Abort and Reset methods do not execute on incoming error-

Hi,
I am using labview 8.6. Can i use reset method in my host vi to reset my FPGA VI? Thanks

The help explains what the Reset button does:
Reset—Aborts and resets the FPGA VI on the FPGA target to
the default state of the VI. This method sets the FPGA VI controls and
indicators to their default states, sets uninitialized shift registers to their
default values, clears FIFOs, and sets global variables to their default values.
This method does not reset memory. If an error occurred before this method runs,
the method runs normally and passes the error in value to
error out. If an error occurs while this method runs, the
method runs normally and merges error in and its own error
status to produce error out.
What exactly is the issue you are facing? Posting code will be helpful.
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies

Similar Messages

I'm being asked to enter my ID password on my ipad for icloud, but the email is no longer active and reset remails are not being received.

I'm being asked to enter my ID pswd on my ipad 2 for icloud. but the email address and ID are no longer being used, and reset emails are not being received. How can I deactivate this? I have another ID which works fine, but this issue with the old ID is not allowing me to use my ipad. thanks.

If your iPad is signed into an old ID and you are trying to change it, if the old ID is yours, and if it is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

How to remote desktop user can read, write ,modify and traverse folder but not execute?

Now I ceate a user accout whis is user type and put him into remote desktop group.
he can login this server by remote desktop.
My server is windows 2003 but not in nt domain and it is a workgroup computer.
I want to limit him access right on one folder in which have many folders and .exe file.
I only want he can read , write,modify file and traverse folder but not execute any .exe file.
How can I implement this through NTFS.
Please give me some advice.

Hi,
I think you could using advanced option to configure the file or folder permission:
http://technet.microsoft.com/en-us/library/bb727008.aspx
Regards.
Vivian Wang

Preuut and postuut sequences are not executing when run using UI. They run when using the sequence editor.

I am using TestStand 3.5 and LabVIEW 8 in a Windows XP environment.
I have a sequence that runs properly when run from the sequence editor. I have made a few minor mods to the simple Operator Interface that ships with TestStand. When I run my sequence using the modified Operator Interface, the PreUUT and PostUUT sequences do not execute. Only the main sequence executes. This also happens when I run the demo sequences that ship with TestStand.
What am I missing?

Hi,
It sound like you are executing the sequences without the process model, do you get a report at the end of the execution?
What are these minor mods you have done?
Regards
Ray Farmer
Regards
Ray Farmer

Why addcomponent and removecomponent method are not in component class,

Hi,
why addcomponent and removecomponent method are not in component oand component class,
Thank you

java.awt.Container has the appropriate add and remove methods:
http://java.sun.com/javase/6/docs/api/java/awt/Container.html
If that seems odd to you, you need to think about the Composite Pattern:
http://en.wikipedia.org/wiki/Composite_pattern
[url #" style="display: block; background-image: url('http://upload.wikimedia.org/wikipedia/en/1/13/Compositepattern.png'); width: 406px; height: 271px]

Tried the solutions posted for this "SubVI filter not executable. Undefined error" but not solving the problem

Hello,
I am trying to use a lowpass filter for my application but getting the error "SubVI filter not executable. Undefined error".I tried working with the solutions at this post
http://forums.ni.com/t5/LabVIEW/SubVI-filter-not-executable-Undefined-error/m-p/1996701#M657751 and results with
1. Create a blank vi, put a VI filter in the block diagram (this should not be functional as it is not wired), copy it and paste it in my other project. I believe if the filter is the first vi of a blank project, it is funcitonal and then you may copy it wherever you need to.
Result:
2.Tried to open the filter panel of the Filter but showing the same error as shown inthe below image
Don't why the solutions worked for others are not working.Can someone suggest a solution for this.
thanks in advance.

Hi PatanGova,
Very strange error. Actually, there are no required inputs on this express VI, so it should be able to run even without wires. It is not correct as you said: "this should not be functional as it is not wired". Nothing will happen, true, but the run arrow should not be broken.
For some reason, the VI with the Filter express VI fails to compile. I tried it on my computer (LV 2013) and get no error when I add it to a new VI. As was suggested in the linked forum thread, you need to open the front panel of the Filter VI and run it to see the explicit error.
If you do, do you also get the error:
"This VI claims to be part of a library that does not include the VI. The VI might have been deleted from the library. Add the VI to the library again or select File - Disconnect from the library."?
If you do, it seems that you may have a project library somewhere that has taken ownership of the express VI. The ownership prevents you from running or editing the express VI. To free the VI, you need to do one of two things. Either, you need to load the library into memory, or you need to disconnect the VI from the library. Either way, you need to find the project library that has taken the ownership of the VI. As soon as it is released, it should run for you. You release it by selecting File»Disconnect from Library on the VI.
The workaround described in your link (and also here: http://forums.ni.com/t5/LabVIEW/compatibility-problem-labview-2009-2010-2011-quot-This-VI-claims/td-... tells that you can make a copy of the VI and thereby create another instance that is free. This solution may work for you as well, but if not, you may not have created the copy properly. Maybe your copy of the VI also became part of some project library that took ownership. In either way, you should rather find the project library to release the VI before trying the workaround to copy it.
If project library ownership is not the problem, maybe the problem is connected to LV 2011, as most forum posters report that it only happens here.

I have removed and re installed I tunes and all related apple products. 5 times and still get message not installed correctly or error 7 or to install english version. I give up help

I have removed and re installed I tunes and all related apple products. 5 times and still get message not installed correctly or error 7 or to install english version. I give up help

Have you worked through the tt2 user tip:Troubleshooting issues with iTunes for Windows updates this is the best source on resolving iTunes for Windows issues.

The process could not execute 'sp_repldone/sp_replcounters' error for Log Reader Agent and SQL Server Assertion 17066 & 3624 errors in SQL Logs

One of our SQL Server started creating SQLDUMP file and and on investigation I found the error longs are filled with Errors 3624 & 17066. There is transnational replication configured on one of the databases is the LogReader Agent is failing error "The
process could not execute 'sp_repldone/sp_replcounters' on XXXXX".
Not sure if both these Assertion & Logreader Agent errors are related. Before I remove and put the replication, I wanted to check if anyone has experienced the same issues or aware of what the cause.
***********Error messages from SQL Logs******
**Dump thread - spid = 0, EC = 0x0000000111534460
Message
A system assertion check has failed. Check the SQL Server error log for details. Typically, an assertion failure is caused by a software bug or data corruption. To check for database corruption, consider running DBCC CHECKDB. If you agreed to send dumps to
Microsoft during setup, a mini dump will be sent to Microsoft. An update might be available from Microsoft in the latest Service Pack or in a QFE from Technical Support.
Error: 3624, Severity: 20, State: 1.
SQL Server Assertion: File: <logscan.cpp>, line=2123 Failed Assertion = 'UtilDbccIsInsideDbcc () || (m_ProxyLogMgr->GetPru ()->GetStartupState () < RecoveryUnit::Recovered)'. This error may be timing-related. If the error persists after rerunning
the statement, use DBCC CHECKDB to check the database for structural integrity, or restart the server to ensure in-memory data structures are not corrupted.
Error: 17066, Severity: 16, State: 1.
External dump process return code 0x20000001.
External dump process returned no errors.
Thank you in advance.

You need to determine if this error is a transient one or a show stopper one.
It sounds like your log reader agent has crashed and can't continue.
If so your best bet is to call Microsoft CSS and open a support incident.
It also sounds like DBCC CHECKDB was running while the log reader agent crashed.
If you need to get up and running again run sp_replrestart, but then you might find that replicated commands are not picked up. You will need to run a validation to determine if you need to reinitialize the entire publication or a single article.
I have run into errors like this, but they tend to be transient, ie the log reader agent crashes, and on restart it works fine.
looking for a book on SQL Server 2008 Administration?
http://www.amazon.com/Microsoft-Server-2008-Management-Administration/dp/067233044X looking for a book on SQL Server 2008 Full-Text Search?
http://www.amazon.com/Pro-Full-Text-Search-Server-2008/dp/1430215941

Resetting the "DO not Execute " in closed work orders.

Hi Guys,
I have a scenario where I have to open old and closed work orders to make some changes and then save it. I am facing problem wit some work orders which were closed by using the "do not Execute" option, is there a way to reverse it so that I can update the work orders and then closed them again?
Thanks and regards
Anoop Sharma

Reference [Thread|changing of system status do not execute]
-S.N

Workflow not executing - No event error no log errors

Hello experts,
I finally solved the exceptions i was getting in my work flow and all the thanks goes for all the forum participants in general and to Sudhindra, and Glauco specifically,
Now i have another error that i am clueless about, i want to trigger the workflow when the status of a document changes, so when i change the status nothing happens, in SWEL there are no errors, It says that receiver started correctly, in ST22 there are no errors, but
the workflow does not execute, the workflow should open a web browser, so it is not opening it. Any ideas as to why this is happening ?
regards
Points are awarded

I have replied to this in the original thread... anyways here is a copy of the same...
No the background task is executed by the user WF-BATCH and once the function module is called the user transfers the control to the SAP GUI and then the SAP GUI communicates with the OS. In this case if the task is background then how will the OS know where to call the web browser? It will not know the user to whom this request must be dispatched.
So the bottom line is that you cannot use this functionality in a background task.
There is one workaround that comes to my mind. What you can do to inform a user that the "Changed" event has triggered is as follows:
1. Create a workflow which will trigger off from the Changed event of "DRAW"
2. Create a send mail step and check the checkbox that says "Send Express" and include the URL you want to open in the Mail body and then send it to an outlook user.
If you use the Send Express flag then the user will be intimated once the event has occured if and only if he uses the SAP GUI. If the user does not use the SAP GUI then you can remove the check but just send the mail to the outlook so that the user receives the email in outlook once the event has triggered!
Apart from this nothing comes to my mind!
All the best!
Sudhi

SubVI filter not executable. Undefined error.

Good morning,
During the development of a bigger labview project, I came to need filtering of my waveforms at some point. I am getting a broken arrow signaling the filter assistant :
"SubVI 'Filter' : SuvVI is not executable"
I thought it could have something to see with the whole program and thus created a simple VI of acquisition from a myDAQ aparatus and had the same error.
Do you have any idea how I could at least identify the error?
Thanks in advance,
David

David Pastorino wrote:
Good morning,
During the development of a bigger labview project, I came to need filtering of my waveforms at some point. I am getting a broken arrow signaling the filter assistant :
"SubVI 'Filter' : SuvVI is not executable"
I thought it could have something to see with the whole program and thus created a simple VI of acquisition from a myDAQ aparatus and had the same error.
Do you have any idea how I could at least identify the error?
Thanks in advance,
David
If you open the SubVI Filter and hit Ctrl+R LabVIEW should tell you what you need to fix in that VI.
When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"

HT4623 I updated my phone to iOS6 and now it will not ring for incoming calls. It blocks my landline number. I've tried resetting, updating, etc. I've gone to the Verizon store. They were puzzled too. Any ideas of what I should try next?

I accepted the push to update my iphone to iOS6....now it will not ring. It blocks calls from my landline. Help! I've tried resetting, etc.

It has been caused in an OTA glitch. You need to hook it up to your computer, restore and update off of iTunes. Good Luck.

Applets stop() method is not executed

Hi,
I

ups, once again...
i'm writing on an applet for database administration and i want to save all the changes when the user closes the browser. i know already that the stop() method is called in this cases. that's why i made this changes in that method. but i was very astonished that sometimes the changes were saved and sometimes not. so i found out that the stop() method is canceled in the middle of execution. i'm using the newest java plugin and ie 5.5. maybe i also have to mention that everything works fine if i run the applet with the appletviewer from jbuilder. does someone know how to control the stop() method or are there any limitations regarding in execution time or whatever?
thanks in advance!

The numeric digits, space, and enter keys do not work on my iphone and resetting it is not helping... any other options

I noticed that the following keys do not work on my iphone (space, language, numeric keys, enter/go buttons) what should I do, tried resetting it multiple times, but it didnt work.

Restore from backup
Restore as new
http://support.apple.com/kb/HT1414

Facebook is not loading on my iphone 5. I tried changing password and resetting but still not working. can someone please help?

facebook not loading on my iphone 5

Delete the Facebook app then reinstall.
Tap and hold down the Facebook app until it jiggles then tap the x then tap Delete. Press your Home button once or twice to stop the jiggling.
Restarrt your iPhone.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, then swipe the slider to power off.
Then press and hold the Sleep/Wake button until the Apple logo appears.
Then go to the App Store and re download Facebook.

Abort and Reset methods do not execute on incoming error-

Similar Messages

Maybe you are looking for