Abort characteristic error in reprot.

Hi ,
The query thorough out of BEX with error
1) : ABORT CHARACTERISTIC 0MAT_PLANT__0CO_AREA is not available in the infocube.
2) ABORT CHARACTERISTIC 0MAT_PLANT__0PROFIT_CTR is not available in the infocube.
But I checked in the info cube ->change for the strucutre and navigational attributes.
These two characteristics are available int he cube .
But the query pop up the above error.
Request your help to solve this problem.

I checked in char 0mat_plant and I can see that controling area and profit center are linked as nav attributed to the compounding obj.
when I try opening query desingner it gave me the error :
Error : The following objects were not found when accessing server.
1) Info objects : 0mat_plant__0co_area
2) Info objects : 0mat_plant__0proft_ctr
Affected items :
Controling area
Profit center

Similar Messages

Abort system error in program CL_RSDM_READ_MASTER_DATA and form_sidval_dire

HI All,
The following error is thrown when I execute the query.
abort system error in program CL_RSDM_READ_MASTER_DATA and form_sidval_direct_
However, earlier today, I ran this query successfully several times.This Query is on a multiprovider.
Appreciate your help in advance.
Regards,
Harika

Dear Harika,
Try to repair at RSRV and check.
Check: Re: SID error for characteristic
Srini

Abort System error in program CL_RSDM_READ_MASTER_DATA

Hi Gurus,
I had a user who was trying to run a query and they got this error msg:
"Abort System error in program CL_RSDM_READ_MASTER_DATA and form_sidval_direct"
I went to RSRV and tried to repair Master Data objects, I came up with this error only on this one "Characteristic 0WBS_ELEMT : Missing initial entry in table /BI0/XWBS_ELEMT". Please guide as to what I should do for this message.
Thnx.

Thanks Mangra,
I did not understand your statment " Check your master data whether the first blank entry is existing or not(?) if not create it (create what ?), transport the object"
Please explain little bit more with step by step.
Thanks

Abort System Error in Program SAPLRRV and for RRSV_CHAVL_TO_VALUE_CONVERT

Hello SDN
While refreshing a query in a Workbook, I have received this error message and getting disconnecting form the BW server.
"Abort System Error in Program SAPLRRV and for RRSV_CHAVL_TO_VALUE_CONVERT"
Does anyone has any idea? It is happening in Production and need to fix it as soon as possible.
Appreciate any help and points will be assigned for useful information.
Thanks
kumar

Hi Dinesh
It is stopping at the BREAK-POINT in Function LRRMSU13(RRMS_X_MESSAGE)
variable_screen=X&template_id=0QUERY_TEMPLATE
In the messages , For generation, it display:
&CAUSE&
The query contains selection elements with "Constant Selection". Such a
query cannot be run in the read mode 'Read Everything at Once'.
&SYSTEM_RESPONSE&
The read mode is automatically converted.
&SYS_ADMIN&
In the Variables, I see
&CAUSE&
Variable <(>&<)>V1& is used in the query in such a way, that an
optional entry is not possible.
For example, you might be using an "Exclude", or the variable might be
connected using OR to additional selections for <(>&<)>V2& in the
global filter, but is still displayed in the columns selections.
It is also not possible to use an optional parameter variable to fill
an interval selection in either the from-field or the to-field.
&SYSTEM_RESPONSE&
&WHAT_TO_DO&
If you are able to accept the mandatory entry, you need not do
anything. Otherwise you must work with several variables in the query.
You can use an optional interval variable to do this.
&SYS_ADMIN&
For Key Figs :
&CAUSE&
Quantities are multiplied with values for the key figure &V2& (&V1&).
This is not sensible.
A basic key figure was probably defined that contain a price. Only
addable amounts should be written on the database. Ratios and prices
are calculated as key figures. Therefore, the system maintains the
correct sequence, meaning summing takes place on every place and then
the quotient is formed.
If a 'price amount' is saved as a basic key figure after all then the
'non-aggregated indicator' can be undone using 'Change key figure'.
Therefore, the system carries out the multiplication (or division)
before the summing. The key figure is then assigned to the group 'Other
columns'.
&WHAT_TO_DO&
Please check the definition of the key figure &V2& (&V1&).
<DS:TRAN.KDNN>Check or change key figure &V1&</>
Can you please let me know how to fix this issue?
Thanks
Kuamr

Error Specify a value for variable-Abort System error in program SAPLRRK0 a

Dear Experts,
Could anyone help me to fix this issue?
I have an Customer exit variable in my query to calulate the first week of the prior year value as per the system calendar. when i execute the query, I am receiving the following error messaged and i am throwing out from the BW server.
The error message is
Error Specify a value for variable ZR00**
Abort System error in program SAPLRRK0 and form APPEND_KHANDLE_1-01-
Many thanks in advance.
Regards.
Krishna.

Hi Kishor,
try runnig the same query in RSRT, with execute and debug option.
Also check in query designer for its correctness.
Hope this helps...
Regards,
umesh

Abort System Error in program SAPLRRS2 and form INITFL_ASSIGN-01 error

Hi All,
When I refresh a query/workbook getting following error message and can not proceed further..
Abort System Error in program SAPLRRS2 and form INITFL_ASSIGN-01
We are using BW 3.5 and BEX reports.
I'd appreciate if you could help me on this

I don't know if you have since been able to resolve this problem.
Anyway, for future reference, I have just had the same error message and was able to resolve it by simply removing and then reinstalling one of the characteristics, together with its variables and filters, in the free characteristics section of the query.
Hope that this is of help to someone.

Unable To Execute Files In The Temporary Directory. Setup Aborted. Error 5: Access Is Denied.

Hi Everyone,
Whenever I install some new software in my new laptop I get this error:-
Unable To Execute Files In The Temporary Directory. Setup Aborted. Error 5: Access Is Denied.
I have tried synchronizing the clocks but it doesn't remove the problem.
These softwares work on another laptop that i have, which also runs windows 7.
Can someone please tell me the solution as this is extremely urgent.
Thanks In Advance.
-Michael

In short:
============
My permissions were all fine, so if anyone has trouble resolving the issue after sorting permissions then make sure you try fully disabling your anti-virus / anti-spyware / firewall applications, because that was the cause for me.
In detail:
============
Problem:
Failed to install this application
- http://www.ssware.com/cryptoobfuscator/download.htm
- on Windows 8.1 x64
- Get error message "Unable To Execute Files In The Temporary Directory. Setup Aborted. Error 5: Access Is Denied."
First Candidate Solution
The issue turns out to NOT be security rights on the Temp folder
ESET Smart Security HIPS Advanced Memory Scanner is the cause
http://kb.eset.com/esetkb/index?page=content&id=SOLN2908&actp=search&viewlocale=en_US&searchid=1392804914417
Instead, I went and turned off all the ESS protections one by one and it turned out to be HIPS that is causing this false positive.
In fact, it is the Advanced Memory Scanner option under HIPS that is causing the error, while the application in question is legit (using Inno Setup and presumably trying to write to the user temp folder, not sure whether just logs or to execute from there)
Furthermore, Smart Security logs have no entries under HIPS even though I ticked "Log all blocked operations" under the HIPS "Advanced setup" - it was quite a journey to find out the cause :)
Thank you. I have the same OS and installed ESET Smart Security as well. And it is resolved now.
I just want to add, that by "Temporarily disable protection" and "Temporarily disable firewall", it doesn't work. You have to disable HIPS, as KristjanL said.

HFM EPMA application deployment aborted with error Object reference not set

HFM EPMA application deployment aborted with error Object reference not set to an instance of an object when trying to validate/deploy any HFM application in EPMA. This has started happending after we have deleted a Dimension in one of HFM applications. The deleted dimension is a shared dimension.
We are facing this issue in a distributed environment with version 11.1.2.1. This applications are built here newly.
Following is the error log entry
16] ERROR Object reference not set to an instance of an object.
at Hyperion.DimensionServer.CompareCriteria.<>c__DisplayClass5.<GetMemberClassProperties>b__4(Dimension dim)
at Hyperion.DimensionServer.Library.IterateDimensions(Action`1 action)
at Hyperion.DimensionServer.CompareCriteria.GetMemberClassProperties(ApplicationClass appClass, DimensionClass dimClass, MemberClass mbrClass)
at Hyperion.DimensionServer.CompareCriteria.GetCommonMemberClassProperties(RelationshipMember fromMember, RelationshipMember toMember, ApplicationClass fromAppClass, ApplicationClass toAppClass)
at Hyperion.DimensionServer.CompareMemberEvaluator.CompareProperties(RelationshipMember fromMember, RelationshipMember toMember, ApplicationClass fromAppClass, ApplicationClass toAppClass, List`1 propertyDifferences)
at Hyperion.DimensionServer.CompareMemberEvaluator.Compare(RelationshipMember sourceMember, Application sourceApp, Application targetApp, Boolean firstPass, Int32 level, Boolean continueCheckingAfterDifferences)
at Hyperion.DimensionServer.CompareMemberEvaluator.Compare(List`1 sourceTopMembers, List`1 targetTopMembers, Application sourceApp, Application targetApp, Boolean firstPass, Boolean continueCheckingAfterDifferences)
at Hyperion.DimensionServer.CompareMemberEvaluator.Execute(List`1 fromTopMembers, List`1 toTopMembers, Dimension fromDimension, Dimension toDimension, Boolean continueCheckingAfterDifferences)
at Hyperion.DimensionServer.CompareDimensionEvaluator.Execute(Dimension fromDimension, Dimension toDimension, ApplicationClass fromAppClass, ApplicationClass toAppClass)
at Hyperion.DimensionServer.CompareEngine.CompareDimensions(Dimension fromDimension, Dimension toDimension)
at Hyperion.DimensionServer.CompareEngine.StartCompare()
at Hyperion.DimensionServer.Validations.HFMApplicationValidation.CheckStaticDimension(Library snapShot, Dimension dim, Application oldApp, String[] skipProperties)
at Hyperion.DimensionServer.Validations.HFMApplicationValidation.CheckStaticDimensions(Application baselineApp)
at Hyperion.DimensionServer.Validations.ApplicationValidation.ValidateAgainstBaseline()
at Hyperion.DimensionServer.Validations.HFMApplicationValidation.InternalValidate()
at Hyperion.DimensionServer.Validations.ApplicationValidation.Validate()
at Hyperion.DimensionServer.Validations.ApplicationValidation.<ValidateAsync>b__0()System.NullReferenceException: Object reference not set to an instance of an object.
at Hyperion.DimensionServer.CompareCriteria.<>c__DisplayClass5.<GetMemberClassProperties>b__4(Dimension dim)
at Hyperion.DimensionServer.Library.IterateDimensions(Action`1 action)
at Hyperion.DimensionServer.CompareCriteria.GetMemberClassProperties(ApplicationClass appClass, DimensionClass dimClass, MemberClass mbrClass)
at Hyperion.DimensionServer.CompareCriteria.GetCommonMemberClassProperties(RelationshipMember fromMember, RelationshipMember toMember, ApplicationClass fromAppClass, ApplicationClass toAppClass)
at Hyperion.DimensionServer.CompareMemberEvaluator.CompareProperties(RelationshipMember fromMember, RelationshipMember toMember, ApplicationClass fromAppClass, ApplicationClass toAppClass, List`1 propertyDifferences)
at Hyperion.DimensionServer.CompareMemberEvaluator.Compare(RelationshipMember sourceMember, Application sourceApp, Application targetApp, Boolean firstPass, Int32 level, Boolean continueCheckingAfterDifferences)
at Hyperion.DimensionServer.CompareMemberEvaluator.Compare(List`1 sourceTopMembers, List`1 targetTopMembers, Application sourceApp, Application targetApp, Boolean firstPass, Boolean continueCheckingAfterDifferences)
at Hyperion.DimensionServer.CompareMemberEvaluator.Execute(List`1 fromTopMembers, List`1 toTopMembers, Dimension fromDimension, Dimension toDimension, Boolean continueCheckingAfterDifferences)
at Hyperion.DimensionServer.CompareDimensionEvalua
There was a bug in earlier releases for deleting dimensions with children, making the children orphans.
Heard from release notes that it has been fixed, but we are seeing this issue in 11.1.2.1 again.
Please help us out in resolving this error.

Hi,
I always ask this first, have you installed all the planning and epma patches as there have been many issues addressed in 9.3.1
Cheers
John
http://john-goodwin.blogspot.com/

[solved] PGKBUILD for hg package error "abort: HTTP Error 404: NOT...

Im working on a PKGBUILD for pcw-hg using the example PKGBUILD-hg.proto as a guide
I can do..
hg clone https://bitbucket.org/emg/pcw
..and everything works fine, but with makepkg and the PKGBUILD im creating I get "abort: HTTP Error 404: NOT FOUND"
Heres what Ive got..
# Maintainer: tjwoosta <[email protected]>
pkgname='pcw-hg'
pkgver=146
pkgrel=1
pkgdesc="pcw uses inotify to monitor a directory tree (created by ii) and \
open terminals running cw with the in and out files for each channel."
arch=('i686' 'x86_64')
url="http://www.deepcube.net/code/pcw/"
license=('MIT')
depends=('ii-emg-hg' 'srw-hg')
makedepends=('mercurial')
provides=('pcw')
conflicts=('pcw')
_hgroot="https://bitbucket.org/emg/"
_hgrepo="pcw"
build() {
cd "$srcdir"
msg "Connecting to Mercurial server...."
if [ -d $_hgrepo ] ; then
cd $_hgrepo
hg pull -u
msg "The local files are updated."
else
hg clone $_hgroot $_hgrepo
fi
msg "Mercurial checkout done or server timeout"
msg "Starting make..."
rm -rf "$srcdir/$_hgrepo-build"
cp -r "$srcdir/$_hgrepo" "$srcdir/$_hgrepo-build"
cd "$srcdir/$_hgrepo-build"
make
package() {
cd "$srcdir/$_hgrepo-build"
make PREFIX="/usr" DESTDIR="$pkgdir/" install
install -D -m644 LICENSE \
"$pkgdir/usr/share/licenses/$pkgname/license.txt"
install -D -m755 extras/cw_color.sh \
"$pkgdir/usr/bin/cw_color.sh"
install -D -m755 extras/chat.sh \
"$pkgdir/usr/bin/chat.sh"
install -D -m755 extras/pcw_notify.sh \
"$pkgdir/usr/bin/pcw_notify.sh"
Any idea what Im doing wrong?
Last edited by tjwoosta (2011-03-02 03:17:01)

jasonwryan wrote:
You could try removing the trailing slash on hg_root and just have:
_hgroot="https://bitbucket.org/emg"
lol, I cant believe I didnt think or that, I tried all kinds of crazy stuff. Works though thank you

"abort system error in program CL RSR and form GET_PROVID-02-(see long text

Hi All,
When i try to excuting bex query in analyser and whaen i have to exucuting cube contents, i got this error message :
"abort system error in program CL RSR and form GET_PROVID-02-(see long text)"
System error in program CL_RSR and form GET_PROVID-02- (see long text)
Message no. BRAIN299
Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
Can anyone help me?
kumar.

Hi , could you please check note 1166294 and check if the issue will be fixed ?
1166294-BRAIN 299 in CL_RSR, form GET_CHANMID-02-
Thanks,
Walter Oliveira.

Abort system error when opening the BEx query

When runing the Bex query I get this error
' SQL Error 1578 - Abort system error in program SAPLRRKO and form RSRDR;SRRK0F30_01_'
Diagnosis: Internal error is a targetted termination since the program has an incorrect status.
Please advice me how to correct this issue.
Thanks in advance.
Taj

Hey,
Thanks for your answer , I assigned a points to you. still I need more info on this then what to do further.If this was caused due to program error then what I have to do.
Version: 3.50, Package :SAPak35012 .
Please let me know is this something basis needs to take care of this? .
Looking forward to hear from you.
Taj
Message was edited by: Tamkris Taj
Message was edited by: Tamkris Taj

Abort Syatem Error :RSDRC/FORM DATA_GET_ODS error in RSDRO_READ_ODS_DATA

Hi ,
when I execute the report/query from ODS i'm geting the follwing error and it is disconnecting from BW server.
" SQL Error 4030.
Abort Syatem Error :RSDRC/FORM DATA_GET_ODS error in RSDRO_READ_ODS_DATA .
ABORT system Error :in Program SAPLRSDRC and FORM DATA_GET_ODS "
I have checked the ODS seting and it was enabled and active.
please any body is having solution
Thanks
Ram

I do not have problem loading data into my ODS.
My scenario is as follows:
1. The source field is OPTIME of type P and stores date and time
2. I created a Keyfigure ZOPDATE as date field of type DEC.
3. The aim is to take YYYYMMDD from OPTIME into the ZOPDATE InfoObject (KFG).
4. I Created a conversion routine to pick YYYYMMDD from OPTIME and assign it to ZOPDATE.
5. It worked fine and stored the data in ODS as DD.MM.YYYY.
6. I have a similar IO ZPUBLISH but getting its data from a date field POSTING_DATE
7. The problem is that ZOPDATE cannot be displayed as date in my query wheras ZPUBLISH can.
8. If I insert ZOPDATE in the query I get the error, and if I remove the query runs fine.
If I store the date field as Characterestics I may not be able to use as colunm in the report, that is why I wanted to have it as KFG.
Please someone should help out.
Edited by: SALE MUHAMMAD ABDULLAHI on Jun 4, 2008 6:50 AM

Abort system error in program SAPLRSOA & form FUNCSOA_VCUBE_READ_REMOTE_DAT

Hi All,
Could please help on the following issue,,
when i am opening the workbook of bex reports i have following error ,please suggest me on this and how can I run the my workbooks with error.
The error is *Abort system error in program SAPLRSOA and form FUNCSOA_VCUBE_READ_REMOTE_DAT*
Thanks
ram

Try replicating the datasource for the virtual cube on which these reports are based and then activate the transfer rules using this datasource.
I faced this issue when my system was migrated from Oracle to DB2. Doing the above fixed this issue.
Please let me know if this helps.

Abort system error in program SAPLRRK0

Hi All,
I have gone thru many forums and I also read a post of similar problem but I think mine is diff from all of them.
When one of user is running the Query he is seeing a error message saying:
ABORT system error in program SAPLRRK0 and form RSRDR;SRRK0F30-01-.
Once he close the session and open back he is ok. I tried to refresh on my PC and I am ok and I didn't see any messages. I really don't have any idea why this is happening.
I read OSS note-734184 but it's not detailed.I don;t think we can apply support pack now because they are crunning their month end reports and there is no time to do that now.
Your responses are really appreciated!
Thanks
AP

Praveen,
Thanks for the quick info.
I went to SM21 and I saw this message on that user R49 Communication error, CPIC return code 020, SAP return code 223
But I don't know is this message related to that and because I am seeing same message for another user and she don't have any issues at all with the same query.
That surprises me!
Any clues?????

Abort system error in program SAPLRSS2 and form MULTI_ASSIGN-01-

After executing a query with RSRT, I got an error message: "Abort system error in program SAPLRSS2 and form MULTI_ASSIGN-01-".
The error appeared first after patching the SAP BW with the Enhancement Package 1 to version 7.01.
I found the note 1593976 concerning this problem. But installing the note didn't help.
I set a breakpoint at the "PERFORM MULTI_ASSIGN" - statement in the function module "RRS_GVAR_FROM_VREP_FILL" where the exception is thrown.
I compared the code of the form with the older version of the form.
Current version (7.01):
ASSIGN COMPONENT l_s_fieldname OF STRUCTURE c_sx_gvar TO <l_gvar_table>.
IF sy-subrc NE 0. PERFORM x_message USING rs_c_true 'MULTI_ASSIGN-01-'. ENDIF.
Older version (7.00):
ASSIGN COMPONENT L_FIELDNAME OF STRUCTURE C_SX_GVAR TO <L_GVAR_TABLE>.
check sy-subrc eq 0.
The newer version raises an error message where the older version only left the form. So I simulated the old program behaviour by jumping over the 2 occurences of the "PERFORM MULTI_ASSIGN" - statement, because the form doesn't do any changes anyway, when it is left right after the call. The query then seems to be executed properly.
I don't know whether the raising of a message is correct here and I already did something wrong in the old version, which hasn't been detected since EnhP 1 or if the raising of a message is not appropriate here. May you help me out in this situation ?

Thanks! That really helped me out. I thought, I already regenerated the query report. But it seems it has not been the case.

Abort characteristic error in reprot.

Similar Messages

Maybe you are looking for