Abort Execution leaves USB port open

My VI opens a USB port and then processes the data in a while loop for as long as I let it run. When I manually exit the while loop the VI closes the USB port and then stops execution. Using the start control starts the loop again and the VI runs. However if I use the abort execution button on the toolbar the VI stops without closing the USB port and the VI will not run again unless I close and reopen it. How do I avoid this problem?
Solved!
Go to Solution.

So I suggest always stop the program from the front panel button.
You can hide the toolbar so that the the abort button can not be clicked.
Best Regards
Hu Yu

Similar Messages

Why does my nook open iphoto when i plug it in the usb port on the back of my imac running 10.6.8

I have downloaded Adobe Digital Editions and downloaded Overdrive from the public library. When I plug the Nook eReader in the USB port in the back of the iMac, iPhoto opens immediately. I know this is not a forum for Nook eReaders, but I have to start somewhere and figured since iPhoto is opening automatically, maybe someone can give me a clue.
thank you,

Most likely, because your Mac and iPhoto think that you have connected a camera or mass storage device that has images on it.
Not sure where to go from there, but I would start by looking at the setting in both iPhoto Preferences and Image Capture if I wanted iPhoto to ignore that device.

Hi skydiver, I have ios7.4, I tried two different USB ports and it still doesn't show,up on my desktops in my computer as iPad so I can't click it. If it was there I would open and see all my photos, and YES it ask me DO I trust this computer! several tim

Hi skydiver, I have ios7.4, I tried two different USB ports and it still doesn't show,up on my desktop in my computer as iPad so I can't click it. If it was there I would open and see all my photos, and YES it ask me DO I trust this computer! several times.
The apple tech on the phone, went to my control,panel
Went to my devices. Original iPad showed up,there In red and then he had me go,to apple website, download something and it said it could configure to my computer.
Is,finally answer,to me was go to the apple care,one on one appointment, and it's my "software"
A man I know told me "Apple at store, won't be able to do,anything for me"
That's not very positive.
What else? Can't I download iPad drivers,into my computer?

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
 Cheers, Tom

Unable to open USB port device file: Permission denied

I have an up-to-date system (full "pacman -Syu" yesterday), I am in a "lp" group and the printer (Canon Pixma MP270) started to give "Unable to open USB port device file: Permission denied" error, although in the past it worked and still works in Windows. Doesn't anybody have a similar problem?

Thanks for reply.
CUPS worked, I could use CUPS-PDF and localhost:631 was accessible and working.
Today I managed to print again. I did "pacman -Rcsn cups" and reinstalled it again.
My printer is Canon Pixma MP270 and so far it wasn't the best choice for Arch Linux—scanning works fine but it's like throwing a coin when it comes to printing. I've written a simple PKGBUILD for installing its printing driver as a regular package, but I don't know what to set as a license.
pkgname=mp270-printer
pkgver=3.20
pkgrel=1
pkgdesc="Canon Pixma MP270 printer driver"
arch=('i686')
url="http://software.canon-europe.com/products/0010753.asp"
license=('unknown')
depends=('libpng12' 'gtk2' 'popt')
makedepends=('deb2targz')
source=(http://files.canon-europe.com/files/soft37268/software/MP270_debian_driver_pack.tar)
md5sums=('d26c36e2d1799ddc09e644dc7765f0a3')
build() {
cd $srcdir
tar xzf cnijfilter-mp270series-$pkgver-1-i386-deb.tar.gz
cd cnijfilter-mp270series-$pkgver-1-i386-deb/packages
deb2targz *
tar xzf cnijfilter-common_$pkgver-1_i386.tar.gz
tar xzf cnijfilter-mp270series_$pkgver-1_i386.tar.gz
ln -s /usr/lib/libtiff.so usr/lib/libtiff.so.4
package () {
cd $srcdir/cnijfilter-mp270series-$pkgver-1-i386-deb/packages
cp -r usr $pkgdir/

How to open computer hp 2000 to fix loose usb port connector?

how to open computer hp 2000 to fix loose usb port connector?

Here is the Manual:
Manual
The usb ports on the right, next to the power jack, are on a daughterboard and fairly easily replaceable but the left usb port next to the HDMI is on the motherboard. The only way to repair it is to resolder it to the motherboard. Good luck.
If this is "the Answer" please click "Accept as Solution" to help others find it.

Problems opening apps when connected 2 USB port and after

I'm having some problems with my new iphone 3g S... the time I connect my iPhone 2 a USB port it starts charging and sync all my content. The problem is that after the synchronization, when connected and after I disconnect it, I just can’t open any applications I installed! When I try 2 open any apps, the app just blink (the initial screen from the app is shown in half a second) and then it just closes by itself… Am I missing anything here? I find that really weird… I appreciate your help!

Try this: Connect iPhone to your computer. In iTunes on your computer, deselect one of apps to remove it from your phone & sync. This should remove the app from your phone. Now delete the app from iTunes on your computer. Download the app from iTunes on your iPhone & resync. This should put a clean version of the app back on your computer. Hope this helps.
Message was edited by: James Acomb1
Message was edited by: James Acomb1

When i open i-movie it ejects my back up disc which is via a usb port.

When i open i-movie it ejects my back up disc which is via a usb port.

Hmmmm,
Did you load some movie or project off another USB device at some time recently?
What happens if you then unplug the drive & plug it back in when iMovie is running?

Cant open usb port nokia 6300

hey for some reson i cant open my phone's (6300) usb port...can somebody plz tell me or otherwise show me how to open it. i want to insert the usb cable into the phone for data transfer.

and if you hear any cracking or a noise you shouldn't hear don't continue you don't want to break it. If someone from a shop does it they can replace it.
Phones owned: 7
Nokia: 6
Models:
3310,3200,6610i,6060,6233,6120c
Current: 6120c and loving it.

My iPod touch 4th gen iOS5.1.1 can't be recognised by my computer and I have tried different cables and usb ports but nothing has worked. The iPod is brand new and was only opened today. Any ideas on how to fix this?

I have just today recieved a brand new iPod Touch 4th generation iPod with the latest update. Everything else on the ipod is working and my computer is able to read the camera fine, but iTunes cannot recognise it - even after restarting and trying different USB ports and cables. There is nothing at all coming up on the device list and iTunes is working as it would if I had no iPod plugged in. This is my first iPod on this computer and I have already tried redownloading iTunes. My computer is a windows XP computer. Does anyone have any idea on how to fix this problem?

Since this is an XP machine, which version of iTunes do you have installed? Is it the latest version?
Have you tried starting iTunes, attach the USB end of the cable, then while holding the home button on the iPod connect the 30-pin connector end of the cable to the iPod...that is the recovery mode but also should make iTunes see the iPod.
If that doesn't work you may need to take the iPod back and have it tested by the genius bar techs to make sure the connector is not bad.

Lightroom Opens when plugging anything to USB Port

If I plug any printer or jump drive to one of my PC USB ports, Lightroom launches. How do I disable?

Read the FAQ.

Need help one USB Port on MacBook Pro not working

Its been a weak now and im getting tired of my MacBook pro USB not reading anything.. It wont read/connect usb drives, IPods/IPhones/IPads, and Android phones. I have tried the PRAM and SMC resets and nothing has worked i even left my Macbook pro off for a whole day. ITS ONLY ONE PORT NOT WORKING, i took it to bestbuy because its closest to me but geek squad just did what i explained above and told me get a USB hub and NO! i want to fix this issue... Anyone has had this happen can you let me know if its because the USB port is no longer working or a software issue... Also i keep getting this notification telling me USB devices disabled draining to much power but i have nothing connected!!
ps- my MacBook Pro is getting very hot fast and it happens when im not even using it, i get home and it very hot could there be another hardware failure i dont leave applications open when i sleep it.

It sounds like you might have a hardware problem. Your best bet is to go to the Genius Bar. The evaluation is free, and they'll fix it if you're under Applecare. Back up your stuff first though.

USB Ports on HP G60-230US Notebook Not Detecting USB Devices

I've had an HP G60-230US Notebook PC for about three and a half years now, and all of a sudden tonight my USB ports decided to all stop working. I first noticed it when I tried to hook up my iPod to sync it and it didn't show up in iTunes. I unplugged my wireless mouse to see if the other USB port would work with no luck, and when I plugged my wireless mouse back in it wasn't detected either. I tried restarting my computer twice to see if that would take care of the problem but it didn't.
My notebook currently runs Windows Vista. On a normal day I'll have my external harddrive (WD My Passport Essential 500 GB), my wireless mouse (Microsoft Wireless Mobile 3500) and my Targus Chillmat with 4 USB hubs in the back plugged into my 3 USB ports. My printer is usually plugged into one of the Chillmat's USB ports. When I want to sync my iPod I usually unplug the Chillmat because none of the USB hubs on it will detect the iPod. At the moment my wireless mouse will still work if I leave it plugged into its USB port when I restart my computer, and all the chillmat is doing is cooling my laptop down.
Any help would be very much appreciated.

You may have exceeded the available power capacity of the USB ports in your notebook PC too many times. That can result in non functioning (forever) ports. That is the specific reason that I recommend only using externally powered USB hubs.
You can check the current carrying capacity of the USB ports and see how much they are using via the device manager.
Open Device Manager and then right-click a USB root hub. Select properties and then the Power tab.
This particular system has many ports available.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Can I put abort execution button and Run button in GUI ?

Dear All ,
Can I put "abort execution button" and "Run button" in GUI with bigger buttons ?
Thanks.....

Hi wMw.
Aborting normally works fine for very small applications or architectures but not for anything after that. Aborting a VI can leave things in states that you don't want to be in or references open. Sometimes you do need to Abort the code though (other programming environments use Abort buttons) so I don't think we can get rid of it entirely.But try to avoid it maximum.
EDIT:why you are trying to do such a strange thing??
Thanks as kudos only

Recovery media program not recognizing flash drive in USB port

I have a new NB505-N500BL netbook. I am trying to create a backup using the Toshiba Recovery Media Center.
However, it doesn't seem to recognize that I have an 8GB flash drive installed.
Everytime I hit "create," I get the message to insert a 7.7GB flash drive. When I hit "OK" I get a msg to insert a flash drive greater than 7.7GB.
The 8GB flash drive is installed. I've tried it in all 3 USB ports. I've tried inserting it before turning ont the computer and afterwards.
I bought the flash drive directly from Toshiba so it should be good. I also assume a new 8GB flash drive meets the requirements of 7.7GB.
Any suggestions?
Thanks!
Emma

Hi Emma,
Contrary to what the size it's asking for, it's possible that the drive is just slightly too small. Even though the data may fit on the drive you have, the way TRMC calculates its free space may be slightly off. If you wish, you can try building this by hand and see if it fits. As follows:
1. First format the USB drive and make it active.
2. Now reboot the machine hitting the <F8> key until you are presented with a menu.
3. The first option should be "Repair...", then hit <ENTER>
4. You will be present with two login screens and eventually arrive at a repair menu.
5. First open up a command box and leave it open.
6. Now go back to the menu and launch the "TOSHIBA Recovery Wizard".
7. It will eventually get to a warning screen. Don't go pass this warning screen.
8. Once it gets to the warning screen, toggle back to the command box.
9. All you need to do is copy the contents from (I believe it's drive Q:\" to you root of your USB drive.
"robocopy Q: (USB Drive letter) /E /R:1 /W:2
10. Once everythings copied (assuming it fits), <Cancel> and the warning screen and then try rebooting from your USB drive.
Rick...

Low power on USB port for external hard drive

Hi all!
I'm new here and I have some question about my brand new hybrid - HP Envy x2.
Couple days ago i found an issue that usb ports are powered by from motherboard even when tablet with dock is turned off or in hibernation mode. This is problematic when I leave device with plugged usb hub, external HD, speakers (powered from usb port) and mouse. After 8 hours in work when I go back home I saw that battery is about 10-15% lower than before leaving Envy x2. I disabled USB charge mode in BIOS, but after that I have problem with working of my external HD.
When I try to attach hard drive to computer and then I try to turn it on nothing happens - looks like system (Windows 8.1) can't boot. But after immediate unplugging HDD from USB system goes to procedure of starting. I also tried to plug Toshiba HD after turning on my Envy x2 and being in desktop, but nothing happens. Light on HD is blinking, I can hear from it sound like clicking (trying to start?). Also HD is visible in Device Manager but not in My Computer (as additional partition).
I have tried to change boot options in BIOS by positioning of devices (priority to boot from CD ROM, HDD, OS etc.) but did not fixed problem.
After couple of tests provided to found why my HD did not work properely in disabled USB charge mode I know that USB port did not give minimum value of power from supply. I found cable with one plug on one side, and with two plugs on other side (like "Y" type). Then i plugged one end into first USB port, then second end in second USB port and finally - last end of cable to m HD and booooom! It works!
Here is my question: Is there any ability to change that kind of power supply on USB ports? I want to power mu external hard drive from one USB port, not from two. I have USB hub but don't want to use two USB ports (on the opposite positions of docking station) and additional USB cable. I have the most recent BIOS (F12) and all fresh drivers installed on my computer.
Any solutions?

I am not going to take credit for this. I had a similar problem, but all of my USB ports stopped working for EVERYTHING! You were right on track, and here is the final bit of information that you needed: Microsoft Surface tablet External USB hard drives auto-sleep in Windows 8.1 Posted on November 4, 2013 After upgraded from Windows 8 to Windows 8.1 Pro, my SeaGate Expansion 2TB hard drive always runs to sleep mode automatically and then disappears if no file transfers occur. when I try to access its stored files, the File Explorer will be unresponsive. Changing the power options is not working. In Windows 8.1 the external USB hard drives and USB flash drives are configured with a low power state by default. That causes USB massstorage devices auto-sleep or file transfers stop unexpectedly. You could change the hardware ID of USB storage device in the registry to resolve the problem. * Updated to the latest firmware for the device to check if it is fine. * From Start screen, open the Search charm, type regedit, right-click the regedit icon from result, and select “Run as administrator“. * In the left pane of Registry Editor, navigate to the key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbstor * Right-click the “usbstor” and create a key with the following key name: apricorn (aegis padlock) 09840315 buffalo external hdd 500gb 04110105 cavalry dual bay dock 152d2352 diskgenie usb device 09840092 hitachi touro 3.0 4tb usb 3.0 49711015 kingston datatraveler hyperx 3.0 usb device 256gb (dthx30/256gb) 0951162b lacie 2tb usb drive 059f1018 mediasonic h82-su3s2 probox 152d0539 multi-drive enclosure connected 15200551 seagate expansion 2tb 0bc23320 seagate expansion desk 3tb 0bc23312 seagate fa goflex desk 2tb 0bc25071 verbatim store ‘n’ save superspeed 3tb 18a50400 western digital elements desktop 2tb 10581021 western digital my book 2to 10581140 * Now right-click the new key, create a DWORD entry named DeviceHackFlags with 400 hexadecimal value. * Make a reconnection for the device. RELATED POSTS How to Disable SkyDrive Integration in Windows 8.1 Install Windows 8.1 from USB flash drive Error Code 0xc1900104 Windows 8 gps receiver for Surface Pro Fix Stylus/Pen not working bug on Surface Pro Windows 8 app not sync with Google Apps calendar Create Windows 8.1 Bootable USB Flash Drive This entry was posted in Windows 8 and tagged issues, USB, Windows 8.1 by Windows 8 rt/pro. Bookmark the permalink.

Abort Execution leaves USB port open

Similar Messages

Maybe you are looking for