Abour Solution Manager RFC connection

Hi, All
About soulation manager 4.0, I got configuration guide to setup "Real time system Monitoring"
as per user guide -> create RFC connection and setup system monitoring, it make me little bit confousing
currently Solution manager setup for earlyWatch report and works fine.
WHAT I WANT ?
To seutp/configuration "REAL TIME SYSTEM MONITORING" for XI 3.0 and CCMS monitoring in Solution manager
T-code: SMSY shows this screen:-
There are 5 different types of Tab after apply SMSY
1. Landscape Components
2. Database
3. System Group and Logical Components
4. Product Definitions
5. Overview
I am not sure where I create RFC connection and what value will i put in it?
1. Landscape components shows under: all others server name list
   SERVER
     shows server host name: (r5wxw0) and right side windows shows
     data source RFC
     and Technical Data Tab shows all others value (that system I like to monitor)
2. DataBASE (all others application server name)
     IDV
       Header Data Tab
       Data Source: TMS/RFC
3. System Group and Logical Components (under)
   Project Landscapes
   Solution Landscape - operation
   Logical components
4. Product Definitions (under)
   lot of product list
5. Overview
     Server
     Database
     Systems
Now where sould I go to configure CCMS monitoring ?
Thanks in Advanced
Travis

Hi user issue2008 issue
actually i can't connect to solman, but i think it was under 3.
When you select a component, i.e. Dev R/3 or so you should have several clients.
There you can define RFCs and also there you can define Solution Monitoring.
But I think there should be already RFC-Destinations, when you had configured the EWA.
Then you should check the client with the RFC-Destination and Checking Destination.
In Edit-mode you can check the box for Solution Monitoring and save and ok.
After that it should be activated.
Hope it helps you.
Regards,
René

Similar Messages

Solution manager Remote Connection issues

Hi
I'm currently in the process of setting up Solution Manager 7.1 on windows Server 2008r2 using central system.
I did the prerequisite check & the Solman installation and i'm actuallly working on the post-installation steps.
I'm experiencing difficulty with the step : "Configure Remote Connection to SAP".
I followed the informations provided on :   http://service.sap.com/remoteconnection
In the technical prerequesite you have to set up a connection to sap support.
So i have to choose a connection type : I selected Internet connection so my first question is : do we need "VPN with SNC" or "VPN OR SNC" ?
I personnaly understood VPN or SNC.
So from here i decided to use SNC.
The first step was to set up & configure the SAProuter. I decided to do it on an another computer on the same domain ( not on the same computer where Solution Manager is installed ) but i'm not sure it is necesary
I assume I can install Saprouter on the same location as the Solution manager? do you recommend it ?
The Basic Functions testing with niping is working.
The next step is : "establish Internet Connections"
So now i can choose between SNC or VPN : my goal is to establish the connection as fast as possible.
I actually don't have a switch available ( i can get one if necesary but time is running ... ) so i'm opting for the SNC solution.
I tryed to get the certificate for the saprouter but i don't have a register SAProuter, but when i opened a customer messager for component XX-SER-NET, SAP answered about the impossibility to access SAP service Backbone with an SNC , saying that i will need to register a VPN site to site connection to SAP => i don't get it .... Can someone explain it to me ?
So please can one of you guru's tell me how to set this remote connection :
-which materials ( server / switch / firewalls ) ?
-where to get the right documentation ?
-What about DMZ ?
-I have a single IP Address is that enough ? ( setting up nat for port 3299 )
- do i have to contact a service provider ?
My idea was initially to set up the SAProuter on the same computer as the SOLMAN setup & use SNC communication to communicate with SAP but it doesn't seems that easy. Do i need separate installation for Saprouter <=> Solution Manager. ?
What's the minimal infrastructure to establish this connection ?
In addition to that, after configuring the SAProuter, i had trouble with the SAPMMC : on my system , on the instance 0 , the process disp+work.EXE won't run ( yellow light )and i can't find where i made a mistake if you have suggestions ...
Really need your help, i'm on a short deadline ... Any help, even incomplete, would be appreciated.
Thanks a lot.

Thx for the answer.
I actually managed to register my saprouter with SAP and was granted with CN/OU & connection informations.
I followed this guide : http://service.sap.com/saprouter-sncdoc with the addition of this guide : http://wiki.sdn.sap.com/wiki/display/Basis/SAProuterviaSNC.
My first issue : I'm running with a Windows server 2008 r2 enterprise edition 64 bits with a processor Intel Xeon 2.4ghz ( dualcore). so i decided to use the crypto folder "nt-x86_64"
For the environment variable i set as System variables SECUDIR = C:\usr\sap\saprouter and SNC_LIB = C:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll
The generation/install of the certificate is alright ( sapgenpse get_my_name -v -n Issuer is OK )
using the command :saprouter -r -K "p:CN=mycn, OU=myOUnbr, OU=SAProuter, O=SAP, C=DE" i have
I get the following message : trc file     dev_rout
                                                no ligging active
Its strange cause it looks like its running but when i check the services running on windows saprouter isn't started .... How to know if SAProuter is running right ?
If i folow the SAP procedure : Step 3 : test of the ip connection by the customer : SAP Remote Services : technical preparation ( see SAP Note 812386 ) : it's ask in the note to implement note 766505 via SNOTE : i get the following error msg : Error in remote connection to destination SAPOSS : Error when opening an RFC connection ( LB: Hostname or service of the message server unknown#DEST = SA
What's wrong ?
If i use T oss1 in parameter => technical setting => i set my saprouter info in SAProuter 1 ( at customer site ) with instance no. 99 and if SAProuter and SAPNet Message Server at SAP i put the following : Name : sapserv2 / IP Address 194.39.131.34 intance no. 99 and message server name oss001/ DB Name 001/ Instance no.01.
When trying to "Logon to SAPNet" i have an error Unable to connect to SAPNet message server ( default connection will be used ... )
and followed by the error screen : "partner '80.15.173.168:sapdp99' not reached WSAECONNREFUSED : Connection refused. do you want to see the detailed error description ? "
Details : module nixxi.cpp / line 3286 / Method : NipConnect2:80.15.173.168:3299 / Return code : -10 / System call : connect / Error No : 10061 / Error Text WSAECONNREFUSED: Connection refused / Counter : 10
Any idea ?
when doing niping.exe -c -H /H/mylocalSR/H/194.39.131.34/H/194/39.131.34 i obtain :
Wed Dec 07 21:20:09 2011
connect to server o.k
Wed Dec 07 21:20:09 2011
send and receive 10 messages (len 1000)
times -
avg   122.148 ms
max   193.731 ms
min   81.564 ms
tr 15.990 kB/s
excluding max and min :
av2   118.273 ms
tr2   16.514 kB/s
Is it the expected output ?
I've maintained system data in service.sap.com/system-data ( selecting the sap router ) then i tryed to use the SAP service connection, downloaded the .exe but i can't find the stfk.oez. I realized that in my maintain connection screen i have no space for entering any routestring. Seems wrong ?
Do i have to use the SAO?
i've made nat redirection from my router as this : from my public ip to my lan ip ( 192.168.x.x) what should i enter in the routestring : /H/public or lan or hostname ?/S/3299 ?
Hoping you can help me ! ( the goal of all this is to set up RFC connection for postinst step of Solution manager ).
Edited by: BLANCHARD Guillaume on Dec 7, 2011 10:47 PM

Solution Manager RFC issues

Hi Folks,
We are facing problem with RFC connection from Quality to Solution Manager. It says " No authroization for trusted system" however the RFC connection from Solman to Quality is working fine.
in SMSY -> RFC connection test working fine and able to fetch the qas to solman system. We have give all required authorization including SAP_ALL, SAP_NEW and S_RFC_XX Objects also assigned.
It would be of great help if some one can help us on this.
Regards,
Vinod

Hi
Please check the "Troubleshooting in Trusted/trustng system" part in below link
[http://help.sap.com/saphelp_nw04/helpdata/en/22/042671488911d189490000e829fbbd/content.htm|http://help.sap.com/saphelp_nw04/helpdata/en/22/042671488911d189490000e829fbbd/content.htm]
Hope this help to fix the issue,
Thanks,
Jansi

Connect two Solution Manager systems.

Hello,
We are planning to couple two Solution Manager systems.
We want to get all the alerts ABAP+JAVA(Root Cause) from one Solution Manager to the other.
What are te steps to take?
Connect the SLD's?
Connect the systems thru RFC?
Point all the agents to the 2 Solution Manager systems?
Regards,
Mike Geluk

Hello,
It is possible.
For SLD, two options:
- Each Solution Manager can use its own SLD. Then you must define the other server in the SLD, and vice-versa.
- Each Solution manager can connect to a central SLD where the two are defined.
The rest is just like any other managed system configuration: follow the steps in solman_setup.
Best regards,
Guiilherme

Multiple Solution Manager Connectivity to 1 Satellite system

HI..
I have a requirement. There is already an existing landscape with solution manager ECC, BI etc. The solution manager is configured for EWA, Maintenance optimizer etc. I now have to install a new solution manager and connect it to the same set of satellite systems so that I receive the EWA, configure MOPZ again. Will this create any kind of a problem and technically how can we do it? I have two ideas for this scenario
1. Connect the new solution manager to the same satellite systems and do configuration as normal. Got this idea from the below link but not sure how it will work.
Re: send EWA report to more than one solution manager
2. Is it possible to push data from the existing solution manager to the new solution manager?
Would highly appreciate technical suggestions. Thx in advance for your help.

Hello,
You need the SMD Agent in order to have ABAP data going to the Solution Manager. Some RFCs are established directly from Managed System to the Solution Manager to extract E2E Change Analysis, Exception Analysis. The Workload Analysis and Host Information (SAPOSCOL) is extracted from WIly EM
Having that said, you can imagine that you cannot have only RFCs and you cannot have only data extracted from WIly EM.
I suggest you to take a look at the FWK Administration in the solman_workcenter, choose the Managed System tab, and start looking into the details of each extractor. Some have an RFC destionation, others have SOLMANDIAG. The SOLMANDIAG are coming from the Solution Manager Java stack, which is responsible to poll the Wily EM.
The reason you need two SMD Agents is because the SMD Agent connects to the ABAP stack, retrieves data, and then connects to the Wily Enterprise Manager. The Solution Manager polls data from the Wily EM and persists it in the BW.
The SMD Agent doesn't support connecting to two Wily EMs at the same time.
So it is required to have TWO SMD agents polling data from the ABAP stack, at the same time, one of them reporting to one Wily EM, and the other reporting to the other Wily EM.
Each solution manager has it's own Wily EM, and it will pull the ABAP data from the Wily EM.
It is not possible to make the two Solution Manager's connect to one Wily EM, since the setup framework needs to see a SMD Agent available to run the setup wizard and to create the destinations. So each Solution Manager needs a SMD Agent running in the physical host.
I hope it is clear for you.
Best regards,
Guilherme
Edited by: Guilherme Balbinot on Feb 6, 2012 9:44 PM
Edited by: Guilherme Balbinot on Feb 6, 2012 9:49 PM

RFC connection results in "Timeout during connection setup"

Hello Guys,
The RFC ABAP connection to the Solution Manager encounters connection error: "/ CPIC-CALL: 'ThSAPCMINIT' : cmRc=27 thRc=242#Timeout during connection setup."
The Solution Manager has following details:
SAP Solution Manager (700 15)
ORACLE 10.2.0.2.0
HP-UX
The R/3 QAS Customer 1 system has following details:
SAP R/3 Enterprise (620 54)
ORACLE 9.2.0.8.0
HP-UX
The R/3 QAS Customer 2 system has following details:
SAP R/3 Enterprise (620 59)
ORACLE 9.2.0.8.0
HP-UX
The RFC ABAP connection from <SID Solution Manager> -> <SID R/3 QAS Customer 1> is working correctly.
The RFC ABAP connection from <SID R/3 QAS Customer 2> -> <SID Solution Manager> is working correctly.
The RFC ABAP connection from <SID R/3 QAS Customer 1> -> <SID Solution Manager> encounters connection error:
ERROR                timeout during allocate
LOCATION             SAP-Gateway on host hemisrq.services.retail.tc.services.retail.tc / sapgw01
DETAIL               no connect of TP sapdp02 from host conssmp.servom host <host name Solution Manager> after 22
COMPONENT            SAP-Gateway
COUNTER              1152
MODULE               gwr3cpic.c
LINE                 1820
RETURN CODE          242
SUBRC                    0
RELEASE              640
TIME                 Thu Jun 5 10:55:15 2008
VERSION              2
Here's the dev_rfc0 log file
Trace file opened at 20080605 101956 METDST SAP-REL 640,0,235 RFC-VER 3 985555
======> CPIC-CALL: 'ThSAPCMINIT' : cmRc=27 thRc=242
Timeout during connection setup. Please check partner availability
ABAP Programm: RSRFCPIN (Transaction: SM59)
Called function module: RFC_PING
User: SAPBEHEER (Client: 000)
Destination: <SID Solution Manager>CLNT010 (handle: 2, , {4846C6DC-14A2-0F1F-E100-0000AC1B29D8})
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 2277
CPIC-CALL: 'ThSAPCMINIT' : cmRc=27 thRc=242
Timeout during connection setup. Please check partner availability
HOST =<host name Solution Manager>
SERV =sapdp02
Checked the error code 242 "GW_TIMEOUT" and found:
Connection setup to the remote gateway has been closed because timeout has been exceeded.
The time limit can be set in parameter gw/timeout.
Changed parameter gw/timeout to value 10000, but still encounter same error message.
From OS level <SID R/3 QAS Customer 1> i can ping the <host name Solution Manager>.
fvb1:/home/stampg$>ping <host name Solution Manager>
PING <host name Solution Manager>: 64 byte packets
64 bytes from 172.27.68.239: icmp_seq=0. time=1. ms
64 bytes from 172.27.68.239: icmp_seq=1. time=1. ms
64 bytes from 172.27.68.239: icmp_seq=2. time=1. ms
64 bytes from 172.27.68.239: icmp_seq=3. time=1. ms
64 bytes from 172.27.68.239: icmp_seq=4. time=1. ms
64 bytes from 172.27.68.239: icmp_seq=5. time=1. ms
conssmp.services.retail.tc PING Statistics----
6 packets transmitted, 6 packets received, 0% packet loss
round-trip (ms) min/avg/max = 1/1/1
Any suggestions where to look ?
Regards,
Gidion

Hello Gidion,
can you please verify the hostnames/FQDN's? Because:
LOCATION SAP-Gateway on host hemisrq.services.retail.tc.services.retail.tc / sapgw01
host hemisrq.services.retail.tc.services.retail.tc
It seems to me that somewhere the domain is double used.
Additionally:
Sometime there is sapgw 01, sometime sapdp 02. Can you please check the correct service numbers / system numbers?
Regards
Holger

Solution Manager 7.1

Hello Sap Gurus,
I have a problem with my solution manager 7.1 sps11. ( which was upgraded from 7.0 EHP1)
When I run the configuration for the solman_setup -> System Preparation -> step3 Specify Connectivity Data I get RABAX_STATE error
Link
http://hostname:8040/sap/bc/webdynpro/sap/wd_sise_main_app?sap-client=000&sap-language=EN
Error
500 SAP Internal Server Error
ERROR: Access via 'NULL' object reference not possible. (termination: RABAX_STATE)
Dump
/WD_SISE_CUSTOM_AGS
/1BCWDY/M19KN704GUVUSGWREG7A==CP
I am running this from cl000 with user solman_admin to which I have added sap_all and sap_new profiles, same under ddic user.
I have set parameters:
icm/host_name_full =hostname.domanin.com
SAPLOCALHOSTFULL =hostname.domanin.com
SAPLOCALHOST=hostname
icm/server_port_0=PROT=HTTP,PORT=8040,TIMEOUT=1200,PROCTIMEOUT=1200
I have read notes 1869765,1319829
517484 - Inactive services in the Internet Communication Framework
1680616 - RABAX_STATE Solman 7.1 Basic configuration step 3.1
1831404 - Short Dump OBJECTS_OBJREF_NOT_ASSIGNED occurs in Self-Monitoring
but none is working.
Please advise as I have no more ideas what I should do. What other services to activate ?
Thank you in advance,
Mihaela

Hello,
I have checked and applied all the folowing notes and still the error is present:
Central Note 1933506 - SAP Solution Manager 7.1 SP11 - Basic functions
From which
Cannot be implemented
1784854, 1575989 ca
1334867(Doc. WS: Lock Release)
1288194
Note 1690804 Dual stack: Automatic creation of the technical scenario
Implemented
1830640 - Authorizations for SAP Solution Manager RFC users as of SP09
875986(snote)
1955674 Logical components for Solution Manager 7.1 Support Package 10 – Prerequisites
1990166 Deletion of RFC destinations
1970901 Custom code library collector for objects (BW solution) calls functions and methods only
2023332 Update indicator is missing for activities after an upgrade - Support Package 11
1964058 SOLMAN_SETUP: Problems with status of the RFC destinations
1906937 - Corrections for unified rendering 702/15 V (UR-mimes)
1989075 UPL Extractor date without data (1779464)
I have run from se37 report RS_INACTIVE_OBJECTS_LIST and no inactive objects found
Also when am trying to run Tcode LMDB I get same errror:
500 SAP Internal Server Error
ERROR: An exception has occurred (termination: RABAX_STATE)
And Dump:
Category
ABAP Programming Error
Runtime Errors
UNCAUGHT_EXCEPTION
Except.
CX_LMUF_INVALID_PARAMETER
ABAP Program
CL_LMDB_SERVICE_AUTHORIZATION=CP
Application Component SV-SMG-LDB
What happened?
    The exception 'CX_LMUF_INVALID_PARAMETER' was raised, but it was not caught
     anywhere along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program
     'CL_LMDB_SERVICE_AUTHORIZATION=CP' has to be
    terminated.
Please advise as I find no solution on all forums that I have checked so far.
Thank you,
Mihaela

Solution Manager 7.1 IT Service Management: IRT, MPT new status

Hello everyone,
I am wondering, if in SAP Solution Manager 7.1 IT Service Management I can customize new status into SLA measurement, for example 'Customer action' duration time at Web browser (similiar fuctionality as IRT(The initial response time) and MPT(maximum processing time)).[IRT & MPT|http://pokazywarka.pl/ysrkhe/]
Equally, new SLA status should be calculating duration for the other incident status for example "In process". If anyone has idea, please advice.
Best regards,
SAPFan
Edited by: SAPFan on Feb 6, 2012 10:48 PM

Hi,
Under the System Prepration section I have 2 questions I need additional clarification:
1. Under 6.2 Prepare Outside Discovery -> Establish trusted connection-> /usr/sap/hostctrl/exe/host_profile of solution manager server:
a. I added service/admin_users = daaadm. Am I suppose to include the password? what should the formate be?
What you have entered is fine. Would not need to provide the password as well. Check the External discovery troubleshooting guide sections.
https://websmp207.sap-ag.de/~sapidb/011000358700000486362011E
2. Under 6.3 Connect Diagnostic Agent -> ran the following command on my ECC server:
./smdsetup.sh managingconf hostname:"solutionmanager.FQN" port:"50004" user:"ddaadm" pwd:"password1"
a. Is the user/password referring to SolutionManager admin account?
b. How do I check if it's running correctly?
c. How to get my solution manager to see my Ecc server's diag agent?
The user password should be a Solution Manager Java user like SMD_ADMIN or J2EE_ADMIN
How to check for diagonstic agents, again check the trouble shooting guide referred above.
I checked the following:
Start Visual Administrator and navigate to: Server node -> Services -> Security Provider. Please also make sure that the MBeanAdmin is mapped to the Administrators Security role on both: com.adobe/AdobeDocumentServicesADS-EJB and com.adobe/DocumentServicesLicenseManagerADS-License
I don't see the Adminstrator role to add to the above. Am I suppose to just enter "administrator"?
Yes, just add the role "Administrators"
2. Solution Manager Internal Connection -> Setup DPC/DCC Web Service URL
a. I'm supposed do the following: You have started the Agent Administration:
b. How do I start the Agent Administration?
Make sure you have the role SAP_SMWORK_DIAG assigned to your user ID via SU01. Then call solution_manager tcode and goto the RCA tab. Agent Administration link should be available.
Regards,
Srikishan

Help Needed: HP QTP/UFT integration with Solution Manager

Hi Experts,
We are trying to make HP UFT 12.00 work with Solution Manager 7.1 for enabling automated testing for our client. We have successfully linked HP UFT and Solution Manager and were able to record and execute a test script created in HP UFT with no problem.
Unfortunately, when we tried creating a new test script in HP UFT and tried saving it so that it is stored in Solution Manager, we get the following error. We have reviewed the integration procedures and authorization objects needed and it seems nothing was missed.
Anybody familiar with the said error or any suggestions where to look will be appreciated. Thanks in advance.
Detailed steps for replicating the issue:
Connect to Solution Manager through Tools -> SAP Solution Manager Connection…
2.     Open Unified Functional Testing (UFT) 12.00
3.     Click File -> New -> Test
4.     Type even a dummy script in the Action window
5.     Save Test Script by clicking File -> Save <test name> As…
6.     Fill out dialogue box with Test name and Test version then click Ok. Note: I used Z* name
7.     Error Message appears
Note:
One observation is that, error message only appears when trying to save a Test that is not currently in Solution Manager. If I try saving the dummy test from above as “Z_CREATE_SALES_ORDER_02” (exists in Solution Manager),
I am asked if I want to overwrite existing test in Solution Manager.

Hi,
I have configured the solman in accordance with UFT12.0 but still un-able to make conenction to the solution manager.
Connect to Solution Manager through Tools -> SAP Solution Manager Connection…
Error:
Message
SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
Connect_PM GWHOST=<IP>, GWSERV=sapgw02, SYSNR=02
LOCATION    CPIC (TCP/IP) on local host
ERROR       partner <IP>:3300' not reached
TIME        Tue Jan 19 12:02:17 201
RELEASE     710
COMPONENT   NI (network interface)
VERSION     39
RC          -10
MODULE      nixxi.cpp
LINE        3286
DETAIL      NiPConnect2: 192.12.353.12:3302
SYSTEM CALL connect
ERRNO       10060
ERRNO TEXT WSAETIMEDOUT: Connection timed out
COUNTER     1
Could you please guide?
Regards,
Raichand

Solution Manager 4.0 - RFC Connections

hi there,
While ago I configured all my RFC connections within Solution Manager 4.0, and wanted to make sure what are those for:
1. RFC BACK connection (SM_<SID>CLNT<Client no.>_BACK) is used for the SDCCN to collect the session data. But I realized it is also used for Service Desk when users attempt to create support messages from the satellite system. Is this OK?
2. The other RFC connections (SM_<SID>CLNT<Client no.>_LOGIN, SM_<SID>CLNT<Client no.>_READ, SM_<SID>CLNT<Client no.>_TMW, SM_<SID>CLNT<Client no.>_TRUSTED) I am not sure whether they are used and where.
Can somebody please give me a light in this matter? because I think this is bringing me issues in other solution manager features :-S
Thanks a lot.
regards
Katia.

Hi there again,
Thanks very much. It is more clera; just one last question. Then what RFC destination should I use in my satellite system, the one: SM_<SID>CLNT<Client no.>_BACK or SM_<SID>CLNT<Client no.>_TRUSTED ?
And using one of those, with no log on screen option, would make me add the corresponding user profile (for example for create support messages) to the user inserted in such a RFC connection in the "logon data" tab right?
I am using now SM_<SID>CLNT<Client no.>_BACK withtout log on screen option, and the user which is inserted in this RFC connection has the appropiate profiles, but message are created incomplete (I got this error message: "error in local system, message 0000165 incomplete"). I can see those messages from DNOTIF transaction but not from transaction monitor...
How you do this? Because it used to work using same RFC connection (SM_<SID>CLNT<Client no.>_BACK) but with log on screen, so the user was prompted for logging and messages were created succesfully; but then since this rfc connection is also used by SDCCN the data was not being collected, since the log on was required :-S
That is what I changed to no log on screen, and got confused about these RFC connections thing...
Do you have an idea about this?
And thank you very much in advance again.
regards,
Katia.

RFC Connection Problem between Production Server & Solution Manager

Hi,
I want to make a RFC Connection between Production Server & Solution Manager.
But when go through Tcode- SM59 and click on Remote Logon from Production to connect Solution Manager it showing me a Client/Userid/Password window and when i connect go through Solution Manger to Production Server it connects normally. I already done the same process in both the clients, as i already mentioned Logon details in the Logon/Security tab but why it is showing me Client/Userid/Password pad when i am login through Production to SolMan?
+Tell me where the actual problem is! In my Solution Manager end or in my Production Server end +
I want to access Solution Manager from Production Server on just clicking once on Remote Logon from Tcode- SM59.
Thank you.
Edited by: varun@pcl on Jul 31, 2010 4:40 PM

Hi
Mention which Client u login and valid username and password from both PROD Server and Solman .
https://websmp201.sap-ag.de/support under Solman manager .
https://websmp201.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000633637&
Regards

EWA RFC connection SETUP - From Customer system to VAR solution Manager

Hi,
we are going to setup the EWA for our customers. So how I have to create the RFC from the customer system to our Solution Manager?
Thanks
Andrea

>
Andrea Taccolini wrote:
> we are going to setup the EWA for our customers. So how I have to create the RFC from the customer system to our Solution Manager?
Hi Andrea,
Have you already tried to use SMSY to generate the "Back" Destination from customer system to your SolMan?
Once you have selected the customer system in SMSY, you are able to use the RFC connection wizard.
Alternatively, you can define the RFC destination manually.
For easier tracking and trouble shooting, I would recommend to setup a communication user in your SolMan for each individual connected managed customer system.
Assign the appropiate profiles to the user in your SolMan system and create the RFC destination in the managed customer system.
Best regards,
Ruediger

Error in RFC & to Solution Manager System

Hi,
Error in RFC & to Solution Manager System
can anyone tells me why this error occurs???
With regards
kulwinder

FYI
We have just had same issue thaat in certain scenarios with RFC communication BACK to Solution Manager from Satellite system we got the error. We resolved this by looking at the RFC user used in the BACK connection (i.e. SOLMAN<SID>) on the Solution Manager and changing the user type from communications.
Hope this helps someone else, I spent ages digging around for an answer to such a simple fix
Paul

ERROR while CREATING RFC FOR SOLUTION MANAGER DIAGNOSTICS

Dear all,
Hi,
I am configuring solution manager 7.0.
In SPRO>basic setting >operation>solution manager diagnostics > create RFC for solution manager diagnostics i am getting this error
program WEBADMIN not registerred.
can any one tell me how to register this program in sap gateway.
best regards
azeem

Hi Azeem,
Just before creating the rfc connection do this step.
Set-Up Solution Manager Connection to Solution Manager Diagn
Use
Check the connection to function Solution Manager Diagnostics.
Default Settings
The function Solution Manager Diagnostics is installed on the Java instance of the Solution Manager system by default.
Activities
If the default values are correct, save the settings.
To run the Solution Manager Diagnostics in another system, enter the required data and save.
Also check that your java is active.
Regards
Ashok

RFC problem (CTS with Solution Manager)

Hi everybody,
I'm configuring a transport landscape with Solman.
For demo purpose I created 3 clients in a Sandbox system (SBX), which should function like a 3-system-landscape. I created a transport domain in Solman (SM1) and added SBX into the domain (SM1 and SBX are not in one transport directory). The transport routes are configured from SBX:810 - SBX:820 - SBX:830. After I distributed the configuration, I can also see routes in SBX.
I also used SOLMAN_SETUP to generate the RFC connections to every client (READ and TMW), also to SBX:000 and SM1:000.
Then I created a Solman Project and wanted to configure the IMG-Project in "System Landscape" tab (so that I can use this project for CTS). But as I tried to create the IMG, I got an error:
S:No RFC authorization:000 function module SPROJECT_CREATE_NO_DIA_R.
Message no. No RFC authorization000
Can somebody give me a hint?
Another problem is, I created a customizing request and a workbench request in SBX:810, I can see them in SE09 in SBX, but in SM1 I cannot see them! I also don't understand here...
I'd preciate any help from you!

Hello Charlie
Seeing all the STMS queus in Solution Manager is no problem. The way we have set it up is that the Solution Manager is the TMS domain controller and all systems are included into the TMS domain of the Solution Manager.
That makes the STMS queues of the managed SAP systems visible in transaction STMS.
About two years ago SAP showed plans for a new layer for CTS called CCTS (central CTS) which would only be available on Solution Manager and it's purpose would be even more features and central transport request management. However CCTS has vanished from the radar. It's no longer mentioned and at SAP TechED 2011 it was nowhere to be found.
Using CHARM the idea is also that person X creates a request which then a developer Y can use to insert objects into. Why? Segregation of duties is the answer. Creating a request is always done in the managed SAP system, using RFC you will jump to SE01 or another respective transaction to create the request.
QGM and CHARM add another layer (control) on top of CTS, that's how you should visualize it. If you look up presentations on CCTS you will be able to visualy see that.
You can read up on CHARM on https://service.sap.com/solutionmanager
There are also interesting SAPPress books available
The customizing option is to be found in SE09 I believe but I'll check tomorrow and update this reply because I'm on my iPad now without SAP system available.
The obligation is then you must have an IMG_Project in your managed SAP system that has been CTS enabled. Creating such an img project is easy, transaction spro_admin, fill in title, save, go to tab transport request (or something) and enable the project for CTS.
Kind regards
Tom

Abour Solution Manager RFC connection

Similar Messages

Maybe you are looking for