About Adobe Premiere Elements 11
I just purchased Adobe Premiere Element 11 from a local store and want to verify that I purchased the correct product for my needs so I can return before opening it if not. I noticed it has a lot of information about video editing. Does this product also allow for photo projects, such as creating collages adding overlays, etc.? Or is it mainly geared toward video editing? I am wondering if I should have purchased a software with photoshop in the name. This is strictly for amateur use and don't want to spend a lot of money on the higher end products.
Thank you.
For what you describe, I think that Photoshop Elements (unfortunately, the forum where you first posted), would be more like what you want.
That said, there is often a great "bundle price," for both Photoshop & Premiere Elements. The former is for Image manipulation, where the latter is for video, though does very well with Still Image SlideShows.
Good luck,
Hunt
Similar Messages
-
Adobe Premiere Elements 9 AIDE-HELP (menus)
I have the IMac 2013 i5.
When I'm working on Adobe Premiere ELements 9, the program is opening a message which is telling me that there's an error. Then the program closes. It ALWAYS happens when I'm trying to put a menu in my video. It is related to this action. I don't know what to do... I tried to uninstall the program but nothing changed unfortunatelly... I don't know if the problem's related to Adobe or to the IMac...
I'm also not able to install the latest Adobe Flash Player (12) on my IMac.
I really need some help please! Thank you!
J'ai un IMac 2013 i5.
Lorsque je travaille sur Adobe Premiere Elements 9, le logiciel m'envoie un message me disant que suite à une erreur grave, le programme doit se fermer. Ensuite, le logiciel se ferme et un rapport indéchiffrable portant sur le problème s'ouvre. Ceci arrive toujours dès que je veux ajouter un menu à mon montage. Lorsque j'ai sélectionné mon menu, je clique sur «Appliquer» et c'est exactement à ce moment que l'erreur apparait... Toujours à ce moment précis! J'ai tenté de désinstaller le logiciel pour le réinstaller par la suite... même probème malheureusement... Sur mon ancien portable, les menus pouvaient être appliqués sans problème mais il plantait toujours lors de la gravure. Mais depuis qu'il est sur mon nouvel ordi, les menus de vidéos ne foncionnent plus. Par contre, la gravure fonctione a merveille et le mac ne plante pas!
Je ne suis aussi pas capable d'installer Adobe Flash Reader afin de regarder des vidéos Youtube! J'ai encore là tenté plusieurs manoeuvres, mais rien n'a fonctionné...
J'ai vraiment besoin d'aide! Merci!rozrosie
About the 9.0.1 Update.
If you open a project to the workspace and go to Help Menu/Updates and click on Updates, do you see a 9.0.1 Update waiting for you to download and install it? You need to indicate in preference in that area if you want to be notified about updates in the menu bar. Otherwise, periodically you just check Help Menu/Updates to see what is there. You can also get the 9.0.1 Update online from Adobe and install it even with Premiere Elements 9 closed.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4930
About Adobe Premiere Elements Prefs
Adobe Premiere Elements Prefs is not a folder. It is a file.
As I wrote previously....
But, for the menu situation, I would still like know the results from deleting the Adobe Premiere Elements Prefs settings file with the following route
User
User Name
Libraries
Application Support
Adobe
Premiere Elements
9.0
and in the 9.0 Folder is the Adobe Premiere Elements Prefs file that you delete.
Can you find the above path and the Adobe Premiere Elements Prefs file in your Mac computer?
Do not delete anything unless it has the exact name Adobe Premiere Elements Prefs.
With Premiere Elements Windows, the user has to be set up with Folder Option Show Hidden Files, Folders, and Drives active so that the path can be seen. I do not have Mac. So, I would ask "Does the Mac have a feature which you can enable so that you can see Hidden Files, Folders, and Drives?" If so, please enable it to determine if you can see the path to the Adobe Premiere Elements Prefs file.
About the Titler and Styles
I wanted you to go to Premiere Elements 9.0/9.0.1 Timeline workspace, click on Title Menu/New Title/Default Still to open the Titler. In the Titler, I wanted to know if you saw the thumbnails for the Text Styles or were they all gone
Premiere Elements 9.0/9.0.1 Titler showing Text Styles
If you see them there and can successfully apply each to the text you have created in the Titler, that will give us information to evaluate the significance of your mention of an empty Styles Folder. If you see the Styles thumbnails, but cannot successfully apply them, then I will work with you on the Titler procedures.
Please let me know if you are OK with the details and what supplemental clarification you need.
Thank you.
ATR -
Do Mpeg2's work on Adobe Premiere Elements 1.0?
I don't know much about Adobe Premiere elements. I imported a MPEG2 into Premiere and it was fine in the preview screen but when I put into the timeline, it changed to a different color like green and blue. I was just wondering if anyone else has had this problem or know if Mpeg2s don't work in Premiere.
Thanks for any help you offer.The old PE1 did not handle MPEG files very well at all. The latest version PE7 handles them much better... but some folks still have some issues. Best bet is to convert your MPEGs to DV-AVI. See this FAQ on conversion:
http://www.adobeforums.com/webx/.3bc4800e -
I uninstalled my Adobe Photoshop Elements 11 and my Adobe Premiere Elements 11. I want to reinstall both of them. When I try to reinstall them something about my Roxio that is installed comes up. I knew this was going to be a bad day for me. Can somebody please help me. Thank you.
Hi. I was just going to mark my question solved. I don't know how I did it, but I want to thank you so much for trying to assist me.
-
Adobe Premiere Elements 10 takes about 6 minutes to open but then won't close
My old computer died so I am installing my Adobe Premiere Elements 10 on my new laptop with 8 gb Ram, 1 tb storage and Windows 8.1. When I click on the icon to open it it can take up to 5-6 minutes to open and if it does, when I try to close it, it won't close. I just get programs fails to respond. Can any body help me?
csu
What video card is your Windows 8.1 (assumed 64 bit) computer using? NVIDIA GeForce or other?
Please check the Device Manager/Display Adapters to confirm the video card/graphics card and how many cards.
Is the card driver version up to date according to the web site of the manufacturer of the card?
Are you working from a User Account with Administrative Privileges? And, do you have QuickTime (latest version) installed on
the computer with Premiere Elements?
Are you using a pen and tablet device instead of a mouse?
Does the problem exist with and without the antivirus and firewall(s) disabled?
Please consider the above and then we can decide what next.
Thank you.
ATR -
No Disk Error for Adobe Premiere Elements 12
I installed Adobe Premiere Elements 12 to my PC. Everytime I load the software, I get this annoying alert saying that there is no disk located error. I can get it to go away if I click on try again a bunch of times, but I want to get rid of this problem. It should NOT be happening. SOME BODY TELL ME WHAT TO DO PLEEAASE!
Blue Mask
Please check out recent thread which sought to solve the disc error message that appears to be similar to what you are reporting
http://forums.adobe.com/message/6246049#6246049
There was no definitive answer. Still waiting for follow up to the latest line of questions in that thread.
Suggestions about this being a long time issue are a bit misleading. In versions of Premiere Elements earlier than 12, there was a SmartSound/Sonicfire Pro 5 feature which appeared to be linked to the disc error message. And, updating SmartSound/Sonicfire Pro 5 was claimed to be the cause and remedy for the disc error message.
http://forums.adobe.com/thread/1300410
However, SmartSound/Sonicfire Pro 5 is no longer a feature in Premiere Elements 12. Premiere Elements 12 does have a Music Score feature, similar in principle to SmartSound soundtracks, but the SmartSound feature is gone in version 12.
Please review that information in the link above and let us know if any of it works for you.
Thank you.
ATR -
Adobe Premiere Elements 9 has encountered a problem and needs to close.
Adobe Premiere Elements 9 has encountered a problem and needs to close. Asked to be debugged no response an then the program don not respond.
If i Run an old project direct from the file PE 9 it works and then go to a new project it works but from the start up it just closes down.
Bridge is also starting to do itFrom the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
•What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 12 with the 12.0.1 update).
•What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac"
•Has this ever worked before? If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.? Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
•Are you using an account with Administrator Privileges?
Run as Administrator http://forums.adobe.com/thread/969395 (Encore + "All" Premiere)
•Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
•What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
•If you are getting error message(s), what is the full text of the error message(s)?
•What were you doing when the problem occurred?
•What other software are you running?
•Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive?
And some other questions...
•What are you editing, and does your video have a red line over it BEFORE you do any work?
•Which version of Quicktime do you have installed?
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
For Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us -
I am trying to use my adobe premiere elements 12 and when I go to click on a "new project" it takes me to the sign in page. Once I type my information in and click on "sign in" a little 'thinking circle' pops up and it just keeps spinning but it never ends up doing anything. Please help me with this issue. I really need to get this project started like yesterday. Thank you.
dplum12
What computer operating system is your Premiere Elements 12 running on? Did you have the opportunity to update 12 to 12.1 Update yet using an opened project's Help Menu/Update? If not, please do so when you get the opportunity.
For now I will assume that your computer is Windows 7, 8, or 8.1 64 bit. Please try the following suggestions to overcome your Premiere Elements Sign In issue.
http://www.atr935.blogspot.com/2014/04/pe12-premiere-elements-12-editor-will.html
and, if you get any messages about Internet connect and the computer clock, please review the following
http://www.atr935.blogspot.com/2014/04/pe12-sign-in-failure-connect-to.html
Please let us know the outcome.
Thank you.
ATR -
Adobe Premiere Elements 0.9 project crash, HELP!
This is the first time I am using these forums, so I hope I posted this in the right sektions.
I need help and solutions for a Project which constantly crashes on my Adobe Premiere Elements 0.9. This program has been awesome and helped me create some projects and videos successfully, up until.... well for about 3 days ago when my latest project crashed when I had just antered and checking the storyboard etc, triggering a "Serious Error" message and then it shuts down. I try again and again, but everytime I try to put something (any sound or video etc) on the storyboard and start working etc the same damn "Serious Error" message and then allways shuts down. It's allways this same and only project (which has worked fine before) that crashes like this...
In an attempt to first solve the problem myself I went through the Premiere Elements 9 files and deleted finnished projects and automatic saved process on projects etc, but still won't work even better... The funny thing is that when I open another project (a finnished project I left saved just in case) and go through the storyboard there and messes around a little and such, it won't crash nor trigger the same message as my latest project. And that program even has some effects on every footageclip on it too, but still it works fine. Haven't touched the program or the program until and since yesterday night to give it some rest but it still won't work, the project just keeps crashing like when and since it first started a few days ago.
I have also read through and tried some things from this Help/Troubleshoot page:
http://helpx.adobe.com/premiere-elements/kb/troubleshoot-damaged-projects-premiere-element s.html
I have so far been doing 1 and 2 of the "Beginning Troubleshooting", otherwise I have been reading it all and such. I am also kinda afraid to do the 3 of the first quests because I worked so hard on this project and even tough it just keeps crushing, I'm afraid to lose it. Other, I have deleted audios and such from my filegallery on my Adobe Premiere Eements, stuff I don't need anymore because its projects are already done. After I did that I also tried to create a new project just for testing. The amazing this about this is that this the new created project I created works just fine, I could do all kinds of the stuff, effects and advanced editing which I did on the same project before it started crushing. Tough I didn't save that test-project since I didn't find a reason to since it worked so good. And so the thing is that I can start and create a new project and start working and do usual stuff on it with no problem, same when I open up another project and do stuff, it all works just fine! It is just this one and only project that keeps crushing with this "Serious Error" message, all the time... Does anybody else have, or has had the same problem? What could the problem and error be and how to fix it?
This crushing project do has some effects on every footageclip/videoclip on it, to set the right mood for the musicvideo I'm making. I am making a musicvideo, and I haven't even done the half of the project/video. The song I am making this musicvideo with is about 00:07:32 in length, and (tough this detail may have no influence or meaning) the music is Symphonic Metal. The actual file of the song is 6,96 MB in size. This is also not the first time I've done such projects with such long songs on this same program either, one of my last videos I managed to successfully make and create a musicvideo with a song which was about 13 minutes and 30 seconds in length, and I also used effects on pretty much every videoclip on that project too.
The current filesize so far on the actual project.prel-file of my project that keeps crushing is 9.73 MB.
I am also using Adobe Premiere Elements and doing this troubleing, crashing project on a PC, a Fujitsu Windows (I believe Windows 7, or even updated to a newer version?). It has a regular ATI-card. The computer also has 2 modems and there's still some pretty GB amount free on them. The PC's main system also has a RAM in 6.00 GB and the operative system is the 64-bites.
In short, the PC should just fine be able to handle Adobe Premiere Elements 0.9 and all its projects, just as it has handled it all before plus all my PC games at that. So it must be something with my Adobe Premiere Elements and that specific project which is the problem, but what is the problem and the serious error and how to fix it?
Could it help to save and create the actual video in this crashing project, delete that project then start a new project, upload and put in the videofile of the crashing project in that new project and then continue from there?
In either cases, I need help with this. Please, help!Thanks so much for your reply, Steve!
Even tough I trust you guys enough here on the official Adobe site/forums to answer those questions as best I can, I am at the same time not very fond of giving away too much information because of safety. I understand I have to If I'm to recieve the accurate answers and solution, but as this is the internet you can never know. But again, I trust you guys enough on here and thus I'll try to answer those questions as best I can, even tough I am not very good with such stuff about computers. The PC I am using is also not only mine, it is the family computer also which me and my whole family uses.
The operating system on my computer (according to the computer propotions etc) is a 64-bites operating system and the computer/PC is also a Windows 7 Home Premium.
The processor the computer/PC have is a Intel(R) Core(TM) i5 CPU and the RAM is 6.00 GB. However, (and I hope I make this understandable because the computer/PC is in swedish)the subscore of RAM in the computer's Performance-Classification/Ranking is 7,5. The processor subscore is 7,3 per second. And the free space? Well, we have two modems, let's say a modem A and a modem B. Adobe Premiere Elements 0.9 is set to save all its stuff etc on modem B, while modem A is the main modem and spaces all main stuff and other things of the computer/PC. Modem A has about 314 GB of free space, while modem B has 207 GB of free space. Modem A's capacity is a total of 489 GB in which 175 GB has been used, the modems filesystem is a NTFS. Modem B is also a NTFS filesystem and its capacity is a total of 439 GB in which 232 GB has been used. And the Disk Cleanup? I believe my that latest ran it for about a few weeks ago. We also have a CCleaner also. But about the Disk Defragmenter, I have no idea. What exactly does a Disk Defragmenter do?
You mean, entering my project that keeps crushing and simply rename it by using "Save As"? If that is what you mean, I dunnow If that actually worked. When I still tried to do stuff and edit the crashing project (tough as said, it hardly took any changes and process before it triggered that message) and then crashed and shut down, and I opened up the program again (trying to open the same project that way), it asked me If I wanted to re-create the missing process from the last crash of the same project. I tried it and it automaticly was renamed to a for example Project.copy. But when I tried to work with that it was to no futher success, the project kept crashing. I haven't renamed the project by "Save As" tough, but I doubt it'll work, I even tried to rename the actual project file in the Adobe Premiere Elements files but nope... the project keeps crashing. But also about the same question, "Save As" under a new name but in its own folder? You mean the actual project folder or Adobe Premiere Elements preview folder of the projects?
My camcorder is pretty old by now, have had it since I turned 15, it has worked pretty good since then. Its model is a Sony Handycam, Carl Zeiss Vario-Tessar OPTICAL 20x. Even tough the last thing maybe doesn't say anything, this is all I know about my camcorder, except that it is a model no. DCR-HC17E PAL. But in that Project which keeps crashing, there are only a few actual camcorder clips used as I am making a Game-MusicVideo and most of the footage of the Video-game (actually a PC game) I'm making a musicvideo of is downloaded from Youtube mostly from a guy I asked permission for to download his recorded footage of the game. I used a Youtube downloader called ClipConverter. As I don't have a SD card I cannot make this footage myself. But some footage I recorded on my camcorder, but If I can find high quality clips and get them, I will. The other footages is actual official trailers of the PC games which also was downloaded from the net. But I can give you the stuffs filetypes and hoping that may help. The downloaded footage which was downloaded by this ClipConverter, are MP4 files. The other stuff (which were official trailers) and most of them are also MP4 files, the others are QuickTime-film files. Many of these downloaded footages and trailers are also in HD quality, at least some of them I think.
The actual filetype ofthe footage I myself recorded with my camcorder are, well.... it says Videoclip in the file. Maybe it is AVI?
The project settings? You mean the settings you set at first when starting as a new project? The general settings are, in editingsettings it is AVCHD 270p square pixel. This is kinda hard for me to tell since everything is in swedish in my program. But these settings has worked perfectly before, same with all files, footages and videoclips I have been using, also all the soundfiles etc. Even the actual crashing project worked perfectly before it started crashing... So why does it so suddenly start crashing now?
The audio is a song I copied directly from its album and CD into the computer/PC and it seems to be in WMA format in filetype.
And lastly, no I haven't rendered the timeline of the project ever, not even on my other projects. What does the rendering do and is useful for? I have very little knowledge of it. Other, I keep the Timeline mode open all the time because I can edit my videos much better with it, but perhaps that editing method make little influence of the actual problem.
Other, yesterday when writing the post and topic, I forgot to mention that I restarded my computer right after I created a new project, that testing project. When finnished with the testing I restarted the computer. Since then I haven't touched the crashing project since now tonight, when checking its settings for this post. I am also right now trying to create and save the actual videofile of it, saving it on my computer. I'll soon see If it's successful without any crashing interruptions, plus that the video itself works and is smooth when I'll play it on Windows Media Player like all the rest of my other videos. I do this just in case I must create a new project to be able to continue with my musicvideo, as the first part of it I worked very hard on.
Other and again, I am still puzzled about why this is even happening, that this project which worked perfectly fine before, just suddenly starts triggering that "Serious Error" message and crashes. And in this program which worked so perfect before. Has this happened to anyone else before? Has anyone else experienced the same issue I have? Is this a knowledgable issue which has solutions and ways to fix it?... :/ -
Adobe Premiere Elements 7.0 hangs while exporting and during peak file generation.
I have Adobe Premiere Elements 7.0 (PRE7). I have a project which is using a single clip from a Mini-DV that was captured with Nero 8. Nero 8 was used because it was captured prior to installing PRE7. The file is 12GB and is on a USB disk drive because I don't have the space on my main hard drive (I have about 11GB free). My project doesn't do too much that's fancy. It merely uses about 20 minutes of the 60 minute Mini-DV captured AVI, and it uses simple transitions between each scene. I also have very simple titles at start and end. No themes or anything else.
I've seen two problems. 1) While editing the project, seemingly (but I'm not positive it's related) while the peek file was being generated, PRE7 would get into a state of using about 40% to 50% CPU, and it would not let me do anything else. The other problem, 2) While using "Share" to export the video to WMA for playback on PC (about 180MB estimated file size according to Adobe), the file is exported to about the last remaining 5 seconds, but then PRE7 goes into that mode of hanging with 40% to 50% CPU usage.
One time when it had this 50% CPU issue, I let it sit overnight, and the export was finished in the morning. The export that time was to a 90MB FLV for posting to the "web" according to the Share wizard. But when I was doing the above (issue #2), it went into the 50% CPU usage but didn't finish after waiting around 2 hours. Even if I were to let it sit that time, and it were to finish, it seems like something's wrong and that this is unacceptable.
When this happens, and PRE7 goes into 50% CPU utilization, there is no pacifier or percentage bar advancing. It usually happens near 100% finished. Only one time did it complete successfully after leaving it unattended at 90% complete for an extraordinary amount of time.
To recap:
C:\ hard drive ---> PRE7, my project.
E:\ USB drive ---> 12GB source AVI file and destination for export.
I saw elsewhere on this forum that someone imported a mini-dv captured AVI into Window Movie Maker and then exported it to Mini-DV from that app. This solved that person's problem with hanging during peak file creation. I had the 50% hang issue during peak file generation but I'm not sure it was related to peak file generation. A peak file was generated in a project which, when exported with share as mentioned above, still did the hang 50% CPU issue. Regardless, I will try the import/export/movemaker thing and report back but I've been trying enough things that I wanted to take a second to ask for assistance.
Does anyone have this issue, and is there a patch or fix?
I might be able to provide a user mode dump of the 50% CPU adobe process. There is some call stack information and I'm wondering if developers would want this info if they don't already have a solution/fix to this bug.
Thanks for any help.I have some more info on the hang which I've been experiencing during export/share of a project which uses an AVI as its one main clip. Adobe Premiere Elements 7 (PRE7) appears to be hanging because it's looping endlessly in ImporterAVI.prm. I'm wondering if this info can be passed onto Adobe developers and/or if I can submit this information elsewhere for such processing. I also have a process dump file which might be helpful, not to mention the original project files.
I used Process Monitor to help analyze this situation, and prior to PRE7 getting into the endless loop, it appears to be reading from the AVI file little by little, and WMEncodingHelper.exe is writing out little by little to the destination file, both of which I would expect. When PRE7 gets to the end of the import/export, Process Monitor appears to show all the aforementioned disk activity ceasing. I see neither process reading or writing. This would be normal if the share/export procedure had completed. But PRE7 is not complete. It is hung and is operating at 50% CPU utilization.
Far below in this post are technical details which may be helpful to an Adobe developer determine why the importer could get into this endless loop. In those details, there is a jump instruction, "jb ImporterAVI!xImportEntry+0xf32", which will always jump if a particular compare always turns out a certain way. But in my review of the counters being compared, it never will get to a point of exiting. When I modify a flag (the carry flag) to be 0, the loop exits. When I did this, my export/share of my project completed successfully. So it was done, but for some reason, PRE7 was looping and looping in its AVI importor instead of completing the export (aka "Share").
I cannot say that this certainly indicates a bug with PRE7, but it seems to me that there's enough data for Adobe to be at least investigating this particular issue. I'm not the only person who has seen this as there was at least one other message describing the same problem which the user resolved by effectively re-creating the AVI file via a no-op import/export into and out of MovieMaker. My AVI also goes through MovieMaker, import/export, without a hitch.
In a sense, I view PRE7's "share" as essentially an import, processing of imported information (i.e., effects and transitions), and an export. It's an import of all clips into the project at the right times, a processing of all effects, and finally an export to a destination. I realize this is simplistic, but the point I'm making is I have a simple project with a single AVI, and it appears that the "import" portion of PRE7's Share option is choking on the only clip used by this project. I also don't have much but simple transitions and a beginning/ending title on the project, so I'm not thinking this use of PRE7 is much more than what I'm doing with MovieMaker when importing/exporting this AVI.
I fully agree that optimum hardware can be either required or critical for certain types of video editing, but PRE7 is a consumer program and I'm not using anything extensive about it and the symptoms are that PRE7 is looping on its import of a file other programs don't have a problem with. I already tried purchasing a 1TB external, which I'm glad I did, but I really think Adobe developers should look at this issue. There may be a problem with handling certain AVI clips used in a project when those clips come from certain sources. If there is an issue, perhaps it could warrant a fix that would make PRE7 more compatible with these other clips.
Does Adobe have a procedure for people to upload (or mail) projects and files to it so that they can troubleshoot why the importer gets into this state? I also mentioned earlier that I have a full user-mode dump of the process which may be of value to a dev. Can I submit this information anywhere?
Here are textual technical details:
Plug-in which loops: C:\Program Files\Adobe\Adobe Premiere Elements 7.0\Plug-ins\en_US\ImporterAVI.prm
The following are the instructions at the "bottom" of the loop which never ends. Below, I put "***" at the jump instruction I mentioned earler. If I force the carry flag to be 0 at that point, and the jump is skipped, the export completed successfully. Additionally, notice that [esp-0x1c] is 0x2000, and that both eax and edi are 0. When I see it loop, eax stays at 0 and never reaches 0x2000. I wonder if something about the AVI is causing values used by this importer to be such that it causes this endless loop, and if that's the case, and if such values are valid/good, I'm wondering if the importer can be fixed by being able to detect such values so as to not choke (if in fact it's an importer issue).
1239dda2 50 push eax
1239dda3 ffd1 call ecx
1239dda5 8b442424 mov eax,dword ptr [esp+24h]
1239dda9 015c2428 add dword ptr [esp+28h],ebx
1239ddad 03c7 add eax,edi
1239ddaf 83c410 add esp,10h
1239ddb2 3b44241c cmp eax,dword ptr [esp+1Ch]
1239ddb6 89442414 mov dword ptr [esp+14h],eax
; *** This is where it loops around and around.
1239ddba 0f82f2feffff jb ImporterAVI!xImportEntry+0xf32 (1239dcb2)
ImporterAVI!xImportEntry+0x1040:
1239ddc0 8b542420 mov edx,dword ptr [esp+20h]
1239ddc4 52 push edx
1239ddc5 e810d40000 call ImporterAVI!xImportEntry+0xe45a (123ab1da)
1239ddca 83c404 add esp,4
ImporterAVI!xImportEntry+0x104d:
1239ddcd 5f pop edi
1239ddce 5e pop esi
1239ddcf 5d pop ebp
1239ddd0 33c0 xor eax,eax
1239ddd2 5b pop ebx
1239ddd3 83c428 add esp,28h
1239ddd6 c3 ret
ChildEBP RetAddr Args to Child
WARNING: Stack unwind information not available. Following frames may be wrong.
3195d9b8 12387545 10590f9c 27c53e00 06b35ff6 ImporterAVI!xImportEntry+0x103a
3195d9ec 1239ea10 06b35ff6 00000000 27ad8a60 ImporterAVI+0x7545
3195da1c 1238aa31 06b3554b 00000000 7fdf0000 ImporterAVI!xImportEntry+0x1c90
00000000 00000000 00000000 00000000 00000000 ImporterAVI+0xaa31
[esp-1Ch]: 3195d9a0 00002000
eax=00000000 ebx=00000000 ecx=3195dbcc edx=00000000 esi=27ad8a60 edi=00000000
eip=1239ddba esp=3195d984 ebp=3c7ba50b iopl=0 nv up ei ng nz na pe cy
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000287
ImporterAVI!xImportEntry+0x103a:
1239ddba 0f82f2feffff jb ImporterAVI!xImportEntry+0xf32 (1239dcb2) [br=1] -
Can't open Adobe Premiere Elements 9
I've had some problems with Adobe Premiere Elements 9 recently, and right now I'm not able to use it. I'm not sure what the problem is really or how to fix it so I'll just write down what has happened here and hopefully someone knows what to do.
A week or so ago my laptop started to crash repeatedly, but fortunately that was solved. But then I noticed that when I opened Adobe Premiere Elements, that's when it crashed and only then. It stopped crashing altogether except for when I opened this program (if it is of any importance I also tried opening Windows Movie Maker to edit there in the meantime but the same thing happened there, which seems strange and kinda random to me). I decided to get an antivirus software and install that and see if that took care of it, which I have now done. That didn't exactly take care of it though. The laptop did stop crashing when opening the Adobe software, but nothing happens once it's opened. The tabs on the top right are there but the whole program is just grey (where you would normally have the timeline on the bottom, video to the left, and the files etc. to the right) and nothing else comes up. I then tried to uninstall Adobe Premiere Elements 9 from my laptop altogether and then re-install it with the CD I still had from purchasing the laptop a couple of years ago. But after re-installing there is no change. Just a grey screen once again, except for the tabs and all that on the top. Now I'm not sure what else to try. It's frustrating as I need this program to work right about now. Does anyone know what to do? Thanks.From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
•What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 12 with the 12.0.1 update).
•What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac"
•Has this ever worked before? If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.? Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
•Are you using an account with Administrator Privileges?
Run as Administrator http://forums.adobe.com/thread/969395 (Encore + "All" Premiere)
•Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
•What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
•If you are getting error message(s), what is the full text of the error message(s)?
•What were you doing when the problem occurred?
•What other software are you running?
•Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive?
And some other questions...
•What are you editing, and does your video have a red line over it BEFORE you do any work?
•Which version of Quicktime do you have installed?
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
For Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
Some of the below is for Premiere Pro, but the idea is the same for Premiere Elements
Dual video problems - Do you have dual graphics adapters?
Go to the Windows Control Panel and select Hardware and Sound and then select Device Manager... In Device manager you click the + sign to the left of Display Adapters... and see if 2 are listed
IF YES, read below
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2
-HP Fingerprint/Password conflict http://forums.adobe.com/thread/911575 -
Hello everybody
I have a new laptop and when I want to add a .mov movie to Adobe premiere elements, this error occures. Im trying to solve this problem now for days but I dont know how to continue. Im working with Windows XP, Version 2002, T2250, 0.99 RAM and an old Premiere elements 2004 version.
On my old computer I was able to add this same .mov movies, but not on the new one.
I also tried to convert this .mov movies, but the quality was to bad...
Does anybody know this problem? Im appreciating every little advice and help.
Thanks a lot
SabineSabine
Sorry for all the delays getting your thread moving forward. I suspect that it got lost in the daily thread traffic and Adobe's major updating of the forums.
Do your issues still exist. If they are the same as when you posted on May 8th, then
1. When you used HandBrake for the converslion of your .mov file, did you leave the Container = Mp4. And under Video Tab, did you set the Videc Codec = H.264 (x264)? All you needed to do at that point was dot the Constant for the frame rate and designate a frame rate and select the Start button and wait for the Queue Finished message in the progress bar at the bottom left of the HandBrake workspace.
2. What model iPhone is the video coming from? Your iPhone is probably giving you HD video (probably 1080p). So increasing the computer's installed RAM from 2.00 to 4 GB would be expected to help the overall workflow. Only if you have a 64 bit computer operating system, 8 GB installed would be even better. The 4 GB installed RAM is the maximum supported by a 32 bit computer operating system.
3. Specially for
The movie is stopping and jumping.
When you are playing back the Timeline content, are you looking at the "rendered Timeline"? Is there an red line over the content during that playback? If so, press the Enter key and wait for the render process to complete. This rendering process gives you the best possible preview of what you are seeing. The red line could be due to your editing the content, or it could be due to an incorrect selection of project settings. If you supply information about your video properties, we can suggest the best possible project settings. I do not recall seeing that you mentioned what version of Premiere Elements that you are using 1, 2, 3, 4 or other?
Please review the above and then let me know what supplemental information and/or clarification would help.
Thank you.
ATR -
'serious error' when creating a new project in adobe premiere elements 10
Hello,
I saw similar questions on the forums but not quite what is happening with me.
First off I should say i've never had this working however the copy of premiere elements 7 we had worked perfectly fine. I am a technician in a school and i'm trying to install the software for the students (we have lots of lisences). The software appears to install perfectly fine and the launcher works. I click to create a new project (or open an old one) premiere appears to load up correctly. It only crashes once I click to browse for a location to save the file.
The error message says, as i've noticed seems to be a generic message for any error on premiere: "Sorry, A serious error has occured that has caused Adobe Premiere Elements to shut down. We will attempt to save your current project"
At first I thought this was student user rights (as students do not have access to C:\) however I have since tried it with my own admin account which has full rights and effectively should be able to do anything and it still continues to crash.
The stations I am working with are:
Operating System
MS Windows XP Professional 32-bit SP3
CPU
Intel Pentium E5200 @ 2.50GHz
Wolfdale 45nm Technology
RAM
2.00 GB Dual-Channel DDR2 @ 400MHz (6-6-6-18)
Motherboard
Intel Corporation DQ43AP (CPU1)
Graphics
PLE2008HDS (1600x900@60Hz)
Intel(R) Q45/Q43 Express Chipset
Intel(R) Q45/Q43 Express Chipset
Hard Drives
156GB SAMSUNG SAMSUNG HD161GJ (SATA)
Thanks in advance to anyone who can provide some insight on this matter
~ AshThese previous discussions are not necessarily about PreElements, but they are about problems with trying to run on a network (which no flavor of Premiere is designed to do)
http://forums.adobe.com/thread/851602?tstart=0
http://forums.adobe.com/thread/771151?tstart=0
http://forums.adobe.com/thread/858977?tstart=0 -
So...
My Adobe Premiere elements 11 stopt working today...
Last time a used was yesturday and then it workt fine but now it keep saying "an incompatible graphics driver has been identified. If you want a faster and better playback performance update date you graftikdrivrutinen.
Information about grakifdrivrutin: ATI Technologics Inc. - AMD Radeon R7 200 Series 3.0.12618 Compatibility Profile Context 13.251.9001.1001"
And when the program starts my PC freeze.
And i have updated my AMD Radeon R7 as it says but same answer. And on my version of the AMD Radeon R7 is 13.251.9001.1001 and there is no more update for it but it was a update as it says but not anymore because i updated it to it.
Please help me =/
====================================================
Moved from Premiere Pro forum to Premiere Elements.Display driver & Baddriver http://forums.adobe.com/thread/1370916?tstart=0
-
Error generating movie Adobe Premiere Elements 11
Hello,
I recently upgraded from Adobe Premiere Elements 8 to 11 (11.0).
My system is Windows 7 Home Premium 32 bit, running on Intel Core 2 Duo @ 2.5 GHz, 4GB Ram, with 75GB free diskspace.
My input movies are AVCHD 1440x1080 25i video's (MTS files).
Everything is running fine. Editing goes smoothly (even smoother than when I was still using PE8). So in that sense I'm very satisfied and I think my system can handle it well. It doesn't seem to run out of memory, etc.
However, now I want to generate the output movie. The movie is about 10 minutes long and has some music and transitions under it. Previewing the movie goes fine.
I've tried uploading it to Youtube (HD 1440x1080 file). The progress monitor stays at 0% for 5 minutes and then suddenly goes 2 100% in a few seconds and afterwards starts to upload the movie. However, the movie that's actually uploaded contained only the first 4 seconds of the video. When I tried again, it was about 14 sec.
So, then I tried generating movies locally on the PC. I tried:
Adobe Flash HD 720p.
MPEG2 HDTV 1080i 25
MPEG2 PAL DVD Widescreen
and some other formats (can't exactly remember which).
All of them ended with errors: "Error compiling movie", with cause unknown.
So, I haven't been able to generate any movie and I can't find out why it fails.
Any recommendations?
Thanks,
MichielThese are not specifically for PreElements, but since other Adobe products have the same "core" in many instances, worth reading
As well as the below, right click the program icon and select Run as Administrator, which is NOT the same thing as running the computer with the Administrator account, and which fixes several "odd" problems... To create a two layer DVD (or a BluRay?), you MUST have Encore set to use the Run as Administrator option
Run as Administrator http://forums.adobe.com/thread/969395
Odd Errors http://forums.adobe.com/thread/670174
Long File Names or odd characters cause problems
Read http://forums.adobe.com/thread/588273
And #4 http://forums.adobe.com/thread/666558
And This Message Thread http://forums.adobe.com/thread/665641
Things and Software to AVOID when authoring/burning a DVD... says Encore, but also applies to Premiere Elements and disc burning
Start --> http://forums.adobe.com/thread/608660
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus http://forums.adobe.com/thread/562941
Create an ISO (Encore) or folder on your hard drive (Encore or Premiere Elements) and then use the FREE http://www.imgburn.com/index.php?act=download to write files or folders or ISO to disc for DVD or BluRay (send the author a PayPal donation if you like his program)
Imgburn will read the ACTUAL disc brand from the disc, which is not always the same as the box label (Memorex is notorious for buying "anything" and putting it inside a Memorex box)
When you write to disc with Imgburn, use the SLOWEST possible speed setting, so your burner has the best chance to create "good, well formed" laser burn holes... since no DVD player is required to read a burned disc, having a "good" one from a high quality blank will help
Use Taiyo Yuden single layer or Verbatim Two layer Or Falcon Pro for inkjet printable Two layer
Maybe you are looking for
-
Storing images on external hard drive but using iPhoto
Hi I am a new apple user so I'm trying to figure out how to use iPhoto. I think it's a great way to organize my photos but I've run into the problem of my hard drive getting to small for my images so I wan't to put all of my images on an external har
-
Workflow and POWL integration for Travel Request / Approval
HI, We are on EHP7 and using POWL for different kind of Approvals. POWL is working good for Leave Approval and we have used Workflow Task ID as : TS12300097 / TS12300116, and all leave request appearing in POWL for manager and approving them. Now we
-
i wonder if oracle 10g brings oracle's generic gateway, because i have to transport 40 million items from dbase IV (.dbf) to oracle i need the transport to be fast i don't know whatelse to use
-
When users are deleted from iMS 52, they are not deleted in ldap directory. How to delete the user completely? Have tried to delete with imadmin, followed by user purge it shows no users to purge and stiil user remains in ldap.
-
Hi, Can any one help me out with the Double Byte character isuue. The Japaneses Characters are getting printed over lapped inportal screens. Regards. Bharath Mohan N