Abort system error
Dear All
I got a query. It outputs some results when i run it. But if i drilldown according to an object that is including hierarcy, it gives the following error message.
"Abort system error in program SAPLRRK0 and from SORTING_PRUEFEN_01-08"
Any ideas?
Thanks
Sancho
See the note [1047781|https://websmp130.sap-ag.de/sap(bD1pdCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1047781&nlang=DE&smpsrv=https%3a%2f%2fwebsmp102%2esap-ag%2ede], that explain this error.
Mario
Similar Messages
-
HI All,
The following error is thrown when I execute the query.
abort system error in program CL_RSDM_READ_MASTER_DATA and form_sidval_direct_
However, earlier today, I ran this query successfully several times.This Query is on a multiprovider.
Appreciate your help in advance.
Regards,
HarikaDear Harika,
Try to repair at RSRV and check.
Check: Re: SID error for characteristic
Srini -
Hello SDN
While refreshing a query in a Workbook, I have received this error message and getting disconnecting form the BW server.
"Abort System Error in Program SAPLRRV and for RRSV_CHAVL_TO_VALUE_CONVERT"
Does anyone has any idea? It is happening in Production and need to fix it as soon as possible.
Appreciate any help and points will be assigned for useful information.
Thanks
kumarHi Dinesh
It is stopping at the BREAK-POINT in Function LRRMSU13(RRMS_X_MESSAGE)
variable_screen=X&template_id=0QUERY_TEMPLATE
In the messages , For generation, it display:
&CAUSE&
The query contains selection elements with "Constant Selection". Such a
query cannot be run in the read mode 'Read Everything at Once'.
&SYSTEM_RESPONSE&
The read mode is automatically converted.
&SYS_ADMIN&
In the Variables, I see
&CAUSE&
Variable <(>&<)>V1& is used in the query in such a way, that an
optional entry is not possible.
For example, you might be using an "Exclude", or the variable might be
connected using OR to additional selections for <(>&<)>V2& in the
global filter, but is still displayed in the columns selections.
It is also not possible to use an optional parameter variable to fill
an interval selection in either the from-field or the to-field.
&SYSTEM_RESPONSE&
&WHAT_TO_DO&
If you are able to accept the mandatory entry, you need not do
anything. Otherwise you must work with several variables in the query.
You can use an optional interval variable to do this.
&SYS_ADMIN&
For Key Figs :
&CAUSE&
Quantities are multiplied with values for the key figure &V2& (&V1&).
This is not sensible.
A basic key figure was probably defined that contain a price. Only
addable amounts should be written on the database. Ratios and prices
are calculated as key figures. Therefore, the system maintains the
correct sequence, meaning summing takes place on every place and then
the quotient is formed.
If a 'price amount' is saved as a basic key figure after all then the
'non-aggregated indicator' can be undone using 'Change key figure'.
Therefore, the system carries out the multiplication (or division)
before the summing. The key figure is then assigned to the group 'Other
columns'.
&WHAT_TO_DO&
Please check the definition of the key figure &V2& (&V1&).
<DS:TRAN.KDNN>Check or change key figure &V1&</>
Can you please let me know how to fix this issue?
Thanks
Kuamr -
Error Specify a value for variable-Abort System error in program SAPLRRK0 a
Dear Experts,
Could anyone help me to fix this issue?
I have an Customer exit variable in my query to calulate the first week of the prior year value as per the system calendar. when i execute the query, I am receiving the following error messaged and i am throwing out from the BW server.
The error message is
Error Specify a value for variable ZR00**
Abort System error in program SAPLRRK0 and form APPEND_KHANDLE_1-01-
Many thanks in advance.
Regards.
Krishna.Hi Kishor,
try runnig the same query in RSRT, with execute and debug option.
Also check in query designer for its correctness.
Hope this helps...
Regards,
umesh -
Abort System Error in program SAPLRRS2 and form INITFL_ASSIGN-01 error
Hi All,
When I refresh a query/workbook getting following error message and can not proceed further..
Abort System Error in program SAPLRRS2 and form INITFL_ASSIGN-01
We are using BW 3.5 and BEX reports.
I'd appreciate if you could help me on thisI don't know if you have since been able to resolve this problem.
Anyway, for future reference, I have just had the same error message and was able to resolve it by simply removing and then reinstalling one of the characteristics, together with its variables and filters, in the free characteristics section of the query.
Hope that this is of help to someone. -
"abort system error in program CL RSR and form GET_PROVID-02-(see long text
Hi All,
When i try to excuting bex query in analyser and whaen i have to exucuting cube contents, i got this error message :
"abort system error in program CL RSR and form GET_PROVID-02-(see long text)"
System error in program CL_RSR and form GET_PROVID-02- (see long text)
Message no. BRAIN299
Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
Can anyone help me?
kumar.Hi , could you please check note 1166294 and check if the issue will be fixed ?
1166294-BRAIN 299 in CL_RSR, form GET_CHANMID-02-
Thanks,
Walter Oliveira. -
Abort system error when opening the BEx query
When runing the Bex query I get this error
' SQL Error 1578 - Abort system error in program SAPLRRKO and form RSRDR;SRRK0F30_01_'
Diagnosis: Internal error is a targetted termination since the program has an incorrect status.
Please advice me how to correct this issue.
Thanks in advance.
TajHey,
Thanks for your answer , I assigned a points to you. still I need more info on this then what to do further.If this was caused due to program error then what I have to do.
Version: 3.50, Package :SAPak35012 .
Please let me know is this something basis needs to take care of this? .
Looking forward to hear from you.
Taj
Message was edited by: Tamkris Taj
Message was edited by: Tamkris Taj -
Hi All,
Could please help on the following issue,,
when i am opening the workbook of bex reports i have following error ,please suggest me on this and how can I run the my workbooks with error.
The error is *Abort system error in program SAPLRSOA and form FUNCSOA_VCUBE_READ_REMOTE_DAT*
Thanks
ramTry replicating the datasource for the virtual cube on which these reports are based and then activate the transfer rules using this datasource.
I faced this issue when my system was migrated from Oracle to DB2. Doing the above fixed this issue.
Please let me know if this helps. -
Abort system error in program SAPLRRK0
Hi All,
I have gone thru many forums and I also read a post of similar problem but I think mine is diff from all of them.
When one of user is running the Query he is seeing a error message saying:
ABORT system error in program SAPLRRK0 and form RSRDR;SRRK0F30-01-.
Once he close the session and open back he is ok. I tried to refresh on my PC and I am ok and I didn't see any messages. I really don't have any idea why this is happening.
I read OSS note-734184 but it's not detailed.I don;t think we can apply support pack now because they are crunning their month end reports and there is no time to do that now.
Your responses are really appreciated!
Thanks
APPraveen,
Thanks for the quick info.
I went to SM21 and I saw this message on that user R49 Communication error, CPIC return code 020, SAP return code 223
But I don't know is this message related to that and because I am seeing same message for another user and she don't have any issues at all with the same query.
That surprises me!
Any clues????? -
Abort system error in program SAPLRSS2 and form MULTI_ASSIGN-01-
After executing a query with RSRT, I got an error message: "Abort system error in program SAPLRSS2 and form MULTI_ASSIGN-01-".
The error appeared first after patching the SAP BW with the Enhancement Package 1 to version 7.01.
I found the note 1593976 concerning this problem. But installing the note didn't help.
I set a breakpoint at the "PERFORM MULTI_ASSIGN" - statement in the function module "RRS_GVAR_FROM_VREP_FILL" where the exception is thrown.
I compared the code of the form with the older version of the form.
Current version (7.01):
ASSIGN COMPONENT l_s_fieldname OF STRUCTURE c_sx_gvar TO <l_gvar_table>.
IF sy-subrc NE 0. PERFORM x_message USING rs_c_true 'MULTI_ASSIGN-01-'. ENDIF.
Older version (7.00):
ASSIGN COMPONENT L_FIELDNAME OF STRUCTURE C_SX_GVAR TO <L_GVAR_TABLE>.
check sy-subrc eq 0.
The newer version raises an error message where the older version only left the form. So I simulated the old program behaviour by jumping over the 2 occurences of the "PERFORM MULTI_ASSIGN" - statement, because the form doesn't do any changes anyway, when it is left right after the call. The query then seems to be executed properly.
I don't know whether the raising of a message is correct here and I already did something wrong in the old version, which hasn't been detected since EnhP 1 or if the raising of a message is not appropriate here. May you help me out in this situation ?Thanks! That really helped me out. I thought, I already regenerated the query report. But it seems it has not been the case.
-
Hi guys,
any can help how to solve below error.
Abort system error in program SAPLRRK0 and from RSRDR(CHECK_NAV_INIT_BACK)
regards
rajaHello ,
Check the following note 578948 and see if you could get some help.
hope it helps
assign points if useful -
Hello together,
when we try to change the display setting of a charactrestic in BEx, for example from "display as key" to "display as key and text" we get the following error message:
"Abort system error in program CL_RSR_GRID and form FILL_AXIS_SETXX_LINE:TXT_N_M"
and BEx looses server connection.
Does anybody know what the problem is and how to solve it?
Thank you very much
JohannesHi Johannes,
Thanks for the immediate reply.
I receive the following error when I tried to find the note.
"The requested SAP Note is either in reworking or is released internally only"
Regards,
Sriram -
Abort System error in program CL_RSDM_READ_MASTER_DATA
Hi Gurus,
I had a user who was trying to run a query and they got this error msg:
"Abort System error in program CL_RSDM_READ_MASTER_DATA and form_sidval_direct"
I went to RSRV and tried to repair Master Data objects, I came up with this error only on this one "Characteristic 0WBS_ELEMT : Missing initial entry in table /BI0/XWBS_ELEMT". Please guide as to what I should do for this message.
Thnx.Thanks Mangra,
I did not understand your statment " Check your master data whether the first blank entry is existing or not(?) if not create it (create what ?), transport the object"
Please explain little bit more with step by step.
Thanks -
System error in opening a query
hi guys,
this is the error i'm getting when opening this query which i need for my CR
Abort System error in program in SAPLRR12 and form cell_fuellen_acell-01
Diagnosis:
This internal error is a targeted termination since the program has an
incorrect status.
what is needed to be done here
Your help will be rightly appreciated
ThanksHi Vj,
Please check the SAP notes as below, which seems to be relevant for your issue.
Assign points it useful.....
Symptom
There are errors in Business Explorer components such as Analyzer, Browser, Form Reporting, Web Application Designer, Query Designer, Map, OLE DB for OLAP Provider
Solution General information
This note contains information about BW 3.0A front end patch 3. Here, you will find the most important information on:
Installation
Error corrections
New features
Additional general information that is not specifically for this BW front end patch.
Procedure
Downloading BW front end patches via FTP from sapserv
Downloading a BW front end patch via Online Correction Support (SAPnet)
Preparing the Installation Server
Checking the Installation Server
Installation on PC
Checking the PC
Problems during the installation of the BW front end Patch
Distributing a patch per script (for administrators only)
Installation
During the installation of the BW front end patch, note the following:
(This area is constantly updated)
The BW 3.0A front end patch 3 is based on the SAP GUI 6.10 Presentation CD 1 (6.10 Final Compilation 3, material number 50051811) and the SAP GUI 6.10 patch 12 or higher.
The BW 3.0A front end patch 3 contains all files, to convert a BW 2.0B/2.1C front end into a BW 3.0A front end.
The BW 3.0A front end is downward-compatible to BW 2.0B/2.C.Thus, it can also be used on BW 2.0B/2.1C backend systems.
When you use the Web Application Designer, implement at least BW 3.0A Support Package 03 (see note 425995).
Error corrections
This BW front end patch corrects the following errors in particular:
in SAP Business Explorer Analyzer
Displaying document links on filter cells and text elements
Improved performance for low-speed connections (WAN)
Bug:Incorrect language when starting documents in the Web browser (refer to note 450200)
Bug:Import of missing styles does not import the color palette anymore (refer to note 450194)
Bug:Various problems during the server logon as of Release 2.0 (incorrect list of Goto destinations, incorrectly indented hierarchy symbols...)
Bug: Starting jump destinations in the Web does not work
in BEx Query Designer
The system does not correctly interpret characteristics that were selected as being unique in each cell and when it checks these characteristics, it mistakenly reports them as being defined non-uniquely.
After you called the cell editor, you had to press the toolbar buttons twice to call the required function.
In the cell editor, you could change the formula cells but not the formulas of the columns or of the rows because the system displayed all references to other columns or rows as 25 digit numbers.
When you use Save as ... for queries with formula cells, these cells are not copied.
When you used the Save as ... function for queries with cells, the copied query sometimes displayed the message "Brain 299 SAPLRRI2 Form CELL_FUELLEN_ACELL-01-" when it was executed.
When you used the Save as ... function for queries with formula cells, these cells were not copied.
in Variable Editor
Formula variables that were replaced with the "To" value in intervals, were displayed without the "To" selection when you changed them.
in SAP Business Explorer Browser
Drag&Drop of Japanese file names on Japanese WinNT computers is now supported
Temporary files are automatically deleted when the BEx Browser is exited
New features
New features delivered with this BW front end patch:
SAP Business Explorer Analyzer
Delete function in dialog "Open -> Views"
Displaying documents for text elements and filter values
Now the BW front end is installed in a separate program folder in the start menu. The folder is called 'Business Explorer'.The setup only allows you to change the name of the folder of the SAP front end.
Procedure
1. Downloading the BW front end patch via FTP or SAPnet
2. Preparing and checking the installation server
3. Installing and checking on the PC
Note that you cannot install a BW front end patch directly on a PC (also see the 'Distribution of a patch by script' section).
The check of every step with SAPBEXC.XLA avoids unnecessary subsequent problems.
Downloading BW front end patches via FTP from sapserv
Downloading patches from the sapserv is described in note 96885, "Downloading a front end patch from SAPSERVx".
The BW 3.0A front end patches and the SAP GUI 6.10 patches are in the directory
sapservX/general/frontend/patches/rel610/Windows/Win32
The file name of the BW front end patch is
BW30A_n.EXE (where 'n' is the number of the BW front end patch)
The file name of the SAP GUI patch is
GUI610_n.EXE (where 'n' is the number of the SAP GUI patch)
In general, you can use the highest existing SAP GUI patch.The above-mentioned number of the SAP GUI patch is the minimum requirement.
Downloading a BW front end patch via Online Correction Support (SAPnet)
You can also download BW front end patches in the SAPnet.The URL for the SAP Online Correction Support is:
http://service.sap.com/swcenter-main
After you select SAP BW/SAP BW 3.0A/Binary Patches/SAP GUI for Windows 6.10/Win32 in the tree on the right side, the SAP Download Area appears on the left side.
Here you can select BW30A.EXE and, if necessary, GUI610.EXE for downloading.
In general, you can use the highest existing SAP GUI patch.The above-mentioned number of the SAP GUI patch is the minimum requirement.
Preparing the Installation Server
The installation of patches on the installation server is described in note 361222. Follow the instructions in this note.
A BW front end patch contains all files from the previous patches, so that you only need to install the latest patch.
Checking the Installation Server
Note 197460, "BW front end Checktool sapbexc.xla", describes how easily and quickly you can check the installation server.
Installation on PC
The BW front end patch is installed by executing the SAP GUI setup.In the setup, you must select the BW add-ons component to install the BW front end.
See also the section distribution of a patch per script.
Checking the PC
Note 197460, "BW front end Checktool sapbexc.xla", describes how simple and fast the local installation checks a PC
The local execution of SAPBEXC.XLA is necessary if you sent problems to the SAP Support (see note 142705).The status of a PC can be checked with the result of SAPBEXC.XLA.
Problems during the installation of the BW front end patch
If problems occur during the installation of the BW front end patches, you should install the BW front end patch again and use the following method for this:
First, remove the BW front end with "Remove" menu option under "SAP front end" from your local PC.
Afterwards you can install the front end programs again with the setup program of your setup server.The setup program has been delivered with the front end CD.You must have administrator rights on the local PC.During the setup, no other programs (for example, Excel) should run.
Certain programs save information on OLE components in special files.These files are not updated automatically during a new installation, therefore, when you change the OLE component during the installation, old information may remain in the system.We recommend you delete all files with the extensions ".EXD" and ".OCA" before you carry out the new installation.
Distributing a patch per script (for administrators only)
There is a large number of products for the distribution of software (for example, Microsoft SMS, IBM Tivoli, NetSupport NetInstall), so that no individual Support is possible when you use SAP and BW.There are two general notes about the front end installation (153341 and 194859), to which the system also refers.
The following remarks are intended for administrators who want to distribute a BW front end patch with such a software.
A BW front end patch consists of several files in different directories. These directories correspond to the directories on the installation server or on the CD.The files are usually distributed into the following directories on the local PC:
c:\program files\common files\sap\system
c:\program files\sappc
c:\winnt\system32 or c:\windows\system
In the sapbexc.xla file on the "Version" tab, there are notes about where the file must be copied to and whether it must be registered.
For the preparation of a script, first you should make a normal installation on a local PC from the installation server which must be checked with sapbexc.xla (see note 197460).Afterwards you can localize the corresponding directory of a file using this PC.In general, each DLL and each OCX must be registered if it can be registered.After the installation per script, a deinstallation may no longer work, therefore, before registering a file with regsvr32.exe <Path\File>, you should execute the script for an unregistration with regsvr32.exe /U <path\file>.
Currently, the sapbexc.xla checktool may not be able to recognize certain installation errors (copy without registrations) (see note 206609).
SAP offers support for problems with incorrect scripts for distributing patches.
Best Regards,
DMK
Assign Points if it helps.... -
System error when I refresh a query/WB
Hi All,
When I refresh a query/workbook getting following error message and can not proceed further..
<b>Abort System Error in program SAPLRRS2 and form INITFL_ASSIGN-01</b>
We are using BW 3.5 and BEX reports.
I'd appreciate if you could help me on this
Thanks
BI ConsultantWhat variables are you using in your query? This error essentially occurs when the variable values are not correctly transferred resulting in a high volume data selection. Do you have any mandatory variables in the query? Are they getting filled the first tiem round?
Maybe you are looking for
-
File Sender Adapter: Content Conversion :Mandatory parameter 'xml.keyfieldN
i have a scenario where i had to pick a flat file and post it to RFC. on the basis of keyfields i had to pick the values <b>but i am getting mandatort field xml.keyfieldnamec: no value</b> my flat file is of type : E2EDL20 02000
-
Project Conventions for J2EE Apps Early Access...
Hi I am trying to set up a standardized directory structure for J2EE apps that is flexible enough from a simple webapp to a complex J2EE App with multiple EJB components, WARs...etc..etc... For this, I turned to Java Blueprints Guidelines, Project Co
-
Does CRM supports firefox and other browsers apart from IE
Hi, can you pls share if CRM supports firefox and other browsers apart from IE. are their any specific settings to enable other browsers? any documentation would be helpful. thanks RH
-
REP-52262: Diagnostic output is disabled.
i have installed oracle 11g R2 on windows 2003 server weblogic + forms and reports when i tried to chet reports server it give the following error REP-52262: Diagnostic output is disabled. i found a solution on the OTN to change in rwservlet.properti
-
Update Adobe Inspiration browser in Windows 7
Get error message instructing me to contact author (Adobe?) because installation program is misconfigured.