro 8 - rewire

Similar Messages

Maybe you are looking for