Abort system error in program SAPLRSOA & form FUNCSOA_VCUBE_READ_REMOTE_DAT

Hi All,
Could please help on the following issue,,
when i am opening the workbook of bex reports i have following error ,please suggest me on this and how can I run the my workbooks with error.
The error is *Abort system error in program SAPLRSOA and form FUNCSOA_VCUBE_READ_REMOTE_DAT*
Thanks
ram

Try replicating the datasource for the virtual cube on which these reports are based and then activate the transfer rules using this datasource.
I faced this issue when my system was migrated from Oracle to DB2. Doing the above fixed this issue.
Please let me know if this helps.

Similar Messages

Abort System Error in program SAPLRRS2 and form INITFL_ASSIGN-01 error

Hi All,
When I refresh a query/workbook getting following error message and can not proceed further..
Abort System Error in program SAPLRRS2 and form INITFL_ASSIGN-01
We are using BW 3.5 and BEX reports.
I'd appreciate if you could help me on this

I don't know if you have since been able to resolve this problem.
Anyway, for future reference, I have just had the same error message and was able to resolve it by simply removing and then reinstalling one of the characteristics, together with its variables and filters, in the free characteristics section of the query.
Hope that this is of help to someone.

"abort system error in program CL RSR and form GET_PROVID-02-(see long text

Hi All,
When i try to excuting bex query in analyser and whaen i have to exucuting cube contents, i got this error message :
"abort system error in program CL RSR and form GET_PROVID-02-(see long text)"
System error in program CL_RSR and form GET_PROVID-02- (see long text)
Message no. BRAIN299
Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
Can anyone help me?
kumar.

Hi , could you please check note 1166294 and check if the issue will be fixed ?
1166294-BRAIN 299 in CL_RSR, form GET_CHANMID-02-
Thanks,
Walter Oliveira.

Abort system error in program SAPLRSS2 and form MULTI_ASSIGN-01-

After executing a query with RSRT, I got an error message: "Abort system error in program SAPLRSS2 and form MULTI_ASSIGN-01-".
The error appeared first after patching the SAP BW with the Enhancement Package 1 to version 7.01.
I found the note 1593976 concerning this problem. But installing the note didn't help.
I set a breakpoint at the "PERFORM MULTI_ASSIGN" - statement in the function module "RRS_GVAR_FROM_VREP_FILL" where the exception is thrown.
I compared the code of the form with the older version of the form.
Current version (7.01):
ASSIGN COMPONENT l_s_fieldname OF STRUCTURE c_sx_gvar TO <l_gvar_table>.
IF sy-subrc NE 0. PERFORM x_message USING rs_c_true 'MULTI_ASSIGN-01-'. ENDIF.
Older version (7.00):
ASSIGN COMPONENT L_FIELDNAME OF STRUCTURE C_SX_GVAR TO <L_GVAR_TABLE>.
check sy-subrc eq 0.
The newer version raises an error message where the older version only left the form. So I simulated the old program behaviour by jumping over the 2 occurences of the "PERFORM MULTI_ASSIGN" - statement, because the form doesn't do any changes anyway, when it is left right after the call. The query then seems to be executed properly.
I don't know whether the raising of a message is correct here and I already did something wrong in the old version, which hasn't been detected since EnhP 1 or if the raising of a message is not appropriate here. May you help me out in this situation ?

Thanks! That really helped me out. I thought, I already regenerated the query report. But it seems it has not been the case.

BEX Error: Abort system error in program CL_RSR_GRID and form FILL_AXIS_SET

Hello together,
when we try to change the display setting of a charactrestic in BEx, for example from "display as key" to "display as key and text" we get the following error message:
"Abort system error in program CL_RSR_GRID and form FILL_AXIS_SETXX_LINE:TXT_N_M"
and BEx looses server connection.
Does anybody know what the problem is and how to solve it?
Thank you very much
Johannes

Hi Johannes,
Thanks for the immediate reply.
I receive the following error when I tried to find the note.
"The requested SAP Note is either in reworking or is released internally only"
Regards,
Sriram

Abort System Error in Program SAPLRRV and for RRSV_CHAVL_TO_VALUE_CONVERT

Hello SDN
While refreshing a query in a Workbook, I have received this error message and getting disconnecting form the BW server.
"Abort System Error in Program SAPLRRV and for RRSV_CHAVL_TO_VALUE_CONVERT"
Does anyone has any idea? It is happening in Production and need to fix it as soon as possible.
Appreciate any help and points will be assigned for useful information.
Thanks
kumar

Hi Dinesh
It is stopping at the BREAK-POINT in Function LRRMSU13(RRMS_X_MESSAGE)
variable_screen=X&template_id=0QUERY_TEMPLATE
In the messages , For generation, it display:
&CAUSE&
The query contains selection elements with "Constant Selection". Such a
query cannot be run in the read mode 'Read Everything at Once'.
&SYSTEM_RESPONSE&
The read mode is automatically converted.
&SYS_ADMIN&
In the Variables, I see
&CAUSE&
Variable <(>&<)>V1& is used in the query in such a way, that an
optional entry is not possible.
For example, you might be using an "Exclude", or the variable might be
connected using OR to additional selections for <(>&<)>V2& in the
global filter, but is still displayed in the columns selections.
It is also not possible to use an optional parameter variable to fill
an interval selection in either the from-field or the to-field.
&SYSTEM_RESPONSE&
&WHAT_TO_DO&
If you are able to accept the mandatory entry, you need not do
anything. Otherwise you must work with several variables in the query.
You can use an optional interval variable to do this.
&SYS_ADMIN&
For Key Figs :
&CAUSE&
Quantities are multiplied with values for the key figure &V2& (&V1&).
This is not sensible.
A basic key figure was probably defined that contain a price. Only
addable amounts should be written on the database. Ratios and prices
are calculated as key figures. Therefore, the system maintains the
correct sequence, meaning summing takes place on every place and then
the quotient is formed.
If a 'price amount' is saved as a basic key figure after all then the
'non-aggregated indicator' can be undone using 'Change key figure'.
Therefore, the system carries out the multiplication (or division)
before the summing. The key figure is then assigned to the group 'Other
columns'.
&WHAT_TO_DO&
Please check the definition of the key figure &V2& (&V1&).
<DS:TRAN.KDNN>Check or change key figure &V1&</>
Can you please let me know how to fix this issue?
Thanks
Kuamr

Error Specify a value for variable-Abort System error in program SAPLRRK0 a

Dear Experts,
Could anyone help me to fix this issue?
I have an Customer exit variable in my query to calulate the first week of the prior year value as per the system calendar. when i execute the query, I am receiving the following error messaged and i am throwing out from the BW server.
The error message is
Error Specify a value for variable ZR00**
Abort System error in program SAPLRRK0 and form APPEND_KHANDLE_1-01-
Many thanks in advance.
Regards.
Krishna.

Hi Kishor,
try runnig the same query in RSRT, with execute and debug option.
Also check in query designer for its correctness.
Hope this helps...
Regards,
umesh

System error in program SAPLRSOA

Hello All,
I tried to execute a query and it resulted in the following error:
System error in program SAPLRSOA and form FUNC RSOA_VCUBE_READ_REMOTE_DATA[6] (see long text).
In BI, the data is readfrom the remote cubes. And there seems to be error in the function used to read the data from these remote cubes.
Further on seeing the long text, I got the follwing message:
Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
Notification Number BRAIN 299
Can someone pls help me on this soon?

Hi,
Pls chk this note;
Note 983605 - Query on RemoteProvider: No data or termination
Symptom
A query on a VirtualProvider (SAP RemoteCube) or on a MultiProvider that contains a Virtual Provider terminates with an error message from the source system. Possible errors are:
Unexpected error: reduce_field_list
Or: The query does not return any data.
Or: If you carry out the query on a MutiProvider with virtual PartProvider, it may return incorrect data, because the part from the RemoteCube is missing.
Other terms
RSOA_VCUBE_READ_REMOTE_DATA, PERFORM transform_to_ts, Remote InfoCube, InfoProvider, Cube, data target, destination
Reason and Prerequisites
This problem is caused by a program error.
The VirtualProvider (SAP RemoteCube) is connected with a DataSource via a (3.X) InfoSource.
The navigation step of the query leads to a limitation (selection) on a characteristic that is filled with a constant in the transfer rule (between 3.X InfoSource and DataSource).
Technical: Initial entry in field list.
Solution
BW 3.0B
           Import Support Package 33 for 3.0B (BW 3.0B Patch 33 or SAPKW30B33) into your BW system. The Support Package is available once Note 914950 "SAPBWNews BW 3.0B Support Package 33", which describes this Support Package in more detail, has been released for customers.
BW 3.10 Content
           Import Support Package 27 for 3.10 (BW 3.10 Patch 27 or SAPKW31027) into your BW system. The Support Package is available once Note 935963 "SAPBWNews BW 3.1 Content Support Package 27", which describes this Support Package in more detail, has been released for customers.
BW 3.50
           Import Support Package 19 for 3.5 (BW 3.50 Patch 19 or SAPKW35019) into your BW system. The Support Package is available once Note 928662 "SAPBWNews BW Support Package 19 NetWeaver'04 Stack 19", which describes this Support Package in more detail, has been released for customers.
BW 7.0
           Import Support Package 10 for 7.0 (BW 7.0 Patch 10 or SAPKW70010) into your BW system. The Support Package is available once Note 914304 "SAPBWNews BW 7.0 Support Package 10", which describes this Support Package in more detail, has been released for customers.
In urgent cases, you can implement the correction instructions.
You must first implement Notes 932065, 935140, 948389, 964580 and 969846, which provide information about transaction SNOTE. Otherwise, problems and syntax errors may occur when you deimplement some notes.
To provide information in advance, the notes mentioned above may already be available before the Support Package is released. In this case, the short text of the note still contains the words "Preliminary version"
Hope this helps
Regards
CSM Reddy

Abort system error in program SAPLRRK0

Hi All,
I have gone thru many forums and I also read a post of similar problem but I think mine is diff from all of them.
When one of user is running the Query he is seeing a error message saying:
ABORT system error in program SAPLRRK0 and form RSRDR;SRRK0F30-01-.
Once he close the session and open back he is ok. I tried to refresh on my PC and I am ok and I didn't see any messages. I really don't have any idea why this is happening.
I read OSS note-734184 but it's not detailed.I don;t think we can apply support pack now because they are crunning their month end reports and there is no time to do that now.
Your responses are really appreciated!
Thanks
AP

Praveen,
Thanks for the quick info.
I went to SM21 and I saw this message on that user R49 Communication error, CPIC return code 020, SAP return code 223
But I don't know is this message related to that and because I am seeing same message for another user and she don't have any issues at all with the same query.
That surprises me!
Any clues?????

Abort system error in program CL_RSDM_READ_MASTER_DATA and form_sidval_dire

HI All,
The following error is thrown when I execute the query.
abort system error in program CL_RSDM_READ_MASTER_DATA and form_sidval_direct_
However, earlier today, I ran this query successfully several times.This Query is on a multiprovider.
Appreciate your help in advance.
Regards,
Harika

Dear Harika,
Try to repair at RSRV and check.
Check: Re: SID error for characteristic
Srini

System error in program SAPLRRSV & Form RRSV_CHAVL_TO_VALUE_CONVERT

Hi,
While running a Bw Report I'm getting the following error:
System error in program SAPLRRSV & Form RRSV_CHAVL_TO_VALUE_CONVERT
When checking the report found that one of the Characteristic of the report is in incorrect Internal format. As a result it shows inconsistency when checking the values of the charactersitic for conversion exit.
Tried correctin this error by doing a correct error but it didnt work.
When checked the SID table the characteristics had some invalid records which are not maintained in the Master Data table.
How to correct this error?
-Thanks
Sree

Hi Sree,
We're having the same problem. I'd like to know how to solve it. Could you please tell me how to do it?
Thanks.
Best regards,
Julian.

Abort system error in program SAPLRRK0 and from RSRDR(CHECK_NAV_INIT_BACK)

Hi guys,
any can help how to solve below error.
Abort system error in program SAPLRRK0 and from RSRDR(CHECK_NAV_INIT_BACK)
regards
raja

Hello ,
Check the following note 578948 and see if you could get some help.
hope it helps
assign points if useful

Abort System error in program CL_RSDM_READ_MASTER_DATA

Hi Gurus,
I had a user who was trying to run a query and they got this error msg:
"Abort System error in program CL_RSDM_READ_MASTER_DATA and form_sidval_direct"
I went to RSRV and tried to repair Master Data objects, I came up with this error only on this one "Characteristic 0WBS_ELEMT : Missing initial entry in table /BI0/XWBS_ELEMT". Please guide as to what I should do for this message.
Thnx.

Thanks Mangra,
I did not understand your statment " Check your master data whether the first blank entry is existing or not(?) if not create it (create what ?), transport the object"
Please explain little bit more with step by step.
Thanks

Abort system error when opening the BEx query

When runing the Bex query I get this error
' SQL Error 1578 - Abort system error in program SAPLRRKO and form RSRDR;SRRK0F30_01_'
Diagnosis: Internal error is a targetted termination since the program has an incorrect status.
Please advice me how to correct this issue.
Thanks in advance.
Taj

Hey,
Thanks for your answer , I assigned a points to you. still I need more info on this then what to do further.If this was caused due to program error then what I have to do.
Version: 3.50, Package :SAPak35012 .
Please let me know is this something basis needs to take care of this? .
Looking forward to hear from you.
Taj
Message was edited by: Tamkris Taj
Message was edited by: Tamkris Taj

Abort system error

Dear All
I got a query. It outputs some results when i run it. But if i drilldown according to an object that is including hierarcy, it gives the following error message.
"Abort system error in program SAPLRRK0 and from SORTING_PRUEFEN_01-08"
Any ideas?
Thanks
Sancho

See the note [1047781|https://websmp130.sap-ag.de/sap(bD1pdCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1047781&nlang=DE&smpsrv=https%3a%2f%2fwebsmp102%2esap-ag%2ede], that explain this error.
Mario

Abort system error in program SAPLRSOA & form FUNCSOA_VCUBE_READ_REMOTE_DAT

Similar Messages

Maybe you are looking for