About 5530, 5800 and x6 update

many people have started to insult and has to draw their own conclusions about the message in which you have modified these firmwares, responsible of nokia, please clarify this. what meaning that you change the date of day 25? Please Skyee you read this forums, can you respond?. thank you very much I'm using a nokia x6 and i will continue using it, many phones of today are spending the battery in one day, but my nokia x6 lasts 3 days and if i use it only for calls, my battery hold one week.
thank you very much nokia team
im spanish and im using google translate, sorry about the bad translation

See milesh, as i said, my code isn't listed in tht short list provided by our friend here.. but stil i have v52 and i updated via FOTA.. My phone isn't hacked.. These web developers are sleepin.. Winters after all.. Lol.
@kasvinda: hey, looks like my 3D echo working too... Yippeeeee. Lol.. Only livin room echo not working..
But i can live without tht.. Cheers..
Moderator note: section deleted whcih refers to another post which was removed.
Regards,
Dr. Shoubhik

Similar Messages

I've had my HTC Rhyme for about 4 months and it updated automatically to the software that was right before Google Play. When I try to update to Google Play, it says there's no service, but there is. What should I do?

I've had my HTC Rhyme for about 4 months and it updated automatically to the software that was right before Google Play. When I try to update to Google Play, it says there's no service, but there is. What should I do?

Hello!
No Play Store, sounds like no fun! Let's get this fixed! I would recommend trying the store in safe mode first. If that doesn't work a hard reset would be the next step. Here are the steps for both:
Safe Mode http://bit.ly/yAHjEJ
Hard Reset: http://bit.ly/xCo3Hk
Let us know if that works!
Katie H
VZW Support
Follow us on Twitter @VZWSupport

Please help, simple question about Smart Playlists and Live Updating

PLEASE for some reason I've never gotten an answer on this.
I have a Smart Playlist called "Recently Played" with Live Updating. No matter how I set the parameters, the most recently played *song will ALWAYS appear on the bottom of the list when using my iPhone on the go.* I bolded that because I want you to be aware I'm not talking about on iTunes - I'm aware you can change how the list is viewed on iTunes.
When using your iPod/iPhone on the fly and Live Updating is enabled, is there any way to make the most recently played song appear at the very top???
Thanks so much

Haven't seen that problem before but try the following: in iTunes, right-click the playlist name and enable the option "Copy to Play Order." Then sync.
The normal use of "Copy to Play Order" when you have the playlist displayed in iTunes in some sort order, but you want it to display in the iPod in shuffled order (as it will actually play). Different problem than you are observing, but the same thing "might" help.... Let us know.

About Nokia 5800 XpressMusic latest update

V52 has released, but on Nokia site says latest firmware is V51. Then i've contacted Nokia through above "contact us" link. They said "they don't know about V52. Latest is V51. And they said V52 coming soon". So i just wanna know is it a official update? Why site not updated yet?
Glad to help

See milesh, as i said, my code isn't listed in tht short list provided by our friend here.. but stil i have v52 and i updated via FOTA.. My phone isn't hacked.. These web developers are sleepin.. Winters after all.. Lol.
@kasvinda: hey, looks like my 3D echo working too... Yippeeeee. Lol.. Only livin room echo not working..
But i can live without tht.. Cheers..
Moderator note: section deleted whcih refers to another post which was removed.
Regards,
Dr. Shoubhik

Problems with 5800 and maps update.

Thats my problem. Using last firmware and its for long time being this problem.
Thanks for answer.

Hi viper_01
Nokia Maps Updater application no longer works and you should use OVI Suite on PC now.
Happy to have helped forum in a small way with a Support Ratio = 37.0

How about screen brightness and the update???

I have noticed my screen brightness to be lower after the update...I usally have it set to 50% and after then update was complete the brightness was alot lower on the same setting?? ANother person on mac forums had same issue

Try a different keyboard with your computer if possible. If it woks well, it's a hardware problem.
http://support.apple.com/kb/TS1381?viewlocale=en_US

Nokia Cancelled updates for X6, 5800 and 5530

Hi,
Nokia X6, 5800 and 5530 users please Stop dreaming about Updates, Nokia was not updating these devices
Please Check the below Site (Original Blog with nokia anouncement and is edited on 25-Aug-11)
http://www.conversations.nokia.com/2011/06/29/updates-to-symbian-3-2-and-5-0/
Shiva

i think some confusion is there & i request dont jump directly to the conclusion that nokia wont release the update for these models...by striking off these models from the list it means that these models wont receive that particular update which they have mentioned in the blogpost...
Maybe they are going to release a bigger & major firmware for these models...so dont jump the gun & wait for their response....i think Nokia will release the updates as promised cos models like 5230,5233,etc have got the updates then 5530,5800& x6 are more successful models..so i think nokia wont disappoint its large no. of users....
I request Nokia to please come forward & clear the air..

Whenever I go to preview a song in itunes, the song with play out for about 10 seconds and then stop. Why isn't the song previews working? How can I fix this? I tried updating my itunes and it didn't work.

Whenever I go to preview a song in itunes, the song with play out for about 10 seconds and then stop. Why isn't the song previews working? How can I fix this? I tried updating my itunes and it didn't work. I use windows 7. Thanks!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

HT201263 I went to do the latest update on my iphone 4s, and it said to connect to itunes so I did and continued to click restore and then it updated my phone through itunes. Then after about 40 minutes of it updating it still has the connect to itunes sc

I went to do the latest update on my iphone 4s, and it said to connect to itunes so I did and continued to click restore and then it updated my phone through itunes. Then after about 40 minutes of it updating it still has the connect to itunes screen on. It won't go away and I have tried restarting and turning off my phone various ways various times. I don't know what to do!

Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Note:
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download

I updated my xperia x10 to gingerbread 2.3 yesterday in india, but now It keeps on restarting after showing sony erricson logo, for about 6 hours and now it doesn't even charge..... Please help!!!

I updated my xperia x10 to gingerbread 2.3 yesterday in india, but now It keeps on restarting after showing sony erricson logo every 2 minutes, for about 6 hours and now it doesn't even charge..... Please help!!!

Try repairing ur phone..
its the same process as updated first time..
but this time click on repair..

HT201210 nowadays have many user have problem with update to ios7 and need active with apple id maybe in the future in order escape from these problems must be stop use these products else. Because of simple user don't know about this technology and somet

nowadays have many user have problem with update to ios7 and need active with apple id maybe in the future in order escape from these problems must be stop use these products else. Because of simple user don't know about this technology and sometime just hear from other user that it 's difficult to use then force they change phone that use to handle to another.

It is a feature to discourage the theft of iPhones by making them useless if resold. It's not going anywhere. It's simple: just don't buy a phone until you make sure that the activation lock has been disabled.

I'm trying to sync my phone to my computer and keep getting error message "1140" just when it's about to finish. My updates are current. Thoughts?

I'm trying to sync my phone to my computer and keep getting error message "1140" just when it's about to finish. My updates are current. Thoughts?

Hi hannijin,
What version of the Mac OS X do you have on your computer? The version of iTunes that you can install is dependent on the operating system that you have. For example, the current version of iTunes requires OS X version 10.7.5 or later.
Finding the OS X version and build information on your Mac - Apple Support
https://support.apple.com/en-us/HT201260
Apple - OS X Yosemite - How to Upgrade
https://www.apple.com/osx/how-to-upgrade/
Hope that helps ...
- Judy

Lion disables system info and software update in about this mac

hey guys I have problem with lion when I reboot lion,
it disables system info and software update in "about this mac"
actually it says "this button is disabled because there is no system profiler application" or "this button is disabled because there is no software update application"
and also everytime when I reboot my computer it always changes default applicatons. for example
it changes from VLC player to quicktime, from Archive utility to textEdit and so on.
each time i got to reinstall "Afloat application" if i want to use it.
for making them ok I just need to open software updater from system pref. and the button becomes visible again.
it is same with the system info. I gotto search system profiler via spotlight search and I run, button becomes visible again.
for the archieve utility i got to go to coreservices and open Archieve utility then automatically it becomes default app for .zip files again.
/___sbsstatic___/migration-images/170/17091900-1.png
http://imageshack.us/photo/my-images/689/screenshot20111225at659.png/

Did you just install Lion? If so, you might need to try to reinstall as something got messed up.
Alfoat uses SIMBL which will break at just about every update. The reason you may have to keep installing Afloat is because the Resume feature of Lion is not compatible with SIMBL. See here: http://roaringapps.com/app:383
SIMBL is a low-level system hack and may be causing your problems.

I have a macbook pro core i7 mid 2012 And update to the latest version 10.8.4 system after updating the system I have the problem appeared to take off the device and stops at the apple logo for about 5 minutes and then enters the desktop How can I solve t

I have a macbook pro core i7 mid 2012
And update to the latest version 10.8.4 system after updating the system I have the problem appeared to take off the device and stops at the apple logo for about 5 minutes and then enters the desktop How can I solve this problem and thank you

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

I'm trying to restore my iPod and the update says it's going to take 9 hours and then after 2 hours or less it will say something about "unable to finish update." Why is this?? My iPod is a 3rd generation that I got from my brother.

I'm trying to restore my iPod and the update says it's going to take 9 hours and then after 2 hours or less it will say something about "unable to finish update." Why is this?? My iPod is a 3rd generation that I got from my brother and even when I download an app that doesn't require my iPod to be an iOs 4.3, it will download, but it won't open.

Did you check your security software settings to be able to restore? iTunes for Windows: Troubleshooting security software issues

About 5530, 5800 and x6 update

Similar Messages

Maybe you are looking for