Abort element structure is not correct?

hi all?
I am getting the following error abort element structure is not correct?
how to recity if ? while opening a query? and can anyone let me know what are the error messages that turns up while you work oon designer?
and how to debug it nor rectify it.
regds
hari

Hari,
Any chance you have some key figures in your structure but not in all the selections?
Try running RSRT and run your query that contains the structure in it here.
When do you get the message?
Regards
Gill

Similar Messages

Darstellung der Leuchtkasten-Teile in Firefox nicht korrekt! Lightbox-Element in Firefox not correct

Leider werden beim Erstellen einer Diashow mit Leuchtkasten die Leuchtkasten-Teile (Schließen-Schaltfläche, Erste, Letzte, Zurück, Weiter) in Firefox (aktuelle Version) um einige Pixel nach links angezeigt. In allen anderen Browsern, inkl. iPad und iPhone ist die Darstellung korrekt.
Gibt es dafür eine Lösung?
Hier ein Beispiel meiner Seite im Aufbau:
http://hofmann-wadsack.businesscatalyst.com/ausstellungen-01.html
Klick auf Miniaturen startet die Diashow mit Leuchtkasten.
Unfortunately, when you create a slideshow with lightbox the lightbox Parts (close button, First, Last, Previous, Next) Firefox (current version) are shown by a few pixels to the left. In all other browsers, including iPad and iPhone are displayed correctly.
Is there a solution?
Here's an example of my page under construction:
http://hofmann-wadsack.businesscatalyst.com/ausstellungen-01.html

Yes of course. Here are two scrennshots. The first one is from Chrome, the same as in IE and Safari. This one is correct. The second one is a screenshot from Firefox.

The below vi is not giving me what I want. If I select 2 with maximum number of 3 then there are 3 array elements display that is correct but if I select 8 with the same maximum number of 3 then only 1 array element display. Why is that?

The below vi is not giving me what I want. If I select 2 with maximum number of 3 then there are 3 array elements display that is correct but if I select 8 with the same maximum number of 3 then only 1 array element display. Why is that?
Attachments:
test2.vi ‏29 KB

It's because in case 2 you hold the array build result from the previous loop iteration in a shift register...in case 8 you do not...
You say that if you set the maximum number to three it will produce an array with three elements, that is not correct, it will run when the iteration index is 0,1,2 and 3...resulting in 4 elements. If you want 3 you need to decrement the maximum number to 2. The same goes for case 8.
MTO

In-Place Element Structures, References and Pointers, Compiler Optimization, and General Stupidity

[The title of this forum is "Labview Ideas". Although this is NOT a direct suggestion for a change or addition to Labview, it seems appropriate to me to post it in this forum.]
In-Place Element Structures, References and Pointers, Compiler Optimization, and General Stupidity
I'd like to see NI actually start a round-table discussion about VI references, Data Value references, local variables, compiler optimizations, etc. I'm a C programmer; I'm used to pointers. They are simple, functional, and well defined. If you know the data type of an object and have a pointer to it, you have the object. I am used to compilers that optimize without the user having to go to weird lengths to arrange it.
The 'reference' you get when you right click and "Create Reference" on a control or indicator seems to be merely a shorthand read/write version of the Value property that can't be wired into a flow-of-control (like the error wire) and so causes synchronization issues and race conditions. I try not to use local variables.
I use references a lot like C pointers; I pass items to SubVIs using references. But the use of references (as compared to C pointers) is really limited, and the implementation is insconsistent, not factorial in capabilites, and buggy. For instance, why can you pass an array by reference and NOT be able to determine the size of the array EXCEPT by dereferencing it and using the "Size Array" VI? I can even get references for all array elements; but I don't know how many there are...! Since arrays are represented internally in Labview as handles, and consist of basically a C-style pointer to the data, and array sizing information, why is the array handle opaque? Why doesn't the reference include operators to look at the referenced handle without instantiating a copy of the array? Why isn't there a "Size Array From Reference" VI in the library that doesn't instantiate a copy of the array locally, but just looks at the array handle?
Data Value references seem to have been invented solely for the "In-Place Element Structure". Having to write the code to obtain the Data Value Reference before using the In-Place Element Structure simply points out how different a Labview reference is from a C pointer. The Labview help page for Data Value References simply says "Creates a reference to data that you can use to transfer and access the data in a serialized way.". I've had programmers ask me if this means that the data must be accessed sequentially (serially)...!!! What exactly does that mean? For those of use who can read between the lines, it means that Labview obtains a semaphore protecting the data references so that only one thread can modify it at a time. Is that the only reason for Data Value References? To provide something that implements the semaphore???
The In-Place Element Structure talks about minimizing copying of data and compiler optimization. Those kind of optimizations are built in to the compiler in virtually every other language... with no special 'construct' needing to be placed around the code to identify that it can be performed without a local copy. Are you telling me that the Labview compiler is so stupid that it can't identify certain code threads as needing to be single-threaded when optimizing? That the USER has to wrap the code in semaphores before the compiler can figure out it should optimize??? That the compiler cannot implement single threading of parts of the user's code to improve execution efficiency?
Instead of depending on the user base to send in suggestions one-at-a-time it would be nice if NI would actually host discussions aimed at coming up with a coherent and comprehensive way to handle pointers/references/optimization etc. One of the reasons Labview is so scattered is because individual ideas are evaluated and included without any group discussion about the total environment. How about a MODERATED group, available by invitation only (based on NI interactions with users in person, via support, and on the web) to try and get discussions about Labview evolution going?
Based solely on the number of Labview bugs I've encountered and reported, I'd guess this has never been done, with the user community, or within NI itself.....

Here are some articles that can help provide some insights into LabVIEW programming and the LabVIEW compiler. They are both interesting and recommended reading for all intermediate-to-advanced LabVIEW programmers.
NI LabVIEW Compiler: Under the Hood
VI Memory Usage
The second article is a little out-of-date, as it doesn't discuss some of the newer technologies available such as the In-Place Element Structure you were referring to. However, many of the general concepts still apply. Some general notes from your post:
1. I think part of your confusion is that you are trying to use control references and local variables like you would use variables in a C program. This is not a good analogy. Control references are references to user interface controls, and should almost always be used to control the behavior and appearance of those controls, not to store or transmit data like a pointer. LabVIEW is a dataflow language. Data is intended to be stored or transmitted through wires in most cases, not in references. It is admittedly difficult to make this transition for some text-based programmers. Programming efficiently in LabVIEW sometimes requires a different mindset.
2. The LabVIEW compiler, while by no means perfect, is a complicated, feature-rich set of machinery that includes a large and growing set of optimizations. Many of these are described in the first link I posted. This includes optimizations you'd find in many programming environments, such as dead code elimination, inlining, and constant folding. One optimization in particular is called inplaceness, which is where LabVIEW determines when buffers can be reused. Contrary to your statement, the In-Place Element Structure is not always required for this optimization to take place. There are many circumstances (dating back years before the IPE structure) where LabVIEW can determine inplaceness and reuse buffers. The IPE structure simply helps users enforce inplaceness in some situations where it's not clear enough on the diagram for the LabVIEW compiler to make that determination.
The more you learn about programming in LabVIEW, the more you realize that inplaceness itself is the closest analogy to pointers in C, not control references or data references or other such things. Those features have their place, but core, fundamental LabVIEW programming does not require them.
Jarrod S.
National Instruments

Element 6 was not defined correctly

Hi gurus,
when i check my query, i was showing a System error called 'Element 6 was not defined correctly'.
when i go to details,
Diagnosis
Amounts are multiplied by values in structure element &V1& &V2&.
This does not seem to make sense.
System response
Procedure
Check the definition of the structure element &V1& &V2&.
Procedure for System Administration
Please any one can help me.
thanks in advance.

Go to the query designer and open you query. Then, modify the formula definition for element 6 and use NODIM(). In the formula editor expand Data Functions and select value Without dimension. For example: If you have the formula KeyFigure1 + KeyFigure2, then you should to define NODIM(KeyFigure1)+ NODIM(KeyFigure2)

Now, in photoshop elements 9 when editing, colours displayed are not correct, seems gama number has changes ?

up to now I had no problem when editing photos with photoshop elements 9. Due to an unknown reason/event the colours displayed , now, are not correct : it looks like the gama adjustment has been changed and the photo rendition is uncorrect. If I display the same photos with other photo editing software ( DPP from Canon for example, or Xnview) , the colours are correct !!... Can you help me ?
Thanks a lot !
JJ Etienne

Thank you for trying to help me. In fact, I resolved my problem by changing the default ICC profile for my screen : I entered the parameters settings panel, screen definition and then advanced settings where I could choose another ICC profile.
Thank you anway !!
JJ

Element 7 was not defined correctly

Hi,
I am facing a strange problem while executing any query through web. Whenever I try to execute a newly created query on a MP,it throws a warning that Element 7 is not defined correctly or some CKF is wrong. But when I exceute the same query the second time, all these messages get disappeared and the queries run normally.
I wonder if any one of you have faced the same problem, if so could you please share it with me? What is the underlying issue that causes these kinds of messages to pop -up?
Thanks.

Hi Bobs,
Most warnings (like this one) are only shown once after the last query change, so it's normal that they 'disappear'. I need some more info on the warning itself to help you, what is element 7?
Kind regards,
Alex

How to change the Element structure of a DefaultSyledDocument

Hello,
I'm trying to override the insertUpdate method of DefaultStyledDocument so that I could build my own Element structure by adding my own BranchElement- and LeafElement-s. If I examine the Element hierarchy everything seems OK. But when I use my document in a JTextPane. I get the error Exception in thread "AWT-EventQueue-0" javax.swing.text.StateInvariantError: GlyphView: Stale view: javax.swing.text.BadLocationException: Invalid location (I add the whole dump at the end of this message), whenever I add a new line to the document (to test this compile and run the included code and press then newline after the 'He' in 'Hello'. I suspect that the error is caused by the fact that the view hierarchy is not updated correctly but I'm not sure. To be honest I have searched for a while for some example code, explaning how you can make your own element hierarchy in a DefaultStyledDocument (without using ElementBuffer), but to no avail.
Can any of the Text gurus here shed some lights on my code and see what is wrong with it or point me to some example code.
Thanks a lot in advance.
Marc Mertens
Full Stack Dump
Exception in thread "AWT-EventQueue-0" javax.swing.text.StateInvariantError: GlyphView: Stale view: javax.swing.text.BadLocationException: Invalid location
at javax.swing.text.GlyphView.getText(GlyphView.java:117)
at javax.swing.text.GlyphPainter1.getSpan(GlyphPainter1.java:43)
at javax.swing.text.GlyphView.getPreferredSpan(GlyphView.java:537)
at javax.swing.text.FlowView$LogicalView.getPreferredSpan(FlowView.java:689)
at javax.swing.text.FlowView.calculateMinorAxisRequirements(FlowView.java:216)
at javax.swing.text.BoxView.checkRequests(BoxView.java:911)
at javax.swing.text.BoxView.getMinimumSpan(BoxView.java:542)
at javax.swing.text.BoxView.calculateMinorAxisRequirements(BoxView.java:879)
at javax.swing.text.BoxView.checkRequests(BoxView.java:911)
at javax.swing.text.BoxView.setSpanOnAxis(BoxView.java:325)
at javax.swing.text.BoxView.layout(BoxView.java:682)
at javax.swing.text.BoxView.setSize(BoxView.java:379)
at javax.swing.plaf.basic.BasicTextUI$RootView.setSize(BasicTextUI.java:1618)
at javax.swing.plaf.basic.BasicTextUI.getPreferredSize(BasicTextUI.java:812)
at javax.swing.JComponent.getPreferredSize(JComponent.java:1615)
at javax.swing.JEditorPane.getPreferredSize(JEditorPane.java:1227)
at javax.swing.ScrollPaneLayout.layoutContainer(ScrollPaneLayout.java:769)
at java.awt.Container.layout(Container.java:1401)
at java.awt.Container.doLayout(Container.java:1390)
at java.awt.Container.validateTree(Container.java:1473)
at java.awt.Container.validate(Container.java:1448)
at javax.swing.RepaintManager.validateInvalidComponents(RepaintManager.java:379)
at javax.swing.SystemEventQueueUtilities$ComponentWorkRequest.run(SystemEventQueueUtilities.java:113)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
Exception in thread "AWT-EventQueue-0" javax.swing.text.StateInvariantError: GlyphView: Stale view: javax.swing.text.BadLocationException: Invalid location
at javax.swing.text.GlyphView.getText(GlyphView.java:117)
at javax.swing.text.GlyphPainter1.getSpan(GlyphPainter1.java:43)
at javax.swing.text.GlyphView.getPreferredSpan(GlyphView.java:537)
at javax.swing.text.FlowView$LogicalView.getPreferredSpan(FlowView.java:689)
at javax.swing.text.FlowView.calculateMinorAxisRequirements(FlowView.java:216)
at javax.swing.text.BoxView.checkRequests(BoxView.java:911)
at javax.swing.text.BoxView.getMinimumSpan(BoxView.java:542)
at javax.swing.text.BoxView.calculateMinorAxisRequirements(BoxView.java:879)
at javax.swing.text.BoxView.checkRequests(BoxView.java:911)
at javax.swing.text.BoxView.setSpanOnAxis(BoxView.java:325)
at javax.swing.text.BoxView.layout(BoxView.java:682)
at javax.swing.text.BoxView.setSize(BoxView.java:379)
at javax.swing.plaf.basic.BasicTextUI$RootView.setSize(BasicTextUI.java:1618)
at javax.swing.plaf.basic.BasicTextUI.modelToView(BasicTextUI.java:946)
at javax.swing.text.DefaultCaret.repaintNewCaret(DefaultCaret.java:1246)
at javax.swing.text.DefaultCaret$1.run(DefaultCaret.java:1225)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
Exception in thread "AWT-EventQueue-0" javax.swing.text.StateInvariantError: GlyphView: Stale view: javax.swing.text.BadLocationException: Invalid location
at javax.swing.text.GlyphView.getText(GlyphView.java:117)
at javax.swing.text.GlyphPainter1.getSpan(GlyphPainter1.java:43)
at javax.swing.text.GlyphView.getPreferredSpan(GlyphView.java:537)
at javax.swing.text.FlowView$LogicalView.getPreferredSpan(FlowView.java:689)
at javax.swing.text.FlowView.calculateMinorAxisRequirements(FlowView.java:216)
at javax.swing.text.BoxView.checkRequests(BoxView.java:911)
at javax.swing.text.BoxView.getMinimumSpan(BoxView.java:542)
at javax.swing.text.BoxView.calculateMinorAxisRequirements(BoxView.java:879)
at javax.swing.text.BoxView.checkRequests(BoxView.java:911)
at javax.swing.text.BoxView.setSpanOnAxis(BoxView.java:325)
at javax.swing.text.BoxView.layout(BoxView.java:682)
at javax.swing.text.BoxView.setSize(BoxView.java:379)
at javax.swing.plaf.basic.BasicTextUI$RootView.setSize(BasicTextUI.java:1618)
at javax.swing.plaf.basic.BasicTextUI.modelToView(BasicTextUI.java:946)
at javax.swing.text.DefaultCaret.setVisible(DefaultCaret.java:952)
at javax.swing.text.DefaultCaret.focusLost(DefaultCaret.java:347)
at java.awt.AWTEventMulticaster.focusLost(AWTEventMulticaster.java:172)
at java.awt.Component.processFocusEvent(Component.java:5380)
at java.awt.Component.processEvent(Component.java:5244)
at java.awt.Container.processEvent(Container.java:1966)
at java.awt.Component.dispatchEventImpl(Component.java:3955)
at java.awt.Container.dispatchEventImpl(Container.java:2024)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.KeyboardFocusManager.redispatchEvent(KeyboardFocusManager.java:1810)
at java.awt.DefaultKeyboardFocusManager.typeAheadAssertions(DefaultKeyboardFocusManager.java:840)
at java.awt.DefaultKeyboardFocusManager.dispatchEvent(DefaultKeyboardFocusManager.java:530)
at java.awt.Component.dispatchEventImpl(Component.java:3841)
at java.awt.Container.dispatchEventImpl(Container.java:2024)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
at java.awt.SentEvent.dispatch(SentEvent.java:50)
at java.awt.DefaultKeyboardFocusManager$DefaultKeyboardFocusManagerSentEvent.dispatch(DefaultKeyboardFocusManager.java:161)
at java.awt.DefaultKeyboardFocusManager.sendMessage(DefaultKeyboardFocusManager.java:188)
at java.awt.DefaultKeyboardFocusManager.dispatchEvent(DefaultKeyboardFocusManager.java:595)
at java.awt.Component.dispatchEventImpl(Component.java:3841)
at java.awt.Container.dispatchEventImpl(Container.java:2024)
at java.awt.Window.dispatchEventImpl(Window.java:1778)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
at java.awt.SequencedEvent.dispatch(SequencedEvent.java:93)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
java.lang.ThreadDeath
at java.lang.Thread.stop(Thread.java:698)
at java.lang.ThreadGroup.stopOrSuspend(ThreadGroup.java:671)
at java.lang.ThreadGroup.stop(ThreadGroup.java:584)
at org.netbeans.core.execution.DefaultSysProcess.stop(DefaultSysProcess.java:54)
at org.netbeans.core.execution.ProcessNodeItem$1.stop(ProcessNodeItem.java:41)
at org.netbeans.core.execution.ProcessNodeItem$TerminateProcessAction.performAction(ProcessNodeItem.java:69)
at org.openide.util.actions.NodeAction$3.run(NodeAction.java:531)
at org.netbeans.modules.openide.util.ActionsBridge.doPerformAction(ActionsBridge.java:47)
at org.openide.util.actions.NodeAction$DelegateAction.actionPerformed(NodeAction.java:527)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.AbstractButton.doClick(AbstractButton.java:302)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1000)
at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1041)
at java.awt.Component.processMouseEvent(Component.java:5488)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
at java.awt.Component.processEvent(Component.java:5253)
at java.awt.Container.processEvent(Container.java:1966)
at java.awt.Component.dispatchEventImpl(Component.java:3955)
at java.awt.Container.dispatchEventImpl(Container.java:2024)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
at java.awt.Container.dispatchEventImpl(Container.java:2010)
at java.awt.Window.dispatchEventImpl(Window.java:1778)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
package Document;
import java.util.*;
import javax.swing.*;
import javax.swing.event.*;
import javax.swing.text.*;
import javax.swing.text.AbstractDocument.*;
* EditorDocument.java
* Created on September 10, 2006, 3:58 PM
* To change this template, choose Tools | Template Manager
* and open the template in the editor.
* Document to represent the content of a syntax highlighting editor
* @author marc
public class EditorDocument extends DefaultStyledDocument {
 /** List of the white space characters */
 private char[] _whiteSpaceChars;
 /** List of the delimiter characters */
 private char[] _delimiterChars;
 /** Creates a new instance of EditorDocument */
 public EditorDocument(char[] whiteSpaceChars,char[] delimiterChars) {
 _whiteSpaceChars=whiteSpaceChars;
 _delimiterChars=delimiterChars;
 * Updates document structure as a result of text insertion. This
 * will happen within a write lock. Since this document simply
 * maps out lines, we refresh the line map.
 * @param chng the change event describing the dit
 * @param attr the set of attributes for the inserted text
 protected void insertUpdate(AbstractDocument.DefaultDocumentEvent chng, AttributeSet attr) {
 int begin=Math.max(0,chng.getOffset()-1);
 int end=begin+chng.getLength()+1;
 Element rootElement=getDefaultRootElement();
 int index;
 int m=rootElement.getElementCount();
 AbstractDocument.BranchElement line;
 super.insertUpdate(chng,attr);
 // Add the tokens
 index=rootElement.getElementIndex(begin);
 m=rootElement.getElementCount();
 if (index>=0)
 for (;index<m && (line=(AbstractDocument.BranchElement) rootElement.getElement(index)).getStartOffset()<=end;index++) {
 chng.addEdit(addTokens(line,attr));
 //fireChangedUpdate(chng);
 protected void insertUpdate(AbstractDocument.DefaultDocumentEvent chng,AttributeSet attr) {
 int begin=chng.getOffset();
 int end=begin+chng.getLength();
 BranchElement root=(BranchElement) getDefaultRootElement();
 // Find the lines that must be removed
 int indexFirstLine=root.getElementIndex(begin);
 int indexLastLine=root.getElementIndex(end);
 BranchElement[] removeLines=new BranchElement[indexLastLine-indexFirstLine+1];
 for (int i=indexFirstLine;i<=indexLastLine;i++)
 removeLines=(BranchElement) root.getElement(i);
// Add the lines must replace the removed lines
int beginFirstLine=removeLines[0].getStartOffset();
int endLastLine=removeLines[removeLines.length-1].getEndOffset();
Segment segment=new Segment();
ArrayList<BranchElement> newLines=new ArrayList<BranchElement>(removeLines.length); // Guess the length of the new lines
try {
getText(beginFirstLine,endLastLine,segment);
char c=segment.current();
BranchElement line;
while (c!=Segment.DONE) {
if (c=='\n') {
line=new BranchElement(root,attr);
newLines.add(line);
addTokens(line,attr,beginFirstLine,segment.getIndex()+1);
beginFirstLine=segment.getIndex()+1;
c=segment.next();
if (beginFirstLine<endLastLine) {
line=new BranchElement(root,attr);
newLines.add(line);
addTokens(line,attr,beginFirstLine,endLastLine);
// Add the lines to the Root element
BranchElement[] linesAdded=newLines.toArray(new BranchElement[newLines.size()]);
root.replace(indexFirstLine,indexLastLine-indexFirstLine+1,linesAdded);
// Notify listeners
DefaultDocumentEvent edit=new DefaultDocumentEvent(begin,end-begin,DefaultDocumentEvent.EventType.CHANGE);
edit.addEdit(new ElementEdit(root,indexFirstLine,removeLines,linesAdded));
fireChangedUpdate(edit);
} catch (Exception e) {
throw new EditorException("Error in insertUpdate, message was "+e.getMessage(),e);
//super.insertUpdate(chng,attr);
private void addTokens(AbstractDocument.BranchElement line,AttributeSet attr,int begin,int end) {
try {
ArrayList<TokenElement> childTokens=new ArrayList<TokenElement>();
int strLength=end-begin;
// Create the new tokens
Segment segment=new Segment();
getText(begin,end-begin,segment);
char c;
int b=0;
TokenElement token;
//System.out.println(str);
c=segment.current();
while (c!=Segment.DONE) {
if (isWhite(c)) {
// Whitespace character
if (b<segment.getIndex()) {
token=new TokenElement(line,attr,begin+b,begin+segment.getIndex(),false);
childTokens.add(token);
b=segment.getIndex();
// Find all the white spaces
while ((c=segment.next())!=Segment.DONE && isWhite(c));
token=new TokenElement(line,attr,begin+b,begin+segment.getIndex(),true);
childTokens.add(token);
b=segment.getIndex(); // Begin of next token
} else if (isDelimiter(c)) {
// Delimiter
if (b<segment.getIndex()) {
token=new TokenElement(line,attr,begin+b,begin+segment.getIndex(),false);
childTokens.add(token);
token=new TokenElement(line,attr,begin+segment.getIndex(),begin+segment.getIndex(),c);
childTokens.add(token);
b=segment.getIndex();
c=segment.next();
} else {
c=segment.next();
if (b<segment.getIndex()) {
token=new TokenElement(line,attr,begin+b,begin+segment.getIndex(),false);
childTokens.add(token);
Element[] removed=new Element[line.getElementCount()];
for (int i=0;i<removed.length;i++)
removed[i]=line.getElement(i);
TokenElement[] newElements=childTokens.toArray(new TokenElement[childTokens.size()]);
line.replace(0,line.getElementCount(),newElements);
} catch (Exception e) {
throw new EditorException("Unexpected BadlocationException ");
* Returns a iterator of the tokens starting from the given position
* @param The position that is covered by the first token returned by this iterator
* @return A iterator of all the tokens starting at the given position
public Iterator<IToken> getTokensFrom(int position) {
return new TokenIterator(position);
private String getText(Element element) {
int begin=element.getStartOffset();
int end=Math.min(element.getEndOffset(),getLength());
try {
return getText(begin,end-begin);
} catch (BadLocationException e) {
throw new EditorException("Unexpected BadLocationException (this should not happen at all)");
* Check if a character is a white space
* @return True if a character is a white space
private boolean isWhite(char c) {
if (c=='\n') // End of line is always a white space
return true;
for (char whiteChar : _whiteSpaceChars)
if (whiteChar==c)
return true;
return false;
* Check if a character is a delimiter character (different from a white space character)
* @return True if a character is a delimiter character
private boolean isDelimiter(char c) {
for (char delimiterChar : _delimiterChars)
if (delimiterChar==c)
return true;
return c=='\0';
* Test code
public static void main(String[] args) {
// Display a test frame containing a test document
try {
JFrame frm=new JFrame();
EditorDocument doc=new EditorDocument(new char[] {' ','\n','\t','\r'},new char[0]);
doc.insertString(0,"Hello",null);
JTextPane pane=new JTextPane(doc);
JScrollPane scroll=new JScrollPane(pane);
frm.getContentPane().add(scroll);
frm.setSize(200,300);
frm.setVisible(true);
} catch (Exception e) {
* Class that is a iterator over the tokens in the document
private class TokenIterator implements Iterator<IToken> {
private int _lineIndex=-1;
private int _tokenIndex=-1;
public TokenIterator(int position) {
AbstractDocument.BranchElement root=(AbstractDocument.BranchElement) getDefaultRootElement();
_lineIndex=root.getElementIndex(position);
AbstractDocument.BranchElement line=(AbstractDocument.BranchElement) root.getElement(_lineIndex);
_tokenIndex=line.getElementIndex(position)-1;
* Removes from the underlying collection the last element returned by the
* iterator (optional operation). This method can be called only once per
* call to <tt>next</tt>. The behavior of an iterator is unspecified if
* the underlying collection is modified while the iteration is in
* progress in any way other than by calling this method.
* @exception UnsupportedOperationException if the <tt>remove</tt>
* operation is not supported by this Iterator.
* @exception IllegalStateException if the <tt>next</tt> method has not
* yet been called, or the <tt>remove</tt> method has already
* been called after the last call to the <tt>next</tt>
* method.
public void remove() {
// Do nothing
* Returns the next element in the iteration. Calling this method
* repeatedly until the {@link #hasNext()} method returns false will
* return each element in the underlying collection exactly once.
* @return the next element in the iteration.
* @exception NoSuchElementException iteration has no more elements.
public IToken next() {
Element root=getDefaultRootElement();
if (_lineIndex>=root.getElementCount())
return null;
Element line=root.getElement(_lineIndex);
_tokenIndex++;
if (_tokenIndex>=line.getElementCount()) {
_lineIndex++;
if (_lineIndex>=root.getElementCount())
return null;
line=root.getElement(_lineIndex);
if (line.getElementCount()==0)
return null;
_tokenIndex=0;
return (IToken) line.getElement(_tokenIndex);
* Returns <tt>true</tt> if the iteration has more elements. (In other
* words, returns <tt>true</tt> if <tt>next</tt> would return an element
* rather than throwing an exception.)
* @return <tt>true</tt> if the iterator has more elements.
public boolean hasNext() {
int lineIndex=_lineIndex;
int tokenIndex=_tokenIndex;
Element root=getDefaultRootElement();
if (lineIndex>=root.getElementCount())
return false;
Element line=root.getElement(lineIndex);
tokenIndex++;
if (tokenIndex>=line.getElementCount()) {
lineIndex++;
if (lineIndex>=root.getElementCount())
return false;
line=root.getElement(lineIndex);
if (line.getElementCount()==0)
return false;
return true;
* Represents a token in the document
private class TokenElement extends AbstractDocument.LeafElement implements IToken, Comparable<TokenElement> {
private boolean _isWhiteSpace;
private char _separatorChar='\0';
public TokenElement(Element parent,AttributeSet attributeSet,int offs0,int offs1,boolean whiteSpace) {
super(parent,attributeSet,offs0,offs1);
_isWhiteSpace=whiteSpace;
public TokenElement(Element parent,AttributeSet attributeSet,int offs0,int offs1,char separatorChar) {
super(parent,attributeSet,offs0,offs1);
_separatorChar=separatorChar;
* Returns the separator character if this token is a separator, returns '\0' otherwise
* @return The separator charactor or null otherwise
public char getSeparatorChar() {
return _separatorChar;
* Compares this object with the specified object for order. Returns a
* negative integer, zero, or a positive integer as this object is less
* than, equal to, or greater than the specified object.
* In the foregoing description, the notation
* <tt>sgn(</tt>expression<tt>)</tt> designates the mathematical
* signum function, which is defined to return one of <tt>-1</tt>,
* <tt>0</tt>, or <tt>1</tt> according to whether the value of expression
* is negative, zero or positive.
* The implementor must ensure <tt>sgn(x.compareTo(y)) ==
* -sgn(y.compareTo(x))</tt> for all <tt>x</tt> and <tt>y</tt>. (This
* implies that <tt>x.compareTo(y)</tt> must throw an exception iff
* <tt>y.compareTo(x)</tt> throws an exception.)
* The implementor must also ensure that the relation is transitive:
* <tt>(x.compareTo(y)>0 && y.compareTo(z)>0)</tt> implies
* <tt>x.compareTo(z)>0</tt>.
* Finally, the implementer must ensure that <tt>x.compareTo(y)==0</tt>
* implies that <tt>sgn(x.compareTo(z)) == sgn(y.compareTo(z))</tt>, for
* all <tt>z</tt>.
* It is strongly recommended, but not strictly required that
* <tt>(x.compareTo(y)==0) == (x.equals(y))</tt>. Generally speaking, any
* class that implements the <tt>Comparable</tt> interface and violates
* this condition should clearly indicate this fact. The recommended
* language is "Note: this class has a natural ordering that is
* inconsistent with equals."
* @param o the Object to be compared.
* @return a negative integer, zero, or a positive integer as this object
* is less than, equal to, or greater than the specified object.
* @throws ClassCastException if the specified object's type prevents it
* from being compared to this Object.
public int compareTo(TokenElement o) {
return getStartOffset()-o.getStartOffset();
* Indicates this is a white space token
* @return true if this is a white space token false otherwise
public boolean isWhiteSpace() {
return _isWhiteSpace;
* Returns the string this token is representing
* @return The string behind this token
public String getText() {
return EditorDocument.this.getText(this);
class SearchToken implements IToken {
private int _offset;
public SearchToken(int offset) {
_offset=offset;
* @return The start of the token used in comparisation operations
public int getEndOffset() {
return _offset;
public int getStartOffset() {
return _offset;
public boolean isWhiteSpace() {
throw new EditorException("May not be called");
public String getText() {
throw new EditorException("May not be called");
public char getSeparatorChar() {
throw new EditorException("May not be called");

I am trying to add primitive syntax highlighting to my JTextPane and have serious problems which I already stated in this forum. Now I read from uncle_alice that the text package from swing is not ment for that and that I need to write my own JTextPane and my own document and view.
Can you explain what you mean by "writing my own JTextPane and View and Dcoument".
My own Document I already have in order to provide SQL-highlighting.
But what exactly do you mean by suggesting to write my own View! Whoever uses JTextPane doesnt really have much to do with its view. Can you give me a hint as I am completely stuck with an Exception : "javax.swing.text.StateInvariantError: GlyphView: Stale view: javax.swing.text.BadLocationException: Length must be positive"
can you pinpoint the standard text-package's deficiency? it lacks what? what is the best work around?
cheers
ioannis

Cost element 7000218 is not assigned to a cost component in CostCompStruct

Dear All,
How to change the standard price in MR21 for materials with Price Determination Control 3 ( header level V & 3) (Split level S & 3)
In MR21, when I am updating the price for initial stock uploading.
It throws me a error Cost element 7000218 is not assigned to a cost component in CostComp Struct 01
Actually the cost component structure 01 is not active. we are using OP cost component structure & it is active , further the assigned to the company code level.
Cost element 7000218 is assigned to the cost component structure OP.
please suggest why it result in above error, even though we are not using cost component structure 01.
Regards
Subbu.

Hi,
Did you change the cost component structure assignment for the plant ?
This error could be produced due to the fact that for this plant the cost component struture was changed from 01
But ML tables makes reference to the old cost component structure.
You can check table CKMLKEV.
During the creation of the material the system creates data for the current, previous and last period of the last year (12 2010).
Therefore the system tries/ needs to create also a cost componet split for the period 12 2010. For this it must used the cost component structure for this period 12 2010 (maybe 01).
In such a case you have to define the cost element in '01' as well.
Please do read note 434873 carefully for the side effect and correct procedure to change cost component structure.
regards
Waman

AC20000027 - Element PURCHASINGCONTRACT is not available in the container

Hi Experts,
I created the simple WF. Start event - RELEASESTEPCREATED, object - BUS2012. WF have one step, task - "TS20000166 Release of purchase order". When I start my workflow in test run the status is set to "error" - "Element PURCHASINGCONTRACT is not available in the container", Message no. OL356.
Testing the WF in transaction SWUD don't found any errors.
Can anybody help me with this?
Thanks a lot,
Andrei

Hi Andru,
I worked on Release strategy for PO.
I am SURE the Problem is with RULE, RULE is not returning any agents.
The problem is that the rule (20000027) your using is not returning any agents.
1. Just go to transaction PFAC and enter the RULE. go to display mode.
Click on the second button in the application tool bar (SIMULATE RULE RESOLUTION - shift + F8 ) a popup sort of screen will be displayed.
Now enter the PO number and Release code.
Execute the DETAIL button in the middle of the popup screen.
See if the rule is returning any agents.
2. If the above mentioned test is successfully executed,
Check in your workflow SWDD.
Open your workflow.
Double click on the RELEASE CODE workflow container element.
Check if the structure defined under D.Type is - T16FC and Field is - FRGCO.
3. If even the 2nd point is correct,
Check the binding for the step '0000000004'
In the binding, Pass the Busines Object BUS2012 (Purchase order) and RELEASE CODE (T16FC-FRGCO) that are present in the Workflow container. and check if they both are import and export parameters.
3. You are sure that the agents are specified in SPRO (under Material management >> PURCHASING >> Purchase order/CONTRACT >> Release Procedure for PO/CONTRACT >> Define release procedure for PO / CONTRACT >> WORKFLOW )
If you double click on WORKFLOW, you will see that the AGENT IDs are assigned to the Release Group and release codes of Purchase Order.
Eg: Release group       Release code Agent Type        Agent ID
            01                          L1               US                SAPUSER1
            01                          L2               US                SAPUSER2
            01                          L3               US                SAPUSER3
            01                          L4               US                SAPUSER4
Try all this and tell me the result.
Regards,
Gautham Paspala

Using LV Class Property Nodes in In-place Element structure causes the code to halt

I have some code written in LV RT 2010 that uses property nodes from a LVOOP class that I created. I am using access the property node from inside an in-place element structure. When the code reaches the property node, LabVIEW stops running. (as if the abort button was pressed). I verified this behaviour using highlight execution. When I remove the in-place structure code runs fine.
Is this is know bug in LabVIEW? Is there a CAR to resolve this created for a future release?

Bob,
I tried to reproduce the behavior you're seeing by recreating the Trigger and Trigger List classes, but I have not been able to reproduce it. Please take a look at my version of the project in the attached zip file. Take a look at Test.vi, and feel free to modify and repost it to show me how to make the problem occur. I would like to file a CAR to make sure we get the problem fixed, but I will need to be able to reliably reproduce it first.
On a similar note, you can get much better performance out of the Process Triggers VI by preallocating the list array, instead of using build array in a loop. Take a look at Process Triggers2.vi in my project. You can run Benchmark.vi to see the performance difference between the two different approaches.
Chris M
Attachments:
triggerlist test.zip ‏165 KB

"The extract structure is not permitted"

Hi,
I created a new datasource on R/3 system over a table Z*. Always works fine until I created a new append structure to enable load more data from new appended fields.
The problem is that when I access to the datasource using tcode RSO2, I click on the save button and a error message is displayed below with the following text: "The extract structure is not permitted".
I already activated the structure referred as the append extraction structure too. If i try to access to that structure by RSA6 tcode, i can do it, however the same it is not possible using RSO2.
This only happens to the datasource created using a tabel Z*. I created too another datasource, but using a table standard and it works good.
Can anyone, please, help me with this thread?
Many thanks in advance.
Kind regards,

Hi Ravi, Vinay and Suman,
Thanks a lot for your answers.
Unfortunately, my question hasn't been solved yet.
I have, correctly, assigned Ref tables and Ref fields for Currency /Quantity fields.
This error message only happens when i add the append structure on the datasource. If i remove the append structure created, datasource works fine. So, this means that the problem is related with this append.
I have another datasource created over a standard table and i added the same append structure with same fields and data elements, and i have no problems at all.
This is happening only with this Z* datasource created over a Z* structure.
Any more ideas, please?
Many thanks!
Kind regards,
HT

When I click on a picture, Photoshop Elements 12 does not automatically open.

When I click on a picture, Photoshop Elements 12 does not automatically open (as it did when I used previous versions Photoshop Elements 4 and 9). I can't even right-click (Windows) on the picture and choose Open With and specifiy Photoshop Elements 12. I have called Adobe several times (Case No. 185140584) and they keep saying it has been sent up to senior management and they will call me back with a solution - but to no avail! No return calls and I still can't really use the Product I paid for and downloaded. The only way I can open up a picture to edit it is to open Photoshop Elements 12 and then then click "Open" and then search for the picture on my hard drive (which takes a lot more time! I did not experience this difficulty at all with versions 4 or 9!

Hi,
You failed to say which Windows system you have - I can get the "Open With" to work on my Windows 7 64bit system.
When you try to set up the "Open With", are you setting the correct target program?
It's the green one (not the red one) in the above image.
Once you have selected that program, make sure you set it as default so that a double click will open the photo in the editor.
Good luck
Brian

Error (Data mining): The specified mining structure does not contain a valid model for the current task.

I'm trying to run the Cross validation report on a mining structure that contains just Microsoft Association Rules mining model. In Target Attribute, I've tried:
Actual(Service Description).SE value
Actual([Service Description]).[SE value]
Actual(Service Description)
Actual([Service Description])
just because i don't know what is the exact correct format, but none of them worked, and I always get the following error:
Error (Data mining): The specified mining structure does not contain a valid model for the current task.
the following is my mining model structure

Association rules does not allow for cross-validation
Mark Tabladillo PhD (MVP, SAS Expert; MCT, MCITP, MCAD .NET) http://www.marktab.net

Photoshop Elements 12 does not install on Win 8.1 64bit

Hi!
My system: Windows 8.1 64 bit with all patches, 32GB Ram and engough HD space.
I downloaded PSE 12 32bit and Premiere Elements 12 64bit. Both won't install.
Problems:
Premiere: Installation fails when shared components should be installed. I spent more than 2hrs trying every tip I found in forums. Same result.
Photoshop: It always tries to deinstall Elements 12 (which is definetely not installed) and fails becaus of "Specified path is empty". It was never fully installed. I cleaned all folders manually, I deleted registry entries according forum advise. I rebooted. I put the installation files onto C:. Before I installed, I deinstalled Elements 9. I also cleaned those files. An no, I did not deinstall my Antivirus. I cannot deactivate it and deinstalling is a very very bad option.
What I already tried:
10 reboots
Deinstall old version
Clean Temp folder
Clean Registry
Delete all folders and hopefull all registry "Elements" entries
Archive OOBE Folder
Moved installation Files to C:
Start Installation as Administrator
Monitored if any other Adobe program is running - killed all
Any help is much apreshiated. I am desperate and about to return the products.
Michael
Added solution attempts.

Ok, I had many problems with the installation, but after three attempts I've got it working. This might work with a previously failed installation - but there are other guides in the forum to get this position -thanks also to the many threads on the this - which pointed me in the right direction
Previously I'd had issues with Error 1935, (on Shared Technologies), Blue screens due to clbudf.sys from Cyberlink Instant burn which blue screened (thread abort exception) this install as also iTunes. (I haven't installed this now...
My scenario. Win 7 (clean) -> Win 8 -> Win 8.1
After setting up the setting up the system.
I ensured the following : (although begrudingly) so I could do a system restore if needed.
-I disabled Anitvirus & Firewall
-enabled Volume Shadow Copy Service
I then ensured I had downloaded Adobe Application Manager 8.0 (read this may help) - I installed - but I did not run it as I believe it updates to Adobe CC Manager( from previous attempts)
i also downloaded and installed the 32 bit versions of :
C++2008 redistributable (32 bit)
C++2008 SP1 redistributable (32 bit)
I installed Premiere Elements (64 bit) - note I had previously installed Sony Vegas 10 Platinum, which downloaded and installed NET 3.5/Net 2.0 adding to windows features, which many have helped - not sure.
I installed Photoshop Elements (32 bit)
I started both apps and updated them to 12.1.
Happy ... finally - hope this helps others - or at least helps adobe improve their installer, diagnose the issue for others.

Abort element structure is not correct?

Similar Messages

Maybe you are looking for