Abnormal "% system ASP used" growth when running SAP   after V5R4 upgrade

Dear friends,
apparently again issues with the V5R4 upgrade. Let me summarize:
upgraded sucessfully from V5R3 to V5R4
II14126 successfully applied (8 October 2007)
no problems running SAP at all (we run multiple instances with 46C and 47, so kernel 46C 2341 and kernel 640 174)
When the instances are running, we see an abnormal (too fast!) storage consumption, never seen anything similiar before... the journals are ok, we checked them all, also the non-SAP ones...
Any idea/suggestion will be sincerely appreciated.
Franco.

Volker,
we went EXT since long ago, we had no issues until we ran V5R3, now we're in V5R4, last apar II14126 as of Oct 8, kernel EXT 2341 on CI and windows application servers and we're definitivelly in troubles !
The strange thing is that we have another identical iSeries, same kernels, same V5R4 tough wih an older ***, no problems on that iSeries.
No useful suggestions from IBM and SAP so far.
IBM asked us to load also the following PTFs :
SI28671
MF42522
SI25219
we did it, no luck, nothing changed... the tempstorage is increasing at an avg speed of 10Gb per hour.
I've found some old threads in the saponiseries group, here a couple of workaround were suggested :
Note 182207 - DB2/390: Improving Virtual Storage Utilization
Note 101717 - Automatic restart of SAP R/3 work processes
See also http://tech.groups.yahoo.com/group/SAPoniSeries/message/39
Do you think we can adopt this temporary workaround ?
Franco.

Similar Messages

  • What can I use my Droid Charge for, after I upgrade to the new Samsung Galaxy S2 for VZW on Sept 8?

    what can I use my Droid Charge for, after I upgrade to the new Samsung Galaxy S2 for Verizon on September 8?
    I guess it can run fine on Wi-Fi and become a media player.... or is there a market for 1-month-old Droid Charge phones?
    How much trade-in value can I get from VZW or BestBuy or Amazon?
    Thanks!

    http://www.droid-life.com/2011/08/03/leaked-verizon-roadmap-reveals-potential-launch-dates-for-stratosphere-vigor-bionic-and-more/
    DROID Bionic:  (9/8 launch) – You already know everything about this device, don’t you?
    Samsung Stratosphere:  (9/8 launch) – 4G LTE device running Android 2.3
    HTC Vigor:  (10/6 launch) – Will replace the HTC Thunderbolt
    LG Revolution 2:  (10/20 launch) – Will replace the original Revolution
    Samsung Galaxy Tab P8 (November launch) – Could be the 8.9″ Galaxy Tab?
    Samsung Illusion:  (9/29 launch) – 3G smartphone running Android 2.3
    Samsung Plato:  (January launch) – whatever it is, it was pushed to 2012
    HTC Bliss:  (9/29 launch) – Lower end Android 2.3 device; the chick phone?
    Motorola XOOM 4G LTE:  (9/8 launch) – Assuming this is the date that the 4G LTE upgrade starts. Also when the 4G LTE version will be in stores.

  • How do I fix aLaCie Backup Drive that runs constantly after Maverick upgrade

    LaCie backup drive for time machine runs constaantly after Maverick upgrade.  This is using resources and slows the processor

    After installing Mavericks on my one year old iMac (loaded) Time Machine failed (Pegasus Promise Thunderbolt 3TB).  I tried unmounting it, didn't work.  Rebooted: Time Machine failed again [Time Machine couldn’t complete the backup to “Time Machine”. Unable to complete backup. An error occurred while creating the backup folder.] was the only message. Had to reboot to get Pegusus accessible again.  Tried re-intalling Maverick (old Microsoft thing... reintall the OS).  Didin't do anything for Time Machine, same failure.  Booted into safe mode: nothing, same probelm.  Repaired permissions: no joy there either.  So, now have no Time Machine backups at all. And Time Machine won't work with the Pegasus. [same error message after 30 min or so every time].  ordinary file saves work fine though.
    Ideas please?

  • Why can't I use effects on camera even after I upgraded to 5.1?

    Why can't I use effects on camera even after I upgraded to 5.1?

    What effects are you referring to?

  • Internet and applications using the Internet keep crashing after IOS5 upgrade on the iPod Touch 4th generation. Any suggestion on how to solve?

    Internet and applications using the Internet keep crashing after IOS5 upgrade on the iPod Touch 4th generation. Any suggestion on how to prevent the it?

    Try:
    http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
    fix for Home button
    iPhone Home Button Not Working or Unresponsive? Try This Fix
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    You can do it an an Apple store by:
    Apple Retail Store - Genius Bar
    or sent it in to Apple. See:
    Apple - Support - iPod - Service FAQ
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • N8 run slow after Anna upgrade

    After Anna upgrade, the operation of my phone (N8) run slower generally.  I am not sure I can specify few, for example, openning Photos, taking picture, working with worksheet, etc.  Any solution to help pushing the speed back up?

    All I can suggest is to reset the phone ! It's a pain and involves time and effort, but you can get conflict between new and old software, and a clean install always gives better results, Anna is quick and smooth on my E7 and I'm enjiying it, but I did do a reset. Back up your Contacts , Calendar and Notes ONLY (a full backup and restore will restore any conflict !!) then dial *#7370# followed by 12345 if required, then re-install Anna using Nokia Suite beta 
    http://betalabs.nokia.com/apps/nokia-suite-beta?re​q=true
    Including Anna 1/2 & 2/2 , then set up your phone manually, you should see some great improvement 
    Good Luck
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

  • Mac Mini fan running loudly after Safari upgrade

    Mac Mini 2GHz is around 2 months old. All been fine until yesterday. When running Safari (it seems) and not necessarily heavy usage fan starts runningvery loudly. In the previous 2 months NEVER heard the fan or at least it's been very quiet, so am quite concerned. It appears that this has coincided with updating to the very latest Safari release 3.1.1.
    Anyone else having similar problem and/or advice?
    thanks
    D

    The new Safari release supposedly has some issues with Flash media files and with Windows Media files -- and will require updates of the helper programs that display those formats.
    Does the fan run loudly when you visit sites with such files? Or does it also run loudly if all you visit is sites with no video files on them?

  • Error when running Tomcat after reboot the system

    when i first install the tomcat without reboot the system (win2k), it start the tomcat without any error message and i also able to view jsp page. but when i reboot the system and try to start tomcat i receive this kind of error message
    Catalina.start: LifecycleException: null.open: java.net.BindException: Address
    in use: JVM_Bind
    LifecycleException: null.open: java.net.BindException: Address in use: JVM_Bin
    d
    at org.apache.catalina.connector.http.HttpConnector.initialize(HttpConne
    ctor.java:1116)
    at org.apache.catalina.core.StandardService.initialize(StandardService.j
    ava:454)
    at org.apache.catalina.core.StandardServer.initialize(StandardServer.jav
    a:552)
    at org.apache.catalina.startup.Catalina.start(Catalina.java:775)
    at org.apache.catalina.startup.Catalina.execute(Catalina.java:681)
    at org.apache.catalina.startup.Catalina.process(Catalina.java:179)
    at java.lang.reflect.Method.invoke(Native Method)
    at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:243)
    ----- Root Cause -----
    java.net.BindException: Address in use: JVM_Bind
    at java.net.PlainSocketImpl.socketBind(Native Method)
    at java.net.PlainSocketImpl.bind(Unknown Source)
    at java.net.ServerSocket.<init>(Unknown Source)
    at java.net.ServerSocket.<init>(Unknown Source)
    at org.apache.catalina.net.DefaultServerSocketFactory.createSocket(Defau
    ltServerSocketFactory.java:118)
    at org.apache.catalina.connector.http.HttpConnector.open(HttpConnector.j
    ava:946)
    at org.apache.catalina.connector.http.HttpConnector.initialize(HttpConne
    ctor.java:1114)
    at org.apache.catalina.core.StandardService.initialize(StandardService.j
    ava:454)
    at org.apache.catalina.core.StandardServer.initialize(StandardServer.jav
    a:552)
    at org.apache.catalina.startup.Catalina.start(Catalina.java:775)
    at org.apache.catalina.startup.Catalina.execute(Catalina.java:681)
    at org.apache.catalina.startup.Catalina.process(Catalina.java:179)
    at java.lang.reflect.Method.invoke(Native Method)
    at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:243)
    i already set the JAVA_HOME and CATALINA_HOME as following:
    JAVA_HOME
    e:\jdk1.3.1_02\bin
    CATALINA_HOME
    e:\Apache Tomcat 4.0
    is anyone can help me to solve this problem? thanks!

    Although i'm not too familiar with Tomcat, i'm pretty sure this is because something else is already using that port. Try changing the port to something different maybe?
    Also, there's a possibility that Tomcat is already started as a service in win2k. Check your services for something like Apache Tomcat to see if it's starting the service automatically.
    These are really just educated guesses, but worth a try maybe.

  • SYSTEM ERROR 1312 OCCURING WHEN RUNNING NET LOCALGROUP FROM REMOTE MACHINE

    while running workflow through AO am connecting to server 2008 r2 and running net localgroup command.the output is :
    <line index="1">Copyright 2010 BMC Software Ltd, Version: 1.5 </line>
    <line index="2">Connecting to remote service...</line>
    <line index="3">Connected to remote host.</line>
    <line index="4">System error 1312 has occurred.</line>
    <line index="5">A specified logon session does not exist. It may already have been terminated.</line>
    <line index="6">Remote application exited with code: 2 </line>

    Hi,
    Have a look:
    http://blogs.technet.com/b/askperf/archive/2012/04/18/task-scheduler-error-a-specified-logon-session-does-not-exist.aspx
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/a7853ac3-6c48-4615-896a-e306067ab804/net-use-via-powershell-returning-a-specified-logon-session-does-not-exist-it-may-already-have-been?forum=winserversecurity
    Regards,
    Rafic
    If you found this post helpful, please give it a "Helpful" vote.
    If it answered your question, remember to mark it as an "Answer".
    This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

  • No sound when running Windows, after installing Windows 7 Ultimate 64 bit-Macbook Pro

    As the title states I can't get any sound, no matter what configuration I try, when I run Windows. I used the latest version of Lion and the latest version of Bootcamp when installing Windows 7 via bootcamp. I have completed all available Windows updates as well, and still no luck. Mac side, the sound works perfectly. I've been online for hours searching for a solution and I'm running short on possible solutions and patience. So any help or suggestions are would be helpful and greatly appreciated.
    Thank you!

    I don't think anyone is "peaved". Your same question is asked and answered very frequently here. We are just users like you and sometimes it gets old providing the same answers over and over when the answer is readily available using the search box located upper right.
    Here are some search results to help you in your quest.
    https://discussions.apple.com/community/windows_software/search.jspa?peopleEnabl ed=true&userID=&containerType=&container=&spotlight=true&q=cirrus

  • Red X on Network drives and Unknown Publisher when running apps after VLAN config

    We have been running the SG500-52P switches (2 switches stacked) for 2 years with No issues. We recently moved our office and added a new VoIP phone system. We had some trouble getting everything installed originally but its all working now with this one pesky problem. After putting the switches in Layer 3 mode, adding a VLAN for the phone system and setting up a route between VLAN1 (data) and VLAN2 (phones). We are now having this problem: Users are randomly getting Red X's showing disconnected network drives. There appears to be no pattern to when the disconnect happens. It can happen almost instantly after a reboot or sometimes be fine for a few days before disconnecting.  If you click on the drives you can access the data but the Red X DOES NOT go away. Although when accessing some applications we get an "Unknown Publisher" message and usually the program crashes. All our Workstations are Win 7 Pro and Servers are 2008 R2. We map server and NAS drives, when the issue happens is disconnects all the mapped drives and NOT just one server.

    Definitely not a good situation to be in, as you never know who will call and complain of loosing connectivity.  Have you opened a ticket with TAC?
    Unfortunately we don't get a lot of comments/questions on the SG series here.

  • "ORA-12222 TNS no such protocol adapter" When running Forms after installing Portal

    We have a Forms 6i (web) application running on 9iAS. This worked fine. But after installing Portal on the same 9iAS, we got the following error when starting the WebForms application:
    ORA-12222 TNS no such protocol adapter
    Who knows a solution?
    Configuration
    9IAS v1.0.2.2
    8.1.7
    Form 6i Patch 10
    Windows NT
    Best regards,
    Harm van Zoest

    This is s SQLNET error.
    You can search for it on OTN using the search button.
    IT usually means that the tnsnames.ora file was changed. Or that you are now using another tnsnames.ora.

  • Noip2 can't get my IP when run automatically after booting

    I'm trying to set up a VPN and I use the noip.com service. I use the "noip" package to update my hosts.
    If I run it manually with systemctl start noip2, it works fine and my host is updated properly.
    If I set it to be run after booting with systemctl enable noip2, it doesn't work and gets caught in an endless loop that looks like this:
    Mar 28 19:44:07 eee systemd[1]: Started No-IP Dynamic DNS Update Client.
    Mar 28 19:44:07 eee noip2[154]: v2.1.9 daemon started with NAT enabled
    Mar 28 19:44:07 eee noip2[154]: Can't gethostbyname for dynupdate.no-ip.com
    Mar 28 19:44:07 eee noip2[154]: Can't get our visible IP address from ip1.dynupdate.no-ip.com
    Mar 28 19:49:07 eee noip2[154]: Can't gethostbyname for dynupdate.no-ip.com
    Mar 28 19:49:07 eee noip2[154]: Can't get our visible IP address from ip1.dynupdate.no-ip.com
    I suspect this is because the network isn't ready by the time the noip2 service is launched, so it can't resolve the updater domain name. However, I don't understand why, after five minutes, it still can't resolve this domain name. I can ping it just fine.
    Any ideas are more than welcome

    Okay, so how are you starting your internets?  Is it with a wired conenction, or wireless?  Netcfg, dhcpcd, NetworkManager, wicd, do you send carrier pidgeons back and forth? 
    If it requires that you have an active connection when it starts, maybe you should try using NetworkManager's service that waits until it is online before it notifies (creatively named NetworkManager-wait-online.service).  I think that what this does is it delays the completion of the network.target until after this service starts.  So if you have noip.service be "After=network.target" then the IP should be resolved and ready to go.

  • ORA-00942 when running application after import

    APEX 4.1.1
    Hi,
    I transferred my application via export/import to our production database. I got no errors during installation, but when I run the application I am getting the following error message.
    User not found
    ORA-00942: table or view does not exist
    Technical Info (only visible for developers)
        is_internal_error: true
        ora_sqlcode: -942
        ora_sqlerrm: ORA-00942: table or view does not exist
        component.type: APEX_APPLICATION_COMPUTATIONS
        component.id: 3102806535980644
        component.name: LANG
        error_backtrace:
        ORA-06512: at "SYS.DBMS_SYS_SQL", line 1325
        ORA-06512: at "SYS.WWV_DBMS_SQL", line 1287
        ORA-06512: at "SYS.WWV_DBMS_SQL", line 1358
        ORA-06512: at "SYS.WWV_DBMS_SQL", line 1375
        ORA-06512: at "APEX_040100.WWV_FLOW_DYNAMIC_EXEC", line 776
        ORA-06512: at "APEX_040100.WWV_FLOW", line 4155I do not know, where to look for the error. I do have an application item with the name LANG and there is an application computation for LANG:
    SELECT  LANG_CODE
    FROM    GPS_WEB_USERS
    WHERE user_name = upper('&APP_USER.')Any Hints where to look?
    Edited by: Anne-Marie Rosa on Aug 16, 2012 5:37 AM
    Edited by: Anne-Marie Rosa on Aug 16, 2012 6:32 AM

    Hi,
    >
    I transferred my application via export/import to our production database. I got no errors during installation, but when I run the application I am getting the following error message.
    User not found
    ORA-00942: table or view does not exist
    Technical Info (only visible for developers)
    is_internal_error: true
    ora_sqlcode: -942
    ora_sqlerrm: ORA-00942: table or view does not exist
    component.type: APEX_APPLICATION_COMPUTATIONS
    component.id: 3102806535980644
    component.name: LANG
    error_backtrace:
    ORA-06512: at "SYS.DBMS_SYS_SQL", line 1325
    ORA-06512: at "SYS.WWV_DBMS_SQL", line 1287
    ORA-06512: at "SYS.WWV_DBMS_SQL", line 1358
    ORA-06512: at "SYS.WWV_DBMS_SQL", line 1375
    ORA-06512: at "APEX_040100.WWV_FLOW_DYNAMIC_EXEC", line 776
    ORA-06512: at "APEX_040100.WWV_FLOW", line 4155I do not know, where to look for the error. I do have an application item with the name LANG and there is an application computation for LANG:
    SELECT LANG_CODE
    FROM GPS_WEB_USERS
    WHERE user_name = upper('&APP_USER.')The source of the error is ora_sqlerrm: ORA-00942: table or view does not exist
    Look for the name of the Application Computation in APEX_APPLICATION_COMPUTATIONS APEX View using component.id: 3102806535980644 to find its name.
    Once you have the name you can edit that App Comp and figure out which Table/View is not accessible.
    Cheers,
    PS: &#123;code&#125; is the tag, lower case.
    Edited by: Prabodh on Aug 16, 2012 6:01 PM

  • Java.lang.NoClassDefFoundError when running DBCA after fresh install

    Hello there.
    I have just installed Oracle 9i on a new server, since we are moving our database server from one machine to the other, and after going through the installation without any problems DBCA was going to run but I have got the following error message:
    Exception in thread "main" java.lang.NoClassDefFoundError: oracle/help/Help
    at oracle.sysman.assistants.dbca.ui.UIHost.initializeHelp(UIHost.java:24
    5)
    at oracle.sysman.assistants.dbca.ui.UIHost.initialize(UIHost.java:228)
    at oracle.sysman.assistants.dbca.Dbca.execute(Dbca.java:96)
    at oracle.sysman.assistants.dbca.Dbca.main(Dbca.java:161)
    I have checked the CLASSPATH, which currently is:
    "C:\Program Files\Oracle\jre\1.1.8\lib\rt.jar;C:\Program Files\Oracle\jre\1.1.8\lib\i18n.jar;%ORACLE_HOME%\assistants\dbca\jlib\dbca.jar;%ORACLE_HOME%\assistants\jlib\assistantsCommon.jar;%ORACLE_HOME%\jlib\ewt3.jar;%ORACLE_HOME%\jlib\ewtcompat-3_3_15.jar;%ORACLE_HOME%\jlib\share.jar;%ORACLE_HOME%\jlib\swingall-1_1_1.jar;%ORACLE_HOME%\jlib\oracle_ice5.jar;%ORACLE_HOME%\jlib\help3.jar;%ORACLE_HOME%\jlib\kodiak.jar;%ORACLE_HOME%\lib\xmlparserv2.jar;%ORACLE_HOME%\jlib\gss-1_1.zip;%ORACLE_HOME%\classes;%ORACLE_HOME%\jlib\oembase-9_2_0.jar;%ORACLE_HOME%\jlib\srvm.jar;%ORACLE_HOME%\jdbc\lib\classes111.zip;%ORACLE_HOME%\jlib\netcfg.jar;%ORACLE_HOME%\lib\vbjorb.jar;%ORACLE_HOME%\lib\vbjtools.jar;%ORACLE_HOME%\lib\vbjapp.jar;%ORACLE_OEM_CLASSPATH%"
    If you could please help I would appreciate it.
    Kind regards.

    Hello, rajeysh.
    Thank you for your reply, I have tried this method but it did not work, the problem remains the same.
    Please notice that with the reference you've quoted the error is java.lang.NoClassDefFoundError: oracle/sysman/emSDK/common/nls/MessageBundle while mine reports the error java.lang.NoClassDefFoundError: oracle/help/Help.
    So, if you have any other ideas I would appreciate it.
    Kind regards.

Maybe you are looking for