Abode XI and Windows 8.1 not compatible

Every time I work with a PDF in Adobe XI (11.0.03) with Windows 8.1 I get a "not responding" message and the screen freezes.  I have already disabled protected mode as advised in the forum, but that didn't work.  Any fixes?

if you have NVIDIA driver, please try upgrading it via below link
http://windows.microsoft.com/en-us/windows/update-driver-hardware-isnt -working-properly#update-driver-hardware-isnt-working-properly=windows -7
Else try this
1. Go to Reader folder
2. Double click on Eula.exe
3. Accept license agreement
4. Then launch Reader
Please let us know if you still see the issue.

Similar Messages

  • L420 and Windows 8 Defender not compatible?

    Althougth Lenovo claims that the L420 is Windows 8 compatible, MS Defender slows down Windows Explorer extremely. Drive ICONs take a long time to show up. When I switch off Defender, every things comes up quickly.
    I have switched to AVAST! Free and everything seems to work just fine, although AVAST is works-in-progess at this time. 

    if you have NVIDIA driver, please try upgrading it via below link
    http://windows.microsoft.com/en-us/windows/update-driver-hardware-isnt -working-properly#update-driver-hardware-isnt-working-properly=windows -7
    Else try this
    1. Go to Reader folder
    2. Double click on Eula.exe
    3. Accept license agreement
    4. Then launch Reader
    Please let us know if you still see the issue.

  • Hyper-v cannot be installed: A hypervisor is already running: VMware Workstation and Hyper-v are not compatible. Remove the Hyper-V role from the system before running Vmware Workstation

    When I try to go to Control Panel\Programs and click on turn windows features on/off and , it shows ticks on hyper-v is removed.
    Hyper-v platform Is grayed out and When i move the mouse point to  Hyper-v platform it shows a message.
    "Hyper-v cannot be installed: A  hypervisor is already running"
    When I try to install vmware it says..
    VMware Workstation and Hyper-v are not compatible. Remove the Hyper-V role from the system before running Vmware Workstation..

    I dont feel you can do this. I have also tried what you tried and ended up with a failure.. So had to stick with vmware in one instance and for other instance hyper v... 
    For further details raise your question here http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverhyperv
    and
    https://communities.vmware.com/community/vmtn/developer/forums
    Good luck.. 

  • I accidentally changed a setting so every time I open a jpeg photo, adobe reader pops up and says it's not compatible.  I just want to be able to open a jpeg normally and not have adobe open.

    I accidentally changed a setting so every time I open a jpeg photo, adobe reader pops up and says it's not compatible.  I just want to be able to open a jpeg normally and not have adobe open.

    Hi Lhughes0,
    Try these steps:
    1. Select the .jpeg file
    2. Right click on that  file and on context menu go to the last option which says "Properties"
    3. Now you will see the option where you change the program to use for opening your file
    4. Instead of Adobe Reader select Windows Photo there.
    5. Apply and say OK to it
    Give it a try

  • The product version and database version are not compatible

    The following simple program gets an exception {The product version and database version are not compatible} its very hard to proceed from here. Does anybody know what cause this?  
    Best Regards
    Jan Isacsson
    using System.Collections.ObjectModel;
    using Microsoft.MasterDataServices.Deployment;
    using Microsoft.MasterDataServices.Services.DataContracts;
    namespace MdsDeploy
        class Program
            static void Main(string[] args)
                try
                    ModelReader reader = new ModelReader();
                    Collection<Identifier> models = reader.GetModels();
                    foreach (Identifier modelId in models)
                        Console.WriteLine(modelId.Name);
                catch (System.Exception ex)
                    Console.WriteLine("Error: " + ex.Message);
                Console.ReadKey();

    Hi Jan,
    For the error "The product version and database version are not compatible", as Emma said, the version number of the Service does not match the database schema version.
    In your scenario, which version of database are you using? Please note that MDS update required after SQL 2012 SP1 installation, please refer to the links below to see the details.
    http://byobi.com/blog/2012/11/mds-update-required-after-sql-2012-sp1-installation/
    http://msdn.microsoft.com/en-IN/library/gg488708.aspx
    Regards,
    Charlie Liao
    TechNet Community Support

  • Structure of table and work area are not compatible - table control wizard

    Structure of table and work area are not compatible is the error i am getting when specifying my internal table and work area in my table control?  What am I doing wrong?

    hii
    this error comes when you have different structure of work area then internal table..so work area will not work here and you will not be able to append records in internal table.
    check strucure of internal table and work area.it should be like below.
    TYPES:
      BEGIN OF type_s_kna1,
         kunnr LIKE kna1-kunnr,            " Customer Number
         name1 LIKE kna1-name1,            " Name
         vbeln LIKE vbap-vbeln,            " Sales Document
      END OF type_s_kna1.
    * Internal Table And Work Area Declarations For Customer Details      *
      DATA : t_kna1 TYPE STANDARD TABLE OF type_s_kna1,
             fs_kna1 TYPE type_s_kna1.
    regards
    twinkal

  • I have just downloaded adobe photoshop elements 13 on a vista laptop and realised it is not compatible.will i be able to download it again  on another computer?

    I  have just downloaded adobe photoshop elements 13 on a vista laptop and realised it is not compatible.will i be able to download it again  on another computer?

    Yes.  There should be a download link if you purchased it from Adobe.  You can also find a download at...
    PSE 10, 11, 12,13 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
    You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

  • Firefox 7 automatically downloaded and this version is not compatible with my university's website. Version 6 did work. Is there a way to go back to version 6?

    Firefox 7 automatically downloaded and this version is not compatible with my university's website. Version 6 did work. Is there a way to go back to version 6?

    Try downloading and installing 6.0.2 from here:
    http://www.oldversion.com/macintosh/download-Firefox-6.0.2.html
    In Firefox preferences/advanced/update uncheck download and automatically install updates. Instead check ask me what to do.

  • Windows 8 64bit not compatible w/ AMD Athlon 64 processor and/or ASUS A8N-SLI motherboard.

           Why should I have to go through a plethora of troubleshooting techniques, then have to settle for using the Windows 8/ 32bit install CD, when I have a 64bit system?  I think it's probably something in the Windows
    8 /64bit code that causes it to fail install w/ AMD Athlon 64bit processor, and/or my ASUS A8N-SLI motherboard.  After a lot of hassle I tried the Windows 8 /32bit CD and that seems to work fine.  My real question is, why should I have to settle
    for 32bit on a 64bit system?

    I had the same experience trying to install Window 8 Pro 64bit (Build 9200) on an old XP SP3 32bit system, but I somehow got it working; the full story.
    I had two XP Sp3 32 bit systems I wanted to upgrade to Window 8 Pro 64 bit (with the $40 upgrade deal available now). System#1 is: I7 920/Asus P6T deluxe/EVGA 560Ti/3GB/1 TB SATA 300 drive/1.44 Floppy/ 12X Bluray burner (pulled the old TV tuner card for
    upgrade-incompatible). I ran the Windows 8 upgrade advisor - very few issues (TV Tuner card as mentioned and other software) - bought the upgrade. Downloaded the upgrade from my Win7Pro 64bit system to obtain the 64bit ISO (2.69GB) - burned to DVD. Installed
    from DVD; no problems, finished in under 20 minutes - working great (really fast boot!).
    System#2 is: Opteron 180/Asus A8N-E/EVGA 275GTX/2GB/1 TB SATA 300 drive/ 1.44 Floppy/ 16X DVD RW burner; the Windows 8 upgrade advisor - more incompatible software than system#1, but no incompatible hardware. I had read a number of blogs concerning the issues
    others were having with the upgrade failing, so before I purchased, I thought I would run the 64bit install DVD I had (known to work on the other system) to see if it worked. I should note this system was not-in-use and thus I was not worried if the install
    failed (I'd just be annoyed!). Ran the install from the DVD; initial splash screen - no spinning dots - waited 15 minutes (by which time no activity on DVD or hard drive) - failure. Rebooted - entered bios (1010) - tried many combinations of settings up to
    disabling nearly everything (NVRAID, Legacy USB, Floppy, Audio97- all disabled / moved SATA into every slot (1-4) / tried SATA 150 and SATA 300 (SATA2, slots 3-4) - no change - failure X4 attempts. Now original XP3 installation is corrupted (GRRRR!) - I should
    have imaged the drive BEFORE - oh well. Read more about others experience with this seemingly NForce board-related issue. Plan B - I will try install with an IDE (PATA) hard drive (80GB) - failure. Read more - some mention Window 8 installer not "liking" XP
    partitions / disks (???); Plan C - Re-partition / format / check 80 GB IDE drive with WDTools - attempted Win8Pro install - failure. Dejected; last attempt before considering Win8Pro 32bit - Plan D - Re-partition / format / check 1 TB SATA 300 drive with SeaTools
    (Barracuda 32GB buffer-7200rpm) - run Win8PRO 64bit install from DVD (build 9200) - success! Install took nearly an hour, with 3 reboots to the finish. Specifics (install configuration): 1 TB SATA drive in Slot 4 (SATA2), upgraded memory to 4GB Corsair PC3200
    (4 slots filled), Two DVD drives on Primary IDE channel (master and slave), secondary IDE channel - no devices, bios (1010) - NVRAID, Audio97,1394 port,LAN -disabled; USB 2.0, USB Legacy, Floppy - enabled, IDE-Auto), TrendNet USB wireless adapter on USB slot
    2 (motherboard), EVGA 275GTX in PCIe slot 1, no other cards. System seems to be performing well (fast boot times, no hangs), but as noted, no sound (I actually forgot to re-enable the Audio97 device in bios; it was 2am). I will see if I can get the Audio97
    enabled today; my backup is to add a Turtle Beach Montego DDL PCI card (with the Windows7 64bit driver and run in compatiblity mode). Hope this saga might help some others out - good luck.

  • ITunes and Windows 8.1 OS compatiblity

    Hello all,
    I am having absolute fits getting iTunes video to play through Windows 8.1 OS. Is there a patch, or update, or something??
    I have gone into properties and checked the box to "make compatible with Windows 8." I have to wonder, since my OS is 8.1 is that possibly what is not making the connection with "compatibility mode" here?
    If so, is there a solution? I had another laptop running Windows 7 and the program works just fine! The key word there is had.
    I've 'chatted' with a Windows rep. She told me to uninstall iTunes and reinstall it to see if that will fix the problem. I have not done that yet (I'm not sure if all the programming I have already downloaded will go with the uninstall....).
    I look to you for suggestions.
    Thanks,
    RP

    Right.. I have installed windows 8.1 and now iTune will not see any Apple devices I connect to my computer.
    From the computer I can access any Apple device I connect to it (picture folder for example).
    Latest version of iTunes is installed....
    Is this a but with Windows 8.1 or ... ???
    - I did unstall iTunes and re-instaled... no joy...

  • Windows 8.1 not compatible with Scanner of HP LaseJet M1120 MFP

    I replaced my laptop and on the new laptop Windows 8.1 is installed.
    I have the CD to install te software for HP LaseJet M1120 MFP, but it is not compatible with W8.1.
    Then, I switched-on the multifunction printer and I plugged the cable into the USB port of the laptop.
    The laptop recognized the printer and installed it, but it didn't recognize the scanner.
    I tryed to perform the download of the necessary software directly on the HP site, I also installed HO doctor software, but I was not able to solve the issue.
    Can you please help me to solve the issue?
    Thanks a lot for your support.
    Luigi Romano

    Hello @BAMBO , and welcome to the HP Forums.
    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at HP Commercial LaserJet Forums.
    I hope this helps!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • WPF, Expression Encoder and Window 8+, is that compatible ?

    Hi,
    we would like to implement whtat it says in the article:
    http://www.codeproject.com/Articles/285964/WPF-Webcam-Control
    any one knows if this is comatible with Windows 8 +, since the new windows is not compatible with Direct X.  Is this artcile is a long terme solotion ?
    Thank you !

    That doesn't appear to be a US model, and this is the forums for Toshiba USA. You may want to contact Toshiba in your region.
    - Peter

  • I am a student and Firefox 4 is not compatible with TestGen, now I have a real problem. I can't get Firefox 3 to come back

    I am enrolled in Intermediate Algebra with Pearson My Math Lab and they use TestGen to take quizzes and test. Firefox 3 was compatible with this program. Over the weekend I download Firefox 4 and lost access to my tests and quizzes. Their Tech Support just said that Firefox 4 is not compatible and to download Firefox 3 once again. I did this, but I can not bring it back up; Firefox 4 only comes up.

    To revert to the previous secure version, please do the following.
    Go to [http://www.mozilla.com/en-US/firefox/all-older.html Download Firefox v3.6.17] and download it to the desktop.
    EDIT: just noticed you have a MAC, so follow removal instructions here: http://kb.mozillazine.org/Uninstalling_firefox

  • Windows vista is not compatible with itunes64bit install

    I have downloaded the itunes 64bit setup and it does not work with my windows vista pc. I just bought a new pc and haveing compatibility problems with the vista and itunes and quicktime. does anyone know how to fix this?

    http://i84.photobucket.com/albums/k38/Zantardaman/ItunesError.jpg
    This 'should' be a link to a picture that is being talked about. It's happening on my copy of 64 bit vista as well, using the most up to date installer for 8.1.1 itunes. Incase this link doesn't workin on these forums (my 1st post) here is what it says word for word.
    The Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode, or if the Windows Installer is not correctly installed. Contact your support personnel for assistance.
    Since I'm pretty sure Vista doesn't default to safe mode EVERY time you log in, I'd say my problem is of the later type. Any assistance would be nice, but if nobody replys shortly I do plan on calling support and bugging them for as many hours as it may take to get the problem fixed.
    Edit: I just realized that we are both running gateways. Though he/she said gateway said it was an apple problem. Anyways, just thought I'd throw that note out there.
    Message was edited by: Zantar

  • WINDOWS 8/ADOBE-NOT COMPATIBLE?

    I HAVE WINDOWS 8. MY ADOBE FLASH PLAYER NO LONGER WORKS. THE NEW VERSION WILL NOT DOWNLOAD. I WANT TO BUY PHOTOSHOP ELEMENTS BUT IT APPEARS ADOBE PRODUCTS ARE NOT COMPATIBLE WITH WINDOWS 8.

    joearsenault wrote:
    I WANT TO BUY PHOTOSHOP ELEMENTS BUT IT APPEARS ADOBE PRODUCTS ARE NOT COMPATIBLE WITH WINDOWS 8.
    Where do you get that impression from? All current versions of Adobe products are compatible with Windows 8.
    Windows 8 is listed in the Tech Specs
    http://www.adobe.com/products/photoshop-elements/tech-specs.html

Maybe you are looking for