About 5 days ago my mozilla stopped working. It starts to open but all I get is a white page. I have tried uninstalling and reinstalling and still nothing.
Firefox opens a window but the page stays white. It will not load.
== This happened ==
Every time Firefox opened
== about 5 days ago ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; OfficeLiveConnector.1.4; OfficeLivePatch.1.3; .NET4.0C)
Same problem here - I solved it by un-installing and re-installing.
If you open the error console (Ctrk-Shift-J) it will bring up three error messages - I should have copied them - these might be useful to the development staff.
Similar Messages
-
firefox wont start
== This happened ==
Not sure how often
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1) ; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; AskTB5.6)Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
I am running Windows 7 . It happened without any changes being made. I downloaded the install file several different times and even turned off my Kaspersky A/V when I installed.
Perhaps try downloading and saving a copy of the installer to a different (64-bit) PC. Copy the iTunes64Setup.exe installer to an external hard-drive, or a large-enough thumb drive or burn it to a CD-R. Carry the installer back to your PC, copy the installer to your hard drive. (Don't run the install from the ExHD, thumb or CD-R.) Start the install by doubleclicking the iTunes64Setup.exe file.
Does that go through any better for you? -
At start up I get the error message - The procedure entry point xml TextReaderConstName could not be located in the dynamic link library libxm12.dll. I have uninstalled it and reinstalled but it does not fix the problem. Happened after Itunes update I think.
It's a simple fix and doesn't involve reinstalling anything.
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libxml2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "libxml2.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "libxml2.dll" to the location.
5. Restart the programme, it should not display that message, it should be clear.
Good Luck -
About three days ago my iphone5 stopped connecting to my home wifi. I've tried everything in the trouble shooting guides and everything in all the support comments here.Ive reset network, reset all phone settings, turned wifi on and off, forgotten network. Nothing works. Is there anything else it could be? The wifi is fine as all my other devices connect to it no probs. appreciate any help?
About three days ago my iphone5 stopped connecting to my home wifi. I've tried everything in the trouble shooting guides and everything in all the support comments here.Ive reset network, reset all phone settings, turned wifi on and off, forgotten network. Nothing works. Is there anything else it could be? The wifi is fine as all my other devices connect to it no probs. appreciate any help?
-
Okay so about four days ago my ipad says it has apps to update but whenever i go to the update apps page it will not load and i have tried rebooting signing out but nothing will work, any suggestions?
If you are getting the blank app update screen, many, many people are having this problem over the last couple of days. It is a problem that Apple must fix now.
According to Fly150 in another discussion, this will work.
If you want to update the Apps while waiting for Apple to fix Updates:
1. Go to App Store
2. Select Purchased
3. Select All
4. Scroll down to find the Apps showing update
5. Select update on the Apps
This should update the Apps and get rid of the update count in App Store. Apple needs to fix this. It is a workaround only until then. -
hi
I own an account on iTunes two years ago, almost always used it two days ago, the account stops working do not know why when I open the account Italpin reset your password and resend the email to and I did not receive any Klnh aftermarket tried a lot and Amaisalna something please helpCHANGING APPLE ID/EDIT ACCOUNT INFORMATION/CHANGE ITUNES COUNTRY
Tap Settings / iTunes & App Stores, then tap the Apple ID signed in. Sign out of the current Apple ID account and then sign in with another account or create a new Apple ID http://support.apple.com/kb/HT2731?viewlocale=en_US
To edit account information tap Settings / iTunes & App Stores / Apple ID: / View Apple ID
To change your iTunes Store country, sign in to the account for the iTunes Store region you would like to use, tap Settings/iTunes & App Store/Apple ID/View Apple ID/Country/Region
Read this article for information http://support.apple.com/kb/HT1311 -
Edit In Photoshop from lighroom suddenly stopped working. I have tried uninstalling and reinstalling both and still not working.
What error message are you getting? If none then in Lightroom Preferences> General> check "reset all warning dialogs"
Try again and see what message pops up. -
trying to launch photoshop cs3 on a mac running OS10.6.8 i keep getting the error message: Licensing for this product has stopped working you cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT adminstrator or Adobe customer support for help
I already Uninstalled and reinstalled the product and it still does not work.Hi,
Try to uninstall the software again and you have to manually
Delete the following folders:
[Startup Disk]/Library/Application Support/Adobe/Adobe PCD
[Startup Disk]/Library/Application Support/Adobe/caps
[Startup Disk]/Library/Application Support/Adobe/backup
[Startup Disk]/Library/Preferences/FLEXnet Publisher/
[Startup Disk]/Library/Application Support/FLEXnet Publisher/
Go to Applications-->Utilities-->Disk Utility, Open it and Select the MAC HD and then click on Repair permissions.
After that try to run the cleaner tool as mentioned by kglad.
Restart machine and then try to install again.
*** Make sure , you only delete these folders if there is no other adobe applications installed on the machine. As if you have any other Adobe application of the suite ( not free applications ) then it will be a problem. -
Itunes has Stopped working - I have tried uninstalling and re-installing - I am at wits end
I keep getting the message iTunes has stopped working. I have tried uninstalling and re-installing iTunes many times. I had contacted Apple at one point and they told me that I needed to uninstall items in the following order iTunes, QuickTime, Apple Software Update, Apple Mobile Device Support, Bonjour and then Apple Application Support. I have done this numerous times. Can anyone help or offer suggestions. Using Windows Vista Home Premium SP2. Thanks.
StackHash error has something to do with VISTA's DEP (Data Execution Prevention)
I managed to get something online from Tech expert and hope this will resolve your issue. Good Luck!!
The StackHash error happens any time DEP is found that there is an issue with the program run. The error is related to Data Execution Prevention. Here’s how 99 percent of Vista and Win7 users can fix a StackHash failure:
Click the run button and open the Control Panel
Browse to the section of System Maintenance then to the System
At the left side, select Advanced System Settings link
In the System Properties Window the top section is named as Performance with the Settings button. Click this button.
Choose the Data Execution Prevention tab.
Select the option which reads Turn on DEP for all programs and services except those I select.
Use the Browse button to locate the executable file for the application you were trying to start when you received the StackHash error, and click Open to add it to your exceptions list.
Click Apply or OK to commit your changes.
Note: Nobody can guarantied you that described instruction will solve the 100% of the StackHash error issues but you can try it to resolve the problem. -
I updated my Itunes the other day and now, when clicking on the itunes icon, the program does not open?? I have tried uninstalling and reinstalling, resetting the computer, checking permissions, running as adminstrator.. nothing is working?? Help!!
Amazing steps you've done so far! The great news is this is very unlikely an issue with your iPhone.
I've run into a similar issue lately as well. I narrowed it down to one song that was causing 30 songs not to sync. I removed the song from the sync list (unchecked it) and all 29 songs were able to sync.
You may be running into a similar issue. This may be a problem with this version of iTunes, an issue with one song or a group of songs; hard to know for sure. It's important to narrow down and isolate the cause. Most imporantly get that music back on there!
The way to narrow down the casue add just a few songs at a time (even 1, just to get that first sync finished). Manually syncing is what you'll need here.
Plug in your iPhone, on the Summary screen (shows a picture of your iPhone, the iOS version, Restore iPhone....; etc). Under the Options area at the bottom choose to Manually Manage Videos and Music then choose Apply in the lower right. The music that's on your iPhone now should be removed from your iPhone now. You're now able to sync music manually.
The link below explains how to drag the songs from the iTunes library on the computer on to your iPhone which will start the sync. Add just one song just to see if you can get 1 of those hundreds of songs on there. If you can, awesome! Keep adding until you find the song or group of songs that are causing this issue.
http://support.apple.com/kb/HT1535
Please let me know how things are going.
Cheers! -
Bridge CC keeps crashing on start up but was working last week - Any Ideas how to get it back. Have tried uninstalling and re installing software. All other CC software working fine (Mac)
Also some problems since the CC2014... For me i can launch bridge but the crash occurs when i try to change access to any bridge preference... i open a discussion about it
-
When trying to print, adobe reader 11.0.07 keeps "Not responding" for 2 - 5 minutes before finally working? I have tried uninstalling and re-installing but same problem. What is going on? I have windows 7
First of all, why did you say yes to Nero Back up before researching what it does with files already on the HDD? When I install Nero, the Back Up is the first thing I disable, it is a nagging pain, there are much better backup programs available. There are several file recovery programs out there to recover deleted files, that is, if that is what happened. Also, if you haven't overwritten the files, so you should be able to find them.
-
Hi, I just installed my Creative Suite 6 and the programs close right after launching (for about 5 seconds) with no dialog box about an error. I have tried uninstalling and re-installing but still the same thing. Help pls!
Sign in, activation, or connection errors | CS5.5 and later
Mylenium -
I have tried uninstalling and re-installing iTunes and my pc still will not connect with the iTunes Store. I have tried just about every suggestion on the web to no avail, please help.
When I click on the store it just never opens, I do not receive any message. I try to "refresh the page" and nothing. While having the store selected I go to "help" and check for updates and i get a message; "The iTunes updatte server could not be contacted" and it prompts me to check my internet connection which is fine. None of the items under the "Store" respond with anything.
I ran a iTunes Diagnostics/ Under "Which Tests do you want to run" I check only "Network Connections" and the results that I receive is...
Network connectivity:
Network interfaces, verified
iTunes Store connectivity:
Internet connection, verified
Secure link to iTunes Store, FAILED
Does this help?
Maybe you are looking for
-
Data loader : Import -- creating duplicate records ?
Hi all, does anyone have also encountered the behaviour with Oracle Data Loader that duplicate records are created (also if i set the option: duplicatecheckoption=externalid) When i am checking the "import request queue - view" the request parameters
-
How to change Infoobject length in Datasource - Netweaver2004s
We are using Netweaver 2004s and when I try to load data using flatfile getting the below error. I have mapped legacy field HSTDRWMO of type NUMERIC 8 with BW field ZMONDRW of type QTY. I am getting the following error::: Error 'The argument ' .00
-
Upgrading from XI/PI7.0 to 7.1 having problems with message mapping
Hello, We are in the process over the past week of testing our XI/PI functionality after upgrading our 7.0 XI/PI environment to PI7.1; in particular several maps that were accessible in 7.0 will not open or diaplay in 7.1 complaining of a missing nod
-
Form extremely slow to fill in.
I have a form that I created and it is extremely slow to fill in. I created it on PC and fill it in on a Galaxy Tab S 10.5. I had a different version of same form and it filled out fine. It just printed way to light. I darkened the form and scanned i
-
Characters with accent in Sent Messages
In Mail, writting a message in french, why the following sentence with accents: "J'ai réfléchi à la meilleure solution pour cette opération" becomes in the Sent Messages "J'ai réfléchi à la meilleure solution pour cette opération" Is there any fon